Coverity complains that ECPGdebug is accessing debugstream without
holding debug_mutex, which is a fair complaint: we should take
debug_mutex while changing the settings ecpg_log looks at.
In some branches it also complains about unlocked use of simple_debug.
I think it's intentional and safe to have a quick unlocked check of
simple_debug at the start of ecpg_log, since that early exit will
always be taken in non-debug cases. But we should recheck
simple_debug after acquiring the mutex. In the worst case, calling
ECPGdebug concurrently with ecpg_log in another thread could result
in a null-pointer dereference due to debugstream transiently being
NULL while simple_debug isn't 0.
This is largely hypothetical, since it's unlikely anybody uses
ECPGdebug() at all in the field, and our own regression tests
don't seem to be hitting the theoretical race conditions either.
Still, if we're going to the trouble of having mutexes here, we ought
to be using them in a way that's actually safe not just almost safe.
Hence, back-patch to all supported branches.
Underscores were added to numeric literals in faff8f8e47. This change
also affected the positional parameters (e.g., $1) rule, which uses
the same production for its digits. But this did not actually work,
because the digits for parameters are processed using atol(), which
does not handle underscores and ignores whatever it cannot parse.
The underscores notation is probably not useful for positional
parameters, so for simplicity revert that rule to its old form that
only accepts digits 0-9.
Author: Erik Wienhold <ewie@ewie.name>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/5d216d1c-91f6-4cbe-95e2-b4cbd930520c%40ewie.name
The code associated with EXEC SQL DEFINE was unreadable and full of
bugs, notably:
* It'd attempt to free a non-malloced string if the ecpg program
tries to redefine a macro that was defined on the command line.
* Possible memory stomp if user writes "-D=foo".
* Undef'ing or redefining a macro defined on the command line would
change the state visible to the next file, when multiple files are
specified on the command line. (While possibly that could have been
an intentional choice, the code clearly intends to revert to the
original macro state; it's just failing to consider this interaction.)
* Missing "break" in defining a new macro meant that redefinition
of an existing name would cause an extra entry to be added to the
definition list. While not immediately harmful, a subsequent undef
would result in the prior entry becoming visible again.
* The interactions with input buffering are subtle and were entirely
undocumented.
It's not that surprising that we hadn't noticed these bugs,
because there was no test coverage at all of either the -D
command line switch or multiple input files. This patch adds
such coverage (in a rather hacky way I guess).
In addition to the code bugs, the user documentation was confused
about whether the -D switch defines a C macro or an ecpg one, and
it failed to mention that you can write "-Dsymbol=value".
These problems are old, so back-patch to all supported branches.
Discussion: https://postgr.es/m/998011.1713217712@sss.pgh.pa.us
ecpg wants to emit a warning if it parses a SQL construct that the
backend can parse but will immediately throw a FEATURE_NOT_SUPPORTED
error for. The way it was testing for this was to see if the string
ERRCODE_FEATURE_NOT_SUPPORTED appeared anywhere in the gram.y code.
This is, of course, not nearly good enough, as there are plenty of
rules in gram.y that throw that error only conditionally. There was
a hack dating to 2008 to suppress the warning in one rule that
doesn't even exist anymore, but nothing for other cases we've created
since then. End result was that you could get "unsupported feature
will be passed to server" warnings while compiling perfectly good SQL
code in ecpg. Somehow we'd not heard complaints about this, but
it was exposed by the recent addition of an ecpg test for a SQL/JSON
construct.
To fix, suppress the warning if the rule contains any "if" statement.
Manual comparison of gram.y with the generated preproc.y file shows
that the warning is now emitted only in rules where it's sensible.
This problem has existed for a long time, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/603615.1712245382@sss.pgh.pa.us
If we are building with openssl but USE_SSL_ENGINE didn't get set,
initialize_SSL's variable "pkey" is declared but used nowhere.
Apparently this combination hasn't been exercised in the buildfarm
before now, because I've not seen this warning before, even though
the code has been like this a long time. Move the declaration
to silence the warning (and remove its useless initialization).
Per buildfarm member sawshark. Back-patch to all supported branches.
