Previously autovacuum was not necessarily triggered if space in the
members slru got tight. The first problem was that the signalling was
tied to values in the offsets slru, but members can advance much
faster. Thats especially a problem if old sessions had been around that
previously prevented the multixact horizon to increase. Secondly the
skipping logic doesn't work if the database was restarted after
autovacuum was triggered - that knowledge is not preserved across
restart. This is especially a problem because it's a common
panic-reaction to restart the database if it gets slow to
anti-wraparound vacuums.
Fix the first problem by separating the logic for members from
offsets. Trigger autovacuum whenever a multixact crosses a segment
boundary, as the current member offset increases in irregular values, so
we can't use a simple modulo logic as for offsets. Add a stopgap for
the second problem, by signalling autovacuum whenver ERRORing out
because of boundaries.
Discussion: 20150608163707.GD20772@alap3.anarazel.de
Backpatch into 9.3, where it became more likely that multixacts wrap
around.
9a20a9b2 added a new elog(), enabled when WAL_DEBUG is defined. The
other WAL_DEBUG dependant messages check for the wal_debug GUC, but this
one did not. While at it replace 'upto' with 'up to'.
Discussion: 20150610110253.GF3832@alap3.anarazel.de
Backpatch to 9.4, the first release containing 9a20a9b2.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values, but commit 5f538ad004
neglected to account for setlocale(LC_CTYPE, NULL) doing so. The effect
was to set the LC_CTYPE environment variable to an unintended value.
pg_perm_setlocale() sets this variable to assist PL/Perl; without it,
Perl would undo PostgreSQL's locale settings. The known-affected
configurations are 32-bit, release builds using Visual Studio 2012 or
Visual Studio 2013. Visual Studio 2010 is unaffected, as were all
buildfarm-attested configurations. In principle, this bug could leave
the wrong LC_CTYPE in effect after PL/Perl use, which could in turn
facilitate problems like corrupt tsvector datums. No known platform
experiences that consequence, because PL/Perl on Windows does not use
this environment variable.
The bug has been user-visible, as early postmaster failure, on systems
with Windows ANSI code page set to CP936 for "Chinese (Simplified, PRC)"
and probably on systems using other multibyte code pages.
(SetEnvironmentVariable() rejects values containing character data not
valid under the Windows ANSI code page.) Back-patch to 9.4, where the
faulty commit first appeared.
Reported by Didi Hu and 林鹏程. Reviewed by Tom Lane, though this fix
strategy was not his first choice.
This adjusts commit 82233ce7ea so that the
postmaster does not exit until all its child processes have exited, even
if the 5-second timeout elapses and we have to send SIGKILL. There is no
great value in having the postmaster process quit sooner, and doing so can
mislead onlookers into thinking that the cluster is fully terminated when
actually some child processes still survive.
This effect might explain recent test failures on buildfarm member hamster,
wherein we failed to restart a cluster just after shutting it down with
"pg_ctl stop -m immediate".
I also did a bit of code review/beautification, including fixing a faulty
use of the Max() macro on a volatile expression.
Back-patch to 9.4. In older branches, the postmaster never waited for
children to exit during immediate shutdowns, and changing that would be
too much of a behavioral change.
This avoids the problem that it might go to sleep for an unreasonable
amount of time in unusual conditions like the server clock moving
backwards an unreasonable amount of time.
(Simply moving the server clock forward again doesn't solve the problem
unless you wake up the autovacuum launcher manually, say by sending it
SIGHUP).
Per trouble report from Prakash Itnal in
https://www.postgresql.org/message-id/CAHC5u79-UqbapAABH2t4Rh2eYdyge0Zid-X=Xz-ZWZCBK42S0Q@mail.gmail.com
Analyzed independently by Haribabu Kommi and Tom Lane.
Since find_multixact_start() relies on SimpleLruDoesPhysicalPageExist(),
and that function looks only at the on-disk state, it's possible for it
to fail to find a page that exists in the in-memory SLRU that has not
been written yet. If that happens, SetOffsetVacuumLimit() will
erroneously decide to force emergency autovacuuming immediately.
We should probably fix find_multixact_start() to consider the data
cached in memory as well as on the on-disk state, but that's no excuse
for SetOffsetVacuumLimit() to be stupid about the case where it can
no longer read the value after having previously succeeded in doing so.
