EVP_DigestSign and EVP_DigestVerify are implicitly included in new (>1.1.1)
openssl versions, no need to use the old functions.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
POLY1305 is implicitly included in new (>1.1.1) openssl version, no need
to check it explicitly.
CHACHA20 is implicitly included too, but it can be turned off at config
in openssl, so we still need to check it.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
X25519 is implicitly included in new (>1.1.1) openssl version, no need
to check it explicitly.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
ED25519 is implicitly included in new (>1.1.1) openssl version, no need
to check it explicitly.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Removing support for older openssl versions than 1.1.1 makes some functions
implicitly included; we do not have to check the availability of these
functions.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
The c7s uses not longer supported openssl version which will make
the CI fail when we remove the supported of the old openssl versions.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As openssl 1.1.0, 1.0.2, 1.0.1, 1.0.0 and 0.9.8 are no longer supported
let's remove them.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As openssl 1.1.0, 1.0.2, 1.0.1, 1.0.0 and 0.9.8 are no longer supported
let's remove them.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
As openssl 1.1.0, 1.0.2, 1.0.1, 1.0.0 and 0.9.8 are no longer supported
let's remove them.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
libsofthsm detection is broken in i686 architecture. The approach is to export
the path found by cmake to `tests_config.h` and the script
setup-softhsm-tokens.sh gets that value through cli parameters.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
The error was the following
/builds/libssh/libssh-mirror/examples/sshnetcat.c:241:18: error: a function
declaration without a prototype is deprecated in all versions of C
[-Werror,-Wstrict-prototypes]
void cleanup_pcap(){
^
void
and similar
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Let's check tests in fips mode with an up to date system too as we already
found some issues running the tests there.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
uint32_t should be formated by PRI?32
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Change-Id: I811cfd764010f9e8bb599b370155ac065ee1905c
When we decide we need to rekey, we enqueue any further packets until we've sent
our SSH2_MSG_NEWKEYS message, after which we dequeue these packets and send them
to the other side. This enqueueing is done based on ssh_packet_in_rekey checking
the session flags and whether DH handshake state is marked as finished.
However, the handshake state is not reset to DH_STATE_FINISHED until the other
side has sent us their new keys. This leaves a gap between sending our new keys
and receiving the other side's new keys where we would still decide to enqueue a
packet.
These enqueued packets will not be dequeued as we've already sent our new keys.
Once we've received the other side's new keys, we'll go back to a finished
handshake and we will send out our caller's new data, skipping however much data
we've enqueued.
Fix this by changing ssh_packet_in_rekey to return false once we've sent our new
keys.
Signed-off-by: Carlos Martín Nieto <carlosmn@github.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
These warning should be logging when something fatal happens and give
information on the error to the user.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Loglevel INFO is the default openssh configuration setting which does not print
redundant information. On a system using openssh with loglevels set by the
terms of openssh will cause unwanted log lines in the output.
recategorized based on - SSH_LOG_DEBUG are informational debug logs (no error)
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Do not print out logs when no fatal error happens.
This approach is similiar to openssh, when Error/Fatal does not print
recoverable error logs.
recategorized based on - SSH_LOG_TRACE are debug logs when error happens
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
No info log will be printed out when Loglevel WARN is set, only errors
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Andreas Schneider <asn@cryptomilk.org>
Commit 8cf9c816 "Do not force GNU_SOURCE during build to fix#141" has broken support for CYGWIN.
The build hangs with this error message:
libssh-0.10.4/src/config.c: In function ‘local_parse_glob’:
libssh-0.10.4/src/config.c:252:25: error: ‘GLOB_TILDE’ undeclared (first use in this function)
252 | rt = glob(fileglob, GLOB_TILDE, NULL, &globbuf);
| ^~~~~~~~~~
I think that it would be better to re-add it, by using target_compile_definitions() rather than target_compile_options(), which is more appropriate in my opinion.
Signed-off-by: Carlo Bramini carlo_bramini@users.sourceforge.net
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
FIPS 140-3 puts big limitations on using TDEA and it is
already disabled in rhel9.
Signed-off-by: Norbert Pocs <npocs@redhat.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
This fixes patch relocation of the output of pkgconfig by adding
missing keywords like prefix, exec_prefix, libdir and includedir.
The pkgconfig output changes are like following:
* Before:
$ pkg-config -libs libssh
-lssh
* After:
$ pkg-config -libs libssh
-LF:/msys64/ucrt64/lib -lssh
See https://people.freedesktop.org/~dbn/pkg-config-guide.html for
further documentation.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
Missing escaping results in syntax errors in Zsh shell because of square
brackets getting interpreted as being a pattern for globbing.
Signed-off-by: Thomas Baag <libssh-git@spam.b2ag.de>
Reviewed-by: Jakub Jelen <jjelen@redhat.com>
