When an UPDATE trigger referencing a new table and a DELETE trigger
referencing an old table are both present, MakeTransitionCaptureState()
returns an inconsistent result for UPDATE commands in its set of flags
and tuplestores holding the TransitionCaptureState for transition
tables.
As proved by the test added here, this issue causes a crash in v14 and
earlier versions (down to 11, actually, older versions do not support
triggers on partitioned tables) during cross-partition updates on a
partitioned table. v15 and newer versions are safe thanks to
7103ebb7aa.
This commit fixes the function so that it returns a consistent state
by using portions of the changes made in commit 7103ebb7aa for v13 and
v14. v15 and newer versions are slightly tweaked to match with the
older versions, mainly for consistency across branches.
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20250207.150238.968446820828052276.horikyota.ntt@gmail.com
Backpatch-through: 13
Follow locking behavior of ANALYZE when importing statistics. In
particular, when importing index statistics, the table must be locked
in ShareUpdateExclusive mode. Fixes bug reportd by Jian He.
ANALYZE doesn't update statistics on partitioned indexes, and the
locking requirements are slightly different for in-place updates on
partitioned indexes versus normal indexes. To be conservative, lock
both the partitioned table and the partitioned index in
ShareUpdateExclusive mode when importing stats for a partitioned
index.
Author: Corey Huinker
Reported-by: Jian He
Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CACJufxGreTY7qsCV8%2BBkuv0p5SXGTScgh%3DD%2BDq6%3D%2B_%3DXTp7FWg%40mail.gmail.com
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <noah@leadboat.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 13
Security: CVE-2025-1094
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
This commit introduces changes to track unpruned relations explicitly,
making it possible for top-level plan nodes, such as ModifyTable and
LockRows, to avoid processing partitions pruned during initial
pruning. Scan-level nodes, such as Append and MergeAppend, already
avoid the unnecessary processing by accessing partition pruning
results directly via part_prune_index. In contrast, top-level nodes
cannot access pruning results directly and need to determine which
partitions remain unpruned.
To address this, this commit introduces a new bitmapset field,
es_unpruned_relids, which the executor uses to track the set of
unpruned relations. This field is referenced during plan
initialization to skip initializing certain nodes for pruned
partitions. It is initialized with PlannedStmt.unprunableRelids,
a new field that the planner populates with RT indexes of relations
that cannot be pruned during runtime pruning. These include relations
not subject to partition pruning and those required for execution
regardless of pruning.
PlannedStmt.unprunableRelids is computed during set_plan_refs() by
removing the RT indexes of runtime-prunable relations, identified
from PartitionPruneInfos, from the full set of relation RT indexes.
ExecDoInitialPruning() then updates es_unpruned_relids by adding
partitions that survive initial pruning.
To support this, PartitionedRelPruneInfo and PartitionedRelPruningData
now include a leafpart_rti_map[] array that maps partition indexes to
their corresponding RT indexes. The former is used in set_plan_refs()
when constructing unprunableRelids, while the latter is used in
ExecDoInitialPruning() to convert partition indexes returned by
get_matching_partitions() into RT indexes, which are then added to
es_unpruned_relids.
These changes make it possible for ModifyTable and LockRows nodes to
process only relations that remain unpruned after initial pruning.
ExecInitModifyTable() trims lists, such as resultRelations,
withCheckOptionLists, returningLists, and updateColnosLists, to
consider only unpruned partitions. It also creates ResultRelInfo
structs only for these partitions. Similarly, child RowMarks for
pruned relations are skipped.
By avoiding unnecessary initialization of structures for pruned
partitions, these changes improve the performance of updates and
deletes on partitioned tables during initial runtime pruning.
Due to ExecInitModifyTable() changes as described above, EXPLAIN on a
plan for UPDATE and DELETE that uses runtime initial pruning no longer
lists partitions pruned during initial pruning.
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Discussion: https://postgr.es/m/CA+HiwqFGkMSge6TgC9KQzde0ohpAycLQuV7ooitEEpbKB0O_mg@mail.gmail.com
Three tests in the main regression test suite are proving to not be
portable across multiple runs on a deployed cluster as stats of
pg_stat_io are reset. Problems happen for tests on:
- Writes of WAL in the init context, when creating a WAL segment.
