/usr/bin/msgfmt: po/fr.po: warning: PO file header fuzzy
warning: older versions of msgfmt will give an error on this
Apparently, not all versions of msgfmt produce this. Quick fix for
now, more to be researched later.
Commit b5a9b18c introduced block streaming infrastructure with a special
fast path for all-cached scans, and commit b7b0f3f2 connected the
infrastructure up to sequential scans. One of the fast path
micro-optimizations had an unintended consequence: it interfered with
parallel sequential scan's block range allocator (from commit 56788d21),
which has its own ramp-up and ramp-down algorithm when handing out
groups of pages to workers. A scan of an all-cached table could give
extra blocks to one worker, when others had finished. In some plans
(probably already very bad plans, such as the one reported by
Alexander), the unfairness could be magnified.
An internal buffer of 16 block numbers is removed, keeping just a single
block buffer for technical reasons.
Back-patch to 17.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/63a63690-dd92-c809-0b47-af05459e95d1%40gmail.com
This change improves the description of the
restrict_nonsystem_relation_kind parameter in guc_table.c and the
documentation for better clarity.
Backpatch to 12, where this GUC parameter was introduced.
Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/6a96f1af-22b4-4a80-8161-1f26606b9ee2%40eisentraut.org
Backpatch-through: 12
This test occasionally shows
+WARNING: could not get result of cancel request due to timeout
which appears to be because the cancel request is sometimes unluckily
sent to the remote session between queries, and then it's ignored.
This patch tries to make that less probable in three ways:
1. Use a test query that does not involve remote estimates, so that
no EXPLAINs are sent.
2. Make sure that the remote session is ready-to-go (transaction
started, SET commands sent) before we start the timer.
3. Increase the statement_timeout to 100ms, to give the local
session enough time to plan and issue the query.
We might have to go higher than 100ms to make this adequately
stable in the buildfarm, but let's see how it goes.
Back-patch to v17 where this test was introduced.
Jelte Fennema-Nio and Tom Lane
Discussion: https://postgr.es/m/578934.1725045685@sss.pgh.pa.us
Commit 2489d76c4 removed some logic from pullup_replace_vars()
that avoided wrapping a PlaceHolderVar around a pulled-up
subquery output expression if the expression could be proven
to go to NULL anyway (because it contained Vars or PHVs of the
pulled-up relation and did not contain non-strict constructs).
But removing that logic turns out to cause performance regressions
in some cases, because the extra PHV blocks subexpression folding,
and will do so even if outer-join reduction later turns it into a
no-op with no phnullingrels bits. This can for example prevent
an expression from being matched to an index.
The reason for always adding a PHV was to ensure we had someplace
to put the varnullingrels marker bits of the Var being replaced.
However, it turns out we can optimize in exactly the same cases that
the previous code did, because we can instead attach the needed
varnullingrels bits to the contained Var(s)/PHV(s).
This is not a complete solution --- it would be even better if we
could remove PHVs after reducing them to no-ops. It doesn't look
practical to back-patch such an improvement, but this change seems
safe and at least gets rid of the performance-regression cases.
Per complaint from Nikhil Raj. Back-patch to v16 where the
problem appeared.
Discussion: https://postgr.es/m/CAG1ps1xvnTZceKK24OUfMKLPvDP2vjT-d+F2AOCWbw_v3KeEgg@mail.gmail.com
If an ORDER BY item in SELECT is a bare identifier, the parser
first seeks it as an output column name of the SELECT (for SQL92
compatibility). However, ruleutils.c is expecting the SQL99
interpretation where such a name is an input column name. So it's
possible to produce an incorrect display of a view in the (admittedly
pretty ill-advised) case where some other column is renamed in the
SELECT output list to match an ORDER BY column.
This can be fixed by table-qualifying such names in the dumped
view text. To avoid cluttering less-ill-advised queries, we'd
like to do so only when there's an actual name conflict.
