Commit Graph
28267 Commits
Author SHA1 Message Date
Paul Eggert 0cb602e33a doc: remove obsolete performance comment
sha512sum can be faster than sha256sum.
E.g., ‘dd if=/dev/zero bs=1024k count=1024 | time sha256sum’
reports 8.16 user CPU seconds on my host, whereas sha512sum
consumes 5.45 seconds (Fedora x86-64 on an AMD Phenom II X4 910e).
Although sha512sum is still considerably slower on x86, a good
chunk of uses are on 64-bit hosts and anyway there’s little point
to scaring people away from sha512sum nowadays.
* doc/coreutils.texi (sha2 utilities): Remove obsolete comment.
2015-10-16 12:07:07 -07:00
Jim Meyering e8d7e20530 maint: avoid uniq.c warning from bleeding-edge gcc's -Wstrict-overflow
* src/uniq.c (main): Make the type of "nfiles" unsigned,
to avoid a brand new warning from a gcc I built from today's
sources (gcc version 6.0.0 20151015 (experimental) (GCC)):
src/uniq.c:523:14: error: assuming signed overflow does not occur \
  when simplifying conditional to constant [-Werror=strict-overflow]
           if (nfiles == 2)
              ^
2015-10-16 08:02:51 -07:00
Pádraig Brady c249a5afc4 dircolors: support globbing of TERM entries
* src/dircolors.c (dc_parse_stream): Support globbing of
TERM entries, to allow entries like "TERM *256color*" for example.
* src/dircolors.hin: Reduce the internal list with globbing.
* tests/misc/dircolors.pl: New test cases.
* NEWS: Mention the improvement.
2015-10-16 12:23:30 +01:00
Pádraig Brady 3a68c3e990 tests: avoid false failure in rm/r-root.sh with gdb warnings
* tests/rm/r-root.sh: Skip the test if there are gdb warnings
that will impact further stderr checks.  For example some
buggy gdb versions may report "Got object file from memory
but can't read symbols: File truncated".  Also fix an incorrect
stderr check from the previous change.
Reported by Bernhard Voelker.
2015-10-15 11:55:18 +01:00
Pádraig Brady 2366daf725 tests: avoid false failure in rm/r-root.sh under load
* tests/rm/r-root.sh: Use gdb rather than timeout(1) as the
last resort protection against unlinkat() calls.  The timeout
of 2s was susceptible to false positives under load, and
gdb is stronger protection in any case.  We remove the
"expensive" tag on this test also since it should be robust.
Reported by Jim Meyering.
2015-10-15 08:44:22 +01:00
Pádraig Brady 0458701041 tests: avoid false failure in a tail test under load
* tests/tail-2/follow-stdin.sh: Use the standard tail
testing framework to avoid the race seen under very high load,
and also test the non inotify case.
Reported by Jim Meyering
2015-10-15 08:44:09 +01:00
Pádraig Brady f9fb9acb0d tests: avoid false failures with default ACLs
To reproduce:
  setfacl -dm group::rx .
  setfacl -dm other::rx .
  make check

