Summary:
Adds a transport callback for ping received.
Uses the callback in the HTTP3 session to reset the timeout
Reviewed By: mjoras
Differential Revision: D33101180
fbshipit-source-id: d6fcecd22cbd5c311674dd9421c0c54eb04728a0
Summary: `mrtt` in `TransportInfo` currently defaults to max val if it has not been measured yet (start of connection, end of connection that never had any ACKs, etc.). Downstream consumers may not realize this, which leads to a mess. Changes it into an optional.
Reviewed By: mjoras
Differential Revision: D28383235
fbshipit-source-id: 0f103dd880e96ba60b08e0834c4ecbab81dc4221
Summary:
Providers observers with insight into ACKs received. Works for both client and server transport.
Attempts to prevent wasted memory by removing any allocated memory for ACK events if no packets in flight. In tandem, reduces allocs by _not_ removing allocated memory when packets are in flight (as this means more ACK events will occur soon...).
Reviewed By: jbeshay
Differential Revision: D31221280
fbshipit-source-id: 64b73aa74c757ebbfc27bb9c2a047d08dc7a77ca
Summary:
Currently the `packetsWritten` observer event is only triggered when ACK-eliciting packets are written to the network. This change makes it so that the event is triggered even when non ACK-eliciting packets are written. In addition, this change increases the information provided in the observer event to reduce the processing that must be performed by observers.
More specifically, this diff makes the following changes:
- It creates two new structs — `WriteEvent` and `PacketsWrittenEvent` — and makes `PacketsWrittenEvent` and `AppLimitedEvent` inherit from `WriteEvent`, which contains the base set of fields that appear in both derived events. The base set of fields includes `writeCount` and the reference to the list of `OutstandingPackets`.
- A `PacketsWrittenEvent` is generated after each write loop during which packets are written.
- The `PacketsWrittenEvent` records the total number of packets written (the sum of ACK-eliciting and non ACK-eliciting packets written) and the total number of ACK-eliciting packets written during the last loop. By exposing this information, observers can determine whether there is value in inspecting the list of `OutstandingPackets` before doing so.
- In the future, I'll extend this event to also report the number of stream bytes written.
- It adopts a new builder pattern for observer events to make it easier to create instances of these structures:
- We use this approach instead of aggregate initialization (specifically designated initializers via aggregate initialization), because designated initializers (C++20 feature, although supported by some compilers long before) is not yet supported on all platforms for which we need this code to compile.
- I intend to change the other observer events to use this pattern as the number of arguments in some of their constructors makes them increasingly difficult to deal with.
Reviewed By: mjoras
Differential Revision: D31216724
fbshipit-source-id: 42ceb922d46ab0e0dc356f8726c2d0467a219587
Summary: Provide observers with visibility into stream events triggered by local and peer (e.g., new stream opened locally or by peer).
Reviewed By: mjoras
Differential Revision: D31886978
fbshipit-source-id: 7556fef0f336bd0f190b4474f1a7b0120aae6ef1
Summary: As titled. We currently allow `QuicSocket::Observer::close` to be called multiple times. Only call it once.
Reviewed By: lnicco
Differential Revision: D31886995
fbshipit-source-id: 61d959e8575b08c34ef896b87da0cf8ada482144
Summary: Fix wrong order of fields in a VLOG message.
Reviewed By: lnicco
Differential Revision: D32106255
fbshipit-source-id: 50367a5000cb2033ecafaa6ef389971bc88a9a60
Summary:
The StreamManager monitors can now have a reference to a new observer interface QuicStreamPrioritiesObserver. If the reference is set, the observer is notified whenever streams are created, removed, or change priorities
QuicTransportBase implements this observer interface. It uses the event notifications to control a connection's background mode based upon the new background mode parameters: priority level threshold, and target utilization factor. When these parameters are set, and all active streams have a priority lower than the threshold, the connection's congestion controller is set to use only the defined utilization factor of the available bandwidth.
