Commit 71f4c8c6f7 (which implemented DETACH CONCURRENTLY) added code
to create a separate table constraint when a table is detached
concurrently, identical to the partition constraint, on the theory that
such a constraint was needed in case the optimizer had constructed any
query plans that depended on the constraint being there. However, that
theory was apparently bogus because any such plans would be invalidated.
For hash partitioning, those constraints are problematic, because their
expressions reference the OID of the parent partitioned table, to which
the detached table is no longer related; this causes all sorts of
problems (such as inability of restoring a pg_dump of that table, and
the table no longer working properly if the partitioned table is later
dropped).
We'd like to get rid of all those constraints. In fact, for branch
master, do that -- no longer create any substitute constraints.
However, out of fear that some users might somehow depend on these
constraints for other partitioning strategies, for stable branches
(back to 14, which added DETACH CONCURRENTLY), only do it for hash
partitioning.
(If you repeatedly DETACH CONCURRENTLY and then ATTACH a partition, then
with this constraint addition you don't need to scan the table in the
ATTACH step, which presumably is good. But if users really valued this
feature, they would have requested that it worked for non-concurrent
DETACH also.)
Author: Haiyang Li <mohen.lhy@alibaba-inc.com>
Reported-by: Fei Changhong <feichanghong@qq.com>
Reported-by: Haiyang Li <mohen.lhy@alibaba-inc.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/18371-7fef49f63de13f02@postgresql.org
Discussion: https://postgr.es/m/19070-781326347ade7c57@postgresql.org
An assertion in _bt_killitems expected the scan's currPos state to
contain a valid LSN, saved from when currPos's page was initially read.
The assertion failed to account for the fact that even logged relations
can have leaf pages with an invalid LSN when built with wal_level set to
"minimal". Remove the faulty assertion.
Oversight in commit e6eed40e (though note that the assertion was
backpatched to stable branches before 18 by commit 7c319f54).
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Matthijs van der Vleuten <postgresql@zr40.nl>
Bug: #19082
Discussion: https://postgr.es/m/19082-628e62160dbbc1c1@postgresql.org
Backpatch-through: 13
An error happening while a slot data is saved on disk in
SaveSlotToPath() could cause a state.tmp file (temporary file holding
the slot state data, renamed to its permanent name at the end of the
function) to remain around after it has been created. This temporary
file is created with O_EXCL, meaning that if an existing state.tmp is
found, its creation would fail. This would prevent the slot data to be
saved, requiring a manual intervention to remove state.tmp before being
able to save again a slot. Possible scenarios where this temporary file
could remain on disk is for example a ENOSPC case (no disk space) while
writing, syncing or renaming it. The bug reports point to a write
failure as the principal cause of the problems.
Using O_TRUNC has been argued back in 2019 as a potential solution to
discard any temporary file that could exist. This solution was rejected
as O_EXCL can also act as a safety measure when saving the slot state,
crash recovery offering cleanup guarantees post-crash. This commit uses
the alternative approach that has been suggested by Andres Freund back
in 2019. When the temporary state file cannot be written, synced,
closed or renamed (note: not when created!), an unlink() is used to
remove the temporary state file while holding the in-progress I/O
LWLock, so as any follow-up attempts to save a slot's data would not
choke on an existing file that remained around because of a previous
failure.
This problem has been reported a few times across the years, going back
to 2019, but for some reason I have never come back to do something
about it and it has been forgotten. A recent report has reminded me
that this was still a problem.
Reported-by: Kevin K Biju <kevinkbiju@gmail.com>
Reported-by: Sergei Kornilov <sk@zsrv.org>
Reported-by: Grigory Smolkin <g.smolkin@postgrespro.ru>
Discussion: https://postgr.es/m/CAM45KeHa32soKL_G8Vk38CWvTBeOOXcsxAPAs7Jt7yPRf2mbVA@mail.gmail.com
Discussion: https://postgr.es/m/3559061693910326@qy4q4a6esb2lebnz.sas.yp-c.yandex.net
Discussion: https://postgr.es/m/08bbfab1-a61d-3750-fc18-4ab2c1aa7f09@postgrespro.ru
Backpatch-through: 13
While pgoutput caches relation synchronization information in
RelationSyncCache that resides in CacheMemoryContext, each entry's
information (such as row filter expressions and column lists) is
stored in the entry's private memory context (entry_cxt in
RelationSyncEntry), which is a descendant memory context of the
decoding context. If a logical decoding invoked via SQL functions like
pg_logical_slot_get_binary_changes fails with an error, subsequent
logical decoding executions could access already-freed memory of the
entry's cache, resulting in a crash.