- Syncs of WAL in the init context, when creating a WAL segment.
- Reads of WAL in the normal context, requiring a WAL record to be read.
For a `make check`, this could rely on the checkpoint record read by the
startup process when starting the cluster, something that is not going
to work for a deployed node.
Two of the three tests are moved to the recovery TAP test
029_stats_restart, where we already check the consistency of stats
data. The test for syncs is dropped as TAP can run with fsync=off. The
other two are checked with some data from a freshly-initialized cluster.
Per discussion with Tom Lane, Bertrand Drouvot and Nazir Bilal Yavuz.
Discussion: https://postgr.es/m/915687.1738780322@sss.pgh.pa.us
This didn't actually work: the COPY succeeds, but the FREEZE
optimization isn't applied. There doesn't seem to be an easy way
to support FREEZE on foreign tables, so let's follow the precedent
established by commit 5c9a5513a3 by raising an error early. This
is arguably a bug fix, but due to the lack of reports, the minimal
discussion on the mailing list, and the potential to break existing
scripts, I am not back-patching it for now.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Zhang Mingli <zmlpostgres@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0ujeNgKpE3OrLtR%3DeJGa5LkGMekFzQTwjgw%3DrzaLufQLQ%40mail.gmail.com
This commit allows transformation of OR-clauses into SAOP's for index scans
within nested loop joins. That required the following changes.
1. Make match_orclause_to_indexcol() and group_similar_or_args() understand
const-ness in the same way as match_opclause_to_indexcol(). This
generally makes our approach more uniform.
2. Make match_join_clauses_to_index() pass OR-clauses to
match_clause_to_index().
3. Also switch match_join_clauses_to_index() to use list_append_unique_ptr()
for adding clauses to *joinorclauses. That avoids possible duplicates
when processing the same clauses with different indexes. Previously such
duplicates were elimited in match_clause_to_index(), but now
group_similar_or_args() each time generates distinct copies of grouped
OR clauses.
Discussion: https://postgr.es/m/CAPpHfdv%2BjtNwofg-p5z86jLYZUTt6tR17Wy00ta0dL%3DwHQN3ZA%40mail.gmail.com
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Alena Rybakina <a.rybakina@postgrespro.ru>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
This commit adds WAL IO stats to both pg_stat_io view and per-backend IO
statistics (pg_stat_get_backend_io()). This change is possible since
f92c854cf4, as WAL IO is not counted in blocks in some code paths
where its stats data is measured (like WAL read in xlogreader.c).
IOContext gains IOCONTEXT_INIT and IOObject IOOBJECT_WAL, with the
following combinations allowed:
- IOOBJECT_WAL/IOCONTEXT_NORMAL is used to track I/O operations done on
already-created WAL segments.
- IOOBJECT_WAL/IOCONTEXT_INIT is used for tracking I/O operations done
when initializing WAL segments.
The core changes are done in pg_stat_io.c, backend statistics inherit
them. Backend statistics and pg_stat_io are now available for the WAL
writer, the WAL receiver and the WAL summarizer processes.
I/O timing data is controlled by the GUC track_io_timing, like the
existing data of pg_stat_io for consistency. The timings related to
IOOBJECT_WAL show up if the GUC is enabled (disabled by default).
Bump pgstats file version, due to the additions in IOObject and
IOContext, impacting the amount of data written for the fixed-numbered
IO stats kind in the pgstats file.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Nitin Jadhav, Amit Kapila, Michael
Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
The following functions were not covered by any tests:
- abbrev(inet)
- set_masklen(cidr)
- set_masklen(inet)
- netmask(inet)
- hostmask(inet)
While on it, this improves the output of some of the existing queries in
the test inet to use better aliases.
Author: Aleksander Alekseev
Reviewed-by: Jacob Champion, Keisuke Kuroda, Tom Lane
Discussion: https://postgr.es/m/CAJ7c6TOyZ9bGNrDK6Z3Q0gr9ow8ZpOm+=+01mpE0dsdH4C+u9A@mail.gmail.com
For commit b663b9436e I thought this was useless, but turns out not to
be for the case where a partitioned table has two identical foreign key
constraints which can both be matched by the same constraint in a
partition during attach. This CCI makes the match search for the second
constraint in the parent ignore the constraint in the child that has
already been matched by the first constraint in the parent.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/c599253c-1ccd-4161-80fc-c9065e037a09@gmail.com
Useful for caseless matching. Similar to LOWER(), but avoids edge-case
problems with using LOWER() for caseless matching.
