exec_save_simple_expr did not account for the possibility that
standard_planner would stick a Materialize node atop the plan
of even a simple Result, if CURSOR_OPT_SCROLL is set. This led
to an "unexpected plan node type" error.
This is a very old bug, but it'd only be reached by declaring a
cursor for a "SELECT simple-expression" query and explicitly
marking it scrollable, which is an odd thing to do. So the lack
of prior reports isn't too surprising.
Bug: #18859
Reported-by: Olleg Samoylov <splarv@ya.ru>
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18859-0d5f28ac99a37059@postgresql.org
Backpatch-through: 13
pg_drop_replication_slot() can drop replication slots created on
a different database than the one where it is executed. This behavior
has been in place since PostgreSQL 9.4, when pg_drop_replication_slot()
was introduced.
However, commit ff539d mistakenly added the following incorrect
description in the documentation:
For logical slots, this must be called when connected to
the same database the slot was created on.
This commit removes that incorrect statement. A similar mistake was
also present in the documentation for the DROP_REPLICATION_SLOT
command, which has now been corrected as well.
Back-patch to all supported versions.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/OSCPR01MB14966C6BE304B5BB2E58D4009F5DE2@OSCPR01MB14966.jpnprd01.prod.outlook.com
Backpatch-through: 13
bbf668d66fbf lowered the minimum value of maintenance_work_mem to
64kB. However, in parallel vacuum cases, since the initial underlying
DSA size is 256kB, it attempts to perform a cycle of index vacuuming
and table vacuuming with an empty TID store, resulting in an assertion
failure.
This commit ensures that at least one page is processed before index
vacuuming and table vacuuming begins.
Backpatch to 17, where the minimum maintenance_work_mem value was
lowered.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAD21AoCEAmbkkXSKbj4dB+5pJDRL4ZHxrCiLBgES_g_g8mVi1Q@mail.gmail.com
Backpatch-through: 17
47f99a407d introduced a parallel index-level REINDEX. The code was written
assuming that running run_reindex_command() with 'async == true' can schedule
a number of queries for a connection. That's not true, and the second query
sent using run_reindex_command() will wait for the completion of the previous
one.
This commit fixes that by putting REINDEX commands for the same table into a
single query.
Also, this commit removes the 'async' argument from run_reindex_command(),
as only its call always passes 'async == true'.
Reported-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202503071820.j25zn3lo4hvn%40alvherre.pgsql
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Backpatch-through: 17
If the given input_type yields valid results from both
get_element_type and get_array_type, initArrayResultAny believed the
former and treated the input as an array type. However this is
inconsistent with what get_promoted_array_type does, leading to
situations where the output of an ARRAY() subquery is labeled with
the wrong type: it's labeled as oidvector[] but is really a 2-D
array of OID. That at least results in strange output, and can
result in crashes if further processing such as unnest() is applied.
AFAIK this is only possible with the int2vector and oidvector
types, which are special-cased to be treated mostly as true arrays
even though they aren't quite.
Fix by switching the logic to match get_promoted_array_type by
testing get_array_type not get_element_type, and remove an Assert
thereby made pointless. (We need not introduce a symmetrical
check for get_element_type in the other if-branch, because
initArrayResultArr will check it.) This restores the behavior
that existed before bac27394a introduced initArrayResultAny:
the output really is int2vector[] or oidvector[].
Comparable confusion exists when an input of an ARRAY[] construct
is int2vector or oidvector: transformArrayExpr decides it's dealing
with a multidimensional array constructor, and we end up with
something that's a multidimensional OID array but is alleged to be
of type oidvector. I have not found a crashing case here, but it's
easy to demonstrate totally-wrong results. Adjust that code so
that what you get is an oidvector[] instead, for consistency with
ARRAY() subqueries. (This change also makes these types work like
domains-over-arrays in this context, which seems correct.)