In OpenSSL 3.0.0 and later, ERR_reason_error_string randomly refuses
to provide a string for error codes representing system errno values
(e.g., "No such file or directory"). There is a poorly-documented way
to extract the errno from the SSL error code in this case, so do that
and apply strerror, rather than falling back to reporting the error
code's numeric value as we were previously doing.
Problem reported by David Zhang, although this is not his proposed
patch; it's instead based on a suggestion from Heikki Linnakangas.
Back-patch to all supported branches, since any of them are likely
to be used with recent OpenSSL.
Discussion: https://postgr.es/m/b6fb018b-f05c-4afd-abd3-318c649faf18@highgo.ca
intoasc(), a wrapper for PGTYPESinterval_to_asc that converts an
interval to its textual representation, used a plain memcpy() when
copying its result. This could miss a zero-termination in the result
string, leading to an incorrect result.
The routines in informix.c do not provide the length of their result
buffer, which would allow a replacement of strcpy() to safer strlcpy()
calls, but this requires an ABI breakage and that cannot happen in
back-branches.
Author: Oleg Tselebrovskiy
Reviewed-by: Ashutosh Bapat
Discussion: https://postgr.es/m/bf47888585149f83b276861a1662f7e4@postgrespro.ru
Backpatch-through: 12
We previously supposed that it was okay for different threads to
call bindtextdomain() concurrently (cf. commit 1f655fdc3).
It now emerges that there's at least one gettext implementation
in which that triggers an abort() crash, so let's stop doing that.
Add mutexes guarding libpq's and ecpglib's calls, which are the
only ones that need worry about multithreaded callers.
Note: in libpq, we could perhaps have piggybacked on
default_threadlock() to avoid defining a new mutex variable.
I judge that not terribly safe though, since libpq_gettext could
be called from code that is holding the default mutex. If that
were the first such call in the process, it'd fail. An extra
mutex is cheap insurance against unforeseen interactions.
Per bug #18312 from Christian Maurer. Back-patch to all
supported versions.
Discussion: https://postgr.es/m/18312-bbbabc8113592b78@postgresql.org
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
Commit b8ba7344e9 added in PQgetResult a derefence to a pointer
returned by pqPrepareAsyncResult(), before some other code that was
already testing that pointer for nullness. But since commit
618c16707a (in Postgres 15), pqPrepareAsyncResult() doesn't ever
return NULL (a statically-allocated result is returned if OOM). So in
branches 15 and up, we can remove the redundant pointer check with no
harm done.
However, in branch 14, pqPrepareAsyncResult() can indeed return NULL if
it runs out of memory. Fix things there by adding a null pointer check
before dereferencing the pointer. This should hint Coverity that the
preexisting check is not redundant but necessary.
Backpatch to 14, like b8ba7344e9.
Per Coverity.
OpenSSL will sometimes return SSL_ERROR_SYSCALL without having set
errno; this is apparently a reflection of recv(2)'s habit of not
setting errno when reporting EOF. Ensure that we treat such cases
the same as read EOF. Previously, we'd frequently report them like
"could not accept SSL connection: Success" which is confusing, or
worse report them with an unrelated errno left over from some
previous syscall.
To fix, ensure that errno is zeroed immediately before the call,
and report its value only when it's not zero afterwards; otherwise
report EOF.
For consistency, I've applied the same coding pattern in libpq's
pqsecure_raw_read(). Bare recv(2) shouldn't really return -1 without
setting errno, but in case it does we might as well cope.
Per report from Andres Freund. Back-patch to all supported versions.
Discussion: https://postgr.es/m/20231208181451.deqnflwxqoehhxpe@awork3.anarazel.de
The logic to keep the libpq command queue in sync with queries that have
been processed had a bug when errors were returned for reasons other
than problems in queries -- for example, when a connection is lost. We
incorrectly consumed an element from the command queue every time, but
this is wrong and can lead to the queue becoming empty ahead of time,
leading to later malfunction: PQgetResult would return nothing,
potentially causing the calling application to enter a busy loop.
Fix by making the SYNC queue element a barrier that can only be consumed
when a SYNC message is received.
Backpatch to 14.
