The scripts in contrib/start-scripts/osx don't work at all on macOS
10.10 (Yosemite) or later, because they depend on SystemStarter which
Apple deprecated long ago and removed in 10.10. Add a new subdirectory
contrib/start-scripts/macos with scripts that use the newer launchd
infrastructure.
Since this problem is independent of which Postgres version you're using,
back-patch to all supported branches.
Discussion: https://postgr.es/m/31338.1510763554@sss.pgh.pa.us
Our initial work with int128 neglected alignment considerations, an
oversight that came back to bite us in bug #14897 from Vincent Lachenal.
It is unsurprising that int128 might have a 16-byte alignment requirement;
what's slightly more surprising is that even notoriously lax Intel chips
sometimes enforce that.
Raising MAXALIGN seems out of the question: the costs in wasted disk and
memory space would be significant, and there would also be an on-disk
compatibility break. Nor does it seem very practical to try to allow some
data structures to have more-than-MAXALIGN alignment requirement, as we'd
have to push knowledge of that throughout various code that copies data
structures around.
The only way out of the box is to make type int128 conform to the system's
alignment assumptions. Fortunately, gcc supports that via its
__attribute__(aligned()) pragma; and since we don't currently support
int128 on non-gcc-workalike compilers, we shouldn't be losing any platform
support this way.
Although we could have just done pg_attribute_aligned(MAXIMUM_ALIGNOF) and
called it a day, I did a little bit of extra work to make the code more
portable than that: it will also support int128 on compilers without
__attribute__(aligned()), if the native alignment of their 128-bit-int
type is no more than that of int64.
Add a regression test case that exercises the one known instance of the
problem, in parallel aggregation over a bigint column.
Back-patch of commit 751804998. The code known to be affected only exists
in 9.6 and later, but we do have some stuff using int128 in 9.5, so patch
back to 9.5.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Generalize section 1 to handle stuff that is principally about the
compiler (not libraries), such as attributes, and collect stuff there
that had been dropped into various other parts of c.h. Also, push
all the gettext macros into section 8, so that section 0 is really
just inclusions rather than inclusions and random other stuff.
The primary goal here is to get pg_attribute_aligned() defined before
section 3, so that we can use it with int128. But this seems like good
cleanup anyway.
This patch just moves macro definitions around, and shouldn't result
in any changes in generated code.
Back-patch of commit 91aec93e6.
Discussion: https://postgr.es/m/20171110185747.31519.28038@wrigleys.postgresql.org
Apart from calling write_stderr() on failure, the handler depends on no
PostgreSQL facilities. We have experienced crashes before reaching the
former call site. Given such an early crash, this change cannot hurt
and may produce a helpful dump. Absent an early crash, this change has
no effect. Back-patch to 9.3 (all supported versions).
Takayuki Tsunakawa
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F80CD13@G01JPEXMBYT05
PostgreSQL running as a Windows service crashed upon calling
write_stderr() before MemoryContextInit(). This fix completes work
started in 5735efee15. Messages this
early contain only ASCII bytes; if we removed the CurrentMemoryContext
requirement, the ensuing conversions would have no effect. Back-patch
to 9.3 (all supported versions).
Takayuki Tsunakawa, reviewed by Michael Paquier.
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F80CC73@G01JPEXMBYT05
This suite had been a proper superset of the regular ecpg test suite,
but the three newest tests didn't reach it. To make this less likely to
recur, delete the extra schedule file and pass the TCP-specific test on
the command line. Back-patch to 9.3 (all supported versions).
Since commit 868898739a, it has assumed
"localhost" resolves to both ::1 and 127.0.0.1. We gain nothing from
that assumption, and it does not hold in a default installation of Red
Hat Enterprise Linux 5. Back-patch to 9.3 (all supported versions).
When a value contained an XML declaration naming some other encoding,
this function interpreted UTF8 bytes as the named encoding, yielding
mojibake. xml_parse() already has similar logic. This would be
necessary but not sufficient for non-UTF8 databases, so preserve
behavior there until the xpath facility can support such databases
comprehensively. Back-patch to 9.3 (all supported versions).
Pavel Stehule and Noah Misch
Discussion: https://postgr.es/m/CAFj8pRC-dM=tT=QkGi+Achkm+gwPmjyOayGuUfXVumCxkDgYWg@mail.gmail.com
An LDAP URL without a host name such as "ldap://" or without a base DN
such as "ldap://localhost" would cause a crash when reading pg_hba.conf.
If no binddn is configured, an error message might end up trying to print a
null pointer, which could crash on some platforms.