* init.cfg (require_no_default_acl_): A new function to skip
when default ACLs are detected, or if the getfacl utility is
not available then skip if any non LSM ACLs detected.
* tests/cp/existing-perm-race.sh: Call require_no_default_acl_.
* tests/mkdir/parents.sh: Likewise.
* tests/mkdir/perm.sh: Likewise.
2015-10-14 15:23:14 +01:00
Pádraig Brady e6b3af647d tail: no longer warn about unrecognized file systems
* src/tail.c (fremote): No longer prompt the user to email
with the unrecognized file system constant, since we have
process in place to sync periodically with the latest Linux
constants, and the fall back polling mode is still fully functional.
2015-10-12 01:40:27 +01:00
Pádraig Brady 88eb88ee23 tests: avoid false failure when restorecon is ineffective
* tests/cp/cp-a-selinux.sh: Ensure we skip the portion of the test
depending on restorecon to be effective.  I.E. also skip when restorecon
warns, as it doesn't exit with error status when matchpathcon fails to
find a match for a file.  This is the case in /tmp on Fedora for
example, in which case the new destination that cp creates will have the
default security context of the process, rather than the explicit
context we set on the source file.
Details at: http://bugzilla.redhat.com/1247641
2015-10-10 17:05:37 +01:00
Pádraig Brady 934940b561 tests: make a long running test responsive to Ctrl-C
* tests/misc/sort-compress-hang.sh: Use --foreground with the
timeout(1) command (noting the caveats), to run the sort command
in the foreground program group, and thus be responsive to Ctrl-C.
This very_expensive_ test takes over a minute on a i3-2310M,
with RAM backed /tmp.
2015-10-10 11:21:34 +01:00
Pádraig Brady c1dba59a79 tests: adjust recent changes to virtual memory limits
* tests/dd/no-allocate.sh: Account for timeout(1) when
determining the required mem, as timeout has additional shared libs.
This avoids the need for the hardcoded 4M addition to the limit.
* tests/misc/head-c.sh: Increase the base limit, to account for
the fact that head(1) will allocate some additional mem in this case.
* tests/misc/cut-huge-range.sh: Remove mention of specific limits.
* tests/misc/printf-surprise.sh: Likewise.
Reported by Dmitry V. Levin
2015-10-08 03:54:02 +01:00
Pádraig Brady ce501787d4 csplit: remove erroneous mention of -m in --help
* src/csplit.c (usage): -m is not accepted, only --suppress-matched.
* tests/misc/csplit-suppress-matched.pl: Spelling fix.

Reported by Ondrej Oprala
2015-10-06 11:24:27 +01:00
Paul Eggert 88a7228bb2 tee: simplify argv handling
* src/tee.c (tee_files): Last arg is now char ** instead of char
const **, as that is a bit simpler.  All callers changed.  Modify
files[-1], not files[nfiles], as that is a bit faster and simpler.
Latter problem pointed out by Rainer Deyke in:
http://bugs.gnu.org/21611
2015-10-03 17:02:43 -07:00
Paul Eggert ac81caaf77 build: update gnulib submodule to latest 2015-10-03 00:32:34 -07:00
Paul Eggert f689642bac build: Pacify GCC 5 on 32-bit hosts
This pacifies GCC 5 in a better way, without disabling diagnostics.
* src/df.c (main): Tell compiler that optind is positive.
* src/shred.c (known): New function.
(dopass): Go back to off_t for file sizes.
Avoid integer overflow if we run off the end of the file.
Tell compiler that a write cannot write more bytes than requested.
2015-10-03 00:32:34 -07:00
Pádraig Brady 3ba68f9e64 tail: handle kernel dentry unlink race
Avoid the intermittent loss of "... has become inaccessible" messages.
That would cause tests/tail-2/assert.sh to fail sometimes,
mainly on uniprocessor systems.

* src/tail.c (tail_forever_inotify): Also monitor IN_DELETE
events on the directory, to avoid a dentry unlink()..open() race,
where the open() on the deleted file was seen to succeed after an,
unlink() and a subsequent IN_ATTRIB, was sent to tail.  Note an
IN_ATTRIB is sent on the monitored file to indicate the change in
number of links, and we can't just use a decrease in the number of
links to determine the file being unlinked, due to the possibility
of the file having multiple links.

