* src/tail.c (struct File_spec): New member read_pos, replacing
size, since the value was really a read position not a size.
All uses changed.
(xlseek): Move defn up.
(record_open_fd): If the read_pos (formerly) size arg is unknown,
compute it here if it is a regular file.
(file_lines): Return the resulting read pos (or -1 on failure)
instead of storing it via a pointer. Caller changed.
Simplify by using SEEK_CUR instead of SEEK_SET when that is easy.
Avoid reading the same data twice when there are not enough
lines in the file.
(pipe_lines): Return -2 on success, -1 on failure, rather than
updating a read pos via a pointer (which was weird for pipes anyway).
Caller changed.
(pipe_bytes, tail_bytes, tail_lines, tail):
Return -1 on failure, a file offset if known, and < -1 otherwise,
instead of storing a file offset via a pointer. Caller changed.
(pipe_bytes): Take initial file offset as an arg, or -1 if unknown.
(start_bytes, start_lines): Return -1 (not 1) on error, -2 (not
-1) on EOF, and do not accept pointer to read pos as an arg since
neither we nor our caller know the read pos. Callers changed.
(recheck): Do not assume a newly-opened file is at offset zero,
as this is not always true on Solaris.
(tail_forever, check_fspec): Use dump_remainder result only
on regular files, to prevent (very unlikely) overflow.
(tail_file): Remove no-longer-needed TAIL_TEST_SLEEP code.
In the old days, safe_read acted more like what full_read does now.
When that went away, some code that invoked safe_read should
have gone back to plain 'read' but I guess we never got around to it.
Simplify this code by going back to plain 'read'.
Use safe_read only in csplit.c, which has a signal handler
and where 'read' can therefore fail with EINTR.
Although safe_read also checks for oversize buffers,
that is better done via io_blksize.
* src/cat.c (simple_cat, cat):
* src/head.c (copy_fd, elide_tail_lines_pipe)
* src/tac.c (tac_seekable, copy_to_temp):
(elide_tail_lines_seekable, head_lines):
* src/tail.c (dump_remainder, file_lines, pipe_lines)
(pipe_bytes, start_bytes, start_lines, tail_forever_inotify):
* src/tr.c (plain_read):
Use plain 'read', not safe_read, since there is no
need to worry about signals or oversize requests.
Also, there is no longer a need to include safe-read.h.
* src/ioblksize.h: Include sys-limits.h, for SYS_BUFSIZE_MAX.
(io_blksize): Max out at SYS_BUFSIZE_MAX.
* src/tail.c (struct File_spec, xwrite_stdout, file_lines)
(pipe_lines, pipe_bytes, start_bytes, any_live_files)
(tail_forever, any_remote_file, any_non_remote_file)
(any_symlinks, any_non_regular_fifo, tailable_stdin)
(tail_forever_inotify, ignore_fifo_and_pipe, main):
Prefer a signed type to size_t, if possible.
Ordinarily this is idx_t, but use int when the value
must fit in int anyway.
(file_lines): Similarly for blksize_t, which had no business
being here anyway.
(main): Check for overflow in the oddball case where ptrdiff_t is
narrower than int.
Signed types let us debug better, by using -fsanitize=undefined.
* doc/local.mk (doc/constants.texi):
Adjust change from macro to enum.
* src/tail.c (COPY_TO_EOF, COPY_A_BUFFER)
(DEFAULT_MAX_N_UNCHANGED_STATS_BETWEEN_OPENS):
Now enum constants, not macros.
(COPY_TO_EOF, COPY_A_BUFFER): Now negative, not positive.
(count_t): New typedef. Use it instead of uintmax_t.
(COUNT_MAX): New macro; use it instead of UINTMAX_MAX.
