Do not compare only with the latest entry for given device id but also
all previously saved entries with the same id.
* src/df.c (struct devlist): Add next_same_dev struct member.
(filter_mount_list): Iterate over next_same_dev to find duplicates.
* tests/df/skip-duplicates.sh: Add test cases.
* NEWS: Mention the improvement.
https://redhat.atlassian.net/browse/RHEL-5649
Verified with:
make -j4 PREFERABLY_POSIX_SHELL=/bin/ksh SUBDIRS=. check
* tests/fold/fold-zero-width.sh: Don't timeout $SHELL -c ...
as the ulimit induces a failure in the subshell depending
on the order of the allocations it does. The main issue is
disparity between the probed ulimit and that needed by $SHELL -c.
Such subshells load the often very large locale archive, thus
if there are any allocations done after the now too low ulimit is set,
then the $SHELL command fails. Note we timeout fold rather than
the whole pipeline so any 124 exit status is propagated.
This avoids the following behavior:
$ strace -e silence=exit -e trace=unlink,rmdir \
mktemp -d > /dev/full
unlink("/tmp/tmp.ZBuPmS9ZGD") = -1 EISDIR (Is a directory)
rmdir("/tmp/tmp.ZBuPmS9ZGD") = 0
mktemp: write error: No space left on device
In the above invocation we know that we created a directory, so we
should not remove a regular file that must have been created by another
process:
$ strace -e silence=exit -e trace=unlink,rmdir \
./src/mktemp -d > /dev/full
rmdir("/tmp/tmp.hGbME1HmJr") = 0
mktemp: write error: No space left on device
* src/mktemp.c (main): Prefer rmdir and unlink depending on whether we
created a directory or regular file.
* bootstrap.conf (gnulib_modules): Remove the remove module.
* src/cat.c (splice_cat): Don't bother resizing input as it generally
doesn't help perf, and also save an fstat per input. Don't close the
intermediate pipe once created, unless there is an error reading from
it.
Co-authored-by: Pádraig Brady <P@draigBrady.com>
* tests/misc/responsive.sh: Test commands that should output immediately
upon receiving input, and that there is no unecessary buffering.
* cfg.mk: Avoid false failure in sc_prohibit_test_backticks.
* tests/local.mk: Reference the new test.
* tests/tty/tty-eof.pl: Remove command specific logic,
and adjust commands to support general input.
Also add cut -b, as cut_bytes has its own read loop.
* tests/date/date.pl: Set the max supported year to INT_MAX.
Most systems support INT_MAX+1900, but mktime() on OpenBSD 7.8
limits the passed tm_year to INT_MAX.
Reported by Bruno Haible.
* tests/numfmt/numfmt.pl: Move recently added test that depends
on long double support to the appropriately guarded set.
Also reduce the value to be in the definitely safe long double range.
Reported by Bruno Haible.
Seen on GCC 15.2.1 with GLIBC 2.43 on Arch
Not seen on GCC 15.2.1 on GLIBC 2.42 on Fedora
* src/cut.c (search_bytes): Cast the return from memchr()
to avoid const propagation.
(find_field_delim): Adjust the return from strstr() similarly.
https://github.com/coreutils/coreutils/issues/244
* tests/cat/splice.sh: Ensure splice is called multiple times
before we check specific invocation counts.
On Linux kernel 5.10 for example, splice from /dev/zero
returns EINVAL.
* configure.ac (GNULIB_SIGACTION_SINGLE_THREAD): Remove.
This never worked (it was a misspelling) and the properly-spelled
identifier (whose spelling has since been renamed) is useful
mostly for programs like gzip that do not need Gnulib’s ‘lock’ module.
For coreutils, which needs ‘lock’ for other reasons, it’s overkill.
maint: avoid pthread_sigmask lock overhead
This matters only for MS-Windows.
* configure.ac (GNULIB_PTHREAD_SIGMASK_SINGLE_THREAD):
Define this instead of defining GNULIB_SIGACTION_SINGLE_THREAD.
The latter was a typo, and Gnulib has evolved anyway.
* tests/ls/quoting-utf8.sh: New test verifying that
--quoting-style=locale and --quoting-style=clocale use Unicode
left/right single quotation marks in UTF-8 locales, and that
embedded apostrophes and double quotes are not escaped when the
delimiters are different characters.
Also check C locale fallback to ASCII quotes.
* tests/local.mk: Reference the new test.
https://github.com/coreutils/coreutils/pull/243
This patch set updates cut(1) to be multi-byte aware.