With this change, it's ensured that RelationSyncCache is cleaned up
even in error cases by using a memory context reset callback function.
Backpatch to 15, where entry_cxt was introduced for column filtering
and row filtering.
While the backbranches v13 and v14 have a similar issue where
RelationSyncCache persists even after an error when pgoutput is used
via SQL API, we decided not to backport this fix. This decision was
made because v13 is approaching its final minor release, and we won't
have an chance to fix any new issues that might arise. Additionally,
since using pgoutput via SQL API is not a common use case, the risk
outwights the benefit. If we receive bug reports, we can consider
backporting the fixes then.
Author: vignesh C <vignesh21@gmail.com>
Co-authored-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CALDaNm0x-aCehgt8Bevs2cm=uhmwS28MvbYq1=s2Ekf0aDPkOA@mail.gmail.com
Backpatch-through: 15
SQL/JSON functions such as JSON_VALUE could fail with "unrecognized
node type" errors when a DEFAULT clause contained an explicit COLLATE
expression. That happened because assign_collations_walker() could
invoke exprSetCollation() on a JsonBehavior expression whose DEFAULT
still contained a CollateExpr, which exprSetCollation() does not
handle.
For example:
SELECT JSON_VALUE('{"a":1}', '$.c' RETURNING text
DEFAULT 'A' COLLATE "C" ON EMPTY);
Fix by validating in transformJsonBehavior() that the DEFAULT
expression's collation matches the enclosing JSON expression’s
collation. In exprSetCollation(), replace the recursive call on the
JsonBehavior expression with an assertion that its collation already
matches the target, since the parser now enforces that condition.
Reported-by: Jian He <jian.universality@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CACJufxHVwYYSyiVQ6o+PsRX6zQ7rAFinh_fv1kCfTsT1xG4Zeg@mail.gmail.com
Backpatch-through: 17
On Windows, this code did not handle error conditions correctly at
all, since it looked at "errno" which is not used for socket-related
errors on that platform. This resulted, for example, in failure
to connect to a PostgreSQL server with GSSAPI enabled.
We have a convention for dealing with this within libpq, which is to
use SOCK_ERRNO and SOCK_ERRNO_SET rather than touching errno directly;
but the GSSAPI code is a relative latecomer and did not get that memo.
(The equivalent backend code continues to use errno, because the
backend does this differently. Maybe libpq's approach should be
rethought someday.)
Apparently nobody tries to build libpq with GSSAPI support on Windows,
or we'd have heard about this before, because it's been broken all
along. Back-patch to all supported branches.
Author: Ning Wu <ning94803@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFGqpvg-pRw=cdsUpKYfwY6D3d-m9tw8WMcAEE7HHWfm-oYWvw@mail.gmail.com
Backpatch-through: 13
In similar vein to commit ccc8194e42, a reset instance of a shared
memory TID store happened to occupy the same private memory as the old
one for the entry point, since the chunk freed after the last round
of index vacuuming was put on the context's freelist. The failure
to update the vacrel->dead_items pointer was evident by nudging the
system to allocate memory in a different area. This was not discovered
at the time of the earlier commit since our regression tests didn't
cover multiple index passes with parallel vacuum.
Backpatch to v17, when TidStore came in.
Author: Kevin Oommen Anish <kevin.o@zohocorp.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Tested-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/199a07cbdfc.7a1c4aac25838.1675074408277594551%40zohocorp.com
Backpatch-through: 17
Currently, pgbench aborts when a COPY response is received in
readCommandResponse(). However, as PQgetResult() returns an empty
result when there is no asynchronous result, through getCopyResult(),
the logic done at the end of readCommandResponse() for the error path
leads to an infinite loop.
This commit forcefully exits the COPY state with PQendcopy() before
moving to the error handler when fiding a COPY state, avoiding the
infinite loop. The COPY protocol is not supported by pgbench anyway, as
an error is assumed in this case, so giving up is better than having the
tool be stuck forever. pgbench was interruptible in this state.
