teaching the latter to accept either RestrictInfo nodes or bare
clause expressions; and cache the selectivity result in the RestrictInfo
node when possible. This extends the caching behavior of approx_selectivity
to many more contexts, and should reduce duplicate selectivity
calculations.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
fields: now they are valid whenever the clause is a binary opclause,
not only when it is a potential join clause (there is a new boolean
field canjoin to signal the latter condition). This lets us avoid
recomputing the relid sets over and over while examining indexes.
Still more work to do to make this as useful as it could be, because
there are places that could use the info but don't have access to the
RestrictInfo node.
about whether it is applied before or after eval_const_expressions().
I believe there were some corner cases where the system would fail to
recognize that a partial index is applicable because of the previous
inconsistency. Store normal rather than 'implicit AND' representations
of constraints and index predicates in the catalogs.
initdb forced due to representation change of constraints/predicates.
sequence every time it's called is bogus --- it interferes with user
control over the seed, and actually decreases randomness overall
(because a seed based on time(NULL) is pretty predictable). If you really
want a reproducible result from geqo, do 'set seed = 0' before planning
a query.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
'scalar op ALL (array)', where the operator is applied between the
lefthand scalar and each element of the array. The operator must
yield boolean; the result of the construct is the OR or AND of the
per-element results, respectively.
Original coding by Joe Conway, after an idea of Peter's. Rewritten
by Tom to keep the implementation strictly separate from subqueries.
some cases of redundant clauses that were formerly not caught. We have
to special-case this because the clauses involved never get attached to
the same join restrictlist and so the existing logic does not notice
that they are redundant.
extensions to support our historical behavior. An aggregate belongs
to the closest query level of any of the variables in its argument,
or the current query level if there are no variables (e.g., COUNT(*)).
The implementation involves adding an agglevelsup field to Aggref,
and treating outer aggregates like outer variables at planning time.
of an index can now be a computed expression instead of a simple variable.
Restrictions on expressions are the same as for predicates (only immutable
functions, no sub-selects). This fixes problems recently introduced with
inlining SQL functions, because the inlining transformation is applied to
both expression trees so the planner can still match them up. Along the
way, improve efficiency of handling index predicates (both predicates and
index expressions are now cached by the relcache) and fix 7.3 oversight
that didn't record dependencies of predicate expressions.
blanks, in hopes of reducing the surprise factor for newbies. Remove
redundant operators for VARCHAR (it depends wholly on TEXT operations now).
Clean up resolution of ambiguous operators/functions to avoid surprising
choices for domains: domains are treated as equivalent to their base types
and binary-coercibility is no longer considered a preference item when
choosing among multiple operators/functions. IsBinaryCoercible now correctly
reflects the notion that you need *only* relabel the type to get from type
A to type B: that is, a domain is binary-coercible to its base type, but
not vice versa. Various marginal cleanup, including merging the essentially
duplicate resolution code in parse_func.c and parse_oper.c. Improve opr_sanity
regression test to understand about binary compatibility (using pg_cast),
and fix a couple of small errors in the catalogs revealed thereby.
Restructure "special operator" handling to fetch operators via index opclasses
rather than hardwiring assumptions about names (cleans up the pattern_ops
stuff a little).
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
the outer query. (The implementation is a bit klugy, but it would take
nontrivial restructuring to make it nicer, which this is probably not
worth.) This avoids unnecessary sort steps in examples like
SELECT foo,count(*) FROM (SELECT ... ORDER BY foo,bar) sub GROUP BY foo
which means there is now a reasonable technique for controlling the
order of inputs to custom aggregates, even in the grouping case.
locParam lists can be converted to bitmapsets to speed updating. Also,
replace 'locParam' with 'allParam', which contains all the paramIDs
relevant to the node (i.e., the union of extParam and locParam); this
saves a step during SetChangedParamList() without costing anything
elsewhere.
nodes where it's not really necessary. In many cases where the scan node
is not the topmost plan node (eg, joins, aggregation), it's possible to
just return the table tuple directly instead of generating an intermediate
projection tuple. In preliminary testing, this reduced the CPU time
needed for 'SELECT COUNT(*) FROM foo' by about 10%.
passed to join selectivity estimators. Make use of this in eqjoinsel
to derive non-bogus selectivity for IN clauses. Further tweaking of
cost estimation for IN.
initdb forced because of pg_proc.h changes.