It also reduces interface divergence across implementations.
multi-byte awareness was added to the existing -c, n, and -d options.
Also considered for compatibility are the -w, -F, and -O options,
as these are present on at least two other common implementations.
= Interface / New functionality =
macOS, i18n, uutils, Toybox, Busybox, GNU
-c x x x x x x
-n x x x
-w x x x
-F x x x
-O x x x
-c is needed anyway as specified by all, including POSIX.
-n is needed also as specified by i18n/macOS/POSIX
-w is somewhat less important, but seeing as it's
on two other common platforms (and its functionality is
provided on two more), providing it is worthwhile for compat.
-F and -O are really just aliases to other options
so trivial to add, and probably worthwhile for compatibility.
Interface / functionality notes:
There is a slight divergence between -n implementations.
There was already a difference between FreeBSD and i18n, and
we've aligned with the more sensible FreeBSD implementation.
Note the i18n -n implementation is otherwise buggy in any case,
so I doubt this will be a practical compatibility concern.
Actually -n is specified by POSIX, and it matches FreeBSD.
Specifically our -n will not output a character unless the
byte range encompasses _the end_ of the multi-byte character.
I.e. the -b is a limit that is not passed, and thus ensures
we don't output overlapping characters for separate cut
invocations that do not have overlapping byte ranges.
-d <regex> from toybox is not implemented.
That's edge case functionality IMHO and not well suited to cut(1).
This functionality is supported by awk, and regex functionality
is best restricted to awk I think.
cut is a significant part of the i18n patch, so it will be good
to avoid that downstream divergence. Unfortunately there were
no tests with the cut i18n implementation.
Note the i18n cut implementation used fread() as so was
not reponsive to new data < BUFSIZ, whereas this implementation
uses read() and thus is responsive to data as it becomes available.
= Performance =
General performance notes:
We prefer byte searching (with -d) as that can be much faster
than character by character processing, and it's supported
on single byte and UTF-8 charsets. We also use byte searching
with -w on uni-byte locales.
This was seen to give up to 100x perf increase over the i18n patch.
Where we do use per character processing, we avoid conversion to
wide char when processing ASCII data (mcel provides this optimization).
This was seen to give a 14x performance increase over the i18n patch.
We prefer memchr() and strstr() as these are tuned for specific
platforms on glibc, even if memchr2() or memmem()
are algorithmically better.
We maintain the important memory behavior
of only buffering when necessary.
Performance testing:
There are _lots_ of combinations and optimziation opportunities.
I performance tested this patch set with the following setup:
$ yes | head -n10M > sl.in
$ yes $(yes eeeaae | head -n10K | paste -s -d,) | head -n10K > ll.in
$ yes $(yes eeeaae | head -n9 | paste -s -d,) | head -n1M > as.in
$ yes $(yes éééááé | head -n9 | paste -s -d,) | head -n1M \
> mb.in
$ for type in sl ll as mb; do
cat $type.in >/dev/null;
for imp in '' src/; do # '' maps to the system i18n ver on Fedora
echo ============ "${imp:-i18n}" $type ==============;