A TAP test is added to check that an error happens if trying to use
COPY.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/CAO6_XqpHyF2m73ifV5a=5jhXxH2chk=XrgefY+eWWPe2Eft3=A@mail.gmail.com
Backpatch-through: 13
pgstattuple checks the state of the pages retrieved for gist and hash
using some check functions from each index AM, respectively
gistcheckpage() and _hash_checkpage(). When these are called, they
would fail when bumping on data that is found as incorrect (like opaque
area size not matching, or empty pages), contrary to btree that simply
discards these cases and continues to aggregate data.
Zero pages can happen after a crash, with these AMs being able to do an
internal cleanup when these are seen. Also, sporadic failures are
annoying when doing for example a large-scale diagnostic query based on
pgstattuple with a join of pg_class, as it forces one to use tricks like
quals to discard hash or gist indexes, or use a PL wrapper able to catch
errors.
This commit changes the reports generated for btree, gist and hash to
be more user-friendly;
- When seeing an empty page, report it as free space. This new rule
applies to gist and hash, and already applied to btree.
- For btree, a check based on the size of BTPageOpaqueData is added.
- For gist indexes, gistcheckpage() is not called anymore, replaced by a
check based on the size of GISTPageOpaqueData.
- For hash indexes, instead of _hash_getbuf_with_strategy(), use a
direct call to ReadBufferExtended(), coupled with a check based on
HashPageOpaqueData. The opaque area size check was already used.
- Pages that do not match these criterias are discarded from the stats
reports generated.
There have been a couple of bug reports over the years that complained
about the current behavior for hash and gist, as being not that useful,
with nothing being done about it. Hence this change is backpatched down
to v13.
Reported-by: Noah Misch <noah@leadboat.com>
Author: Nitin Motiani <nitinmotiani@google.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CAH5HC95gT1J3dRYK4qEnaywG8RqjbwDdt04wuj8p39R=HukayA@mail.gmail.com
Backpatch-through: 13
Some macOS machines are having trouble with 002_inline, which executes
the JSON parser test executables hundreds of times in a nested loop.
Both developer machines and buildfarm critters have shown excessive test
durations, upwards of 20 seconds.
Push the innermost loop of 002_inline, which iterates through differing
chunk sizes, down into the test executable. (I'd eventually like to push
all of the JSON unit tests down into C, but this is an easy win in the
short term.) Testers have reported a speedup between 4-9x.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BTgmobKoG%2BgKzH9qB7uE4MFo-z1hn7UngqAe9b0UqNbn3_XGQ%40mail.gmail.com
Backpatch-through: 17
pgbench uses readCommandResponse() to process server responses.
When readCommandResponse() encounters an error during a call to
PQgetResult() to fetch the current result, it attempts to report it
with an additional error message from PQerrorMessage(). However,
previously, this extra error message could be lost or become incorrect.
The cause was that after fetching the current result (and detecting
an error), readCommandResponse() called PQgetResult() again to
peek at the next result. This second call could overwrite the libpq
connection's error message before the original error was reported,
causing the error message retrieved from PQerrorMessage() to be
lost or overwritten.
This commit fixes the issue by updating readCommandResponse()
to use PQresultErrorMessage() instead of PQerrorMessage()
to retrieve the error message generated when the PQgetResult()
for the current result causes an error, ensuring the correct message
is reported.
Backpatch to all supported versions.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20250925110940.ebacc31725758ec47d5432c6@sraoss.co.jp
Backpatch-through: 13
Neighbor get_statistics_object_oid() ignores objects in pg_temp, as has
been the standard for non-relation, non-type namespace searches since
CVE-2007-2138. Hence, most operations that name a statistics object
correctly decline to map an unqualified name to a statistics object in
pg_temp. StatisticsObjIsVisibleExt() did not. Consequently,
pg_statistics_obj_is_visible() wrongly returned true for such objects,
psql \dX wrongly listed them, and getObjectDescription()-based ereport()
and pg_describe_object() wrongly omitted namespace qualification. Any
malfunction beyond that would depend on how a human or application acts
on those wrong indications. Commit
d99d58cdc8 introduced this. Back-patch to
v13 (all supported versions).
