Summary:
This introduces a new frame type for acks (ACK_EXTENDED) that can carry optional fields depending on the features supported by the peer. The currently supported features set will include ECN count fields, and Receive Timstamp fields. This enables a quic connection to report both ECN counts and receive timestamps, which is not possible otherwise because they use different frame types.
Support for the extended ack as well as the set of features that can be included in it is negotiated through a new transport parameter (extended_ack_supported = 0xff0a004). Its value indicates which features are supported by the local transport. The value is an integer which is evaluated against the following bitmasks:
```
ECN_COUNTS = 0x01,
RECEIVE_TIMESTAMPS = 0x02,
```
This diff introduces the transport parameter and negotiates the supported features between the peers of the connection. The parameter is cached in the psk cache so the client can remember the server config. It is also encoded inside the 0-rtt ticket so the server can reject it if its local config has changed.
The following diffs add reading and writing the frame itself.
The ACK_EXTENDED frame itself will have the following format
```
ACK_EXTENDED Frame {
Type (i) = 0xB1
// Fields of the existing ACK (type=0x02) frame:
Largest Acknowledged (i),
ACK Delay (i),
ACK Range Count (i),
First ACK Range (i),
ACK Range (..) ...,
Extended Ack Features (i),
// Optional ECN counts (if bit 0 is set in Features)
[ECN Counts (..)],
// Optional Receive Timestamps (if bit 1 is set in Features)
[Receive Timestamps (..)]
}
// Fields from the existing ACK_ECN frame
ECN Counts {
ECT0 Count (i),
ECT1 Count (i),
ECN-CE Count (i),
}
// Fields from the existing ACK_RECEIVE_TIMESTAMPS frame
Receive Timestamps {
Timestamp Range Count (i),
Timestamp Ranges (..) ...,
}
Timestamp Range {
Gap (i),
Timestamp Delta Count (i),
Timestamp Delta (i) ...,
}
```
Reviewed By: sharmafb
Differential Revision: D68931151
fbshipit-source-id: 44c8c83d2f434abca97c4e85f0fa7502736cddc1
Summary: This diff adds the reliable_stream_reset transport parameter to mvfst.
Reviewed By: hanidamlaj
Differential Revision: D65383676
fbshipit-source-id: cb2f6a1a90004ea489447b67ed3cfc12ca90b804
Summary:
When the client doesn't send the active_connection_id_limit transport parameter, the server was wrongly defaulting to 5 instead of 2.
(https://datatracker.ietf.org/doc/html/rfc9000#section-18.2-6.2.1)
This was uncovered by https://github.com/curl/curl/issues/14043.
In that case, ngtcp2 does not send the transport parameter when its value is set to 2.
Reviewed By: hanidamlaj, meleshuk
Differential Revision: D59165736
fbshipit-source-id: e44507550b2d0eb4c97f1f7f9879bfdca4746526
Summary: We have a lot of optionals that are either integral values or std::chrono::microseconds. These end up wasting memory, where we can instead store sentinel values to encode whether the value is there or not. This reduces the effective range of the type by one value, but that is an acceptable tradeoff.
Reviewed By: kvtsoy
Differential Revision: D57684368
fbshipit-source-id: b406b86011f9b8169b6e5e925265f4829928cc63
Summary:
The idea here is to make it so we can swap out the type we are using for optionality. In the near term we are going to try swapping towards one that more aggressively tries to save size.
For now there is no functional change and this is just a big aliasing diff.
Reviewed By: sharmafb
Differential Revision: D57633896
fbshipit-source-id: 6eae5953d47395b390016e59cf9d639f3b6c8cfe
Summary:
- Remove setCustomTransportParameter, which (based on the quic v19 rfc), verifies whether a parameter is within the private range [0xff00, 0xffff]
> Values with the first byte in the range 0x00 to 0xfe (in hexadecimal) are assigned via the Specification Required policy [RFC8126].
- Consolidating adding MaxStreamGroups transport parameter into all other transport parameters extension.
More specifically, `QuicClientTransport::maybeEnableStreamGroups()` logic is now moved into `QuicClientTransport::setSupportedExtensionTransportParameters()`
Reviewed By: mjoras
Differential Revision: D50461610
fbshipit-source-id: 802b546c8364586cdcf36a230b156ca140c57ce4
Summary: also add a counter to monitor the actual number of connid encoding retries
Reviewed By: mjoras
Differential Revision: D46227574
fbshipit-source-id: c6c063ee45c7e8a9bd3af994f67755336720a740
Summary: When the server transport settings has a minAckDelay set, send the minAckDelay parameter to the client to allow the client to send ACK_FREQUENCY frames.