Reviewed By: bschlinker
Differential Revision: D31562505
fbshipit-source-id: 9c74fa834301f745d97e851741b911795f756023
Summary: Add global counters for QUIC stream reset and connection close
Reviewed By: lnicco
Differential Revision: D30877776
fbshipit-source-id: 4ee7c3f7c3c1cf190f464e74d616e0b5f1539d3a
Summary:
This diff introduces split callbacks to QUIC.
Old: callback:
* `ConnectionCallback`
Two new callbacks:
* `ConnectionSetupCallback`
* `ConnectionStreamsCallback`
For now the idea is that both old and new callbacks will live side by side and mvfst will decide which callbacks scheme to use via the `useSplitConnectionCallbacks` flag supplied on both QUIC client and server creation.
Reviewed By: mjoras
Differential Revision: D30407129
fbshipit-source-id: 7b726c2652ebe00b47f44bf291cffb9d9f6c884b
Summary: Do not call onAppRateLimited() before connection is ready
Reviewed By: bschlinker
Differential Revision: D30563194
fbshipit-source-id: dd8c2da656041f9219a645935b6c4c3c85b27816
Summary:
This is another diff preparing mvfst for the new split callbacks.
This change introduces a callback dispatcher. Right now, it simply calls the existing monolithic callback everywhere. In future diffs, this dispatcher will be using the `useSplitCallbacks` flag to decide which callback object to call.
Reviewed By: mjoras
Differential Revision: D30404458
fbshipit-source-id: 5bb919185b845acc3e8ce7c596c0769b541ff69d
Summary:
For the split QUIC callbacks, onConnectionError() will be present in both connection setup and normal connection callbacks.
This diff has no functional changes rather just separates the code that will change (in diffs higher up the stack) into a few functions for easiness.
Reviewed By: mjoras, lnicco
Differential Revision: D30400469
fbshipit-source-id: df259f201b74c51704e4284cbf94ad485f80a1ab
Summary:
This change just adds a (currently no-op) flag that will be used in diffs up the stack.
The idea here is that I'll add split QUIC connection callback interfaces that will live side by side with existing single monolithic callback for now. We will experiment with split callbacks on small scale to see that there is no regressions and then will phase out the old callback gradually.
This flag is to control which callback(s) to use.
Reviewed By: mjoras
Differential Revision: D30399667
fbshipit-source-id: 8fc4e4a005e93cf6d48a987f49edee33b90dbbf1
Summary: It's useful at the end of a connection to know if we tried DSR.
Reviewed By: jbeshay
Differential Revision: D30545282
fbshipit-source-id: bbb2f3408f7a2d5666676c9e2583bf8fd9f18911
Summary: Expose usedZeroRtt to transport info
Reviewed By: mjoras
Differential Revision: D29863937
fbshipit-source-id: 9b42e654fda89f5a383023f0c4187cd1457adfea
Summary:
These are either no longer relevant, are unlikely to be done, or are spculative enough that they don't deserve code space.
Hope here is to make our search for TODOs higher signal.
Reviewed By: lnicco
Differential Revision: D29769792
fbshipit-source-id: 7cfa62cdc15e72d8b7b0cd5dbb5913ea3ca3dc5a
Summary:
For each `QuicServerTransport` created by `QuicServerWorker`, we are able to set the `cmsg`s to be sent whenever there's a write.
With this we can set things like TOS/SO_MARK per connection
Reviewed By: bschlinker
Differential Revision: D29313608
fbshipit-source-id: d60c97f65681086ae1079b6b95beade95158ec59
Summary: This probably never made much sense as a policy. The application can reasonably expect to be able to set a read callback after the stream first becomes readable.
Reviewed By: afrind
Differential Revision: D29563483
fbshipit-source-id: 215a6aed130108248a0b4cbc36c02c8da70bf721
Summary:
Add a new QuicSocket API that sets the maximum pacing rate in Bytes per second to be used if pacing is enabled. This setting is passed down to the Pacer which enforces it.