Report by Andres Freund.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values. Commit 5f538ad004
neglected to account for that. In advance of fixing that bug, switch to
failing hard on affected configurations. This is a planned temporary
commit to assay buildfarm-represented configurations.
jsonb_set() and other clients of the setPathArray() utility function
could get spurious results when an array integer subscript is provided
that is not within the range of int.
To fix, ensure that the value returned by strtol() within setPathArray()
is within the range of int; when it isn't, assume an invalid input in
line with existing, similar cases. The path-orientated operators that
appeared in PostgreSQL 9.3 and 9.4 do not call setPathArray(), and
already independently take this precaution, so no change there.
Peter Geoghegan
We already tried to improve this once, but the "improved" text was rather
off-target if you had provided a USING clause. Also, it seems helpful
to provide the exact text of a suggested USING clause, so users can just
copy-and-paste it when needed. Per complaint from Keith Rarick and a
suggestion from Merlin Moncure.
Back-patch to 9.2 where the current wording was adopted.
After the archiver dies, postmaster tries to start a new one immediately.
But previously this could happen only while server was running normally
even though archiving was enabled always (i.e., archive_mode was set to
always). So the archiver running during recovery could not restart soon
after it died. This is an oversight in commit ffd3774.
This commit changes reaper(), postmaster's signal handler to cleanup
after a child process dies, so that it tries to a new archiver even during
recovery if necessary.
Patch by me. Review by Alvaro Herrera.
System catalogs and views should be listed alphabetically
in catalog.sgml, but only pg_file_settings view not.
This patch also fixes typos in pg_file_settings comments.
We don't know why a few Windows users have seen this fail, but the
taciturnity of the error message certainly isn't helping debug it.
Let's at least find out which LC category isn't working.
* Remove unused argument "dstfname" and related code from XLogFileCopy().
* Previously XLogFileCopy() returned a pstrdup'd string so that
InstallXLogFileSegment() used it later. Since the pstrdup'd string was never
free'd, there could be a risk of memory leak. It was almost harmless because
the startup process exited just after calling XLogFileCopy(), it existed.
This commit changes XLogFileCopy() so that it directly calls
InstallXLogFileSegment() and doesn't call pstrdup() at all. Which fixes that
memory leak problem.
* Extend InstallXLogFileSegment() so that the caller can specify the log level.
Which allows us to emit an error when InstallXLogFileSegment() fails a disk
file access like link() and rename(). Previously it was always logged with
LOG level and additionally needed to be logged with ERROR when we wanted
to treat it as an error.
Michael Paquier
HotStandbyActiveInReplay, introduced in 061b079f, only allowed WAL
replay to happen in the startup process, missing the single user case.
This buglet is fairly harmless as it only causes problems when single
user mode in an assertion enabled build is used to replay a btree vacuum
record.
Backpatch to 9.2. 061b079f was backpatched further, but the assertion
was not.
Supporting deletion of JSON pairs within jsonb objects using an
array-style integer subscript allowed for surprising outcomes. This was
mostly due to the implementation-defined ordering of pairs within
objects for jsonb.
It also seems desirable to make jsonb integer subscript deletion
consistent with the 9.4 era general purpose integer subscripting
operator for jsonb (although that operator returns NULL when an object
is encountered, while we prefer here to throw an error).
Peter Geoghegan, following discussion on -hackers.
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 7863404417), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
We should set MyProc->databaseId after acquiring the per-database lock,
not beforehand. The old way risked deadlock against processes trying to
copy or delete the target database, since they would first acquire the lock
and then wait for processes with matching databaseId to exit; that left a
window wherein an incoming process could set its databaseId and then block
on the lock, while the other process had the lock and waited in vain for
the incoming process to exit.
CountOtherDBBackends() would time out and fail after 5 seconds, so this
just resulted in an unexpected failure not a permanent lockup, but it's
still annoying when it happens. A real-world example of a use-case is that
short-duration connections to a template database should not cause CREATE
DATABASE to fail.
Doing it in the other order should be fine since the contract has always
been that processes searching the ProcArray for a database ID must hold the
relevant per-database lock while searching. Thus, this actually removes
the former race condition that required an assumption that storing to
MyProc->databaseId is atomic.
It's been like this for a long time, so back-patch to all active branches.