For collations that support it, CASEFOLD() handles characters with
more than two case variations or multi-character case variations. Some
characters may fold to uppercase. The results of case folding are also
more stable across Unicode versions than LOWER() or UPPER().
Discussion: https://postgr.es/m/a1886ddfcd8f60cb3e905c93009b646b4cfb74c5.camel%40j-davis.com
Reviewed-by: Ian Lawrence Barwick
Formerly, these cases threw an error "cannot cast jsonb null to type
<whatever>". That seems less than helpful though. It's also
inconsistent with the behavior of the ->> operator, which translates
JSON null to SQL NULL, as do some other jsonb functions.
Discussion: https://postgr.es/m/3851203.1722552717@sss.pgh.pa.us
With deferred triggers, it is possible that the current role changes
between the time when the trigger is queued and the time it is
executed (for example, the triggering data modification could have
been executed in a SECURITY DEFINER function).
Up to now, deferred trigger functions would run with the current role
set to whatever was active at commit time. That does not matter for
foreign-key constraints, whose correctness doesn't depend on the
current role. But for user-written triggers, the current role
certainly can matter.
Hence, fix things so that AFTER triggers are fired under the role
that was active when they were queued, matching the behavior of
BEFORE triggers which would have actually fired at that time.
(If the trigger function is marked SECURITY DEFINER, that of course
overrides this, as it always has.)
This does not create any new security exposure: if you do DML on a
table owned by a hostile user, that user has always had various ways
to exploit your permissions, such as the aforementioned BEFORE
triggers, default expressions, etc. It might remove some security
exposure, because the old behavior could potentially expose some
other role besides the one directly modifying the table.
There was discussion of making a larger change, such as running as
the trigger's owner. However, that would break the common idiom of
capturing the value of CURRENT_USER in a trigger for auditing/logging
purposes. This change will make no difference in the typical scenario
where the current role doesn't change before commit.
Arguably this is a bug fix, but it seems too big a semantic change
to consider for back-patching.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://postgr.es/m/77ee784cf248e842f74588418f55c2931e47bd78.camel@cybertec.at
This feature was intentionally omitted when FKs were first implemented
for partitioned tables, and had been requested a few times; the
usefulness is clear.
Validation can happen for each partition individually, which is useful
to contain the number of locks held and the duration; or it can be
executed for the partitioning hierarchy as a single command, which
validates all child constraints that haven't been validated already.
This is also useful to implement NOT ENFORCED constraints on top.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b96Bp=-ZwihPPtuaNX=SrZ0U6ZsXD3+fgARO0JuKa8v2jQ@mail.gmail.com
In common cases, foreign keys are defined on the toplevel partitioned
table; but if instead one is defined on a partition and references a
partitioned table, and the referencing partition is detached, we would
examine the pg_constraint row on the partition being detached, and fail
to realize that the sub-constraints must be left alone. This causes the
ALTER TABLE DETACH process to fail with
ERROR: could not find ON INSERT check triggers of foreign key constraint NNN
This is similar but not quite the same as what was fixed by
53af9491a0. This bug doesn't affect branches earlier than 15, because
the detach procedure was different there, so we only backpatch down to
15.
Fix by skipping such modifying constraints that are children of other
constraints being detached.
Author: Amul Sul <sulamul@gmail.com>
Diagnosys-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b97GuPh6wQPbxQS-Zpy16Oh+0aMv-w64QcGrLhCOZZ6p+g@mail.gmail.com
If a referenced UPDATE changes the temporal start/end times, shrinking
the span the row is valid, we get a false return from
ri_Check_Pk_Match(), but overlapping references may still be valid, if
their reference didn't overlap with the removed span.
We need to consider what span(s) are still provided in the referenced
table. Instead of returning that from ri_Check_Pk_Match(), we can
just look it up in the main SQL query.
Reported-by: Sam Gabrielsson <sam@movsom.se>
Author: Paul Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
The test table names gtest11s and gtest12s were way originally chosen
to signify "stored", when the idea was to have virtual columns in the
same test file. This is no longer the idea, so this naming is
irrelevant. (The upcoming feature of virtual generated columns will
have a test file that is initially a copy of generated_stored.sql, and
this random difference will be even more annoying then.) Clean this
up by dropping the suffix.