for d in -d, -dc -d, -dç -w -b -c; do
fields='-f1 -f10 -f100'
test "$d" = "-b" && { fields='-b1 -b10 -b100'; d=''; }
test "$d" = "-c" && { fields='-c1 -c10 -c100'; d=''; }
for f in $fields; do
for loc in C C.UTF-8; do
# SKip -b for UTF-8 as no different
test "$loc" = C.UTF-8 && echo "$f" | grep -q -- -b \
&& continue
# Skip multi-byte delimiter for C and not allowed
test "$loc" = C && test $(echo -n "$d" | wc -c) -ge 4 \
&& continue
LC_ALL=$loc ${imp}cut $f $d /dev/null 2>/dev/null &&
hyperfine -m2 -M4 \
"LC_ALL=$loc ${imp}cut $f $d $type.in >/dev/null" ||
printf 'Benchmark 1: %s\n unsupported\n\n' \
"LC_ALL=$loc ${imp}cut $f $d $type.in >/dev/null"
done;
done;
done;
done;
done
After a little post-processing of the results, we get:
-- cut-i18n
| command | sl | ll | as | mb |
| --------------- | -------- | -------- | -------- | -------- |
| C -f1 -d, | 66.3 ms | 1.605 s | 145.9 ms | 366.4 ms |
| UTF8 -f1 -d, | 65.8 ms | 1.593 s | 145.8 ms | 370.0 ms |
| C -f10 -d, | 301.4 ms | 1.590 s | 161.8 ms | 126.7 ms |
| UTF8 -f10 -d, | 303.5 ms | 1.599 s | 161.8 ms | 124.6 ms |
| C -f100 -d, | 300.6 ms | 1.596 s | 162.1 ms | 126.7 ms |
| UTF8 -f100 -d, | 301.3 ms | 1.595 s | 162.0 ms | 124.9 ms |
| C -f1 -dc | 66.6 ms | 1.845 s | 179.1 ms | 365.7 ms |
| UTF8 -f1 -dc | 73.8 ms | 1.878 s | 179.1 ms | 363.1 ms |
| C -f10 -dc | 300.7 ms | 349.8 ms | 76.0 ms | 125.3 ms |
| UTF8 -f10 -dc | 300.4 ms | 347.2 ms | 75.7 ms | 124.8 ms |
| C -f100 -dc | 300.1 ms | 348.1 ms | 76.5 ms | 125.5 ms |
| UTF8 -f100 -dc | 300.8 ms | 348.7 ms | 76.4 ms | 125.8 ms |
| UTF8 -f1 -d, | 563.5 ms | 21.775 s | 1.963 s | 1.665 s |
| UTF8 -f10 -d, | 833.6 ms | 20.504 s | 2.022 s | 1.612 s |
| UTF8 -f100 -d, | 825.2 ms | 20.448 s | 2.009 s | 1.616 s |
| UTF8 -f1 -dç | 563.7 ms | 21.827 s | 1.964 s | 2.319 s |
| UTF8 -f10 -dç | 825.3 ms | 21.713 s | 2.011 s | 2.248 s |
| UTF8 -f100 -dç | 831.6 ms | 20.505 s | 2.019 s | 2.276 s |
| C -f1 -w | - | - | - | - |
| UTF8 -f1 -w | - | - | - | - |
| C -f10 -w | - | - | - | - |
| UTF8 -f10 -w | - | - | - | - |
| C -f100 -w | - | - | - | - |
| UTF8 -f100 -w | - | - | - | - |
| C -b1 | 60.8 ms | 1.596 s | 154.8 ms | 313.7 ms |
| C -b10 | 51.6 ms | 1.594 s | 154.3 ms | 310.8 ms |
| C -b100 | 51.4 ms | 1.594 s | 153.0 ms | 312.2 ms |
| C -c1 | 60.7 ms | 1.597 s | 153.8 ms | 313.0 ms |
| UTF8 -c1 | 526.5 ms | 14.662 s | 1.362 s | 1.573 s |
| C -c10 | 51.8 ms | 1.591 s | 153.3 ms | 311.4 ms |
| UTF8 -c10 | 436.9 ms | 14.450 s | 1.336 s | 1.563 s |
| C -c100 | 51.0 ms | 1.593 s | 152.7 ms | 313.2 ms |
| UTF8 -c100 | 426.7 ms | 14.429 s | 1.344 s | 1.551 s |
-- src/cut
| command | sl | ll | as | mb |
| --------------- | -------- | -------- | -------- | -------- |
| C -f1 -d, | 4.6 ms | 108.2 ms | 45.4 ms | 24.2 ms |
| UTF8 -f1 -d, | 4.8 ms | 108.4 ms | 45.4 ms | 24.5 ms |
| C -f10 -d, | 4.5 ms | 109.3 ms | 123.7 ms | 24.3 ms |
| UTF8 -f10 -d, | 4.9 ms | 114.1 ms | 124.1 ms | 24.5 ms |
| C -f100 -d, | 4.7 ms | 119.2 ms | 124.1 ms | 24.5 ms |
| UTF8 -f100 -d, | 4.8 ms | 120.0 ms | 125.1 ms | 24.5 ms |
| C -f1 -dc | 4.4 ms | 120.5 ms | 11.9 ms | 24.1 ms |
| UTF8 -f1 -dc | 4.9 ms | 120.5 ms | 12.1 ms | 24.6 ms |
| C -f10 -dc | 4.7 ms | 125.3 ms | 11.8 ms | 24.1 ms |
| UTF8 -f10 -dc | 4.8 ms | 126.7 ms | 12.0 ms | 24.4 ms |
| C -f100 -dc | 4.6 ms | 127.0 ms | 11.9 ms | 24.3 ms |