The change also includes:
- Refactoring the setPacingRate function of the Pacer to make it more consistent with the other refreshPacingRate function.
- A new flag for testing the MAX_PACING_RATE using tperf.
Reviewed By: mjoras
Differential Revision: D29276789
fbshipit-source-id: 818d86707084b2697f7417b4a47e62cbbce65c73
Summary: invoke updateWriteLooper to make sure a datagram can be sent when it's the only thing to send
Reviewed By: mjoras
Differential Revision: D29416414
fbshipit-source-id: 77cbfc655415b589839bc8e642720498b45ceb85
Summary: Remove a check that only allowed getting and setting the receive window on writable streams. This had prevented a receiver from getting/setting the receive window of a unidirectional stream initiated by the peer.
Reviewed By: mjoras
Differential Revision: D29366097
fbshipit-source-id: 3bc5cba826663b3499c19fe26bdd9a070682e533
Summary:
make getDatagramSizeLimit return the maximum datagram payload size that the
peer can accept.
This is currently the most conservative length, considering the maximum length
of a QUIC short header packet and a datagram frame header
Reviewed By: mjoras
Differential Revision: D28784866
fbshipit-source-id: cce8944a77f6f7b2d3535758c3c29ad88382710f
Summary: DeliveryCallback is a ByteEventCallback, so callers shouldn't need to change.
Reviewed By: bschlinker, mjoras
Differential Revision: D28562237
fbshipit-source-id: d7d41bbc3cbc708f7ecda5086fcba46b6a7847b0
Summary: When multiple observers attached and one is removed, removal code can end up calling `observerDetach` on the wrong observer. Simplified and fixed removal logic and added new tests.
Reviewed By: yangchi
Differential Revision: D27033221
fbshipit-source-id: d200fd2243a678890758b2652b61d16887f073dd
Summary:
Track the number of stream bytes written to the wire and expose in `quic::TransportInfo`.
Implemented as two counters:
- `totalStreamBytesSent` is a count of all stream bytes written to the wire; the sum of the lengths of stream frames in all packets sent
- `totalNewStreamBytesSent` is a count of all *new* stream bytes written to the wire -- a stream byte is new if it has not been transmitted before; the sum of the lengths of stream frames that have never been transmitted before in all packets sent
We can derive the total number of stream bytes retransmitted as `totalStreamBytesSent - totalNewStreamBytesSent`. We may want to deprecate the existing `totalBytesRetransmitted` counter because the name of that counter does not make it clear that it is stream bytes, and because only includes some types of retransmissions.
While `totalNewStreamBytesSent` is already captured as `flowControlState.sumCurWriteOffset`, I am not reusing that counter here to avoid having a dependency on the information we track for flow control, and to allow all relevant information to be captured in `LossState` (where other relevant fields already exist).
Reviewed By: yangchi
Differential Revision: D28061085
fbshipit-source-id: 73486a4ba3fc8f12959f68702dc58e61fdc21b65
Summary:
Previously we were using a single flag appDataSentEvents to enable 3 callbacks
(startWritingFromAppLimited, packetsWritten and appRateLimited). This commit
creates separate flags to enable each of these callbacks, we have use-cases
where Observers might want only packetsWritten events and not the others.
Also, this commit refactors the logic to deliver these 3 callbacks to all
observers into a separate method so they can be unit tested easily.
Reviewed By: bschlinker
Differential Revision: D27925011
fbshipit-source-id: 7f7436dfc3d50c3abcb8ec121b221d20e30b0c4b
Summary: This was missed when peekError was added
Reviewed By: mjoras, lnicco
Differential Revision: D27973063
fbshipit-source-id: dbf1112a4ce6822401ba5125de853fe922acd85e
Summary:
As per design, we are not supposed to honor duplicate byte event registrations. Duplicate is defined by a registration for the same <stream ID, stream offset, callback*> tuple twice.