Bug: #18840
Reported-by: yang lei <ylshiyu@126.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18840-fbc9505f066e50d6@postgresql.org
Backpatch-through: 13
In a couple of places, read_stream.c assumed that io_combine_limit would
be stable during the lifetime of a stream. That is not true in at least
one unusual case: streams held by CURSORs where you could change the GUC
between FETCH commands, with unpredictable results.
Fix, by storing stream->io_combine_limit and referring only to that
after construction. This mirrors the treatment of the other important
setting {effective,maintenance}_io_concurrency, which is stored in
stream->max_ios.
One of the cases was the queue overflow space, which was sized for
io_combine_limit and could be overrun if the GUC was increased. Since
that coding was a little hard to follow, also introduce a variable for
better readability instead of open-coding the arithmetic. Doing so
revealed an off-by-one thinko while clamping max_pinned_buffers to
INT16_MAX, though that wasn't a live bug due to the current limits on
GUC values.
Back-patch to 17.
Discussion: https://postgr.es/m/CA%2BhUKG%2B2T9p-%2BzM6Eeou-RAJjTML6eit1qn26f9twznX59qtCA%40mail.gmail.com
Commit 3c152a27b06 mistakenly repeated JSONTYPE_JSON in a condition,
omitting JSONTYPE_CAST. As a result, datum_to_jsonb_internal() failed
to reject inputs that were casts (e.g., from an enum to json as in the
example below) when used as keys in JSON constructors.
This led to a crash in cases like:
SELECT JSON_OBJECT('happy'::mood: '123'::jsonb);
where 'happy'::mood is implicitly cast to json. The missing check
meant such casted values weren’t properly rejected as invalid
(non-scalar) JSON keys.
Reported-by: Maciek Sakrejda <maciek@pganalyze.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Maciek Sakrejda <maciek@pganalyze.com>
Discussion: https://postgr.es/m/CADXhmgTJtJZK9A3Na_ry+Xrq-ghjcejBRhcRMzWZvbd__QdgJA@mail.gmail.com
Backpatch-through: 17
We did not wake up on interrupts while waiting on async events on an
async-capable append node. For example, if you tried to cancel the
query, nothing would happen until one of the async subplans becomes
readable. To fix, add WL_LATCH_SET to the WaitEventSet.
Backpatch down to v14 where async Append execution was introduced.
Discussion: https://www.postgresql.org/message-id/37a40570-f558-40d3-b5ea-5c2079b3b30b@iki.fi
makeWholeRowVar() has different rules for constructing a
whole-row Var depending on the kind of RTE it's representing.
This turns out to be problematic because the rewriter and planner
can convert view RTEs and set-returning-function RTEs into
subquery RTEs; so a whole-row Var made during planning might
look different from one made by the parser. In isolation this
doesn't cause any problem, but if a query contains Vars made
both ways for the same varno, there are cross-checks in the
executor that will complain. This manifests for UPDATE, DELETE,
and MERGE queries that use whole-row table references.
To fix, we need makeWholeRowVar() to produce the same result
from an inlined RTE as it would have for the original. For
an inlined view, we can use RangeTblEntry.relid to detect
that this had been a view RTE. For inlined SRFs, make a
data structure definition change akin to commit 47bb9db75,
and say that we won't clear RangeTblEntry.functions until
the end of planning. That allows makeWholeRowVar() to
repeat what it would have done with the unmodified RTE.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13
With improperly defined operator classes, it's possible to get a
Postgres crash because we'd try to invoke a procedure that doesn't
exist. This is because the code is being a bit too trusting that the
opclass is correctly defined. Add some ereport(ERROR)s for cases where
mandatory support procedures are not defined, transforming the crashes
into errors.
The particular case that was reported is an incomplete opclass in
PostGIS.
Backpatch all the way down to 13.