(struct File_spec, max_n_unchanged_stats_between_opens)
(dump_remainder, file_lines, pipe_lines, pipe_bytes)
(start_bytes, start_lines, tail_forever, check_fspec)
(tail_forever_inotify, tail_bytes, tail_lines, tail, tail_file)
(parse_obsolete_option, parse_options, main):
Prefer count_t to uintmax_t.
* src/tail.c (file_lines): Fix an unlikely bug where ‘tail -n N’
could output more than N lines if standard input is a largish
regular file with large initial offset that starts with (say) N-1
lines after the initial offset, but grows to N+1 lines between the
fstat and read calls. In this case ‘tail -n N’ now outputs N-1
lines, not N+1; that is, it pretends the file grew after ‘tail’
read it. That is better than outputting more than N lines.
* src/tail.c: Use ‘prettyname’ consistently as the identifier
for a prettified file name, as opposed to ‘pretty_filename’,
‘pretty_name’, and ‘name’. This makes the code easier to follow.
(struct File_spec): New member prettyname.
(pretty_name): Remove.
All uses of pretty_name (f) replaced by f->prettyname.
(close_fd, fremote): Accept struct File_spec, not name.
All callers changed.
(main): Initialize the new prettyname member.
This is simpler/smaller than calling pretty_name everywhere.
* src/tail.c (tail_lines): Refactor to simplify the confusing
code for using SEEK_END when counting lines. The old code
had a ‘end_pos != 0’ expression that was always true.
* src/tail.c (tail_bytes): New function.
(tail_bytes, tail_lines, tail): Accept struct stat pointer from
caller instead of calling fstat ourselves. All callers changed.
(tail_file): Skip a call to fstat if fstat already failed.
* tests/tail/follow-stdin.sh: Adjust to match new behavior
on failure, which omits a redundant diagnostic.
When the user specifies -c N where 2**63 <= N, don’t give
up and use the slow method (which will exhaust memory if
the file is large). Instead, treat it as N = 2**63 - 1,
since that has equivalent effect.
* src/tail.c (tail_bytes): With -c N and large N, adjust
the code so that lseeks can still be used without
affecting correctness. Formerly the code gave up and
did a sequential pass through the whole input, which
could easily exhaust memory.
This better matches the treatment of POSIX form,
e.g., ‘tail +Nc’ is now like ‘tail -c +N’ even when N is large.
* src/tail.c: Don’t include xstrtol.h.
(parse_obsolete_option): Treat numbers greater than UINTMAX_MAX as
if they are UINTMAX_MAX. Parse the number by hand with saturating
arithmetic; nowadays that’s simpler than using xstrtoumax. There
is no need for a diagnostic now, as the error cannot happen any more.
* tests/tail/tail.pl (obs-plus-c3): New test.
* src/tail.c (tail_bytes): Simplify the -c+N case by treating
regular files like other files; if the lseek fails for whatever
reason, fall back on the unoptimized version instead of reporting
a fatal error.
This affects behavior only on memory objects, which are not in Linux.
Formerly the code would use lseek on these objects,
but POSIX says the result of lseek is unspecified on them,
and in QNX lseek has undefined behavior on typed memory objects.
* src/head.c (elide_tail_bytes_file, elide_tail_lines_file):
Omit unnecessary uses of presume_input_pipe.
Improve some out-of-date comments.
(head): Do not assume a file is seekable merely because its
st_size is usable. Instead, seek only on regular files.
* src/od.c (skip): Do not seek on memory objects.
This is not true on Solaris when opening /dev/stdin; it could be
at a nonzero file offset. Arguably Linux should do likewise.
* src/wc.c (wc): Omit last arg, and act as if it is always -1.
All uses changed.
* src/head.c (diagnose_read_failure): New function.
Use it when possible, to simplify callers.
(head_bytes): Use copy_fd and diagnose_copy_fd_failure instead of
reinventing the wheel.
* NEWS: Improve wording to not imply POSIXLY_CORRECT=1 readlink -q will
be verbose.
