* tests/cp/link-no-deref.sh: Use printf rather than echo, as echo
unconditionally interprets backslashes in dash. Also use %q in
printf to decouple from the shell escaping implementation.
Also refactor strace usage to its own function, and avoid
a false failure in case strace didn't intercept the chown.
* src/copy.c (copy_internal): Add a missing quoteaf call.
* tests/cp/link-no-deref.sh: Invoke getlimits_ and uses_strace_. Inject
an error using 'strace' to verify the name of the destination is quoted
in the error message.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-3M3N6L8K.
* src/factor.c (mulredc2): Add the carry to p1, which is the high word
of a two-word integer created by summing two single-word integers and is
therefore unable to overflow, instead of using a low word r0, which may
wrap around by adding the carry.
* tests/factor/mulredc2-infloop.sh: New file.
* tests/local.mk (all_tests): Add the new test.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-CFUR0JKW.
* src/tail.c (tail_forever_inotify): Fallback to polling upon overlow.
* tests/tail/inotify-overflow.sh: Add a new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-UUNT73BK.
* src/basenc.c (base32hex_decode_ctx_wrapper): Ensure we don't
accept base32 only characters for base32hex.
* tests/basenc/basenc.pl: Ensure negative base32hex tests have the
appropriate number of characters to test character validation
rather than just input size validation.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-EP1XO2G4.
* src/factor.c (strtouuint): Return LONGINT_OVERFLOW only if all of the
characters are digits; otherwise, return LONGINT_INVALID.
* tests/factor/factor.pl: Add two test cases.
* NEWS: Mention the bug fix.
Discovered by Anthropic's OSS Scanner, as bug ANT-2026-IZ8PFQ7Q.
stty currently fails like:
$ stty 9600
$ saved=$(stty -g)
$ stty 19200 "$saved" # Sets 9600 but reports failure
stty: 'standard input': unable to perform all requested operations
Whereas these work fine:
$ stty 19200 9600
$ stty "$saved" 19200
* NEWS: Mention the bug fix.
* src/speedgen (cbaud_to_speed): Determine the speed
from the control flag encoding.
* src/stty.c (recover_mode): If no separate speed specified,
update the speed from the specified control flags.
* tests/stty/stty-save-speed.sh: Add test cases.
Note this changes the output format of -g.
POSIX states that the -g format only needs to be compatible
with the stty implementation that produced it.
However we improve compatibility on Linux by only outputting
the explicit speeds when they're not encoded in the control flags.
* NEWS: Mention the change in behavior.
* src/stty.c (display_recoverable): Output the speeds if needed.
(recover_mode): Read the speeds if present.
* tests/stty/stty-save-speed.sh: Add a new test.
* tests/local.mk: Reference the new test.
Link: https://github.com/coreutils/coreutils/issues/384
* init.cfg (single_binary_build_): An abstraction to check
if the current build is a functional --enable-single-binary build.
(require_safe_builddir_): Also add an abstraction to check for
whitespace in $abs_top_builddir.
* tests/misc/proc-self-comm.sh: Just warn about a non functional
dispatch binary.
* tests/install/basic-1.sh: Use the abstraction which is more accurate
when a stub src/coreutils binary is present.
Also fix up an incorrect skip_ edge case.
* tests/misc/responsive.sh: Use require_safe_builddir_.
* tests/misc/stdbuf.sh: Likewise.
* tests/misc/exec-bad-unicode.sh: Clarify a comment.
* tests/misc/proc-self-comm.sh: Quote variables that contain the current
working directory, which may contain spaces. Don't set symlink_cat to a
multi-argument command invocation. Set the path before executing it.
Reported by Bruno Haible.
This preserves any program name transformations, e.g., when
--program-prefix=g is used as a configuration option, unlike commit
ef874ed6c (all: set /proc/self/comm to the program name in the single
binary, 2026-10-17).
* src/coreutils.c (launch_program): Use the last component of argv[0]
when setting the comm value using prctl (PR_SET_NAME, ...).
* tests/misc/proc-self-comm.sh: When using
--enable-single-binary=shebangs, test that the comm value preserves any
program name transformations, e.g., --program-prefix=g.
* NEWS: Adjust the NEWS entry to refer to last component of argv[0]
instead of the program name.
Suggested by Pádraig Brady.
This tests the fix introduced by commit ee9b9aff8 (all: set
/proc/self/comm to the program name in the single binary, 2026-10-17).
* tests/misc/proc-self-comm.sh: New file.
* tests/local.mk (all_tests): Add the new test.