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/20250920162116.2e.nmisch@google.com
Backpatch-through: 13
Because we failed to do this, DISTINCT in GROUP BY DISTINCT would be
ignored in PL/pgSQL assignment statements. It's not surprising that
no one noticed, since such statements will throw an error if the query
produces more than one row. That eliminates most scenarios where
advanced forms of GROUP BY could be useful, and indeed makes it hard
even to find a simple test case. Nonetheless it's wrong.
This is directly the fault of be45be9c3 which added the groupDistinct
field, but I think much of the blame has to fall on c9d529848, in
which I incautiously supposed that we'd manage to keep two copies of
a big chunk of parse-analysis logic in sync. As a follow-up, I plan
to refactor so that there's only one copy. But that seems useful
only in master, so let's use this one-line fix for the back branches.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/31027.1758919078@sss.pgh.pa.us
Backpatch-through: 14
When running pgbench with --verbose-errors option and a custom script that
triggered retriable errors (e.g., serialization errors) in pipeline mode,
an assertion failure could occur:
Assertion failed: (sql_script[st->use_file].commands[st->command]->type == 1), function commandError, file pgbench.c, line 3062.
The failure happened because pgbench assumed these errors would only occur
during SQL commands, but in pipeline mode they can also happen during
\endpipeline meta command.
This commit fixes the assertion failure by adjusting the assertion check to
allow such errors during either SQL commands or \endpipeline.
Backpatch to v15, where the assertion check was introduced.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwGWQMOzNkQs-LmpDHdNC0h8dmAuUMRvZrEntQi5a-b=Kg@mail.gmail.com
The functions test_stat_func() and test_stat_func2() had empty
function bodies, so that they took very little time to run. This made
it possible that on machines with relatively low timer resolution the
functions could return before the clock advanced, making the test fail
(as seen on buildfarm members fruitcrow and hamerkop).
To avoid that, pg_sleep for 10us during the functions. As far as we
can tell, all current hardware has clock resolution much less than
that. (The current implementation of pg_sleep will round it up to
1ms anyway, but someday that might get improved.)
Author: Michael Banck <mbanck@gmx.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/68d413a3.a70a0220.24c74c.8be9@mx.google.com
Backpatch-through: 15
Previously, the parallel apply worker used SIGINT to receive a graceful
shutdown signal from the leader apply worker. However, SIGINT is also used
by the LOCK_TIMEOUT handler to trigger a query-cancel interrupt. This
overlap caused the parallel apply worker to miss LOCK_TIMEOUT signals,
leading to incorrect behavior during lock wait/contention.
This patch resolves the conflict by switching the graceful shutdown signal
from SIGINT to SIGUSR2.
Reported-by: Zane Duffield <duffieldzane@gmail.com>
Diagnosed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CACMiCkXyC4au74kvE2g6Y=mCEF8X6r-Ne_ty4r7qWkUjRE4+oQ@mail.gmail.com
Remove stray whitespace in xref tag.
This was found due to a regression in xmllint 2.15.0 which flagged
this as an error, and at the time of this commit no fix for xmllint
has shipped.
Author: Erik Wienhold <ewie@ewie.name>
Discussion: https://postgr.es/m/f4c4661b-4e60-4c10-9336-768b7b55c084@ewie.name
Backpatch-through: 17
Previously, pg_restore did not skip security labels on publications or
subscriptions even when --no-publications or --no-subscriptions was specified.
As a result, it could issue SECURITY LABEL commands for objects that were
never created, causing those commands to fail.
This commit fixes the issue by ensuring that security labels on publications
and subscriptions are also skipped when the corresponding options are used.
Backpatch to all supported versions.
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CACJufxHCt00pR9h51AVu6+yPD5J7JQn=7dQXxqacj0XyDhc-fA@mail.gmail.com
Backpatch-through: 13
If an aggregate function call contains a sub-select that has
an RTE referencing a CTE outside the aggregate, we must treat
that reference like a Var referencing the CTE's query level
for purposes of determining the aggregate's level. Otherwise
we might reach the nonsensical conclusion that the aggregate
should be evaluated at some query level higher than the CTE,
ending in a planner error or a broken plan tree that causes
executor failures.