Try to model the effect of rescanning input tuples in mergejoins;
account for JOIN_IN short-circuiting where appropriate. Also, recognize
that mergejoin and hashjoin clauses may now be more than single operator
calls, so we have to charge appropriate execution costs.
necessarily following the JOIN syntax to develop the query plan. The old
behavior is still available by setting GUC variable JOIN_COLLAPSE_LIMIT
to 1. Also create a GUC variable FROM_COLLAPSE_LIMIT to control the
similar decision about when to collapse sub-SELECT lists into their parent
lists. (This behavior existed already, but the limit was always
GEQO_THRESHOLD/2; now it's separately adjustable.)
of known-equal expressions includes any constant expressions (including
Params from outer queries), we actively suppress any 'var = var'
clauses that are or could be deduced from the set, generating only the
deducible 'var = const' clauses instead. The idea here is to push down
the restrictions implied by the equality set to base relations whenever
possible. Once we have applied the 'var = const' clauses, the 'var = var'
clauses are redundant, and should be suppressed both to save work at
execution and to avoid double-counting restrictivity.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
that used to do it in planner. That was an ancient kluge that was
never satisfactory; errors should be detected at parse time when possible.
But at the time we didn't have the support mechanism (expression_tree_walker
et al) to make it convenient to do in the parser.
simplify callers. It turns out the common case is that the caller
does want to recurse into sub-queries, so push support for that into
these subroutines.
join_references(), it's practical to consolidate all join_references()
processing into the set_plan_references traversal in setrefs.c. This
seems considerably cleaner than the old way where we did it for join
quals in createplan.c and for targetlists in setrefs.c.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
a qualification clause (and hence can get away with being sloppy about
distinguishing FALSE from UNKNOWN). We need to know this in subselect.c;
marking the subplans in setrefs.c is too late.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
allocation in best_inner_indexscan(). While at it, simplify GEQO's
interface to the main planner --- make_join_rel() offers exactly the
API it really wants, whereas calling make_rels_by_clause_joins() and
make_rels_by_clauseless_joins() required jumping through hoops.
Rewrite gimme_tree for clarity (sometimes iteration is much better than
recursion), and approximately halve GEQO's runtime by recognizing that
tours of the forms (a,b,c,d,...) and (b,a,c,d,...) are equivalent
because of symmetry in make_join_rel().
in the planned representation of a subplan at all any more, only SubPlan.
This means subselect.c doesn't scribble on its input anymore, which seems
like a good thing; and there are no longer three different possible
interpretations of a SubLink. Simplify node naming and improve comments
in primnodes.h. No change to stored rules, though.
make VALUE a non-reserved word again, use less invasive method of passing
ConstraintTestValue into transformExpr, fix problems with nested constraint
testing, do correct thing with NULL result from a constraint expression,
remove memory leak. Domain checks still need much more work if we are going
to allow ALTER DOMAIN, however.
so that all executable expression nodes inherit from a common supertype
Expr. This is somewhat of an exercise in code purity rather than any
real functional advance, but getting rid of the extra Oper or Func node
formerly used in each operator or function call should provide at least
a little space and speed improvement.
initdb forced by changes in stored-rules representation.
('SELECT expression') inline, like macros, during the constant-folding
phase of planning. The actual expansion is not difficult, but checking
that we're not changing the semantics of the call turns out to be more
subtle than one might think; in particular must pay attention to
permissions issues, strictness, and volatility.
joinclauses is determined accurately for each join. Formerly, the code only
considered joinclauses that used all of the rels from the outer side of the
join; thus for example
FROM (a CROSS JOIN b) JOIN c ON (c.f1 = a.x AND c.f2 = b.y)
could not exploit a two-column index on c(f1,f2), since neither of the
qual clauses would be in the joininfo list it looked in. The new code does
this correctly, and also is able to eliminate redundant clauses, thus fixing
the problem noted 24-Oct-02 by Hans-Jürgen Schönig.
parameter to allow it to be forced off for comparison purposes.
Add ORDER BY clauses to a bunch of regression test queries that will
otherwise produce randomly-ordered output in the new regime.
of groups produced by GROUP BY. This improves the accuracy of planning
estimates for grouped subselects, and is needed to check whether a
hashed aggregation plan risks memory overflow.