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
The freshly-released 2025a version of tzdata has a refined estimate
for the longitude of Manila, changing their value for LMT in
pre-standardized-timezone days. This changes the output of one of
our test cases. Since we need to be able to run with system tzdata
files that may or may not contain this update, we'd better stop
making that specific test.
I switched it to use Asia/Singapore, which has a roughly similar UTC
offset. That LMT value hasn't changed in tzdb since 2003, so we can
hope that it's well established.
I also noticed that this set of make_timestamptz tests only exercises
zones east of Greenwich, which seems rather sad, and was not the
original intent AFAICS. (We've already changed these tests once
to stabilize their results across tzdata updates, cf 66b737cd9;
it looks like I failed to consider the UTC-offset-sign aspect then.)
To improve that, add a test with Pacific/Honolulu. That LMT offset
is also quite old in tzdb, so we'll cross our fingers that it doesn't
get improved.
Reported-by: Christoph Berg <cb@df7cb.de>
Discussion: https://postgr.es/m/Z46inkznCxesvDEb@msg.df7cb.de
Backpatch-through: 13
The PG_UNICODE_FAST locale uses code point sort order (fast,
memcmp-based) combined with Unicode character semantics. The character
semantics are based on Unicode full case mapping.
Full case mapping can map a single codepoint to multiple codepoints,
such as "ß" uppercasing to "SS". Additionally, it handles
context-sensitive mappings like the "final sigma", and it uses
titlecase mappings such as "Dž" when titlecasing (rather than plain
uppercase mappings).
Importantly, the uppercasing of "ß" as "SS" is specifically mentioned
by the SQL standard. In Postgres, UCS_BASIC uses plain ASCII semantics
for case mapping and pattern matching, so if we changed it to use the
PG_UNICODE_FAST locale, it would offer better compliance with the
standard. For now, though, do not change the behavior of UCS_BASIC.
Discussion: https://postgr.es/m/ddfd67928818f138f51635712529bc5e1d25e4e7.camel@j-davis.com
Discussion: https://postgr.es/m/27bb0e52-801d-4f73-a0a4-02cfdd4a9ada@eisentraut.org
Reviewed-by: Peter Eisentraut, Daniel Verite
Given a qualified refname, refnameNamespaceItem() will search for a
matching namespace item by relation OID, rather than by name. Commit
80feb727c8 broke this by adding additional namespace items for OLD and
NEW in the RETURNING list, which have the same relation OID, causing
ambiguity. Fix this by ignoring these in the search, which is correct
since they don't match the qualified relation name, and so there is no
real ambiguity.
Reported by Richard Guo.
Discussion: https://postgr.es/m/CAMbWs49MBjWYWDROJ8MZ%3DY%2B4UgRQa10wzik1tWrD5yto9eoGXg%40mail.gmail.com
We should run the expression subtrees of PartitionedRelPruneInfo
structs through fix_scan_expr. Failure to do so means that
AlternativeSubPlans within those expressions won't be cleaned up
properly, resulting in "unrecognized node type" errors since v14.
It seems fairly likely that at least some of the other steps done
by fix_scan_expr are important here as well, resulting in as-yet-
undetected bugs. Therefore, I've chosen to back-patch this to
all supported branches including v13, even though the known
symptom doesn't manifest in v13.
Per bug #18778 from Alexander Lakhin.
Discussion: https://postgr.es/m/18778-24cd399df6c806af@postgresql.org
If a time zone abbreviation used in datetime input is defined in
the currently active timezone, use that definition in preference
to looking in the timezone_abbreviations list. That allows us to
correctly handle abbreviations that have different meanings in
different timezones. Also, it eliminates an inconsistency between
datetime input and datetime output: the non-ISO datestyles for
timestamptz have always printed abbreviations taken from the IANA
data, not from timezone_abbreviations. Before this fix, it was
possible to demonstrate cases where casting a timestamp to text
and back fails or changes the value significantly because of that
inconsistency.