Recent commits, mainly b69bf30b9b and
53bb309d2d, introduced mechanisms to
protect against wraparound of the MultiXact member space: the number
of multixacts that can exist at one time is limited to 2^32, but the
total number of members in those multixacts is also limited to 2^32,
and older code did not take care to enforce the second limit,
potentially allowing old data to be overwritten while it was still
needed.
Unfortunately, these new mechanisms failed to account for the fact
that the code paths in which they run might be executed during
recovery or while the cluster was in an inconsistent state. Also,
they failed to account for the fact that users who used pg_upgrade
to upgrade a PostgreSQL version between 9.3.0 and 9.3.4 might have
might oldestMultiXid = 1 in the control file despite the true value
being larger.
To fix these problems, first, avoid unnecessarily examining the
mmembers of MultiXacts when the cluster is not known to be consistent.
TruncateMultiXact has done this for a long time, and this patch does
not fix that. But the new calls used to prevent member wraparound
are not needed until we reach normal running, so avoid calling them
earlier. (SetMultiXactIdLimit is actually called before InRecovery
is set, so we can't rely on that; we invent our own multixact-specific
flag instead.)
Second, make failure to look up the members of a MultiXact a non-fatal
error. Instead, if we're unable to determine the member offset at
which wraparound would occur, postpone arming the member wraparound
defenses until we are able to do so. If we're unable to determine the
member offset that should force autovacuum, force it continuously
until we are able to do so. If we're unable to deterine the member
offset at which we should truncate the members SLRU, log a message and
skip truncation.
An important consequence of these changes is that anyone who does have
a bogus oldestMultiXid = 1 value in pg_control will experience
immediate emergency autovacuuming when upgrading to a release that
contains this fix. The release notes should highlight this fact. If
a user has no pg_multixact/offsets/0000 file, but has oldestMultiXid = 1
in the control file, they may wish to vacuum any tables with
relminmxid = 1 prior to upgrading in order to avoid an immediate
emergency autovacuum after the upgrade. This must be done with a
PostgreSQL version 9.3.5 or newer and with vacuum_multixact_freeze_min_age
and vacuum_multixact_freeze_table_age set to 0.
This patch also adds an additional log message at each database server
startup, indicating either that protections against member wraparound
have been engaged, or that they have not. In the latter case, once
autovacuum has advanced oldestMultiXid to a sane value, the message
indicating that the guards have been engaged will appear at the next
checkpoint. A few additional messages have also been added at the DEBUG1
level so that the correct operation of this code can be properly audited.
Along the way, this patch fixes another, related bug in TruncateMultiXact
that has existed since PostgreSQL 9.3.0: when no MultiXacts exist at
all, the truncation code looks up NextMultiXactId, which doesn't exist
yet. This can lead to TruncateMultiXact removing every file in
pg_multixact/offsets instead of keeping one around, as it should.
This in turn will cause the database server to refuse to start
afterwards.
Patch by me. Review by Álvaro Herrera, Andres Freund, Noah Misch, and
Thomas Munro.
add_path_precheck was doing exact comparisons of path costs, but it really
needs to do them fuzzily to be sure it won't reject paths that could
survive add_path's comparisons. (This can only matter if the initial cost
estimate is very close to the final one, but that turns out to often be
true.)
Also, it should ignore startup cost for this purpose if and only if
compare_path_costs_fuzzily would do so. The previous coding always ignored
startup cost for parameterized paths, which is wrong as of commit
3f59be836c555fa6; it could result in improper early rejection of paths that
we care about for SEMI/ANTI joins. It also always considered startup cost
for unparameterized paths, which is just as wrong though the only effect is
to waste planner cycles on paths that can't survive. Instead, it should
consider startup cost only when directed to by the consider_startup/
consider_param_startup relation flags.
Likewise, compare_path_costs_fuzzily should have symmetrical behavior
for parameterized and unparameterized paths. In this case, the best
answer seems to be that after establishing that total costs are fuzzily
equal, we should compare startup costs whether or not the consider_xxx
flags are on. That is what it's always done for unparameterized paths,
so let's make the behavior for parameterized paths match.
These issues were noted while developing the SEMI/ANTI join costing fix
of commit 3f59be836c, but we chose not to back-patch these fixes,
because they can cause changes in the planner's choices among
nearly-same-cost plans. (There is in fact one minor change in plan choice
within the core regression tests.) Destabilizing plan choices in back
branches without very clear improvements is frowned on, so we'll just fix
this in HEAD.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
The function is given a fourth parameter, which defaults to true. When
this parameter is true, if the last element of the path is missing
in the original json, jsonb_set creates it in the result and assigns it
the new value. If it is false then the function does nothing unless all
elements of the path are present, including the last.
