the isTrigger state explicitly, not rely on nonzero-ness of trigrelOid
to indicate trigger-hood, because trigrelOid will be left zero when compiling
for validation. The (useless) function hash entry built by the validator
was able to match an ordinary non-trigger call later in the same session,
thereby bypassing the check that is supposed to prevent such a call.
Per report from Alvaro.
It might be worth suppressing the useless hash entry altogether, but
that's a bigger change than I want to consider back-patching.
Back-patch to 8.0. 7.4 doesn't have the problem because it doesn't
have validation mode.
use the old relfilenode in the new tablespace. There might be another relation
in the new tablespace with the same relfilenode, so we must generate a fresh
relfilenode in the new tablespace.
The 8.3 patch to let deleted relation files linger as zero-length files until
the next checkpoint made this more obvious: moving a relation from one table
space another, and then back again, caused a collision with the lingering
file.
Back-patch to 8.1. The issue is present in 8.0 as well, but it doesn't seem
worth fixing there, because we didn't have protection from OID collisions
after OID wraparound before 8.1.
Report by Guillaume Lelarge.
a SubLink expression into a rule query. We missed cases where the original
query contained a sub-SELECT in a function in FROM, a multi-row VALUES list,
or a RETURNING list. Per bug #4434 from Dean Rasheed and subsequent
investigation.
Back-patch to 8.1; older releases don't have the issue because they didn't
try to be smart about setting hasSubLinks only when needed.
forestalls potential overflow when the same table (or other object, but
usually tables) is accessed by very many successive queries within a single
transaction. Per report from Michael Milligan.
Back-patch to 8.0, which is as far back as the patch conveniently applies.
There have been no reports of overflow in pre-8.3 releases, but clearly the
risk existed all along. (Michael's report suggests that 8.3 may consume lock
counts faster than prior releases, but with no test case to look at it's hard
to be sure about that. Widening the counts seems a good future-proofing
measure in any event.)
whenever possible, as per bug report from Oleg Serov. While at it, reorder
the operations in the RECORD case to avoid possible palloc failure while the
variable update is only partly complete.
Back-patch as far as 8.1. Although the code of the particular function is
similar in 8.0, 8.0's support for composite fields in rows is sufficiently
broken elsewhere that it doesn't seem worth fixing this.
at once and ItemPointers are collected in memory.
Remove tuple's killing by killtuple() if tuple was moved to another
page - it could produce unaceptable overhead.
Backpatch up to 8.1 because the bug was introduced by GiST's concurrency support.
returns NULL instead of a PGresult. The former coding would fail, which
is OK, but it neglected to give you the PQerrorMessage that might tell
you why. In the oldest branches, there was another problem: it'd sometimes
report PQerrorMessage from the wrong connection.
INSERT or UPDATE will match the target table's current rowtype. In pre-8.3
releases inconsistency can arise with stale cached plans, as reported by
Merlin Moncure. (We patched the equivalent hazard on the SELECT side in Feb
2007; I'm not sure why we thought there was no risk on the insertion side.)
In 8.3 and HEAD this problem should be impossible due to plan cache
invalidation management, but it seems prudent to make the check anyway.
Back-patch as far as 8.0. 7.x versions lack ALTER COLUMN TYPE, so there
seems no way to abuse a stale plan comparably.
would work, but in fact it didn't return the same rows when moving backwards
as when moving forwards. This would have no visible effect in a DISTINCT
query (at least assuming the column datatypes use a strong definition of
equality), but it gave entirely wrong answers for DISTINCT ON queries.
fixes made during the 8.2 development cycle, but not backported at the time
for lack of confidence in the new coding.
I didn't touch 7.4 because it has more problems than this: the configure
probe for Python fails.
bug #4290. The fundamental bug is that masking extParam by outer_params,
as finalize_plan had been doing, caused us to lose the information that
an initPlan depended on the output of a sibling initPlan. On reflection
the best thing to do seemed to be not to try to adjust outer_params for
this case but get rid of it entirely. The only thing it was really doing
for us was to filter out param IDs associated with SubPlan nodes, and that
can be done (with greater accuracy) while processing individual SubPlan
nodes in finalize_primnode. This approach was vindicated by the discovery
that the masking method was hiding a second bug: SS_finalize_plan failed to
remove extParam bits for initPlan output params that were referenced in the
main plan tree (it only got rid of those referenced by other initPlans).
It's not clear that this caused any real problems, given the limited use
of extParam by the executor, but it's certainly not what was intended.
I originally thought that there was also a problem with needing to include
indirect dependencies on external params in initPlans' param sets, but it
turns out that the executor handles this correctly so long as the depended-on
initPlan is earlier in the initPlans list than the one using its output.
That seems a bit of a fragile assumption, but it is true at the moment,
so I just documented it in some code comments rather than making what would
be rather invasive changes to remove the assumption.
Back-patch to 8.1. Previous versions don't have the case of initPlans
referring to other initPlans' outputs, so while the existing logic is still
questionable for them, there are not any known bugs to be fixed. So I'll
refrain from changing them for now.
log message at newlines cost O(N^2) for very long messages with few or no
newlines. For messages in the megabyte range this became the dominant cost.
Per gripe from Achilleas Mantzios.