Author: Thomas Munro <thomas.munro@enterprisedb.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Upon further review, our Bonjour code doesn't actually work with the
Avahi not-too-compatible compatibility library. While you can get it
to work on non-macOS platforms if you link to Apple's own mDNSResponder
code, there don't seem to be many people who care about that. Leaving in
the AC_SEARCH_LIBS call seems more likely to encourage people to build
broken configurations than to do anything very useful.
Hence, remove the AC_SEARCH_LIBS call and put in a warning comment instead.
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
On macOS the relevant functions require no special library, but elsewhere
we need to pull in libdns_sd.
Back-patch to supported branches. No docs change since the docs do not
suggest that this is a Mac-only feature.
Luke Lonergan
Discussion: https://postgr.es/m/2D8331C5-D64F-44C1-8717-63EDC6EAF7EB@brightforge.com
The point of having separate ResourceOwnerEnlargeFoo and
ResourceOwnerRememberFoo functions is so that resource allocation
can happen in between. Doing it in some other order is just wrong.
OpenTemporaryFile() did open(), enlarge, remember, which would leak the
open file if the enlarge step ran out of memory. Because fd.c has its own
layer of resource-remembering, the consequences look like they'd be limited
to an intratransaction FD leak, but it's still not good.
IncrBufferRefCount() did enlarge, remember, incr-refcount, which would blow
up if the incr-refcount step ever failed. It was safe enough when written,
but since the introduction of PrivateRefCountHash, I think the assumption
that no error could happen there is pretty shaky.
The odds of real problems from either bug are probably small, but still,
back-patch to supported branches.
Thomas Munro and Tom Lane, per a comment from Andres Freund
isdigit(), isspace(), etc are likely to give surprising results if passed a
signed char. We should always cast the argument to unsigned char to avoid
that. Error in commit 63d6b97fd, found by buildfarm member gaur.
Back-patch to 9.3, like that commit.
json{b}_populate_recordset() used the tuple descriptor created from the
query-level AS clause without worrying about whether it matched the actual
input record type. If it didn't, that would usually result in a crash,
though disclosure of server memory contents seems possible as well, for a
skilled attacker capable of issuing crafted SQL commands. Instead, use
the query-supplied descriptor only when there is no input tuple to look at,
and otherwise get a tuple descriptor based on the input tuple's own type
marking. The core code will detect any type mismatch in the latter case.
Michael Paquier and Tom Lane, per a report from David Rowley.
Back-patch to 9.3 where this functionality was introduced.
Security: CVE-2017-15098
By default, $PGUSER has permission to unlink $PGLOG. If $PGUSER
replaces $PGLOG with a symbolic link, the server will corrupt the
link-targeted file by appending log messages. Since these scripts open
$PGLOG as root, the attack works regardless of target file ownership.
"make install" does not install these scripts anywhere. Users having
manually installed them in the past should repeat that process to
acquire this fix. Most script users have $PGLOG writable to root only,
located in $PGDATA. Just before updating one of these scripts, such
users should rename $PGLOG to $PGLOG.old. The script will then recreate
$PGLOG with proper ownership.
Reviewed by Peter Eisentraut. Reported by Antoine Scemama.
Security: CVE-2017-12172
The update path of an INSERT ... ON CONFLICT DO UPDATE requires SELECT
permission on the columns of the arbiter index, but it failed to check
for that in the case of an arbiter specified by constraint name.
In addition, for a table with row level security enabled, it failed to
check updated rows against the table's SELECT policies when the update
path was taken (regardless of how the arbiter index was specified).
Backpatch to 9.5 where ON CONFLICT DO UPDATE and RLS were introduced.
Security: CVE-2017-15099
Makefile.global assigns this prerequisite to every target named "check",
but similar targets must mention it explicitly. Affected targets
failed, tested $PATH binaries, or tested a stale temporary installation.
The src/test/modules examples worked properly when called as "make -C
src/test/modules/$FOO check", but "make -j" allowed the test to start
before the temporary installation was in place. Back-patch to 9.5,
where commit dcae5facca introduced the
shared temp-install.
In the v10 branch, also back-patch the effects of 1ff01b390 and c29c57890
on these files, to reduce future maintenance issues. (I'd do it further
back, except that the 9.X branches differ anyway due to xlog-to-wal
link tag renaming.)
If a process is extending a table concurrently with some BRIN
summarization process, it is possible for the latter to miss pages added
by the former because the number of pages is computed ahead of time.
Fix by determining a fresh relation size after inserting the placeholder
tuple: any process that further extends the table concurrently will
update the placeholder tuple, while previous pages will be processed by
the heap scan.