* src/readlink.c (usage): Mention the affect of POSIXLY_CORRECT on
-s (--silent), -q (--quiet), and -v (--verbose) in the help message.
(main): Remove spurious newline added by previous commit.
* doc/coreutils.texi (readlink invocation): Mention that -s (--silent)
and -q (--quiet) are not the default when POSIXLY_CORRECT is set.
* src/readlink.c (main): Set verbose if the POSIXLY_CORRECT environment
variable is set.
* tests/readlink/readlink-posix.sh: New file.
* tests/local.mk (all_tests): Add it.
* NEWS: Mention the change.
* doc/coreutils.texi (readlink invocation): Document the behavior of
POSIXLY_CORRECT.
* src/system.h (x_timestyle_args): A new function refactored from ...
* src/ls.c (decode_switches): ... here.
* src/du.c: Use refactored x_timestyle_args() to output a custom error.
Addresses https://bugs.gnu.org/79113
This was seen to trigger the EXIT trap on cygwin
* cfg.mk (sc_prohibit_colon_redirection): Disallow all
cases of :> in tests/
* tests/cksum/md5sum-bsd.sh: Adjust to avoid more
stringent syntax check.
This should help avoid further audit confusion,
such as was just fixed by removing a FIXME.
* src/test.c (enum binop): New type.
(get_mtime): Return a struct timespec instead of returning
a bool and storing a struct timespec. All callers changed.
(binop): Return an int recording either success (an enum binop)
or failure (-1). All callers changed.
(binary_operator): Accept an enum binop, so that we need
not recompute the op type. All callers changed. Simplify.
the fallback error in binary_operator() was unreachable, since invalid
binary operators are rejected in three_arguments() via binop() which
returns false and prevents entry into binary_operator().
this dead code was unreachable and safe to remove
ref: line 636 where "binary operator expected" is generated.
Signed-off-by: Harry Fellowes <harryfellowes1@gmail.com>
Copyright-paperwork-exempt: Yes
* gnulib: Update to latest to get the fix to
propagate the appropriate error message.
* tests/install/basic-1.sh: Add a test case.
* NEWS: Mention the bug fix.
Addresses https://bugs.gnu.org/79072
* src/date.c (show_date_helper): Add a use_c_locale parameter.
(batch_convert): Add a format_in_c_locale parameter.
(main): Set format_in_c_locale to true if any of the options --rfc-3339,
--iso-8601, -R is seen.
Problem reported by Cosima Neidahl <https://bugs.gnu.org/78985#13>.
* tests/sort/sort-float.sh: At top level, use C locale at first.
(dbl_minima_order): Assume C locale.
Use string comparison for the fractional parts.
2025-07-10 Paul Eggert <eggert@cs.ucla.edu>
tests: fix integer overflow in sort-float
Problem reported by Cosima Neidahl <https://bugs.gnu.org/78985>.
* tests/sort/sort-float.sh (dbl_minima_order):
Use expr instead of test, to avoid problems with integers
too large for the shell.
Problem reported by Cosima Neidahl <https://bugs.gnu.org/78985>.
* tests/sort/sort-float.sh (dbl_minima_order):
Use expr instead of test to compare fractions,
to avoid problems with integers too large for the shell.
* src/factor.c (factor_using_pollard_rho)
(factor_using_pollard_rho2, mp_factor_using_pollard_rho):
Use int_fast64_t for internal counters rather than int, as int
could overflow on some somewhat-practical examples. Problem
discovered on a hypothetical platform where W_TYPE_SIZE is neither
32 nor 64, when factoring 0x7ffffffffffffeab7fffffffffff7369 ==
170141183460469225450570946617781744489, causing k to overflow in
mp_factor_using_pollard_rho. Presumably a similar problem exists
in the previous stable coreutils 9.7, too, on 32-bit platforms
with somewhat-larger test cases, though I haven’t take the
somewhat-extensive CPU time to discover it.