Reported-by: Tobias Wendorff <tobias.wendorff@tu-dortmund.de>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/fb6d9a35-6c8e-4869-af80-0a4944a793a4@tu-dortmund.de
The function calls GetLatestSnapshot() to acquire a fresh snapshot,
makes it active, and was meant to pass it to table_tuple_lock(), but
instead called GetLatestSnapshot() again to acquire yet another
snapshot. It was harmless because the heap AM and all other known
table AMs ignore the 'snapshot' argument anyway, but let's be tidy.
In the long run, this perhaps should be redesigned so that snapshot
was not needed in the first place. The table AM API uses TID +
snapshot as the unique identifier for the row version, which is
questionable when the row came from an index scan with a Dirty
snapshot. You might lock a different row version when you use a
different snapshot in the table_tuple_lock() call (a fresh MVCC
snapshot) than in the index scan (DirtySnapshot). However, in the heap
AM and other AMs where the TID alone identifies the row version, it
doesn't matter. So for now, just fix the obvious albeit harmless bug.
This has been wrong ever since the table AM API was introduced in
commit 5db6df0c01, so backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/83d243d6-ad8d-4307-8b51-2ee5844f6230@iki.fi
Backpatch-through: 13
The previous wording talked about a "single pass over the data",
which can be read as promising more than intended (to wit, that only
one WindowAgg plan node will be used). What we promise is only what
the SQL spec requires, namely that the data not get re-sorted between
window functions with compatible PARTITION BY/ORDER BY clauses.
Adjust the wording in hopes of making this clearer.
Reported-by: Christopher Inokuchi <cinokuchi@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CABde6B5va2wMsnM79u_x=n9KUgfKQje_pbLROEBmA9Ru5XWidw@mail.gmail.com
Backpatch-through: 13
This doesn't work because record_recv requires the typmod that
identifies the specific record type (in our session) and
array_agg_deserialize has no convenient way to get that information.
The result is an "input of anonymous composite types is not
implemented" error.
We could probably make this work if we had to, but it does not seem
worth the trouble, given that it took this long to get a field report.
Just shut off parallelization, as though record_recv didn't exist.
Oversight in commit 16fd03e95. Back-patch to v16 where that
came in.
Reported-by: Kirill Zdornyy <kirill@dineserve.com>
Diagnosed-by: Richard Guo <guofenglinux@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/atLI5Kce2ie1zcYjU0w_kjtVaxiYbYGTihrkLDmGZQnRDD4pnXukIATaABbnIj9pUnelC4ESvCXMm4HAyHg-v61XABaKpERj0A2IXzJZM7g=@dineserve.com
Backpatch-through: 16
Per POSIX, a caller of strtol() that wishes to check for errors must
set errno to 0 beforehand. Several places in spell.c neglected that,
so that they risked delivering a false overflow error in case errno
had been ERANGE already. Given the lack of field reports, this case
may be unreachable at present --- but it's surely trouble waiting to
happen, so fix it.
Author: Jacob Brazeal <jacob.brazeal@gmail.com>
Discussion: https://postgr.es/m/CA+COZaBhsq6EromFm+knMJfzK6nTpG23zJ+K2=nfUQQXcj_xcQ@mail.gmail.com
Backpatch-through: 13
pqsignal() already does a similar check, but strange Valgrind
reports have us wondering if wrapper_handler() is somehow getting
called with an invalid signal number.
Reported-by: Tomas Vondra <tomas@vondra.me>
Suggested-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/ace01111-f9ac-4f61-b1b1-8e9379415444%40vondra.me
Backpatch-through: 17
The threshold is two billion members, which was interpreted as 2GB
in the documentation. Fix to reflect that each member takes up five
bytes, which translates to about 10GB. This is not exact, because of
page boundaries. While at it, mention the maximum size 20GB.
This has been wrong since commit c552e171d16e, so backpatch to
version 14.
