Suggested by L A Walsh in https://bugs.gnu.org/28763 .
* src/stat.c (fmt_terse_fs): Define format for --terse -f here.
(fmt_terse_regular): Define format for --terse here.
(fmt_terse_selinux): Likewise for when SELinux is enabled.
(default_format): Use the above constants.
(usage): Output the formats for the terse modes.
* src/df.c (main): stat() before open(), and avoid
the optional open when given a fifo argument.
* tests/df/unreadable.sh: Add a test case.
* NEWS: Mention the fix.
Fixes https://bugs.gnu.org/29038
* src/ls.c (DEFINE_SORT_FUNCTIONS): Apply _GL_ATTRIBUTE_PURE
to each strcmp-derived function definition, since GCC8 with
-Wsuggest-attribute=pure now warns it is needed.
* man/stat.x (SEE ALSO): Mention statfs(2) in addition to stat(2).
Note statfs() is generally used rather than statvfs(),
so we'll defer that reference to the SEE ALSO section of statfs(2).
Fixes https://bugs.gnu.org/28989
* tests/dd/nocache_eof.sh: Only run the O_DIRECT tests
when 512 byte alignment is supported. Otherwise with older
XFS on systems with > 1MiB pages, or on file systems not
supporting O_DIRECT, there would have been false failures.
* tests/dd/direct.sh: Clarify the skip message.
Previously with oflag=direct the call to invalidate_cache()
was not passed to the kernel, as it was less than a page size,
and a subsequent call was not made to invalidate the pending space.
Similarly with oflag=nocache the pending space at EOF was
not invalidated. Even though these amount to only a single page
in the page cache it can be significant. For example on
XFS before kernel patch v4.9-rc1-4-g0ee7a3f, O_DIRECT files
would have been read inefficiently if any pages were cached,
even if they were already synced to storage.
* src/dd.c (i_nocache_eof, o_nocache_eof): New bools used
to control when we want invalidate_cache(,0) to clear to EOF.
(cache_round): Use IO_BUFSIZE (currently 132KiB) to minimize
calls to the relatively expensive advise function, rather
than page_size. This also makes it clear that while the
kernel function operates on pages, this size is chosen for
performance reasons.
(invalidate_cache): Refactor to share more code between
input and output paths. Use i_nocache_eof and o_nocache_eof
rather than proxying off max_records. Ensure we
invalidate full pages when clearing to EOF as the kernel
will ignore any non complete pages. Fix the offset used
for the output path.
(dd_copy): Invalidate the cache of the input after the
offset is updated, for consistency and so we don't try to
invalidate before the start of the file. When we read
EOF on input, set flags so that we invalidate to EOF.
(main): Invalidate to EOF in more cases, by depending
on the i_nocache_eof and o_nocache_eof flags.
* doc/coreutils.texi (dd invocation): Clarify the alignment
and persisted caveats on the example applying "nocache"
to part of a file.
* tests/dd/nocache_eof.sh: A new test.
* tests/local.mk: Reference the new test.
* NEWS: Mention the bug fix.
Issue reported by Eric Bergen.
This should have been part of commit v8.28-17-gf926f7c
* src/stty.c (check_argument): Align line continuation chars,
and ensure the function macro is immune to usage with if/else.
Suggested by Jim Meyering and Paul Eggert.
This was a latent issue that became significant with
the addition of the -F option in FILEUTILS-3_16n-56-ge46a424
* src/stty.c (apply_settings): Refactor argument checking
to a function macro. Augment the argument check to ignore
NULLed out arguments (already processed -F).
* NEWS: Mention the fix.
* tests/misc/stty-invalid.sh: Add a test case.
Fixes https://bugs.gnu.org/28859
This fixes a regression from commit v8.26-39-g2f69dba
* src/timeout.c (block_cleanup_and_chld): Rename from block_cleanup
to indicate we also block SIGCHLD to avoid the race where SIGCHLD
fires between waitpid() polling and sigsuspend() waiting for a signal.
* NEWS: Mention the fix.
We inherit the signal mask from our parent process,
therefore ensure SIGCHLD is not blocked.
If SIGCHLD is blocked, sigsuspend() won't be interrupted
when the child process exits and we hang until the timeout (SIGALRM).
This fixes a regression from commit v8.26-39-g2f69dba
* src/timeout.c (install_sigchld): Ensure SIGCHLD is unblocked.
* NEWS: Mention the issue.
man pages change little between systems,
so falling back to distributed pages make sense
when cross compiling or lacking perl.
* man/local.mk: Add all man pages to EXTRA_DIST
so that they're distributed in the generated tarball.
Use the dummy-man page generator if cross compiling.
Set TZ to avoid a distcheck failure where man pages
used a diffent month than those rebuilt (with a .timestamp).
* man/dummy-man: Only fall back to generating a stub
if copying an existing man page fails.