Reported by: Иван Трофимов (Ivan Trofimov) <i.trofimow@yandex.ru>
Discussion: https://postgr.es/m/17948-fcace7557e449957@postgresql.org
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
The libpq code in charge of creating per-connection SSL objects was
prone to a race condition when loading the custom BIO methods needed by
my_SSL_set_fd(). As BIO methods are stored as a static variable, the
initialization of a connection could fail because it could be possible
to have one thread refer to my_bio_methods while it is being manipulated
by a second concurrent thread.
This error has been introduced by 8bb14cdd33, that has removed
ssl_config_mutex around the call of my_SSL_set_fd(), that itself sets
the custom BIO methods used in libpq. Like previously, the BIO method
initialization is now protected by the existing ssl_config_mutex, itself
initialized earlier for WIN32.
While on it, document that my_bio_methods is protected by
ssl_config_mutex, as this can be easy to miss.
Reported-by: Willi Mann
Author: Willi Mann, Michael Paquier
Discussion: https://postgr.es/m/e77abc4c-4d03-4058-a9d7-ef0035657e04@celonis.com
Backpatch-through: 12
When using GSSAPI encryption in non-blocking mode, libpq sometimes
failed with "GSSAPI caller failed to retransmit all data needing
to be retried". The cause is that pqPutMsgEnd rounds its transmit
request down to an even multiple of 8K, and sometimes that can lead
to not requesting a write of data that was requested to be written
(but reported as not written) earlier. That can upset pg_GSS_write's
logic for dealing with not-yet-written data, since it's possible
the data in question had already been incorporated into an encrypted
packet that we weren't able to send during the previous call.
We could fix this with a one-or-two-line hack to disable pqPutMsgEnd's
round-down behavior, but that seems like making the caller work around
a behavior that pg_GSS_write shouldn't expose in this way. Instead,
adjust pg_GSS_write to never report a partial write: it either
reports a complete write, or reflects the failure of the lower-level
pqsecure_raw_write call. The requirement still exists for the caller
to present at least as much data as on the previous call, but with
the caller-visible write start point not moving there is no temptation
for it to present less. We lose some ability to reclaim buffer space
early, but I doubt that that will make much difference in practice.
This also gets rid of a rather dubious assumption that "any
interesting failure condition (from pqsecure_raw_write) will recur
on the next try". We've not seen failure reports traceable to that,
but I've never trusted it particularly and am glad to remove it.
Make the same adjustments to the equivalent backend routine
be_gssapi_write(). It is probable that there's no bug on the backend
side, since we don't have a notion of nonblock mode there; but we
should keep the logic the same to ease future maintenance.
Per bug #18210 from Lars Kanis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18210-4c6d0b14627f2eb8@postgresql.org
When PQsendFlushRequest() was added by commit 69cf1d5429, we argued
against adding a PQflush() call in it[1]. This is still the right
decision: if the user wants a flush to occur, they can just call that.
However, we failed to realize that the message bytes could still be
given to the kernel for transmitting when this can be made without
blocking. That's what pqPipelineFlush() does, and it is done for every
single other message type sent by libpq, so do that.
(When the socket is in blocking mode this may indeed block, but that's
what all the other libpq message-sending routines do, too.)
[1] https://www.postgresql.org/message-id/202106252352.5ca4byasfun5%40alvherre.pgsql
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQTxZRevRWkKodE-SnJk1Yfm4eKT+8E4Cyq3MJ9YKTnNew@mail.gmail.com
This file was missed in the previous update.
Source-Git-URL: ssh://git@git.postgresql.org/pgtranslation/messages.git
Source-Git-Hash: de944161c6153124a7bf720cb99823ff31b64bab
fe-auth.c references CHAR_BIT since commit 3a465cc67, but it
did not #include <limits.h>, which per POSIX is where that
symbol is defined. This escaped notice so far because
(a) on most platforms, <sys/param.h> pulls in <limits.h>,
(b) even if yours doesn't, OpenSSL pulls it in, so compiling
with --with-openssl masks the omission.
Per bug #18026 from Marcel Hofstetter. Back-patch to v16.