Author: Alex Friedman <alexf01@gmail.com>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CACbFw60UOk6fCC02KsyT3OfU9Dnuq5roYxdw2aFisiN_p1L0bg@mail.gmail.com
Backpatch-through: 14
If a GIN index search had a lot of search keys (for example,
"jsonbcol ?| array[]" with tens of thousands of array elements),
both ginFillScanKey() and startScanKey() took O(N^2) time.
Worse, those loops were uncancelable for lack of CHECK_FOR_INTERRUPTS.
The problem in ginFillScanKey() is the brute-force search key
de-duplication done in ginFillScanEntry(). The most expedient
solution seems to be to just stop trying to de-duplicate once
there are "too many" search keys. We could imagine working harder,
say by using a sort-and-unique algorithm instead of brute force
compare-all-the-keys. But it seems unlikely to be worth the trouble.
There is no correctness issue here, since the code already allowed
duplicate keys if any extra_data is present.
The problem in startScanKey() is the loop that attempts to identify
the first non-required search key. In the submitted test case, that
vainly tests all the key positions, and each iteration takes O(N)
time. One part of that is that it's reinitializing the entryRes[]
array from scratch each time, which is entirely unnecessary given
that the triConsistentFn isn't supposed to scribble on its input.
We can easily adjust the array contents incrementally instead.
The other part of it is that the triConsistentFn may itself take
O(N) time (and does in this test case). This is all extremely
brute force: in simple cases with AND or OR semantics, we could
know without any looping whatever that all or none of the keys
are required. But GIN opclasses don't have any API for exposing
that knowledge, so at least in the short run there is little to
be done about that. Put in a CHECK_FOR_INTERRUPTS so that at
least the loop is cancelable.
These two changes together resolve the primary complaint that
the test query doesn't respond promptly to cancel interrupts.
Also, while they don't completely eliminate the O(N^2) behavior,
they do provide quite a nice speedup for mid-sized examples.
Bug: #18831
Reported-by: Niek <niek.brasa@hitachienergy.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18831-e845ac44ebc5dd36@postgresql.org
Backpatch-through: 13
Upgrade to the current stable version. To avoid needing commits like this in
the future, the CI image name now doesn't contain the OS version number
anymore.
Backpatch to all versions with CI support, we don't want to generate CI images
for multiple FreeBSD versions.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ3_P4JJ6tWZafjf-_XbHgG6DQGXhH-y6Yp78_bwBJjcww@mail.gmail.com
This bogus error message was introduced in 2013 by commit f177cbfe676d,
because of misunderstanding the processCASbits() API; at the time, no
test cases were added that would be affected by this change. Only in
ca87c415e2fc was one added (along with a couple of typos), with an XXX
note that the error message was bogus. Fix the whole, add some test
cases.
Backpatch all the way back.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/202503041822.aobpqke3igvb@alvherre.pgsql
This updates the paragraph on backwards compatitibility for server
features to include --incremental which only works on servers with
v17 or newer. Backpatch down to v17 where incremental backup was
added.
Author: David G. Johnston <David.G.Johnston@Gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAKFQuwZYfZyeTkS3g2Ovw84TsxHa796xnf-u5kfgn_auyxZk0Q@mail.gmail.com
Backpatch-through: 17
In commit b262ad440, we introduced an optimization that reduces an IS
NOT NULL qual on a column defined as NOT NULL to constant true, and an
IS NULL qual on a NOT NULL column to constant false, provided we can
prove that the input expression of the NullTest is not nullable by any
outer join. This deduction happens after we have generated multiple
clones of the same qual condition to cope with commuted-left-join
cases.
However, performing the NullTest deduction for clone clauses can be
unsafe, because we don't have a reliable way to determine if the input
expression of a NullTest is non-nullable: nullingrel bits in clone
clauses may not reflect reality, so we dare not draw conclusions from
clones about whether Vars are guaranteed not-null.
To fix, we check whether the given RestrictInfo is a clone clause in
restriction_is_always_true and restriction_is_always_false, and avoid
performing any reduction if it is.