* tests/misc/exec-bad-unicode.sh: Avoid stdbuf running non instrumented
binaries, because the LD_PRELOADED libstdbuf.so may then get link errors
due to it not linking with the sanitizer runtime, and neither does
a non instrumented binary. So instead of running $SHELL, avoid the
issue by running our echo binary directly, which should provide
the sanitizer lib. Using our built binary in the shebang also
implicitly checks for problematic whitespace in the path.
Replace the O(N) scan of watched names on each directory inotify event
with a Hash_table keyed by (parent_wd, basename), addressing the
long-standing FIXME in tail_forever_inotify.
Keep ownership consistent with wd_to_name: parent_by_name is created
only for Follow_name and returned to the caller, so fallback paths can
return without local hash cleanup.
Hash basenames with hash_string() and mix in parent_wd, matching the
existing gnulib helper rather than a hand-rolled string hash.
Matching cost for N directory events that each compare against N names
(illustrative host timings of the scan vs hash lookup alone):
N=1000: ~0.018s -> ~0.000s
N=5000: ~0.39s -> ~0.000s
N=10000: ~1.5s -> ~0.000s
End-to-end recreate storms remain largely file-system bound on this
host; the hash removes the quadratic name-matching CPU from that path.
* src/tail.c (parent_name_hasher, parent_name_comparator): New.
(tail_forever_inotify): Build and use parent_by_name; return it to the
caller.
(main): Free parent_ht when non-NULL.
* tests/tail/inotify-parent-hash.sh: Require notification mode; cover
multiple names in one directory and the same basename in two
directories.
* tests/local.mk: Reference the new test.
* NEWS: Mention the improvement.
On systems where the security context reports as unsupported,
and we encountered a file without ACLs, no further lookups
would be performed. Introduced in commit v9.5-156-gb857d66b5.
This fix is along similar lines as commit v9.6-40-gcb2abbac7.
* src/ls.c (file_has_aclinfo_cache): Don't mark file system as
unsupported if there might be ACLs or capabilities present.
* tests/ls/acl-cache.sh: Add a new test.
* tests/local.mk: Reference the new test.
* tests/ls/acl.sh: Add a check.
* NEWS: Mention the bug fix.
* tests/misc/tty-quoting.sh: Since commit v9.12-10-g782a1e5bc,
env(1) calls isatty() and thus induces another ioctl()
which causes the test to skip. The env(1) is redundant anyway
as strace will avoid shell builtins, so just remove the redundant
env calls.
* tests/ls/getxattr-speedup.sh: Add listxattr calls into the list
to trace/fail so that the test also works on non-SELinux builds.
Also adjust the test to compare call counts with varying number
of files, rather than checking a particular call count limit,
as that is a bit coupled with the implementation.
Link: https://github.com/coreutils/coreutils/pull/368
`pr -e=-1` gives a confusing error relating to just the "-1" portion,
when in fact "=" might have been inadvertently treated as a param.
Also one gets confusing errors in the case of mishandled
multi-byte characters, if the whole argument is not diagnosed.
* src/pr.c (getoptarg): Output the complete passed argument,
to avoid the confusion with "=" being used with a short option.
* tests/pr/options.sh: Adjust accordingly.
Link: https://github.com/coreutils/coreutils/issues/375
With POSIX (and the LI18NUX2000 patch) backspaces back up by 1 column.
This matches terminal output. Note less(1) and thus grotty(1)
use per character backup accounting for their legacy bold/underline
markup format, so we'll keep --characters to enable that mode if needed.
This also avoids the issue of multiple backspaces
using the width of a single previous character.
* src/fold.c (adjust_column): Without -c,
have backspace back up by 1 column.
* doc/coreutils.texi (fold invocation): Mention that --characters
does per character width backspace accounting.
* tests/fold/fold-characters.sh: Add/Adjust test cases.
* NEWS: Mention the change in behavior.
Without this change, this test would fail during 'make distcheck', for
example.
* tests/misc/exec-bad-unicode.sh: Skip the test if $abs_top_builddir has
spaces or special characters.
* cfg.mk (_tb_misc): Also match tests/misc/exec-bad-unicode.sh.
Reported by Bruno Haible.
* tests/misc/no-fork.sh: Use an "unused" placeholder
so runcon is invoked with the correct number of arguments
where `id -Z` doesn't return anything.
This is needed since commit v9.12-53-g8555a51f2
cut, expand, fold, join, numfmt, unexpand, uniq, on non-GLIBC platforms
treated the \u0085 (next line) character as a blank character.
src/system.h (c32isvertspace): Include 0x0085 so c32issep() excludes it.
Also split out to ...
(c32isnewline): ... a new function, in case we need to
consider unicode newlines in isolation in future.
* tests/unexpand/mb.sh: Add a test case to both ensure
processing of \u0085 characters does not overflow a buffer,
and that those characters are not treated as separators.