Bug: #19055
Reported-by: BugForge <dllggyx@outlook.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19055-6970cfa8556a394d@postgresql.org
Backpatch-through: 13
The EvalPlanQual recheck for TID Range Scan wasn't rechecking the TID qual
still passed after following update chains. This could result in tuples
being updated or deleted by plans using TID Range Scans where the ctid of
the new (updated) tuple no longer matches the clause of the scan. This
isn't desired behavior, and isn't consistent with what would happen if the
chosen plan had used an Index or Seq Scan, and that could lead to hard to
predict behavior for scans that contain TID quals and other quals as the
planner has freedom to choose TID Range or some other non-TID scan method
for such queries, and the chosen plan could change at any moment.
Here we fix this by properly implementing the recheck function for TID
Range Scans.
Backpatch to 14, where TID Range Scans were added
Reported-by: Sophie Alpert <pg@sophiebits.com>
Author: Sophie Alpert <pg@sophiebits.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4a6268ff-3340-453a-9bf5-c98d51a6f729@app.fastmail.com
Backpatch-through: 14
The EvalPlanQual recheck for TID Scan wasn't rechecking the TID qual
still passed after following update chains. This could result in tuples
being updated or deleted by plans using TID Scans where the ctid of the
new (updated) tuple no longer matches the clause of the scan. This isn't
desired behavior, and isn't consistent with what would happen if the
chosen plan had used an Index or Seq Scan, and that could lead to hard to
predict behavior for scans that contain TID quals and other quals as the
planner has freedom to choose TID or some other scan method for such
queries, and the chosen plan could change at any moment.
Here we fix this by properly implementing the recheck function for TID
Scans.
Backpatch to 13, oldest supported version
Reported-by: Sophie Alpert <pg@sophiebits.com>
Author: Sophie Alpert <pg@sophiebits.com>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4a6268ff-3340-453a-9bf5-c98d51a6f729@app.fastmail.com
Backpatch-through: 13
The COMMENT should depend on the separately-dumped constraint, not the
domain. Sufficient restore parallelism might fail the COMMENT command
by issuing it before the constraint exists. Back-patch to v13, like
commit 0858f0f96e.
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/20250913020233.fa.nmisch@google.com
Backpatch-through: 13
In our previous discussions around making our regression tests
pass in FIPS mode, we concluded that we didn't need to support
the different error message wording observed with pre-3.0 OpenSSL.
However there are still a few LTS distributions soldiering along
with such versions, and now we have some in the buildfarm.
So let's add the variant expected-files needed to make them happy.
This commit only covers the core regression tests. Previous
discussion suggested that we might need some adjustments in
contrib as well, but it's not totally clear to me what those
would be. Rather than work it out from first principles,
I'll wait to see what the buildfarm shows.
Back-patch to v17 which is the oldest branch that claims
to support this case.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/443709.1757876535@sss.pgh.pa.us
Backpatch-through: 17
JsonConstructorExpr can produce non-NULL output with a NULL input, so
it should be treated as a non-strict construct. Failing to do so can
lead to incorrect query behavior.
For example, in the reported case, when pulling up a subquery that is
under an outer join, if the subquery's target list contains a
JsonConstructorExpr that uses subquery variables and it is mistakenly
treated as strict, it will be pulled up without being wrapped in a
PlaceHolderVar. As a result, the expression will be evaluated at the
wrong place and will not be forced to null when the outer join should
do so.
Back-patch to v16 where JsonConstructorExpr was introduced.
Bug: #19046
Reported-by: Runyuan He <runyuan@berkeley.edu>
Author: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/19046-765b6602b0a8cfdf@postgresql.org
Backpatch-through: 16
Previously, pg_dump incorrectly queried pg_seclabel to retrieve security labels
for subscriptions, which are stored in pg_shseclabel as they are global objects.
This could result in security labels for subscriptions not being dumped.
This commit fixes the issue by updating pg_dump to query the pg_seclabels view,
which aggregates entries from both pg_seclabel and pg_shseclabel.
While querying pg_shseclabel directly for subscriptions was an alternative,
using pg_seclabels is simpler and sufficient.
In addition, pg_dump is updated to dump security labels on event triggers,
which were previously omitted.
Backpatch to all supported versions.