There are several ensuing plan changes in predicate.out, and we have
to modify the tests to ensure that they continue to test what they are
intended to. Additionally, this fix causes the test case added in
f00ab1fd1 to no longer trigger the bug that commit fixed, so we also
remove that test case.
Back-patch to v17 where this bug crept in.
Reported-by: Ronald Cruz <cruz@rentec.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/f5320d3d-77af-4ce8-b9c3-4715ff33f213@rentec.com
Backpatch-through: 17
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
We had managed not to notice this simple oversight because none
of our calls exercised the case --- until commit 8f427187d.
That led to pg_dump crashing on any platform that uses this code
(currently Cygwin and Mingw).
Even though there's no immediate bug in the back branches, backpatch,
because a non-POSIX-compliant strtof() substitute is trouble waiting
to happen for extensions or future back-patches.
Diagnosed-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/339b3902-4e98-4e31-a744-94e43b7b9292@gmail.com
Backpatch-through: 13
The function in charge of freeing the memory from a result created by
PQescapeIdentifier() has to be PQfreemem(), to ensure that both
allocation and free come from libpq.
One spot in pg_upgrade was not respecting that for pg_database's
datlocale (daticulocale in v16) when the collation provider is libc (aka
datlocale/daticulocale is NULL) with an allocation done using
pg_strdup() and a free with PQfreemem(). The code is changed to always
use PQescapeLiteral() when processing the input.
Oversight in 9637badd9f92. This commit is similar to 48e4ae9a0707 and
5b94e2753439.
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/Z601RQxTmIUohdkV@paquier.xyz
Backpatch-through: 16
This commit documents that the failover option is not copied when using
the pg_copy_logical_replication_slot function.
In passing, we modify the comments in the function clarifying the reason
for this behavior.
Reported-by: <duffieldzane@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/173976850802.682632.11315364077431550250@wrigleys.postgresql.org
When a standby replays an XLOG_PARAMETER_CHANGE record that lowers
wal_level below logical, we invalidate all logical slots in hot
standby mode. However, if this record was replayed while not in hot
standby mode, logical slots could remain valid even after promotion,
potentially causing an assertion failure during WAL record decoding.
To fix this issue, this commit adds a check for hot_standby status
when restoring a logical replication slot on standbys. This check
ensures that logical slots are invalidated when they become
incompatible due to insufficient wal_level during recovery.
Backpatch to v16 where logical decoding on standby was introduced.
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CAD21AoABoFwGY_Rh2aeE6tEq3HkJxf0c6UeOXn4VV9v6BAQPSw%40mail.gmail.com
Backpatch-through: 16
Due to misunderstanding on my part, commit 235328ee4 did not go far
enough to silence older versions of Valgrind. For those, it was the bit
scan that was problematic, not the subsequent bit-masking operation. To
fix, use the unaligned path for the trailing bytes. Since we don't have
a bit scan here anymore, also remove some comments and endian-specific
coding around that.
Reported-by: Anton A. Melnikov <a.melnikov@postgrespro.ru>
Discussion: https://postgr.es/m/f3aa2d45-3b28-41c5-9499-a1bc30e0f8ec@postgrespro.ru
Backpatch-through: 17
There is a race condition between "GRANT role" and "DROP ROLE",
which allows GRANT to install pg_auth_members entries that refer to
dropped roles. (Commit 6566133c5 prevented that for the grantor
field, but not for the granted or grantee roles.) We'll soon fix
that, at least in HEAD, but pg_dumpall needs to cope with the
situation in case of pre-existing inconsistency. As pg_dumpall
stands, it will emit invalid commands like 'GRANT foo TO ""',
which causes pg_upgrade to fail. Fix it to emit warnings and skip
those GRANTs, instead.
There was some discussion of removing the problem by changing
dumpRoleMembership's query to use JOIN not LEFT JOIN, but that
would result in silently ignoring such entries. It seems better
to produce a warning.