Reported-by: Tomas Vondra
Reviewed-by: Tom Lane
Author: Álvaro Herrera
Discussion: https://postgr.es/m/083d996a-4a8a-0e13-800a-851dd09ad8cc@2ndquadrant.com
Backpatch-to: 9.5
In some cases the BRIN code releases lock on an index page, and later
re-acquires lock and tries to check that the tuple it was working on is
still there. That check was a couple bricks shy of a load. It didn't
consider that the page might have turned into a "revmap" page. (The
samepage code path doesn't call brin_getinsertbuffer(), so it isn't
protected by the checks for revmap status there.) It also didn't check
whether the tuple offset was now off the end of the linepointer array.
Since commit 24992c6db the latter case is pretty common, but at least
in principle it could have occurred before that. The net result is
that concurrent updates of a BRIN index could fail with errors like
"invalid index offnum" or "inconsistent range map".
Per report from Tomas Vondra. Back-patch to 9.5, since this code is
substantially the same in all versions containing BRIN.
Discussion: https://postgr.es/m/10d2b9f9-f427-03b8-8ad9-6af4ecacbee9@2ndquadrant.com
It turns out we misdiagnosed what the real problem was. Revert the
previous changes, because they may have worse consequences going
forward. A better fix is forthcoming.
The simplistic test case is kept, though disabled.
Discussion: https://postgr.es/m/20171102112019.33wb7g5wp4zpjelu@alap3.anarazel.de
A candidate path needs to be canonicalized before being checked against
the mappings, because the mappings are also canonicalized. This is
especially relevant on Windows
Reported-by: nb <nbedxp@gmail.com>
Author: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Commit d5b760ecb wasn't quite right, on second thought: if the
caller didn't ask for column names then it would happily emit
more Vars than if the caller did ask for column names. This
is surely not a good idea. Advance the aliasp_item whether or
not we're preparing a colnames list.
expandRTE() supposed that an RTE_SUBQUERY subquery must have exactly
as many non-junk tlist items as the RTE has column aliases for it.
This was true at the time the code was written, and is still true so
far as parse analysis is concerned --- but when the function is used
during planning, the subquery might have appeared through insertion
of a view that now has more columns than it did when the outer query
was parsed. This results in a core dump if, for instance, we have
to expand a whole-row Var that references the subquery.
To avoid crashing, we can either stop expanding the RTE when we run
out of aliases, or invent new aliases for the added columns. While
the latter might be more useful, the former is consistent with what
expandRTE() does for composite-returning functions in the RTE_FUNCTION
case, so it seems like we'd better do it that way.
Per bug #14876 from Samuel Horwitz. This has been busted since commit
ff1ea2173 allowed views to acquire more columns, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/20171026184035.1471.82810@wrigleys.postgresql.org
On closer investigation, commits f3ea3e3e8 et al were a few bricks
shy of a load. What we need is not so much to lock down the result
type of a FieldSelect, as to lock down the existence of the column
it's trying to extract. Otherwise, we can break it by dropping that
column. The dependency on the result type is then held indirectly
through the column, and doesn't need to be recorded explicitly.
Out of paranoia, I left in the code to record a dependency on the
result type, but it's used only if we can't identify the pg_class OID
for the column. That shouldn't ever happen right now, AFAICS, but
it seems possible that in future the input node could be marked as
being of type RECORD rather than some specific composite type.
Likewise for FieldStore.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/22571.1509064146@sss.pgh.pa.us
There have been numerous buildfarm failures but the diagnostic is
currently silent about the reason for failure to open the file. Let's
see if we can get to the bottom of it.
Backpatch to all live branches.
Some people like to run libpq-using applications in environments where
there's no home directory. We've broken that scenario before (cf commits
5b4067798 and bd58d9d88), and commit ba005f193 broke it again, by making
it a hard error if we fail to get the home directory name while looking
for ~/.pgpass. The previous precedent is that if we can't get the home
directory name, we should just silently act as though the file we hoped
to find there doesn't exist. Rearrange the new code to honor that.
Looking around, the service-file code added by commit 41a4e4595 had the
same disease. Apparently, that escaped notice because it only runs when
a service name has been specified, which I guess the people who use this
scenario don't do. Nonetheless, it's wrong too, so fix that case as well.
Add a comment about this policy to pqGetHomeDirectory, in the probably
vain hope of forestalling the same error in future. And upgrade the
rather miserable commenting in parseServiceInfo, too.
In passing, also back off parseServiceInfo's assumption that only ENOENT
is an ignorable error from stat() when checking a service file. We would
need to ignore at least ENOTDIR as well (cf 5b4067798), and seeing that
the far-better-tested code for ~/.pgpass treats all stat() failures alike,
I think this code ought to as well.
Per bug #14872 from Dan Watson. Back-patch the .pgpass change to v10
where ba005f193 came in. The service-file bugs are far older, so
back-patch the other changes to all supported branches.