* NEWS: Mention the fix.
Link: https://github.com/coreutils/coreutils/pull/361
Generate ASCII and UTF-8 data:
$ yes $(yes eeeaae | head -n10K | paste -s -d,) | head -n10K > ll.in
$ yes $(yes éééááé | head -n9 | paste -s -d,) | head -n1M > mb.in
ASCII is 14x faster:
$ time src/wc-before -m < ll.in
real 0m1.801s
$ time src/wc-after -m < ll.in
real 0m0.123s
UTF-8 is 7x faster:
$ time src/wc-before -m < mb.in
real 0m1.399s
$ time src/wc-after -m < mb.in
real 0m0.189s
* src/wc.c (wc): Use the u8_count() routine like cut(1),
to optimize counting valid UTF-8 characters.
* tests/wc/wc.pl: Add a test case.
* NEWS: Mention the improvement.
Commit v9.4-43-ga6064bb86 introduced this edge case
in handling multi-byte characters spanning the input buffer.
* src/wc.c (wc): Ensure we include the bytes previously read
but as yet unprocessed.
* tests/wc/mb-non-utf8.sh: Add a new test for miscounted GB118030 chars.
* tests/local.mk: Reference the new test.
* tests/wc/wc.pl: Add a new check for word count with a
UTF-8 space spanning a buffer boundary.
* NEWS: Mention the bug fix.
* tests/readlink/rl-1.sh: Add tests for the 'readlink' invocations that
would cause an infinite loop before commit b66f3e4e2 (realpath: fix an
infinite loop when resolving symbolic links, 2026-09-25). Also test the
behavior without an option, which would not cause the infinite loop.
* tests/misc/realpath.sh: Test the flags supported by 'realpath' that
would previously infinite loop before commit b66f3e4e2 (realpath: fix an
infinite loop when resolving symbolic links, 2026-09-25). Test an
invocation which would avoid the infinite loop by not touching the file.
These are the most common input encodings so worth optimizing for.
Performance was tested with GCC 16 on an i7-5600U with
CFLAGS='-march=native -O3 -flto' with the following setup:
$ yes | head -n10M > sl.in
$ yes $(yes eeeaae | head -n10K | paste -s -d' ') | head -n10K > llw.in
$ yes $(yes eeeaae | head -n9 | paste -s -d' ') | head -n1M > asw.in
$ yes $(yes éééááé | head -n9 | paste -s -d$'\xe2\x80\x83') |
head -n1M > mbw.in
for type in sl llw asw mbw; do
cat $type.in >/dev/null;
for imp in '-before' '-after'; do
echo ============ "${imp:-base}" $type ==============;
for d in -c; do
fields='-f1 -f10 -f100'
test "$d" = "-c" && { fields='-c1 -c10 -c100000'; d=''; }
for f in $fields; do
for loc in C.UTF-8; do
# Skip -b for UTF-8 as no different
test "$loc" = C.UTF-8 && echo "$f" | grep -q -- -b \
&& continue
# Skip multi-byte delimiter for C and not allowed
test "$loc" = C && test $(echo -n "$d" | wc -c) -ge 4 \
&& continue
bin=src/cut${imp}
LC_ALL=$loc $bin $f $d /dev/null 2>/dev/null &&
hyperfine --warmup=2 -m2 -M6 \
"LC_ALL=$loc $bin $f $d $type.in >/dev/null" ||
printf 'Benchmark 1: %s\n unsupported\n\n' \
"LC_ALL=$loc $bin $f $d $type.in >/dev/null"
done;
done;
done;
done;
done
After a little post-processing of the results, we get:
-- src/cut-before
| command | sl | llw | asw | mbw |
| --------------- | -------- | -------- | -------- | -------- |
| UTF8 -c1 | 70.7 ms | 103.5 ms | 26.9 ms | 48.6 ms |
| UTF8 -c10 | 55.1 ms | 103.9 ms | 48.6 ms | 127.3 ms |
| UTF8 -c100000 | 54.7 ms | 1.585 s | 156.9 ms | 555.9 ms |
-- src/cut-after
| command | sl | llw | asw | mbw |
| --------------- | -------- | -------- | -------- | -------- |
| UTF8 -c1 | 90.1 ms | 103.6 ms | 28.0 ms | 50.9 ms |
| UTF8 -c10 | 39.7 ms | 103.2 ms | 40.0 ms | 127.5 ms |
| UTF8 -c100000 | 39.0 ms | 104.4 ms | 18.5 ms | 30.3 ms |
* bootstrap.conf: Explicitly depend on unistr/u8-check.
* src/cut.c (cut_characters_mode): Quickly skip over unselected
ASCII/UTF-8 data.
* tests/cut/cut.pl: Add test cases.