While this change removes the ability to override the IANA data about
an abbreviation known in the current zone, it's not clear that there's
any real use-case for doing so. But it is clear that this makes life
a lot easier for dealing with abbreviations that have conflicts across
different time zones.
Also update the pg_timezone_abbrevs view to report abbreviations
that are recognized via the IANA data, and *not* report any
timezone_abbreviations entries that are thereby overridden.
Under the hood, there are now two SRFs, one that pulls the IANA
data and one that pulls timezone_abbreviations entries. They're
combined by logic in the view. This approach was useful for
debugging (since the functions can be called on their own).
While I don't intend to document the functions explicitly,
they might be useful to call directly.
Also improve DecodeTimezoneAbbrev's caching logic so that it can
cache zone abbreviations found in the IANA data. Without that,
this patch would have caused a noticeable degradation of the
runtime of timestamptz_in.
Per report from Aleksander Alekseev and additional investigation.
Discussion: https://postgr.es/m/CAJ7c6TOATjJqvhnYsui0=CO5XFMF4dvTGH+skzB--jNhqSQu5g@mail.gmail.com
This allows the RETURNING list of INSERT/UPDATE/DELETE/MERGE queries
to explicitly return old and new values by using the special aliases
"old" and "new", which are automatically added to the query (if not
already defined) while parsing its RETURNING list, allowing things
like:
RETURNING old.colname, new.colname, ...
RETURNING old.*, new.*
Additionally, a new syntax is supported, allowing the names "old" and
"new" to be changed to user-supplied alias names, e.g.:
RETURNING WITH (OLD AS o, NEW AS n) o.colname, n.colname, ...
This is useful when the names "old" and "new" are already defined,
such as inside trigger functions, allowing backwards compatibility to
be maintained -- the interpretation of any existing queries that
happen to already refer to relations called "old" or "new", or use
those as aliases for other relations, is not changed.
For an INSERT, old values will generally be NULL, and for a DELETE,
new values will generally be NULL, but that may change for an INSERT
with an ON CONFLICT ... DO UPDATE clause, or if a query rewrite rule
changes the command type. Therefore, we put no restrictions on the use
of old and new in any DML queries.
Dean Rasheed, reviewed by Jian He and Jeff Davis.
Discussion: https://postgr.es/m/CAEZATCWx0J0-v=Qjc6gXzR=KtsdvAE7Ow=D=mu50AgOe+pvisQ@mail.gmail.com
This changes commit 7406ab623f in that the gist strategy number
mapping support function is changed to use the CompareType enum as
input, instead of the "well-known" RT*StrategyNumber strategy numbers.
This is a bit cleaner, since you are not dealing with two sets of
strategy numbers. Also, this will enable us to subsume this system
into a more general system of using CompareType to define operator
semantics across index methods.
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
This allows "x" to be appended to any psql list-like meta-command,
forcing its output to be displayed in expanded mode. This improves
readability in cases where the output is very wide. For example,
"\dfx+" (or equivalently "\df+x") will produce a list of functions,
with additional details, in expanded mode.
This works with all \d* meta-commands, plus \l, \z, and \lo_list, with
the one exception that the expanded mode option "x" cannot be appended
to "\d" by itself, since "\dx" already means something else.
Dean Rasheed, reviewed by Greg Sabino Mullane.
Discussion: https://postgr.es/m/CAEZATCVXJk3KsmCncf7PAVbxdDAUDm3QzDgGT7mBYySWikuOYw@mail.gmail.com
This allows users to determine whether particular functions are
leakproof, and whether the underlying functions used by operators and
casts are leakproof. This is useful to determine whether indexes can
be used in queries on security barrier views or tables with row-level
security policies.
Yugo Nagata, reviewed by Erik Wienhold and Dean Rasheed.
Discussion: https://postgr.es/m/20240701220817.483f9b645b95611f8b1f65da%40sranhm.sraoss.co.jp
When deparsing a JsonExpr, variable names in the PASSING clause were
not quoted. However, since they are parsed as ColLabel tokens, some
variable names require double quotes to ensure that they are properly
interpreted. Fix by using quote_identifier() in the deparsing code.
This oversight was limited to the SQL/JSON query functions
JSON_EXISTS(), JSON_QUERY(), and JSON_VALUE().