* man/help2man: Sync portable TZ=UTC0 specification
from upstream help2man.
* NEWS: Mention the build-related change.
Fixes https://bugs.gnu.org/28574
* tests/split/filter.sh: Due to an invalid 'FILE = zero.in'
construct trying to initialize a FILE variable, it would
instead try to run the FILE command which is present on
macOS 10.13 with APFS.
We also remove a redundant duplicate test clause introduced
during a rebase, and simplify the piped timeout command,
to avoid requiring a subshell and associated quoting.
* THANKS.in: Add the reporter Jack Howarth.
Fixes https://bugs.gnu.org/28506
* tests/misc/expr.pl: Skip the quote varying tests in
the multi-byte locales as these tests aren't that interesting
in those locales. Also ERR_SUBST is already defined for
some tests so awkward to redefine to munge UTF8 quotes to ASCII.
Show offending argument instead of a generic 'syntax error' message.
Suggested by Bernhard Voelker in https://bugs.gnu.org/28461#13 .
* src/expr.c (syntax_error): Remove.
(required_more_args): New function.
(eval7, main): Replace syntax_error call with detailed die message.
* tests/misc/expr.pl: Add tests for new messages.
* doc/coreutils.texi: Remove doubled word.
* src/targetdir.c: Explicitly mark exported function.
* tests/local.mk: This is not a root only test.
* tests/mv/vulnerable-target.sh: Use returns_.
Introduced in v8.28-3-g44ccd1c
This was unintentionally removed in v8.27-60-g2ae1460
* src/shred.c (wipename): Interate through all name lengths.
* tests/misc/shred-remove.sh: Add test cases.
* NEWS: Mention the bug fix.
Fixes https://bugs.gnu.org/28507
* NEWS, doc/coreutils.texi (Target directory): Document this.
* src/cp.c, src/install.c, src/ln.c, src/mv.c: Include targetdir.h.
(target_directory_operand): Use the new targetdir_operand_type
function to check for vulnerable target directories.
* src/cp.c (stat_target_operand): New function.
(target_directory_operand, do_copy): Use it.
* src/local.mk (noinst_HEADERS): Add src/targetdir.h.
(src_ginstall_SOURCES, src_cp_SOURCES, src_ln_SOURCES)
(src_mv_SOURCES): Add src/targetdir.c.
* src/targetdir.c, src/targetdir.h: New files.
* tests/mv/vulnerable-target.sh: New test.
* tests/local.mk (all_root_tests): Add it.
* src/ptx.c (find_occurs_in_text): Die with an appropriate error
diagnostic when the given regular expression returns a match of
length 0.
* tests/misc/ptx.pl (S-infloop): Add a test.
* NEWS (Bug fixes): Mention the fix.
Fixes https://bugs.gnu.org/28417 which was detected using
Symbolic Execution techniques developed in the course of the
SYMBIOSYS research project at COMSYS, RWTH Aachen University.
* tests/ls/hyperlink.sh: If the hostname or any part of
the absolute path would be changed due to URL encoding,
the test would fail. Therefore simplify to remove
these components of the URL from consideration.
* gnulib: The only change in this gnulib update
is the tagging of the fts-tests module as longrunning,
which gnulib-tool currently implicitly excludes.
This test was seen to take about 20s and 285MB.
Reported by Assaf Gordon on space restricted VMs.
* src/tty.c (main): Don't distinguish ENOTTY from other errors,
because isatty() doesn't portably distinguish errors.
Solaris returns ENOENT for all input errors for example.
Musl also returns ENOENT, and ENODEV may be returned as disscussed at:
http://openwall.com/lists/musl/2017/04/06/6
* tests/misc/tty.sh: Adjust accordingly.
On some setups the root:object_r:tmp_t context is invalid.
This does indicate a limitation in the test framework,
but for now we'll relax this to skipping the tests.
The tests still run on a Fedora 25 system for example.
* tests/cp/cp-a-selinux.sh: Upon chcon error, skip rather than ERROR.
* tests/install/install-Z-selinux.sh: Likewise.
* tests/misc/chcon.sh: Likewise.
* tests/misc/runcon-no-reorder.sh: Likewise.
* tests/misc/selinux.sh: Likewise.
* tests/mkdir/restorecon.sh: Likewise.
* src/tty.c (main): All systems mention that isatty()
man return EINVAL as well as (the POSIX compliant) ENOTTY.
Also Centos 6 was seen to return EINVAL from ttyname().
* tests/misc/tty.sh: Fix a test issue where we assume
standard input is always a valid tty.
Reported by Assaf Gordon on OpenSolaris 5.10 and 5.11,
and Centos 6.5
This reverts commit v8.27-97-g8cb06d4 because
the setsid() fallback was not implemented correctly
and disabling the ioctl was not a complete solution
to the security issue of the child being passed
the tty of the parent.