Based on some original code from Dmitry Dolgov, heavily modified by me.
Catalog version bumped.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
This undoes a poorly-thought-out choice in commit 970a18687f, namely
to export guc.c's internal variable data_directory. The authoritative
variable so far as C code is concerned is DataDir; there is no reason for
anything except specific bits of GUC code to look at the GUC variable.
After yesterday's commits fixing the fsync-on-restart patch, the only
remaining misuse of data_directory was in AlterSystemSetConfigFile(),
which would be much better off just using a relative path anyhow: it's
less code and it doesn't break if the DBA moves the data directory of a
running system, which is a case we've taken some pains over in the past.
This is mostly cosmetic, so no need for a back-patch (and I'd be hesitant
to remove a global variable in stable branches anyway).
Commit 2ce439f337 introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
Ensure that we null-terminate the result string (one place in pg_rewind).
Be paranoid about out-of-range results from readlink() (should not happen,
but there is no good reason for some call sites to be careful about it and
others not). Consistently use the whole buffer, not sometimes one byte
less. Ensure we emit an appropriate errcode() in all cases. Spell the
error messages the same way.
The only serious bug here is the missing null-termination in pg_rewind,
which is new code, so no need for a back-patch.
Abhijit Menon-Sen and Tom Lane
Seems to have been an oversight in the original leakproofness patch.
Per report and patch from Jeevan Chalke.
In passing, prettify some awkward leakproof-related code in AlterFunction.
Commit 9b74f32cdb did this for objects of
type jbvBinary, but in trying further to simplify some of the new jsonb
code I discovered that objects of type jbvObject or jbvArray passed as
WJB_ELEM or WJB_VALUE also caused problems. These too are now added
component by component.
Backpatch to 9.4.
brin_form_tuple calculated an exact tuple size, then palloc'd and
filled just that much. Later, brin_doinsert or brin_doupdate would
MAXALIGN the tuple size and tell PageAddItem that that was the size
of the tuple to insert. If the original tuple size wasn't a multiple
of MAXALIGN, the net result would be that PageAddItem would memcpy
a few more bytes than the palloc request had been for.
AFAICS, this is totally harmless in the real world: the error is a
read overrun not a write overrun, and palloc would certainly have
rounded the request up to a MAXALIGN multiple internally, so there's
no chance of the memcpy fetching off the end of memory. Valgrind,
however, is picky to the byte level not the MAXALIGN level.
Fix it by pushing the MAXALIGN step back to brin_form_tuple. (The other
possible source of tuples in this code, brin_form_placeholder_tuple,
was already producing a MAXALIGN'd result.)
In passing, be a bit more paranoid about internal allocations in
brin_form_tuple.
Multixact truncation is now handled differently, and this file hadn't
gotten the memo.
Per note from Amit Langote. I didn't use his patch, though.
Also update the description of infomask bits, which weren't completely up
to date either. This commit also propagates b01a4f6838 back to 9.3 and
9.4, which apparently I failed to do back then.
Some of this is made possible by commit
9b74f32cdb which lets pushJsonbValue
handle binary Jsonb values, meaning that clients no longer have to, and
some is just doing things in simpler and more straightforward ways.
Fix some places where pgindent did silly stuff, often because project
style wasn't followed to begin with. (I've not touched the atomics
headers, though.)
The name objectType is widely used as a field name, and it's pure luck that
this conflict has not caused pgindent to go crazy before. It messed up
pg_audit.c pretty good though. Since pg_shdepend.c doesn't export this
typedef and only uses it in three places, changing that seems saner than
changing the field usages.
Back-patch because we're contemplating using the union of all branch
typedefs for future pgindent runs, so this won't fix anything if it
stays the same in back branches.
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
Typo in commit 7cbee7c0a. No practical effect since the buffer should
never actually be overrun, but various compilers and static analyzers will
whine about it.
Petr Jelinek
Fix confusion in documentation, substantial memory leakage if float8 or
float4 are pass-by-reference, and assorted comments that were obsoleted
by commit 98edd617f3.