Back-patch to v17, where these functions were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCXTpAS%3DncfLNTZ7YS6O5puHeLg_SUYAit%2Bcs7wsrd9Msg%40mail.gmail.com
When deparsing an XMLTABLE() expression, XML namespace names were not
quoted. However, since they are parsed as ColLabel tokens, some names
require double quotes to ensure that they are properly interpreted.
Fix by using quote_identifier() in the deparsing code.
Back-patch to all supported versions.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCXTpAS%3DncfLNTZ7YS6O5puHeLg_SUYAit%2Bcs7wsrd9Msg%40mail.gmail.com
This error message stated the privileges required to add a member
to a group even if the user was trying to drop a member:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add members.
Since the required privileges for both operations are the same, we
can fix this by modifying the message to mention both adding and
dropping members:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add or drop members.
Author: ChangAo Chen
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/tencent_FAA0D00E3514AAF0BBB6322542A6094FEF05%40qq.com
Backpatch-through: 16
A named tuplestore is necessarily a transient object, so it makes
no sense to reference one in a persistent object such as a view.
We didn't previously prevent that, with the result that if you
tried you would get some weird failure about how the executor
couldn't find the tuplestore.
We can mechanize a check for this case cheaply by making dependency
extraction complain if it comes across such an RTE. This is a
plausible way of dealing with it since part of the problem is that we
have no way to make a pg_depend representation of a named tuplestore.
Report and fix by Yugo Nagata. Although this is an old problem,
it's a very weird corner case and there have been no reports from
end users. So it seems sufficient to fix it in master.
Discussion: https://postgr.es/m/20240726160714.e74d0db579f2c017e1ca0b7e@sraoss.co.jp
Move nbtree's detection of RowCompare quals that are unsatisfiable due
to having a NULL in their first row element: rather than detecting these
cases at the point where _bt_first builds its insertion scan key, do so
earlier, during preprocessing proper. This brings the RowCompare case
in line every other case involving an unsatisfiable-due-to-NULL qual.
nbtree now consistently detects such unsatisfiable quals -- even when
they happen to involve a key that isn't examined by _bt_first at all.
Affected cases thereby avoid useless full index scans that cannot
possibly return any matching rows.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzmySVXst2hFrOATC-zw1Byg1XC-jYUS314=mzuqsNwk+Q@mail.gmail.com
When looking up statistical data about an expression, we do not need
to concern ourselves with the outer joins that could null the
Vars/PHVs contained in the expression. Accounting for nullingrels in
the expression could cause estimate_num_groups to count the same Var
multiple times if it's marked with different nullingrels. This is
incorrect, and could lead to "ERROR: corrupt MVNDistinct entry" when
searching for multivariate n-distinct.
Furthermore, the nullingrels could prevent us from matching an
expression to expressional index columns or to the expressions in
extended statistics, leading to inaccurate estimates.
To fix, strip out all the nullingrels from the expression before we
look up statistical data about it. There is one ensuing plan change
in the regression tests, but it looks reasonable and does not
compromise its original purpose.
This patch could result in plan changes, but it fixes an actual bug,
so back-patch to v16 where the outer-join-aware-Var infrastructure was
introduced.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-2Z4k+nFTiZe0Qbu5n8juUWenDAtMzi98bAZQtwHx0-w@mail.gmail.com
Commit aac2c9b4fd mandated such locking
and attempted to fulfill that mandate, but it missed REASSIGN OWNED.
Hence, it remained possible to lose VACUUM's inplace update of
datfrozenxid if a REASSIGN OWNED processed that database at the same
time. This didn't affect the other inplace-updated catalog, pg_class.
For pg_class, REASSIGN OWNED calls ATExecChangeOwner() instead of the
generic AlterObjectOwner_internal(), and ATExecChangeOwner() fulfills
the locking mandate.
Like in GRANT, implement this by following the locking protocol for any
catalog subject to the generic AlterObjectOwner_internal(). It would
suffice to do this for IsInplaceUpdateOid() catalogs only. Back-patch
to v13 (all supported versions).
Kirill Reshke. Reported by Alexander Kukushkin.
Discussion: https://postgr.es/m/CAFh8B=mpKjAy4Cuun-HP-f_vRzh2HSvYFG3rhVfYbfEBUhBAGg@mail.gmail.com
Previously, if an infinite value was passed to date_trunc(), then the
same infinite value would always be returned regardless of the field
unit given by the caller. This commit updates the function so that an
error is returned when an invalid unit is passed to date_trunc() with an
infinite value.