Given runcon is not really a sandbox command,
the advice is to use `runcon ... setsid ...`
to avoid this particular issue.
We only use one of statfs or statvfs for `stat -f`
and on the BSDs we use statfs which doesn't have the
f_namelen member. However on OpenBSD and later FreeBSD
systems statfs does provide f_namemax, so use that.
* NEWS: Mention the improvement for OpenBSD and FreeBSD.
* m4/stat-prog.m4: Check for f_namemax in the statfs struct.
* src/stat.c: Return '?' rather than '*' when we can't
determine the max length of the file system.
* tests/ln/sf-1.sh: This test was failing on all BSDs
due to '*' being returned for the max length which
caused the test to attempt to create 1Mi+1 names.
The test now uses a short name when we can't determine
the max name length to use.
Reported by Assaf Gordon on various BSD based systems.
Similar to the issue with SELinux sandbox (CVE-2016-7545),
children of runcon can inject arbitrary input to the terminal
that would be run at the originating terminal privileges.
The new libseccomp dependency is widely available and used
on modern SELinux systems, but is not available by default
on older systems like RHEL6 etc.
* m4/jm-macros.m4: Check for libseccomp and
warn if unavailable on selinux supporting systems.
* src/local.mk: Link runcon with -lseccomp.
* src/runcon.c (disable_tty_inject): A new function to
disable use of the TIOCSTI using libseccomp, or with setsid()
where libseccomp is unavailable.
* tests/misc/runcon-no-inject.sh: A new test that uses
python to make the TIOCSTI call, and ensure that doesn't succeed.
* tests/local.mk: Reference the new test
* NEWS: Mention the fix.
Addresses http://bugs.gnu.org/24541
Terminals such as iTerm2 and VTE based terminals
(as of version 0.49.1), support hyperlinks when
passed terminals codes as described at:
https://gist.github.com/egmontkob/eb114294efbcd5adb1944c9f3cb5feda
* src/ls.c (gobble_file): Allocate an absolute file name to output.
(quote_name): Output the absolute name with the appropriate codes.
(file_escape): A new function to encode file names as per rfc8089.
(main): Handle the new option and call the file_escape_init() helper.
Disable --dired when --hyperlink is specified.
(print_dir): Get the absolute file name here too, so that the
directory name can be linkified.
* NEWS: Mention the new feature.
* tests/ls/hyperlink.sh: Add a new test.
* tests/local.mk: Reference the new test.
* doc/coreutils.texi (ls invocation): Describe --hyperlink.
This saves about 0.5MB uncompressed from the tarball.
* Makefile.am: Following on from v8.26-34-g2c64bc8
update the oldest documented version to 8.18 which
is now about 5 years old. Also remove older ChangeLogs
that were previously thought to be for changes not
in the git history, but are adequately recorded upon review.
* build-aux/ChangeLog-2007: Remove file.
* lib/ChangeLog-2007: Likewise.
* m4/ChangeLog-2007: Likewise.
This is useful when chaining with other commands that run commands in a
different context, while avoiding using the shell to cd, and thus
having to consider shell quoting the chained command.
* NEWS (New features): Document the new option.
* doc/coreutils.texi (env invocation): Likewise.
* src/env.c (usage): Likewise.
(main): Implement the new option.
* tests/misc/env.sh: Test the new option.
When systemd is configured to automount a remote file system - see
'man systemd.automount(5)', then the mount point is initially
mounted by systemd with the file system type "autofs".
When the resource is used later on, then the wanted file system is
mounted over that mount point on demand.
'df -l' triggered systemd to mount the file system because it called
stat() on the mount point.
Instead of single-casing "autofs" targets, we can avoid stat()ing
all dummy file systems (which includes "autofs"), because those are
skipped later on in get_dev() anyway.
*src/df.c (filter_mount_list): Also skip dummy file systems unless
the -a option or a specific target are given.
* NEWS: Mention the fix.
Co-authored-by: Bernhard Voelker <mail@bernhard-voelker.de>
Fixes http://bugzilla.suse.com/show_bug.cgi?id=1043059
The 'readlink' node has '@findex realpath' in it. This results in
info doc/coreutils.info realpath
incorrectly jumping to the 'readlink' node (instead of the 'realpath'
node). Change it to @cindex instead.
* doc/coreutils.texi (readlink): Change '@findex realpath' to @cindex.
* src/realpath.c (usage): Explicitly say 'DIR' instead of 'FILE' for
--relative-{to,base} parameters, to avoid giving the impression
that regular files can be used as relative base.
* doc/coreutils.texi (realpath): Same.
* src/ls.c (gobble_file): Disable the optimization to avoid quoting
if the symlink target itself needs quoting. This was introduced
with the quoting alignment adjustments in v8.25-106-g01971c0
* tests/ls/symlink-quote.sh: Add a test.
* tests/local.mk: Reference the test.
* NEWS: Mention the fix.