That requires passing the current get_query_def call's resultDesc
parameter down to get_variable, so that it can determine what
the output column names are. In hopes of reducing rather than
increasing notational clutter in ruleutils.c, I moved that value
into the deparse_context struct and removed it from the parameter
lists of get_query_def's other subroutines.
I made a few other cosmetic changes while at it:
* Likewise move the colNamesVisible parameter into deparse_context.
* Rename deparse_context's windowTList field to targetList,
since it's no longer used only in connection with WINDOW clauses.
* Replace the special_exprkind field with a bool inGroupBy,
since that was all it was being used for, and the apparent
flexibility of storing a ParseExprKind proved to be illusory.
(We need a separate varInOrderBy field to make this patch work.)
* Remove useless save/restore logic in get_select_query_def.
In principle, this bug is quite old. However, it seems unreachable
before 1b4d280ea, because before that the presence of "new" and "old"
entries in a view's rangetable caused us to always table-qualify every
Var reference in dumped views. Hence, back-patch to v16 where that
came in.
Per bug #18589 from Quynh Tran.
Discussion: https://postgr.es/m/18589-70091cb81db1a3f1@postgresql.org
Commit 5bec1d6bc5 changed the memory usage updates of the
ReorderBufferTXN to zero all at once by subtracting txn->size, rather
than updating it for each change. However, if TOAST reconstruction
data remained in the transaction when freeing it, there were cases
where it further subtracted the memory counter from zero, resulting in
an assertion failure.
This change calculates the memory size for each change and updates the
memory usage to precisely the amount that has been freed.
Backpatch to v17, where this was introducd.
Reviewed-by: Amit Kapila, Shlok Kyal
Discussion: https://postgr.es/m/CAD21AoAqkNUvicgKPT_dXzNoOwpPkVTg0QPPxEcWmzT0moCJ1g%40mail.gmail.com
Backpatch-through: 17
Add bounds checking to nbtree's lookahead/skip-within-a-page mechanism.
Otherwise it's possible for cases with lots of before-array-keys tuples
to overflow an int16 variable, causing the mechanism to generate an out
of bounds page offset number.
Oversight in commit 5bf748b8, which enhanced nbtree ScalarArrayOp
execution.
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/6c68ac42-bbb5-8b24-103e-af0e279c536f@gmail.com
Backpatch: 17-, where nbtree SAOP execution was enhanced.
As per the policy established in commit 6991e774e, invent macros
that can be tested at compile time to detect presence of new libpq
features. This should make calling code more readable and less
error-prone than checking the libpq version would be (especially
since we don't expose that at compile time; the server version is
an unreliable substitute).
Discussion: https://postgr.es/m/2042418.1724346970@sss.pgh.pa.us
It's normal for the name in a free slot to match the new name. The
max_inuse mechanism kept simple cases from reaching the problem. The
problem could appear when index 0 was the previously-detached entry and
index 1 is in use. Back-patch to v17, where this code first appeared.
Currently, createPartitionTable() opens newly created table using its name.
This approach is prone to privilege escalation attack, because we might end
up opening another table than we just created.
This commit address the issue above by opening newly created table by its
OID. It appears to be tricky to get a relation OID out of ProcessUtility().
We have to extend TableLikeClause with new newRelationOid field, which is
filled within ProcessUtility() to be further accessed by caller.
Security: CVE-2014-0062
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20240808171351.a9.nmisch%40google.com
Reviewed-by: Pavel Borisov, Dmitry Koval
For a long time we have forbidden binary-coercible casts to or from
composite and array types, because such a cast cannot work correctly:
the type OID embedded in the value would need to change, but it won't
in a binary coercion. That reasoning applies equally to range types,
but we overlooked installing a similar restriction here when we
invented range types. Do so now.
Given the lack of field complaints, we won't change this in stable
branches, but it seems not too late for v17.
Per discussion of a problem noted by Peter Eisentraut.