This matches the behavior of date_trunc() with a finite value and
date_part() with an infinite value, making the handling of interval,
timestamp and timestamptz more consistent across the board for these two
functions.
Some tests are added to cover all these new failure cases, with an
unsupported unit and infinite values for the three data types. There
were no test cases in core that checked all these patterns up to now.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc4084dGzEJR0_pBZkDuqbPGc5wn7gK_M0XR_kRiCdUJQ@mail.gmail.com
One test added in 9aea73fc61 did not take into account that the
backend may have some fsync even after a checkpoint. Let's relax it to
be more flexible.
Per report from buildfarm member grassquit, via Alexander Lakhin.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/6143ab0a-9e88-4790-8d9d-50ba45657761@gmail.com
Remove the code for inserting flag columns in the inputs of a SetOp.
That was the only reason why there would be resjunk columns in a
set-operations plan tree, so we can get rid of some code that
supported that, too.
Get rid of choose_hashed_setop() in favor of building Paths for
the hashed and sorted alternatives, and letting them fight it out
within add_path().
Remove set_operation_ordered_results_useful(), which was giving wrong
answers due to examining the wrong ancestor node: we need to examine
the immediate SetOperationStmt parent not the topmost node. Instead
make each caller of recurse_set_operations() pass down the relevant
parent node. (This thinko seems to have led only to wasted planning
cycles and possibly-inferior plans, not wrong query answers. Perhaps
we should back-patch it, but I'm not doing so right now.)
Teach generate_nonunion_paths() to consider pre-sorted inputs for
sorted SetOps, rather than always generating a Sort node.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/1850138.1731549611@sss.pgh.pa.us
The original design for set operations involved appending the two
input relations into one and adding a flag column that allows
distinguishing which side each row came from. Then the SetOp node
pries them apart again based on the flag. This is bizarre. The
only apparent reason to do it is that when sorting, we'd only need
one Sort node not two. But since sorting is at least O(N log N),
sorting all the data is actually worse than sorting each side
separately --- plus, we have no chance of taking advantage of
presorted input. On top of that, adding the flag column frequently
requires an additional projection step that adds cycles, and then
the Append node isn't free either. Let's get rid of all of that
and make the SetOp node have two separate children, using the
existing outerPlan/innerPlan infrastructure.
This initial patch re-implements nodeSetop.c and does a bare minimum
of work on the planner side to generate correctly-shaped plans.
In particular, I've tried not to change the cost estimates here,
so that the visible changes in the regression test results will only
involve removal of useless projection steps and not any changes in
whether to use sorted vs hashed mode.
For SORTED mode, we combine successive identical tuples from each
input into groups, and then merge-join the groups. The tuple
comparisons now use SortSupport instead of simple equality, but
the group-formation part should involve roughly the same number of
tuple comparisons as before. The cross-comparisons between left and
right groups probably add to that, but I'm not sure to quantify how
many more comparisons we might need.
For HASHED mode, nodeSetop's logic is almost the same as before,
just refactored into two separate loops instead of one loop that
has an assumption that it will see all the left-hand inputs first.
In both modes, I added early-exit logic to not bother reading the
right-hand relation if the left-hand input is empty, since neither
INTERSECT nor EXCEPT modes can produce any output if the left input
is empty. This could have been done before in the hashed mode, but
not in sorted mode. Sorted mode can also stop as soon as it exhausts
the left input; any remaining right-hand tuples cannot have matches.
Also, this patch adds some infrastructure for detecting whether
child plan nodes all output the same type of tuple table slot.
If they do, the hash table logic can use slightly more efficient
code based on assuming that that's the input slot type it will see.
We'll make use of that infrastructure in other plan node types later.
Patch by me; thanks to Richard Guo and David Rowley for review.
Discussion: https://postgr.es/m/1850138.1731549611@sss.pgh.pa.us
1a0da347a7 replaced Bitmap Table Scan's individual private and
shared iterators with a unified iterator. It neglected, however, to
check if the iterator had already been cleaned up before doing so on
rescan. Add this check both on rescan and end scan to be safe.