Reported by Assaf Gordon and Ludovic Courtès.
Fixes http://bugs.gnu.org/21460
2015-10-03 03:03:24 +01:00
Pádraig Brady 00ac178893 build: avoid -Wstrict-overflow warnings with GCC 5.1 on 32 bit
* src/shred.c (dopass): With -O2, GCC 5.1 gives "assuming signed
overflow does not occur when simplifying conditional to constant"
warnings, in regard to the signed (off_t) variables.  Therefore
use unsigned (uintmax_t) instead, and a separate boolean to cater
for the special meaning of the negative part of the integer range.
Noticed at http://hydra.nixos.org/build/24983447
2015-10-03 02:54:51 +01:00
Pádraig Brady 8fe6f70f35 build: update gnulib submodule to latest
Includes a change to xalloc.h to avoid -Wstrict-overflow warnings
with GCC 5.1 on 32 bit with optimization enabled.  A subsequent
commit will fix similar issues in shred.
2015-10-03 02:54:44 +01:00
Dario Giovannetti a960c31c7d dircolors: add xterm-termite entry
* src/dircolors.hin: Add "xterm-termite" as this VTE based terminal
emulator is quite different from xterm, despite the name.
For example "Termite supports italic text and it won't work if TERM
is set to xterm. Even the backspace key won't work properly anymore
for applications relying on terminfo".
Reported also by Lukas Sabota and Sven-Hendrik Haase.
2015-10-02 16:59:50 +01:00
Dave Chiluk 3babaf8387 df: prioritize mounts nearer the device root
In the presence of bind mounts of a device, the 4th "mount root" field
from /proc/self/mountinfo is now considered, so as to prefer mount
points closer to the root of the device.  Note on older systems with
an /etc/mtab file, the source device was listed as the originating
directory, and so this was not an issue.
Details at http://pad.lv/1432871

* src/df.c (filter_mount_list): When deduplicating mount entries,
only prefer sources nearer or at the root of the device, when the
target is nearer the root of the device.
* NEWS: Mention the change in behavior.
2015-09-23 01:02:44 +01:00
Pádraig Brady 982c79fa14 build: update gnulib submodule to latest
This includes a change to propagate the 4th "mount root"
field from /proc/self/mountinfo from the mountlist module,
which is needed in a subsequent commit in df.

* gl/lib/regcomp.c.diff: Regenerate against latest gnulib.
* gl/lib/regex_internal.c.diff: Likewise.
* gl/lib/regex_internal.h.diff: Likewise.
* cfg.mk: Exclude diffs from trailing whitespace check,
which is generally correct, and now needed.
2015-09-23 01:02:44 +01:00
Bernhard Voelker 9db234ad09 maint: use adaptive approach for ulimit -v based tests
When configured with either 'symlinks' or 'shebangs' as value for
the --enable-single-binary option, tests based on `ulimit -v` are
skipped.  The reason is that the multicall 'coreutils' binary requires
much more memory due to shared libraries being loaded, and the size of
the 'date' binary (~290KiB) compared to the multicall binary (~5MiB),
of course.  Finally, in the case of 'shebangs', the starting shell
requires more memory, too

Instead of using hard-coded values for the memory limit, use an
adaptive approach: first determine the amount of memory for a similar,
yet more trivial invocation of the command, and then do the real test
run using that limit (plus some buffer in some cases).

* init.cfg (require_ulimit_v_): Remove function.
(get_min_ulimit_v_): Add function to determine the minimum memory limit
required for a given command in an adaptive way.
* cfg.mk (sc_prohibit_test_ulimit_without_require_): Change the name
of the above function in the syntax-check rule.
* tests/cp/link-heap.sh: Use the above function to determine the
minimum memory required to run a command simpler than in the real test
run.  Use that limit plus a buffer there.  While at it, change to list
of commands in the subshell to fail also if the beginning `ulimit -v`
fails.
* tests/dd/no-allocate.sh: Likewise.
* tests/misc/csplit-heap.sh: Likewise.
* tests/misc/cut-huge-range.sh: Likewise.
* tests/misc/head-c.sh: Likewise.
* tests/misc/printf-surprise.sh: Likewise.
* tests/split/line-bytes.sh: Likewise.
* tests/rm/many-dir-entries-vs-OOM.sh: Likewise - doing it separately
for each program under test.
2015-09-22 23:23:26 +02:00
Pádraig Brady 50e61bfdb9 maint: avoid deprecation warning with <selinux/flask.h>
* src/runcon.c (main): As per the compile time warning from
libselinux-2.4-3, lookup the class with string_to_security_class(),
rather than using defines from flask.h.
2015-09-22 19:09:32 +01:00
Pádraig Brady dee6b76010 sort,numfmt: with --debug, diagnose failure to set locale
* src/sort.c (main): With --debug, warn upon setlocale() failure,
which can happen due to incorrectly specified environment variables,
or due to memory exhaustion (simulated with ulimit -v), etc.
* tests/misc/sort-debug-warn.sh: Add a test case.
See also http://savannah.gnu.org/bugs/11004
2015-09-22 02:30:30 +01:00
Bernhard Voelker d4a22dff9b du: avoid to stat all mount points if possible
du calls stat for each mount point at startup.  This would block or
even make du fail if stat for an unrelated mount point hangs.
The result is not needed in the normal case anyway and therefore
should be avoided.  Issue introduced in commit v8.19-2-gcf7e1b5.