Pre-v16 branches already coped with dangling grantor OIDs by simply
omitting the GRANTED BY clause. I left that behavior as-is, although
it's somewhat inconsistent with the behavior of later branches.
Reported-by: Virender Singla <virender.cse@gmail.com>
Discussion: https://postgr.es/m/CAM6Zo8woa62ZFHtMKox6a4jb8qQ=w87R2L0K8347iE-juQL2EA@mail.gmail.com
Backpatch-through: 13
Previously the portlock logic, added in 9b4eafcaf41, didn't actually work
properly when the tests were run via meson. 9b4eafcaf41 used the
MESON_BUILD_ROOT environment variable to determine the directory for the port
lock directory, but that's never set for running the tests. That meant that
each test used its own portlock dir, unless the PG_TEST_PORT_DIR environment
variable was set.
Fix the problem by setting top_builddir for the environment. That's also used
for the autoconf/make build.
Backpatch back to 16, where meson support was added.
Reported-by: Zharkov Roman <r.zharkov@postgrespro.ru>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Backpatch-through: 16
Dumps from versions older than v16 do not know about NO INDENT in a
XMLSERIALIZE() clause. This commit adjusts AdjustUpgrade.pm so as NO
INDENT is discarded in the contents of the new dump adjusted for
comparison when the old version is v15 or older. This should be enough
to make the cross-version upgrade tests pass.
Per report from buildfarm member crake. Oversight in 984410b92326.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/88b183f1-ebf9-4f51-9144-3704380ccae7@dunslane.net
Backpatch-through: 16
Previously, a WARNING was issued at the time of defining a subscription
with origin=NONE only when the publisher subscribed to the same table from
other publishers, indicating potential data origination from different
origins. However, the publisher can subscribe to the partition ancestors
or partition children of the table from other publishers, which could also
result in mixed-origin data inclusion. So, give a WARNING in those cases
as well.
Reported-by: Sergey Tatarintsev <s.tatarintsev@postgrespro.ru>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/5eda6a9c-63cf-404d-8a49-8dcb116a29f3@postgrespro.ru
If the requested recovery timeline is not reachable, the logged
checkpoint and timeline should to be the values read from the
backup_label when it is defined. The message generated used the values
from the control file in this case, which is fine when recovering from
the control file without a backup_label, but not if there is a
backup_label.
Issue introduced in ee994272ca50. v15 has introduced xlogrecovery.c and
more simplifications in this area (4a92a1c3d1c3, a27048cbcb58), making
this change a bit simpler to think about, so backpatch only down to this
version.
Author: David Steele <david@pgbackrest.org>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/c3d617d4-1696-4aa7-8a4d-5a7d19cc5618@pgbackrest.org
Backpatch-through: 15
Since commit 29cf61ade3, table_block_relation_estimate_size() considers
fillfactor when estimating number of rows in a relation before the first
ANALYZE. The formula however did not consider tuples may be larger than
available space determined by fillfactor, ending with density 0. This
ultimately means the relation was estimated to contain a single row.
The executor however places at least one tuple per page, even with very
low fillfactor values, so the density should be at least 1. Fixed by
clamping the density estimate using clamp_row_est().
Reported by Heikki Linnakangas. Fix by me, with regression test inspired
by example provided by Heikki.
Backpatch to 17, where the issue was introduced.
Reported-by: Heikki Linnakangas
Backpatch-through: 17
Discussion: https://postgr.es/m/2bf9d973-7789-4937-a7ca-0af9fb49c71e@iki.fi
Logical replication crashes if the subscriber's partitioned table
has a BRIN index. There are two independently blamable causes,
and this patch fixes both:
1. brininsertcleanup fails if called twice for the same IndexInfo,
because it half-destroys its BrinInsertState but leaves it still
linked from ii_AmCache. brininsert would also fail in that state,
so it's pretty hard to see any advantage to this coding. Fully
remove the BrinInsertState, instead, so that a new brininsert
call would create a new cache.