Reported-by: Richard Guo
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs48nrhcLY1kcd-u9oD%2B6yiS631F_8Fx8ZGsO-BYDwH%2Bbyw%40mail.gmail.com
This adds a new variable-numbered statistics kind in pgstats, where the
object ID key of the stats entries is based on the proc number of the
backends. This acts as an upper-bound for the number of stats entries
that can exist at once. The entries are created when a backend starts
after authentication succeeds, and are removed when the backend exits,
making the stats entry exist for as long as their backend is up and
running. These are not written to the pgstats file at shutdown (note
that write_to_file is disabled, as a safety measure).
Currently, these stats include only information about the I/O generated
by a backend, using the same layer as pg_stat_io, except that it is now
possible to know how much activity is happening in each backend rather
than an overall aggregate of all the activity. A function called
pg_stat_get_backend_io() is added to access this data depending on the
PID of a backend. The existing structure could be expanded in the
future to add more information about other statistics related to
backends, depending on requirements or ideas.
Auxiliary processes are not included in this set of statistics. These
are less interesting to have than normal backends as they have dedicated
entries in pg_stat_io, and stats kinds of their own.
This commit includes also pg_stat_reset_backend_stats(), function able
to reset all the stats associated to a single backend.
Bump catalog version and PGSTAT_FILE_FORMAT_ID.
Author: Bertrand Drouvot
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, Michael Paquier, Nazir
Bilal Yavuz
Discussion: https://postgr.es/m/ZtXR+CtkEVVE/LHF@ip-10-97-1-34.eu-west-3.compute.internal
If the non-recursive part of a recursive CTE ended up using
TTSOpsBufferHeapTuple as the table slot type, then a duplicate value
could cause an Assert failure in CheckOpSlotCompatibility() when
checking the hash table for the duplicate value. The expected slot type
for the deform step was TTSOpsMinimalTuple so the Assert failed when the
TTSOpsBufferHeapTuple slot was used.
This is a long-standing bug which we likely didn't notice because it
seems much more likely that the non-recursive term would have required
projection and used a TTSOpsVirtual slot, which CheckOpSlotCompatibility
is ok with.
There doesn't seem to be any harm done here other than the Assert
failure. Both TTSOpsMinimalTuple and TTSOpsBufferHeapTuple slot types
require tuple deformation, so the EEOP_*_FETCHSOME ExprState step would
have properly existed in the ExprState.
The solution is to pass NULL for the ExecBuildGroupingEqual's 'lops'
parameter. This means the ExprState's EEOP_*_FETCHSOME step won't
expect a fixed slot type. This makes CheckOpSlotCompatibility() happy as
no checking is performed when the ExprEvalStep is not expecting a fixed
slot type.
Reported-by: Richard Guo
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAMbWs4-8U9q2LAtf8+ghV11zeUReA3AmrYkxzBEv0vKnDxwkKA@mail.gmail.com
Backpatch-through: 13, all supported versions
0f5738202 adjusted the execGrouping.c code so it made use of ExprStates to
generate hash values. That commit made a wrong assumption that the slot
type to pass to ExecBuildHash32FromAttrs() is always &TTSOpsMinimalTuple.
That's not the case as the slot type depends on the slot type passed to
LookupTupleHashEntry(), which for nodeRecursiveunion.c, could be any of
the current slot types.
Here we fix this by adding a new parameter to BuildTupleHashTableExt()
to allow the slot type to be passed in. In the case of nodeSubplan.c
and nodeAgg.c the slot type is always &TTSOpsVirtual, so for both of
those cases, it's beneficial to pass the known slot type as that allows
ExecBuildHash32FromAttrs() to skip adding the tuple deform step to the
resulting ExprState. Another possible fix would have been to have
ExecBuildHash32FromAttrs() set "fetch.kind" to NULL so that
ExecComputeSlotInfo() always determines the EEOP_INNER_FETCHSOME is
required, however, that option isn't favorable as slows down aggregation
and hashed subplan evaluation due to the extra (needless) deform step.
Thanks to Nathan Bossart for bisecting to find the offending commit
based on Paul's report.
Reported-by: Paul Ramsey <pramsey@cleverelephant.ca>
Discussion: https://postgr.es/m/99F064C1-B3EB-4BE7-97D2-D2A0AA487A71@cleverelephant.ca