* src/du.c (fill_mount_table): Move function up as it's not used ...
(mount_point_in_fts_cycle): ... here, i.e., the DI_MNT set is
initialized and filled only iff FTS has detected a directory cycle.
(main): Remove the initialization and filling of the DI_MNT set here,
and free the DI_MNT set only if it was used.
2015-09-18 13:29:17 +02:00
Paul Eggert e4d8c99436 shred: don’t document -NUMBER option
The -NUMBER option was removed from ‘shred’ in 1999, but the
manual wasn’t updated to match.  Problem reported by Nick Rose in:
http://bugs.gnu.org/21502
* doc/coreutils.texi (shred invocation):
Remove documentation for -NUMBER option.
2015-09-17 00:38:13 -07:00
Assaf Gordon ba24c42e13 numfmt: use new set-fields module to parse --field
numfmt --field=LIST can accept the same options as cut.

* bootstrap.conf: remove xlist, linked-list
* src/local.mk: link numfmt with set-fields
* src/numfmt.c: use set-fields.c instead of custom field parsing code.
  (include_field): adapt to new code.
* tests/misc/numfmt.pl: add new tests, adapt current tests to new
  error message wording from set-fields.c
2015-09-12 02:27:32 +00:00
Assaf Gordon bd1bc2b3fe cut: refactor into set-fields module
Extract the functionality of parsing --field=LIST into a separate
module, to be used by other programs.

* src/cut.c: move field parsing code from here ...
* src/set-fields.{c,h}: ... to here.
  (set_fields): generalize by supporting multiple parsing/reporting
  options.
  (struct range_pair): rename to field_range_pair.
* src/local.mk: link cut with set-field.
* po/POTFILES.in: add set-field.c
* tests/misc/cut.pl: update wording of error messages
2015-09-12 02:27:32 +00:00
Pádraig Brady 5bbdcd2a02 maint: fix heap manipulations in previous commit
* src/sort.c (main): Ensure we don't free() and invalid
pointer when reading implicit stdin.  Also avoid
"definitely lost" valgrind warnings in the --files0-from case.
2015-09-08 12:56:04 +01:00
Pádraig Brady a4b640549d maint: avoid "definitely lost" valgrind warnings
Since commit v8.23-19-g8defcee, main() will return,
rather than call exit(), this inducing "definitely lost"
warnings in valgrind's leak checker.  That precludes using
the following to flag memory leaks:

  valgrind --leak-check=full --error-exitcode=1 \
           --errors-for-leak-kinds=definite

* src/pr.c (main): In dev builds, explicitly free memory allocated.
* src/sort.c (main): Likewise.
* src/tail.c (main): Likewise.
* src/tsort.c (tsort): Likewise.
2015-09-04 17:04:03 +01:00
Pádraig Brady 26c11773a4 tests: test numfmt stdin behavior
* tests/misc/tty-eof.pl: Add numfmt to the list of programs
that accept input on stdin.
2015-09-03 01:11:39 +01:00
Pádraig Brady 895a56c531 ls,ptx: restrict quotearg use to file name output
* src/ls.c (getenv_quoting_style, decode_switches, parse_ls_color):
Use quote() rather than quotearg(), as the latter defaults to
outputting the input unquoted.
* src/ptx.c (main): Likewise.
2015-09-03 01:11:32 +01:00
Pádraig Brady df3b9120b4 base64: no longer support hex or oct --wrap params
* src/base64.c (main): Support decimal numbers with leading zeros,
by disabling the auto detection of octal and hex.  It's not
envisaged that base conversion is needed for --wrap parameters,
and in the edge case it is, $((0x0)) shell constructs can be used.
* tests/misc/base64.pl: Adjust accordingly.
* NEWS: Mention the change in behavior.
2015-09-03 00:34:12 +01:00
Pádraig Brady a8cc9ce3f2 base64: use stricter validation on wrap column
* src/base64.c (main): Use the higher level xnumtoumax()
rather than xstrtoumax(), which is simpler and improves
validation of input.  Also pass the _empty_ rather than NULL
string as the suffixes parameter so that invalid trailing
characters are not allowed.  For example -w08 is now
flagged as an error, rather than being interpreted as 0.
A subsequent commit will further improve verification
of numbers with leading zeros by dropping backwards compatibility
wrt auto parsing oct and hex numbers.
* tests/misc/base64.pl: Add tests for invalid wrap values.
2015-09-03 00:34:12 +01:00
Pádraig Brady 89c517d9e2 base32: A new program similar to base64
Suggested in https://bugzilla.redhat.com/1250113