2. A logical replication subscriber sometimes does ExecOpenIndices
twice on the same ResultRelInfo, followed by doing ExecCloseIndices
twice; the second call reaches the brininsertcleanup bug. Quite
aside from tickling unexpected cases in aminsertcleanup methods,
this seems very wasteful, because the IndexInfos built in the
first ExecOpenIndices call are just lost during the second call,
and have to be rebuilt at possibly-nontrivial cost. We should
establish a coding rule that you don't do that.
The problematic coding is that when the target table is partitioned,
apply_handle_tuple_routing calls ExecFindPartition which does
ExecOpenIndices (and expects that ExecCleanupTupleRouting will
close the indexes again). Using the ResultRelInfo made by
ExecFindPartition, it calls apply_handle_delete_internal or
apply_handle_insert_internal, both of which think they need to do
ExecOpenIndices/ExecCloseIndices for themselves. They do in the main
non-partitioned code paths, but not here. The simplest fix is to pull
their ExecOpenIndices/ExecCloseIndices calls out and put them in the
call sites for the non-partitioned cases. (We could have refactored
apply_handle_update_internal similarly, but I did not do so today
because there's no bug there: the partitioned code path doesn't
call it.)
Also, remove the always-duplicative open/close calls within
apply_handle_tuple_routing itself.
Since brininsertcleanup and indeed the whole aminsertcleanup mechanism
are new in v17, there's no observable bug in older branches. A case
could be made for trying to avoid these duplicative open/close calls
in the older branches, but for now it seems not worth the trouble and
risk of new bugs.
Bug: #18815
Reported-by: Sergey Belyashov <sergey.belyashov@gmail.com>
Discussion: https://postgr.es/m/18815-2a0407cc7f40b327@postgresql.org
Backpatch-through: 17
This addresses various corner cases in BackgroundPsql:
- On windows stdout and stderr may arrive out of order, leading to errors not
being reported, or attributed to the wrong statement.
To fix, emit the "query-separation banner" on both stdout and stderr and
wait for both.
- Very occasionally the "query-separation banner" would not get removed, because
we waited until the banner arrived, but then replaced the banner plus
newline.
To fix, wait for banner and newline.
- For interactive psql replacing $banner\n is not sufficient, interactive psql
outputs \r\n.
- For interactive psql, where commands are echoed to stdout, the \echo
command, rather than its output, would be matched.
This would sometimes lead to output from the prior query, or wait_connect(),
being returned in the next command.
This also affected wait_connect(), leading to sometimes sending queries to
psql before the connection actually was established.
While debugging these issues I also found that it's hard to know whether a
query separation banner was attributed to the right query. Make that easier by
counting the queries each BackgroundPsql instance has emitted and include the
number in the banner.
Also emit psql stdout/stderr in query() and wait_connect() as Test::More
notes, without that it's rather hard to debug some issues in CI and buildfarm.
As this can cause issues not just to-be-added tests, but also existing ones,
backpatch the fix to all supported versions.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/wmovm6xcbwh7twdtymxuboaoarbvwj2haasd3sikzlb3dkgz76@n45rzycluzft
Backpatch-through: 13
This is a backport of ba08edb0654. Originally it was only applied to master,
but I (Andres) am planning to fix a few bugs in BackgroundPsql, which would be
somewhat harder with the behavioural differences across branches. It's also
generally good for test infrastructure to behave similarly across branches, to
avoid pain during backpatching.
Discussion: https://postgr.es/m/ilcctzb5ju2gulvnadjmhgatnkxsdpac652byb2u3d3wqziyvx@fbuqcglker46
Michael's original commit message:
This commit extends the constructor routine of BackgroundPsql.pm with a
new "wait" parameter. If set to 0, the routine returns without waiting
for psql to start, ready to consume input.
background_psql() in Cluster.pm gains the same "wait" parameter. The
default behavior is still to wait for psql to start. It becomes now
possible to not wait, giving to TAP scripts the possibility to perform
actions between a BackgroundPsql startup and its wait_connect() call.