Discussion: https://postgr.es/m/18026-d5bb69f79cd16203@postgresql.org
This applies the new error message API from commit 0873b2d354 to the
changes introduced by bbf9c282ce. The latter was committed shortly
after the former, so it probably didn't get the news in time.
Eventually it is likely worth trying to deal with this in a more expansive
way, by generating dependency files generated within the scripts. But it's not
entirely obvious how to do that in perl and is work more suitable for 17
anyway.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/87v8g7s6bf.fsf@wibble.ilmari.org
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit 6df7a9698b accidentally included two identical prototypes for
default_multirange_selectivi() and commit 086cf1458c added a break;
statement where one was already present, thus duplicating it. While
there is no bug caused by this, fix by removing the duplicated lines
as they provide no value.
Backpatch the fix for duplicate prototypes to v14 and the duplicate
break statement fix to all supported branches to avoid backpatching
hazards due to the removal.
Reported-by: Anton Voloshin <a.voloshin@postgrespro.ru>
Discussion: https://postgr.es/m/0e69cb60-0176-f6d0-7e15-6478b7d85724@postgrespro.ru
The errormessage for an incorrect require_auth method wasn't using the
common "invalid %s value" errormessage which lessens the burden on our
translators. Fix by changing to that format to make use of existing
translations and to make error messages consistent in wording.
Reported and fixed by Gurjeet Singh with some tweaking by myself.
Author: Gurjeet Singh <gurjeet@singh.im>
Discussion: https://postgr.es/m/CABwTF4Xu3g9zohJ9obu8m7MKbf8g63NgpRDjwqPHQgAtB+Gb8Q@mail.gmail.com
The error message for a missing or invalid system CA when using
sslrootcert=system differs based on the OpenSSL version used.
In OpenSSL 1.0.1-3.0 it is reported as SSL Error, with varying
degrees of helpfulness in the error message. With OpenSSL 3.1 it
is reported as an SSL SYSCALL error with "Undefined error" as
the error message. This fix pulls out the particular error in
OpenSSL 3.1 as a certificate verify error in order to help the
user better figure out what happened, and to keep the ssl test
working. While there is no evidence that extracing the errors
will clobber errno, this adds a guard against that regardless
to also make the consistent with how we handle OpenSSL errors
elsewhere. It also memorizes the output from OpenSSL 3.0 in
the test in cases where the system CA isn't responding.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/c39be3c5-c1a5-1e33-1024-16f527e251a4@enterprisedb.com
When compiled with -C ORACLE, ecpg_get_data() had a one-off issue where
it would incorrectly store the null terminator byte to str[-1] when
varcharsize is 0, which is something that can happen when using SQLDA.
This would eat 1 byte from the previous field stored, corrupting the
results generated.
All the callers of ecpg_get_data() estimate and allocate enough storage
for the data received, and the fix of this commit relies on this
assumption. Note that this maps to the case where no padding or
truncation is required.
This issue has been introduced by 3b7ab43 with the Oracle compatibility
option, so backpatch down to v11.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20230410.173500.440060475837236886.horikyota.ntt@gmail.com
Backpatch-through: 11
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
- At the last minute and for no particularly good reason, I changed the
WITHOUT token to be marked especially for lookahead, from the one in
WITHOUT TIME to the one in WITHOUT UNIQUE. Study of upcoming patches
(where a new WITHOUT ARRAY WRAPPER clause is added) showed me that the
former was better, so put it back the way the original patch had it.
- update exprTypmod() for JsonConstructorExpr to return the typmod of
the RETURNING clause, as a comment there suggested. Perhaps it's
possible for this to make a difference with datetime types, but I
didn't try to build a test case.
- The nodeFuncs.c support code for new nodes was calling walker()
directly instead of the WALK() macro as introduced by commit 1c27d16e6e.
Modernize that. Also add exprLocation() support for a couple of nodes
that missed it. Lastly, reorder the code more sensibly.
The WITHOUT_LA -> WITHOUT change means that stored rules containing
either WITHOUT TIME ZONE or WITHOUT UNIQUE KEYS would change
representation. Therefore, bump catversion.
Discussion: https://postgr.es/m/20230329181708.e64g2tpy7jyufqkr@alvherre.pgsql