* AUTHORS: Add base32.
* THANKS.in: Add suggester.
* README: Reference the new program.
* NEWS: Mention the new program.
* src/.gitignore: Ignore the new binary.
* bootstrap.conf: Reference the gnulib base32 module.
* build-aux/gen-lists-of-programs.sh: Add base32.
* man/base32.x: A new template.
* man/.gitignore: Ignore the new man page.
* man/local.mk: Reference the new man page.
* doc/coreutils.texi (base32 invocation): Document the new command.
* src/local.mk: Adjust to build base32 based on base64.c.
* src/base64.c: Parameterize to use the correct headers,
functions and buffer sizes, depending on which binary
is being built.
* tests/misc/base64.pl: Adjust to test both base32 and base64.
* tests/misc/tty-eof.pl: Add base32 as a program that
accepts input on stdin without any options specified.
* scripts/git-hooks/commit-msg: Add base32 to the template.
2015-09-03 00:33:19 +01:00
Pádraig Brady affc8e8087 build: update gnulib submodule to latest
This includes a tweak to support building
the gnulib base32 module with -Wsuggest-attribute=const
2015-09-01 17:42:33 +01:00
Pádraig Brady a83f703a9b doc: clarify in --help/man where short options take no param
* src/shred.c (usage): For -u, separate the decscription
of the short and long option, to clarify that the short option
takes no parameter.
* src/split.c (usage): Likewise for -d.
* src/tee.c (usage): Likewise for -p.
* src/uniq.c (usage): Likewise for -D.

Suggested by Stephane Chazelas
2015-08-31 18:10:41 +01:00
Bernhard Voelker fd5f2b1569 tests: avoid FP of ls/stat-free-color.sh with newer glibc
Since glibc-2.22, specifically commit [0], the opendir() implementation
implicitly makes an additional stat call thus leading to a FP.
Seen on openSUSE:Tumbleweed since snapshot 20150821.