| UTF8 -f100 -dc | 4.7 ms | 126.4 ms | 12.0 ms | 24.4 ms |
| UTF8 -f1 -d, | 6.0 ms | 169.4 ms | 15.6 ms | 67.4 ms |
| UTF8 -f10 -d, | 6.1 ms | 173.9 ms | 15.6 ms | 237.2 ms |
| UTF8 -f100 -d, | 6.1 ms | 174.0 ms | 15.6 ms | 237.8 ms |
| UTF8 -f1 -dç | 6.3 ms | 170.8 ms | 15.7 ms | 32.2 ms |
| UTF8 -f10 -dç | 6.0 ms | 172.9 ms | 15.9 ms | 32.1 ms |
| UTF8 -f100 -dç | 6.7 ms | 173.1 ms | 15.5 ms | 32.3 ms |
| C -f1 -w | 159.6 ms | 170.1 ms | 69.1 ms | 98.9 ms |
| UTF8 -f1 -w | 128.1 ms | 2.525 s | 246.5 ms | 1.086 s |
| C -f10 -w | 183.3 ms | 199.2 ms | 74.6 ms | 105.0 ms |
| UTF8 -f10 -w | 130.3 ms | 2.659 s | 276.5 ms | 1.099 s |
| C -f100 -w | 183.8 ms | 202.5 ms | 74.1 ms | 103.6 ms |
| UTF8 -f100 -w | 130.1 ms | 2.663 s | 276.6 ms | 1.097 s |
| C -b1 | 65.0 ms | 110.2 ms | 22.4 ms | 35.6 ms |
| C -b10 | 48.7 ms | 109.6 ms | 24.2 ms | 36.7 ms |
| C -b100 | 48.7 ms | 110.6 ms | 19.0 ms | 36.6 ms |
| C -c1 | 65.8 ms | 109.5 ms | 22.4 ms | 35.6 ms |
| UTF8 -c1 | 63.2 ms | 1.130 s | 116.9 ms | 610.2 ms |
| C -c10 | 48.7 ms | 109.8 ms | 24.3 ms | 36.8 ms |
| UTF8 -c10 | 39.7 ms | 1.133 s | 118.7 ms | 610.0 ms |
| C -c100 | 48.3 ms | 110.7 ms | 18.9 ms | 36.7 ms |
| UTF8 -c100 | 39.4 ms | 1.141 s | 115.0 ms | 598.8 ms |
In summary, compared to the i18n patch we're now as fast in all cases,
and much faster in most cases.
We can see the -f byte searching performing well,
being 120x faster in the no matching delimiter case,
to at least 3x faster in the matching delimiter case.
When we resort to per character processing we also compare well,
being 14x faster in the ASCII processing case
(due to mcel short-circuiting the wide char conversion).
Note the processing mb.in results above also show a 2x win
in per character processing cases, but the i18n patch would have
also picked that win up as it's achieved separately to this patch set:
https://lists.gnu.org/r/coreutils/2026-03/msg00117.html
* gl/lib/mbbuf.h: Adjust mbbuf_fill() to process full characters
in the slop at the end of a read(). Previously valid characters
in the last MCEL_LEN_MAX bytes were ignored until the next read().
* src/cut.c (cut_fields_bytesearch): Adjust to the new naming.
* NEWS: Mention the fold(1) responsiveness fix, which was
improved with the change from fread() to read(),
and completed with this patch.
$ time LC_ALL=C src/cut-before -b1 sl.in >/dev/null
real 0m0.115s
$ time LC_ALL=C src/cut-after -b1 sl.in >/dev/null
real 0m0.076s
* src/cut.c (cut_bytes): Hoist the fileno() invariant outside the loop.
Avoid memchr for very short lines.
(search_bytes): Similar to copy_bytes() and write_bytes() helpers.
Note adding code to probe 3 or 4 bytes resulted in worse register
allocation. I.e. slower operation even if the input was only 2 bytes.
With field delimiter = line delimiter we need to know
if there is any more data to be read, as field delimiter
in the last byte of the file is treated differently.
So reiterate the loop to ensure enough read()s to make
the appropriate determination.
* gl/lib/mbbuf.h (fill_buf): Switch from fread() to read()
as the former retries read() internally to fill the buffer.
* src/cut.c: Adjust accordingly, and avoid getc() interface entirely.
* bootstrap.h: Depend explicitly on fseterr. This is already depended
on transitively, so should not introduce new build portability issues.