Discussion: https://postgr.es/m/20171025200457.1471.34504@wrigleys.postgresql.org
json_build_object and json_build_array and the jsonb equivalents did not
correctly process explicit VARIADIC arguments. They are modified to use
the new extract_variadic_args() utility function which abstracts away
the details of the call method.
Michael Paquier, reviewed by Tom Lane and Dmitry Dolgov.
Backpatch to 9.5 for the jsonb fixes and 9.4 for the json fixes, as
that's where they originated.
This is epecially useful in the case or "VARIADIC ANY" functions. The
caller can get the artguments and types regardless of whether or not and
explicit VARIADIC array argument has been used. The function also
provides an option to convert arguments on type "unknown" to to "text".
Michael Paquier and me, reviewed by Tom Lane.
Backpatch to 9.4 in order to support the following json bug fix.
DST law changes in Fiji, Namibia, Northern Cyprus, Sudan, Tonga,
and Turks & Caicos Islands. Historical corrections for Alaska, Apia,
Burma, Calcutta, Detroit, Ireland, Namibia, and Pago Pago.
This is a trivial update containing only cosmetic changes. The point
is just to get back to being synced with an official release of tzcode,
rather than some ad-hoc point in their commit history, which is where
commit 47f849a3c left it.
find_expr_references() neglected to record a dependency on the result type
of a FieldSelect node, allowing a DROP TYPE to break a view or rule that
contains such an expression. I think we'd omitted this case intentionally,
reasoning that there would always be a related dependency ensuring that the
DROP would cascade to the view. But at least with nested field selection
expressions, that's not true, as shown in bug #14867 from Mansur Galiev.
Add the dependency, and for good measure a dependency on the node's exposed
collation.
Likewise add a dependency on the result type of a FieldStore. I think here
the reasoning was that it'd only appear within an assignment to a field,
and the dependency on the field's column would be enough ... but having
seen this example, I think that's wrong for nested-composites cases.
Looking at nearby code, I notice we're not recording a dependency on the
exposed collation of CoerceViaIO, which seems inconsistent with our choices
for related node types. Maybe that's OK but I'm feeling suspicious of this
code today, so let's add that; it certainly can't hurt.
This patch does not do anything to protect already-existing views, only
views created after it's installed. But seeing that the issue has been
there a very long time and nobody noticed till now, that's probably good
enough.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20171023150118.1477.19174@wrigleys.postgresql.org
Like the similar logic for arrays and records, it's necessary to examine
the range's subtype to decide whether the range type can support hashing.
We can omit checking the subtype for btree-defined operations, though,
since range subtypes are required to have those operations. (Possibly
that simplification for btree cases led us to overlook that it does
not apply for hash cases.)
This is only an issue if the subtype lacks hash support, which is not
true of any built-in range type, but it's easy to demonstrate a problem
with a range type over, eg, money: you can get a "could not identify
a hash function" failure when the planner is misled into thinking that
hash join or aggregation would work.
This was born broken, so back-patch to all supported branches.
This back-patches the v10-cycle commit 1e5a5d03d into 9.3 - 9.6.
I had noticed at the time that that was fixing a bug, namely that
next_token() might advance *lineptr past the line-terminating '\0',
but given the lack of field complaints I too easily convinced myself
that the problem was only latent. It's not, because tokenize_file()
decides whether there's more on the line using "strlen(lineptr)".
The bug is indeed latent on a newline-terminated line, because then
the newline-stripping bit in tokenize_file() means we'll have two
or more consecutive '\0's in the buffer, masking the fact that we
accidentally advanced over the first one. But the last line in
the file might not be null-terminated, allowing the loop to see
and process garbage, as reported by Mark Jones in bug #14859.
The bug doesn't exist in <= 9.2; there next_token() is reading directly
from a file, and termination of the outer loop relies on an feof() test
not a buffer pointer check. Probably commit 7f49a67f9 can be blamed
for this bug, but I didn't track it down exactly.
Commit 1e5a5d03d does a bit more than the minimum needed to fix the
bug, but I felt the rest of it was good cleanup, so applying it all.
Discussion: https://postgr.es/m/20171017141814.8203.27280@wrigleys.postgresql.org
The GRANT reference page, which lists the default privileges for new
objects, failed to mention that USAGE is granted by default for data
types and domains. As a lesser sin, it also did not specify anything
about the initial privileges for sequences, FDWs, foreign servers,
or large objects. Fix that, and add a comment to acldefault() in the
probably vain hope of getting people to maintain this list in future.
Noted by Laurenz Albe, though I editorialized on the wording a bit.
Back-patch to all supported branches, since they all have this behavior.
Discussion: https://postgr.es/m/1507620895.4152.1.camel@cybertec.at