Author: Jian He <jian.universality@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CACJufxHCt00pR9h51AVu6+yPD5J7JQn=7dQXxqacj0XyDhc-fA@mail.gmail.com
Backpatch-through: 13
Previously, pg_restore did not skip comments on publications or subscriptions
even when --no-publications or --no-subscriptions was specified. As a result,
it could issue COMMENT commands for objects that were never created,
causing those commands to fail.
This commit fixes the issue by ensuring that comments on publications and
subscriptions are also skipped when the corresponding options are used.
Backpatch to all supported versions.
Author: Jian He <jian.universality@gmail.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CACJufxHCt00pR9h51AVu6+yPD5J7JQn=7dQXxqacj0XyDhc-fA@mail.gmail.com
Backpatch-through: 13
Commit e3ffc3e91 fixed the translation of character classes in
SIMILAR TO regular expressions. Unfortunately the fix broke a corner
case: if there is an escape character right after the opening bracket
(for example in "[\q]"), a closing bracket right after the escape
sequence would not be seen as closing the character class.
There were two more oversights: a backslash or a nested opening bracket
right at the beginning of a character class should remove the special
meaning from any following caret or closing bracket.
This bug suggests that this code needs to be more readable, so also
rename the variables "charclass_depth" and "charclass_start" to
something more meaningful, rewrite an "if" cascade to be more
consistent, and improve the commentary.
Reported-by: Dominique Devienne <ddevienne@gmail.com>
Reported-by: Stephan Springl <springl-psql@bfw-online.de>
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFCRh-8NwJd0jq6P=R3qhHyqU7hw0BTor3W0SvUcii24et+zAw@mail.gmail.com
Backpatch-through: 13
Commit a0b99fc12 caused pg_event_trigger_dropped_objects()
to not fill the object_name field for schemas, which it
should have; and caused it to fill the object_name field
for default values, which it should not have.
In addition, triggers and RLS policies really should behave
the same way as we're making column defaults do; that is,
they should have is_temporary = true if they belong to a
temporary table.
Fix those things, and upgrade event_trigger.sql's woefully
inadequate test coverage of these secondary output columns.
As before, back-patch only to v15.
Reported-by: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/bd7b4651-1c26-4d30-832b-f942fabcb145@postgrespro.ru
Backpatch-through: 15
Clang 21 shows some new compiler warnings, for example:
warning: variable 'dstsize' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
The fix is to initialize the variables when they are defined. This is
similar to, for example, the existing situation in gistKeyIsEQ().
Discussion: https://www.postgresql.org/message-id/flat/6604ad6e-5934-43ac-8590-15113d6ae4b1%40eisentraut.org
pg_event_trigger_dropped_objects() would report a column default
object with is_temporary = false, even if it belongs to a
temporary table. This seems clearly wrong, so adjust it to
report the table's temp-ness.
While here, refactor EventTriggerSQLDropAddObject to make its
handling of namespace objects less messy and avoid duplication
of the schema-lookup code. And add some explicit test coverage
of dropped-object reports for dependencies of temp tables.
Back-patch to v15. The bug exists further back, but the
GetAttrDefaultColumnAddress function this patch depends on does not,
and it doesn't seem worth adjusting it to cope with the older code.
Author: Antoine Violin <violin.antuan@gmail.com>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFjUV9x3-hv0gihf+CtUc-1it0hh7Skp9iYFhMS7FJjtAeAptA@mail.gmail.com
Backpatch-through: 15
hash_xlog.h included descriptions for the blocks used in WAL records
that were was not completely consistent with how the records are
generated, with one block missing for SQUEEZE_PAGE, and inconsistent
descriptions used for block 0 in VACUUM_ONE_PAGE and MOVE_PAGE_CONTENTS.
This information was incorrect since c11453ce0a, cross-checking the
logic for the record generation.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CALdSSPj1j=a1d1hVA3oabRFz0hSU3KKrYtZPijw4UPUM7LY9zw@mail.gmail.com
Backpatch-through: 13
If the hash functions used for hashing tuples leaked any memory,
we failed to clean that up, resulting in query-lifespan memory
leakage in queries using hashed subplans. One way that could
happen is if the values being hashed require de-toasting, since
most of our hash functions don't trouble to clean up de-toasted
inputs.