Reviewed By: mjoras
Differential Revision: D44765256
fbshipit-source-id: 05c3c2da8e8a93dddb12260e13f218d560a410d6
Summary: Decide if knob frames are supported based upon a transport parameter instead of relying on the QUIC version. This is a cleaner approach, at the cost of an additional transport parameter.
Reviewed By: mjoras
Differential Revision: D42465442
fbshipit-source-id: bfd1d177bdbe198e5eb47e63113410b5738dcede
Summary: This is a cosmetic change to make the naming consistent for all the advertised* variables in the transport settings.
Reviewed By: sharmafb
Differential Revision: D42465443
fbshipit-source-id: d570cbb1a2ca017105ac335b8efc404cb73f3c57
Summary: Use TransportParameterId enum as the source of truth for all the parameter ids. This basically moved the stream groups enabled parameter to the enum.
Reviewed By: kvtsoy
Differential Revision: D42465425
fbshipit-source-id: 94f9968326ac61f92587ef380a7288dd8ab38eef
Summary:
Pass max stream group parameter on handshake
The parameter conveys max number of stream groups a peer wishes to support. Note that the number/param is exchanged during handshake and currently there is now way to bump it later in connection. We can add something like MAX_STREAM_GROUP frame later.
Reviewed By: mjoras
Differential Revision: D36415454
fbshipit-source-id: 9d1c8fca7efa4adfb67fdeef859c47a3f50a67ef
Summary:
make getDatagramSizeLimit return the maximum datagram payload size that the
peer can accept.
This is currently the most conservative length, considering the maximum length
of a QUIC short header packet and a datagram frame header
Reviewed By: mjoras
Differential Revision: D28784866
fbshipit-source-id: cce8944a77f6f7b2d3535758c3c29ad88382710f
Summary:
This should be a noop in our current set up. I added some comments to clarify
the logic. Put it in another way,
- `udpSendPacketLen = f(max_packet_size, kDefaultMaxUDPPayload, canIgnorePathMTU)`
- `d6d.maxPMTU = g(max_packet_size, kDefaultMaxUDPPayload, d6dConfig.enabled)`
`f` and `g` are what the code does.
Reviewed By: mjoras
Differential Revision: D23745844
fbshipit-source-id: bc8c38a8a9086fe31e5f367d01737f360c403353
Summary:
This is following a similar pattern than what was done for the client side.
Pull Request resolved: https://github.com/facebookincubator/mvfst/pull/160
Reviewed By: yangchi
Differential Revision: D23560951
Pulled By: xttjsn
fbshipit-source-id: 351417cbfa3230112fff4c4de59b307f88389cf6
Summary:
The CID Algo can possibly generate a CID that's already in the map.
This diff adds a mechanism to reject such CID and try another one.
ServerStateMachine will loop encoding CIDs until either QuicServerWorker no
longer rejects, or encode fails
Reviewed By: udippant, vchynarov
Differential Revision: D20251043
fbshipit-source-id: a38e4e8b33007779a9710c32057d47f32f7d1774
Summary: no more surprises in upper layer
Reviewed By: mjoras
Differential Revision: D19976510
fbshipit-source-id: 3487e9aa2cb28d7bc748f13bc2bbc393216b4a8a
Summary:
My goal in this stack is to properly support the functionality of issuing new
connection ids.
There are at least three cases in which this is done (server-side):
* generate initial server connection id based on host id parameters
* provide several NewConnectionId frames to the client (for use with
migration) after handshake
* responding to RetireConnectionIdFrame and issuing more NewConnectionId frames
as needed
**Changes**:
* move connIdAlgo away from parent ConnectionStateBase to just
QuicServerConnectionState
* create virtual function in ConnectionStateBase to generate
folly::none ConnectionIdData by default,
and server subclass will generate a new server id
* add unit tests to test this behaviour.
Intended for Junqi's diff of server issuing 7 new connection ids
to be rebased on this (D15178642)
Reviewed By: yangchi
Differential Revision: D17840780
fbshipit-source-id: 1a01077742d01d058eb0a726c4c9c44e39eafb24