Patch all the way back, since this is a safe change with no portability
risks. I am also thinking of increasing PG_SYSLOG_LIMIT, but that should
be done separately.
results always contribute two groups, regardless of the expression contents.
This is very substantially more accurate than the regular heuristic for
certain boolean tests like "col IS NULL". Per gripe from Sam Mason.
Back-patch to all supported releases, since the behavior of
estimate_num_groups() hasn't changed all that much since 7.4.
the timezone argument as a timezone abbreviation, and only try it as a full
timezone name if that fails. The zic database has four zones (CET, EET, MET,
WET) that are full daylight-savings zones and yet have names that are the
same as their abbreviations for standard time, resulting in ambiguity.
In the timestamp input functions we resolve the ambiguity by preferring the
abbreviation, and AT TIME ZONE should work the same way. (No functionality
is lost because the zic database also has other names for these zones, eg
Europe/Zurich.) Per gripe from Jaromir Talir.
Backpatch to 8.1. Older releases did not have the issue because AT TIME ZONE
only accepted abbreviations not zone names. (Thus, this patch also arguably
fixes a compatibility botch introduced at 8.1: in ambiguous cases we now
behave the same as 8.0 did.)
timezone setting in the current year and for 100 years back, rather than
always examining years 1904-2004. The original coding would have problems
distinguishing zones whose behavior diverged only after 2004; which is a
situation we will surely face sometime, if it's not out there already.
In passing, also prevent selection of the dummy "Factory" timezone, even
if that's exactly what the system is using. Reporting time as GMT seems
better than that.
1. Directly reading interp->result is deprecated in Tcl 8.0 and later;
you're supposed to use Tcl_GetStringResult. This code finally broke with
Tcl 8.5, because Tcl_GetVar can now have side-effects on interp->result even
though it preserves the logical state of the result. (There's arguably a
Tcl issue here, because Tcl_GetVar could invalidate the pointer result of a
just-preceding Tcl_GetStringResult, but I doubt the Tcl guys will see it as
a bug.)
2. We were being sloppy about the encoding of the result: some places would
push database-encoding data into the Tcl result, which should not happen,
and we were assuming that any error result coming back from Tcl was in the
database encoding, which is not a good assumption.
3. There were a lot of calls of Tcl_SetResult that uselessly specified
TCL_VOLATILE for constant strings. This is only a minor performance issue,
but I fixed it in passing since I had to look at all the calls anyway.
#2 is a live bug regardless of which Tcl version you are interested in,
so back-patch even to branches that are unlikely to be used with Tcl 8.5.
I went back as far as 8.0, which is as far as the patch applied easily;
7.4 was using a different error processing scheme that has got its own
problems :-(
patches that dealt with object ownership. It wasn't updating pg_shdepend
nor adjusting the aggregate's ACL. In 8.2 and up, fix this permanently
by making it use AlterFunctionOwner_oid. In 8.1, the function code wasn't
factored that way, so just copy and paste.
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
require SELECT privilege as well, since you normally need to read existing
column values within such commands. This behavior is according to spec,
but we'd never documented it before. Per gripe from Volkan Yazici.
current transaction has any open references to the target relation or index
(implying it has an active query using the relation). Also back-patch the
8.2 fix that prohibits TRUNCATE and CLUSTER when there are pending
AFTER-trigger events. Per suggestion from Heikki.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
cases. Recent buildfarm experience shows that it is sometimes possible
to execute several SQL commands in less time than the granularity of
Windows' not-very-high-resolution gettimeofday(), leading to a failure
because the tests expect the value of now() to change and it doesn't.
Also, it was recognized some time ago that the same area of the tests
could fail if local midnight passes between the insertion and the checking
of the values for 'yesterday', 'tomorrow', etc. Clean all this up per
ideas from myself and Greg Stark.
There remains a window for failure if the transaction block is entered
exactly at local midnight (so that 'now' and 'today' have the same value),
but that seems low-probability enough to live with.
Since the point of this change is mostly to eliminate buildfarm noise,
back-patch to all versions we are still actively testing.
to go beoynd 10MB, as demonstrated by Gavin Sharry's example of dropping a
schema with ~25000 objects. The really bogus thing about the limit was that
it was enforced when a state file file was read in, not when it was written,
so you would end up with a prepared transaction that you can't commit or
abort, and the only recourse was to shut down the server and remove the file
by hand.
Raise the limit to MaxAllocSize, and enforce it also when a state file is
written. We could've removed the limit altogether, but reading in a file
larger than MaxAllocSize would fail anyway because we read it into a
palloc'd buffer.
Backpatch down to 8.1, where 2PC and this issue was introduced.
varoattno along with varattno. This resulted in having Vars that were not
seen as equal(), causing inheritance of the "same" constraint from different
parent relations to fail. An example is
create table pp1 (f1 int check (f1>0));
create table cc1 (f2 text, f3 int) inherits (pp1);
create table cc2(f4 float) inherits(pp1,cc1);
Backpatch as far as 7.4. (The test case still fails in 7.4, for reasons
that I don't feel like investigating at the moment.)
This is a backpatch commit only. The fix will be applied in HEAD as part
of the upcoming pg_constraint patch.
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
version ones, to make it clear to users just browsing the notes
that there are a lot more changes available from whatever version
they are at than what's in the minor version release notes.