Author: Jacob Champion
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
This is a backport of 70291a3c66e. Originally it was only applied to master,
but I (Andres) am planning to fix a few bugs in BackgroundPsql that are harder
to fix in the backbranches with the old behavior. It's also generally good for
test infrastructure to behave similarly across branches, to avoid pain during
backpatching. 70291a3c66e changes the behavior in some cases, but after
discussing it, we are ok with that, it seems unlikely that there are
out-of-core tests relying on the prior behavior.
Discussion: https://postgr.es/m/ilcctzb5ju2gulvnadjmhgatnkxsdpac652byb2u3d3wqziyvx@fbuqcglker46
Michael's original commit message:
A newline is not added at the end of an empty query result, causing the
banner of the hardcoded \echo to not be discarded. This would reflect
on scripts that expect an empty result by showing the "QUERY_SEPARATOR"
in the output returned back to the caller, which was confusing.
This commit changes BackgroundPsql::query() so as empty results are able
to work correctly, making the first newline before the banner optional,
bringing more flexibility.
Note that this change affects 037_invalid_database.pl, where three
queries generated an empty result, with the script relying on the data
from the hardcoded banner to exist in the expected output. These
queries are changed to use query_safe(), leading to a simpler script.
The author has also proposed a test in a different patch where empty
results would exist when using BackgroundPsql.
Author: Jacob Champion
Reviewed-by: Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/CAOYmi+=60deN20WDyCoHCiecgivJxr=98s7s7-C8SkXwrCfHXg@mail.gmail.com
Absorb upstream bug fix (their commit
e322673a841d9abd69994ae8cd20e191090b6ef4), which prevents a null
pointer dereference crash if SN_create_env() gets a malloc failure
at just the wrong point.
Thanks to Maksim Korotkov for discovering the null-pointer
bug and submitting the fix to upstream snowball.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Author: Maksim Korotkov <m.korotkov@postgrespro.ru>
Discussion: https://postgr.es/m/1d1a46-67ab1000-21-80c451@83151435
Backpatch-through: 13
When considering a local buffer, the GetBufferDescriptor() call in
BufferGetLSNAtomic() would be retrieving a shared buffer with a bad
buffer ID. Since the code checks whether the buffer is shared before
using the retrieved BufferDesc, this issue did not lead to any
malfunction. Nonetheless this seems like trouble waiting to happen,
so fix it by ensuring that GetBufferDescriptor() is only called when
we know the buffer is shared.
Author: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAHewXNku-o46-9cmUgyv6LkSZ25doDrWq32p=oz9kfD8ovVJMg@mail.gmail.com
Backpatch-through: 13
In try_partitionwise_join, we try to break down the join between two
partitioned relations into joins between matching partitions. To
achieve this, we iterate through each pair of partitions from the two
joining relations and create child join relations for them. To reduce
memory accumulation during each iteration, one step we take is freeing
the SpecialJoinInfos created for the child joins.
A child join's SpecialJoinInfo is a copy of the parent join's
SpecialJoinInfo, with some members being translated copies of their
counterparts in the parent. However, when freeing the bitmapset
members in a child join's SpecialJoinInfo, we failed to check whether
they were translated copies. As a result, we inadvertently freed the
members that were still in use by the parent SpecialJoinInfo, leading
to crashes when those freed members were accessed.
To fix, check if each member of the child join's SpecialJoinInfo is a
translated copy and free it only if that's the case. This requires
passing the parent join's SpecialJoinInfo as a parameter to
free_child_join_sjinfo.
Back-patch to v17 where this bug crept in.
Bug: #18806
Reported-by: 孟令彬 <m_lingbin@126.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://postgr.es/m/18806-d70b0c9fdf63dcbf@postgresql.org
Backpatch-through: 17