[0]
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=46f894d8c60a

* tests/ls/stat-free-color.sh: Change the test to verify that ls(1)
needs the same number of stat-like calls for a single, empty directory
argument as for one with a few directory entries (sub-directory,
regular file, symlink, etc.).
2015-08-30 22:49:35 +02:00
Pádraig Brady da5505dd7f doc: clarify where ambiguous if short options take no param
* doc/coreutils.texi (split invocation): Clarify that -d takes no param.
(uniq invocation): Likewise for -D.
(shred invocation): Likewise for -u.
(tee invocation): Likewise for -p.
2015-08-27 16:12:58 +01:00
Paul Eggert 97678abb6b ls: allow -w18446744073709551616
Problem reported by Beco in: http://bugs.gnu.org/21325
* src/ls.c (set_line_length): New function.
(decode_switches): Use it to decode COLUMNS and -w.
2015-08-22 18:31:13 -07:00
Bernhard Voelker 4ec9ccad79 maint: add syntax check to ensure larger man/*.x files have a Copyright
* cfg.mk (sc_man_check_x_copyright): Add rule to ensure that non-trivial
.x files in the 'man/' subdirectory, i.e., files exceeding a line count
of 20 or a byte count of 1000, contain a proper Copyright notice.
2015-08-18 20:27:48 +02:00
Paul Eggert 037e3b9847 build: fprintftime/nstrftime API changes
* bootstrap.conf (gnulib_modules): Add time_rz,
since the main source code now uses timezone_t.
* src/date.c (batch_convert, main, show_date):
* src/ls.c (align_nstrftime, long_time_expected_width)
(print_long_format):
* src/stat.c (human_time):
Use timezone_t rather than boolean to specify which time zone
is wanted.
* src/ls.c (localtz): New static var.
(main): Initialize it.
2015-07-23 18:52:15 -07:00
Paul Eggert 7131a33952 build: update gnulib submodule to latest 2015-07-23 18:52:15 -07:00
Pádraig Brady 6d67649d86 doc: discourage use of uname -i and -p options
* src/uname.c (usage): State that the non POSIX -i and -p options
are non-portable.
* doc/coreutils.texi (uname invocation): Mention the discrepancies
even across GNU/Linux distros, and that the results should
be used as informational only, rather than impacting any
logic decisions.
Fixes http://bugs.gnu.org/13001
2015-07-22 01:55:14 +01:00
Pádraig Brady 0b0d38b762 doc: improve man page for realpath -m
* src/realpath.c (usage): Mention 'directory' in the --help
output, so that ENOTDIR errors may be more easily investigated,
by inspecting the man page.
Reported at http://pad.lv/1474519
2015-07-15 14:37:05 +01:00
Peter Bray a652e7b63e tests: avoid test warning with perl >= 5.22
* doc/local.mk (sc-lower-case-var): Escape a literal
left curly bracket, needed with perl >= 5.22
Fixes http://bugs.gnu.org/21060
2015-07-15 11:39:49 +01:00
Peter Bray 9d2597161d sync: fix build with separate $(LIB_FDATASYNC)
* src/local.mk: Link with $(LIB_FDATASYNC) needed
on some Solaris 10 systems for example.
Fixes http://bugs.gnu.org/21059
2015-07-15 08:40:51 +01:00
Pádraig Brady 1a78f6a064 dircolors: add tmux entries
* src/dircolors.hin: tmux entries were added to ncurses in:
http://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff;\
f=misc/terminfo.src;h=ce9bdc3b;hp=7e576ef1;hb=be512fa0;hpb=ee1bcda2
2015-07-09 17:52:51 +01:00
Pádraig Brady 5e5d454037 shred: fix pattern selection for certain iteration counts
This was detected in about 25% of runs with gcc -fsanitize=address

  ERROR: AddressSanitizer: global-buffer-overflow on address ...
  READ of size 4 at 0x000000416628 thread T0
    #0 0x40479f in genpattern src/shred.c:782
    #1 0x4050d9 in do_wipefd src/shred.c:921
    #2 0x406203 in wipefile src/shred.c:1175
    #3 0x406b84 in main src/shred.c:1316
    #4 0x7f3454a1ef9f in __libc_start_main (/lib64/libc.so.6+0x1ff9f)
    #5 0x4025d8 (/tmp/coreutils-8.23/src/shred+0x4025d8)
  0x000000416628 is located 56 bytes to the left of
  global variable '*.LC49' from 'src/shred.c' (0x416660) of size 17
  0x000000416628 is located 12 bytes to the right of
  global variable 'patterns' from 'src/shred.c' (0x416540) of size 220
  SUMMARY: AddressSanitizer: global-buffer-overflow src/shred.c:782

* src/shred.c (gen_patterns): Restrict pattern selection
to the K available, which regressed due to v5.92-1462-g65533e1.
* tests/misc/shred-passes.sh: Add a deterministic test case.
* NEWS: Mention the bug fix.
Fixes http://bugs.gnu.org/20998
2015-07-07 03:26:58 +01:00
Pádraig Brady c5ff0d989f maint: post-release administrivia
* NEWS: Add header line for next release.
* .prev-version: Record previous version.
* cfg.mk (old_NEWS_hash): Auto-update.
2015-07-03 22:23:56 +01:00