Discussion: https://postgr.es/m/076968e1-0852-40a9-bc0b-117cd3f0e43c@eisentraut.org
We advance origin progress during abort on successful streaming and
application of ROLLBACK in parallel streaming mode. But the origin
shouldn't be advanced during an error or unsuccessful apply due to
shutdown. Otherwise, it will result in a transaction loss as such a
transaction won't be sent again by the server.
Reported-by: Hou Zhijie
Author: Hayato Kuroda and Shveta Malik
Reviewed-by: Amit Kapila
Backpatch-through: 16
Discussion: https://postgr.es/m/TYAPR01MB5692FAC23BE40C69DA8ED4AFF5B92@TYAPR01MB5692.jpnprd01.prod.outlook.com
The descriptions for ProcArrayGroupUpdate and XactGroupUpdate claim
that these events mean we are waiting for the group leader "at end
of a parallel operation," but neither pertains to parallel
operations. This commit reverts these descriptions to their
wording before commit 3048898e73, i.e., "end of a parallel
operation" is changed to "transaction end."
Author: Sameer Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAGPeHmh6UMrKQHKCmX%2B5vV5TH9P%3DKw9en3k68qEem6J%3DyrZPUA%40mail.gmail.com
Backpatch-through: 13
When a partition is detached and immediately dropped, a prepared
statement could try to compute a new partition descriptor that includes
it. This leads to this kind of error:
ERROR: could not open relation with OID 457639
Avoid this by skipping the partition in expand_partitioned_rtentry if it
doesn't exist.
Noted by me while investigating bug #18559. Kuntal Gosh helped to
identify the exact failure.
Backpatch to 14, where DETACH CONCURRENTLY was introduced.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kuntal Ghosh <kuntalghosh.2007@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/202408122233.bo4adt3vh5bi@alvherre.pgsql
Add a comment explaining dropdb() can't rely on syscache. The issue with
flattened rows was fixed by commit 0f92b230f8, but better to have
a clear explanation why the systable scan is necessary. The other places
doing in-place updates on pg_database have the same comment.
Suggestion and patch by Yugo Nagata. Backpatch to 12, same as the fix.
Author: Yugo Nagata
Backpatch-through: 12
Discussion: https://postgr.es/m/CAJTYsWWNkCt+-UnMhg=BiCD3Mh8c2JdHLofPxsW3m2dkDFw8RA@mail.gmail.com
Commit ca051d8b10 called newlocale(LC_COLLATE, ...) instead of
newlocale(LC_COLLATE_MASK, ...), in code reached only on FreeBSD. They
have the same value on that OS, explaining why it worked. Fix.
Back-patch to 14, where ca051d8b10 landed.
MacPorts version 2.9.3 started failing in our ci_macports_packages.sh
script, for reasons not fully determined, but plausibly linked to the
release of 2.10.1. 2.10.1 seems to work, so let's switch to it.
Back-patch to 15, where CI began.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/81f104e8-f0a9-43c0-85bd-2bbbf590a5b8%40eisentraut.org
Commit c66a7d75e6 modified DROP DATABASE so that if interrupted, the
database is known to be in an invalid state and can only be dropped.
This is done by setting a flag using an in-place update, so that it's
not lost in case of rollback.
For databases with many ACLs, this may however fail like this:
ERROR: wrong tuple length
This happens because with many ACLs, the pg_database.datacl attribute
gets TOASTed. The dropdb() code reads the tuple from the syscache, which
means it's detoasted. But the in-place update expects the tuple length
to match the on-disk tuple.
Fixed by reading the tuple from the catalog directly, not from syscache.
Report and fix by Ayush Tiwari. Backpatch to 12. The DROP DATABASE fix
was backpatched to 11, but 11 is EOL at this point.
Reported-by: Ayush Tiwari
Author: Ayush Tiwari
Reviewed-by: Tomas Vondra
Backpatch-through: 12
Discussion: https://postgr.es/m/CAJTYsWWNkCt+-UnMhg=BiCD3Mh8c2JdHLofPxsW3m2dkDFw8RA@mail.gmail.com