Currently, there is a bug where-in we can register the same byte event a second time *if* there is another byte event for a higher offset that is registered in-between, for the same stream.
Example Sequence that triggers the bug:
1. Registration for Stream ID =10, offset = 50, callback = A. This will be successful.
2. Registration for Stream ID = 10, offset = 55, callback = <doesn't matter>. This will be successful.
3. Registration for Stream ID = 10, offset = 50, callback = A. This is a duplicate of #1. This *should not* be honored, but it was being honored (this was the bug).
This commit fixes the bug, #3 will return INVALID_OPERATION.
Reviewed By: bschlinker, lnicco
Differential Revision: D27946237
fbshipit-source-id: f9751ac90159284f86a285e5e0ebb23b83041d2a
Summary:
Diff D27846813 (98b5e2aa8f) introduced a fix for a corner case in the ByteEventRegistration logic where-in it was possible to register a byte event for the same stream ID, offset and ByteEvent type as long as they were not consecutive registrations. If there was a different byte event registration for the same stream ID in-between, then duplicates were being allowed.
However, that fix causes an unexpected crash in HQSession::dropConnectionSync().
This commit reverts the fix for duplicate byte event registrations until we are able to find the root cause for the crash and come up with a better fix. Note that we are still able to catch duplicate registrations as long as they are consecutive registrations for the same <stream ID, offset, callback>. With this fix reverted, we will not be able to catch non-consecutive duplicate registrations.
Reviewed By: bschlinker
Differential Revision: D27903179
fbshipit-source-id: b4da3128d5ba14fc764e1768fd27982553968997
Summary:
This assigns a DSRPacketizationRequestSender to a QUIC stream, and let
it own it.
Reviewed By: mjoras
Differential Revision: D27668523
fbshipit-source-id: 4beba6ddf247801368c3e1c24a0a4956490d45cd
Summary:
When registerByteEvent is called for a particular stream ID and offset, it is
possible that the byte event has already occurred in the past. In this case, we
schedule a lambda to be executed in the *next* iteration of the event loop, to
deliver the byte event to the callback.
There are 2 bugs in the current implementation of runEvbAsync which executes
the scheduled lambda.
1. It is possible that multiple recipients register for the same byte event on
the same stream ID and offset. If one of the recipients is already delivered
the byte event, then there is a possibility that the lambda can redeliver the
same notification a second time, which is not desirable.
2. There is a race condition where-in between the time the lambda was scheduled to
the time the lambda was excecuted, it is possible that the byte event gets
delivered when we process callbacks on receiving network data. In this
situation, there is a bug in the lambda where-in if there is another byte event
registered for any other offset for the same stream ID (regardless of the
callback), we will falsely deliver the byte event that was requested, resulting
in double delivery of the same byte event.
This commit fixes both bugs by checking that the requested byte event still
exists in the ByteEventDetail deque (comparing the offset as well as callback),
before erasing and delivering it.
Reviewed By: bschlinker
Differential Revision: D27846813
fbshipit-source-id: 099b79af2580fba5561ec33c4be45a8cf84c39e8
Summary: The kitchen sink must grow. Nice to know when the conn ends what the version was.
Reviewed By: lnicco
Differential Revision: D27868680
fbshipit-source-id: 2770ed2c647d76affbb52597a5a2a6720eabfe66
Summary:
This diff adds error callback API during the time PeekCallback() is applied, following D9724616, D988728, D15312250, design doc https://fb.quip.com/8P9WAaF43VOn
The peekError() API implementation is added into unidirectional stream dispatcher, class HQUnidirStreamDispatcher.
Reviewed By: mjoras
Differential Revision: D27514260
fbshipit-source-id: b65cc0e46a5d520f46f9dc218c9a65be99e6df55