Prior to commit bf6c614a2, this leakage was largely masked
because TupleHashTableMatch would reset hashtable->tempcxt
(via execTuplesMatch). But it doesn't do that anymore, and
that's not really the right place for this anyway: doing it
there could reset the tempcxt many times per hash lookup,
or not at all. Instead put reset calls into ExecHashSubPlan
and buildSubPlanHash. Along the way to that, rearrange
ExecHashSubPlan so that there's just one place to call
MemoryContextReset instead of several.
This amounts to accepting the de-facto API spec that the caller
of the TupleHashTable routines is responsible for resetting the
tempcxt adequately often. Although the other callers seem to
get this right, it was not documented anywhere, so add a comment
about it.
Bug: #19040
Reported-by: Haiyang Li <mohen.lhy@alibaba-inc.com>
Author: Haiyang Li <mohen.lhy@alibaba-inc.com>
Reviewed-by: Fei Changhong <feichanghong@qq.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19040-c9b6073ef814f48c@postgresql.org
Backpatch-through: 13
The startup process does not process shared invalidation messages, only
sending them, and never calls AtEOXact_SMgr() which clean up any
unpinned SMgrRelations. Hence, it is never able to free SMgrRelations
on a periodic basis, bloating its hashtable over time.
Like the checkpointer and the bgwriter, this commit takes a conservative
approach by freeing periodically SMgrRelations when replaying a
checkpoint record, either online or shutdown, so as the startup process
has a way to perform a periodic cleanup.
Issue caused by 21d9c3ee4e, so backpatch down to v17.
Author: Jingtang Zhang <mrdrivingduck@gmail.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Discussion: https://postgr.es/m/28C687D4-F335-417E-B06C-6612A0BD5A10@gmail.com
Backpatch-through: 17
A new pgstats entry is created as a two-step process:
- The entry is looked at in the shared hashtable of pgstats, and is
inserted if not found.
- When not found and inserted, its fields are then initialized. This
part include a DSA chunk allocation for the stats data of the new entry.
As currently coded, if the DSA chunk allocation fails due to an
out-of-memory failure, an ERROR is generated, leaving in the pgstats
shared hashtable an inconsistent entry due to the first step, as the
entry has already been inserted in the hashtable. These broken entries
can then be found by other backends, crashing them.
There are only two callers of pgstat_init_entry(), when loading the
pgstats file at startup and when creating a new pgstats entry. This
commit changes pgstat_init_entry() so as we use dsa_allocate_extended()
with DSA_ALLOC_NO_OOM, making it return NULL on allocation failure
instead of failing. This way, a backend failing an entry creation can
take appropriate cleanup actions in the shared hashtable before throwing
an error. Currently, this means removing the entry from the shared
hashtable before throwing the error for the allocation failure.
Out-of-memory errors unlikely happen in the wild, and we do not bother
with back-patches when these are fixed, usually. However, the problem
dealt with here is a degree worse as it breaks the shared memory state
of pgstats, impacting other processes that may look at an inconsistent
entry that a different process has failed to create.
Author: Mikhail Kot <mikhail.kot@databricks.com>
Discussion: https://postgr.es/m/CAAi9E7jELo5_-sBENftnc2E8XhW2PKZJWfTC3i2y-GMQd2bcqQ@mail.gmail.com
Backpatch-through: 15
When executing a MERGE UPDATE action, if there is more than one
concurrent update of the target row, the lock-and-retry code would
sometimes incorrectly identify the latest version of the target tuple,
leading to incorrect results.
This was caused by using the ctid field from the TM_FailureData
returned by table_tuple_lock() in a case where the result was TM_Ok,
which is unsafe because the TM_FailureData struct is not guaranteed to
be fully populated in that case. Instead, it should use the tupleid
passed to (and updated by) table_tuple_lock().
To reduce the chances of similar errors in the future, improve the
commentary for table_tuple_lock() and TM_FailureData to make it
clearer that table_tuple_lock() updates the tid passed to it, and most
fields of TM_FailureData should not be relied on in non-failure cases.
An exception to this is the "traversed" field, which is set in both
success and failure cases.
Reported-by: Dmitry <dsy.075@yandex.ru>
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1570d30e-2b95-4239-b9c3-f7bf2f2f8556@yandex.ru
Backpatch-through: 15
