Make it easier for readers of the FP docs to find out about possibly
truncated values.
Per complaint from Tom Duffey in message
F0E0F874-C86F-48D1-AA2A-0C5365BF5118@trillitech.com
Author: Albe Laurenz
Reviewed by: Abhijit Menon-Sen
With -Wtype-limits, gcc correctly points out that size_t can never be < 0.
Backpatch to 9.3 and 9.2. It's been like this forever, but in <= 9.1 you got
a lot other warnings with -Wtype-limits anyway (at least with my version of
gcc).
Andres Freund
On Unix, you can embed double-quotes in single-quotes, and via versa.
However, on Windows, you can only escape double-quotes in double-quotes,
so use that in the pg_dump -t/table example.
Backpatch to 9.3.
Report from Mike Toews
When there's a comment on an index that was created with UNIQUE or PRIMARY
KEY constraint syntax, we need to label the comment as depending on the
constraint not the index, since only the constraint object actually appears
in the dump. This incorrect dependency can lead to parallel pg_restore
trying to restore the comment before the index has been created, per bug
#8257 from Lloyd Albin.
This patch fixes pg_dump to produce the right dependency in dumps made
in the future. Usually we also try to hack pg_restore to work around
bogus dependencies, so that existing (wrong) dumps can still be restored in
parallel mode; but that doesn't seem practical here since there's no easy
way to relate the constraint dump entry to the comment after the fact.
Andres Freund
On Unix-ish platforms, EWOULDBLOCK may be the same as EAGAIN, which is
*not* a success return, at least not on Linux. We need to treat it as a
failure to avoid giving a misleading error message. Per the Single Unix
Spec, only EINPROGRESS and EINTR returns indicate that the connection
attempt is in progress.
On Windows, on the other hand, EWOULDBLOCK (WSAEWOULDBLOCK) is the expected
case. We must accept EINPROGRESS as well because Cygwin will return that,
and it doesn't seem worth distinguishing Cygwin from native Windows here.
It's not very clear whether EINTR can occur on Windows, but let's leave
that part of the logic alone in the absence of concrete trouble reports.
Also, remove the test for errno == 0, effectively reverting commit
da9501bddb42222dc33c031b1db6ce2133bcee7b, which AFAICS was just a thinko;
or at best it might have been a workaround for a platform-specific bug,
which we can hope is gone now thirteen years later. In any case, since
libpq makes no effort to reset errno to zero before calling connect(),
it seems unlikely that that test has ever reliably done anything useful.
Andres Freund and Tom Lane
Adjust the wording in the first para of "Sequence Manipulation Functions"
so that neither of the link phrases in it break across line boundaries,
in either A4- or US-page-size PDF output. This fixes a reported build
failure for the 9.3beta2 A4 PDF docs, and future-proofs this particular
para against causing similar problems in future. (Perhaps somebody will
fix this issue in the SGML/TeX documentation tool chain someday, but I'm
not holding my breath.)
Back-patch to all supported branches, since the same problem could rise up
to bite us in future updates if anyone changes anything earlier than this
in func.sgml.
Clang 3.3 correctly complains that a variable of type enum
MultiXactStatus cannot hold a value of -1, which makes sense. Change
the declared type of the variable to int instead, and apply casting as
necessary to avoid the warning.
Per notice from Andres Freund
In binary upgrade mode, we need to recreate and then drop dropped
columns so that all the columns get the right attribute number. This is
true for foreign tables as well as for native tables. For foreign
tables we have been getting the first part right but not the second,
leading to bogus columns in the upgraded database. Fix this all the way
back to 9.1, where foreign tables were introduced.
In replication, when we shutdown the master, walsender tries to send
all the outstanding WAL records to the standby, and then to exit. This
basically means that all the WAL records are fully synced between
two servers after the clean shutdown of the master. So, after
promoting the standby to new master, we can restart the stopped
master as new standby without the need for a fresh backup from
new master.
But there was one problem so far: though walsender tries to send all
the outstanding WAL records, it doesn't wait for them to be replicated
to the standby. Then, before receiving all the WAL records,
walreceiver can detect the closure of connection and exit. We cannot
guarantee that there is no missing WAL in the standby after clean
shutdown of the master. In this case, backup from new master is
required when restarting the stopped master as new standby.
This patch fixes this problem. It just changes walsender so that it
waits for all the outstanding WAL records to be replicated to the
standby before closing the replication connection.
Per discussion, this is a fix that needs to get backpatched rather than
new feature. So, back-patch to 9.1 where enough infrastructure for
this exists.
Patch by me, reviewed by Andres Freund.
In some cases with higher numbers of subtransactions
it was possible for us to incorrectly initialize
subtrans leading to complaints of missing pages.
Bug report by Sergey Konoplev
Analysis and fix by Andres Freund
If there is no <date> element, the publication date for the EPUB
manifest is taken from the copyright year. But something like
"1996-2013" is not a legal date specification. So the EPUB output
currently fails epubcheck.
Put in a separate <date> element with the current year. Put it in
legal.sgml, because copyright.pl already instructs to update that
manually, so it hopefully won't be missed.
In Danish collations, there are letter combinations which sort
higher than 'Z'. A test for values > 'WA' was picking up rows
where the value started with 'AA', causing the test to fail.
Backpatch to 9.2, where the failing test was added.
Per report from Svenne Krap and analysis by Jeff Janes
ALTER TABLE .. VALIDATE CONSTRAINT previously
gave incorrect details about lock levels and
therefore incomplete reasons to use the option.
Initial bug report and fix from Marko Tiikkaja
Reworded by me to include comments by Kevin Grittner
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
This avoids platform-dependent behavior wherein pg_sleep() might fail to be
interrupted by statement timeout, query cancel, SIGTERM, etc. Also, since
there's no reason to wake up once a second any more, we can reduce the
power consumption of a sleeping backend a tad.
Back-patch to 9.3, since use of SA_RESTART for SIGALRM makes this a bigger
issue than it used to be.
The exclusion of SIGALRM dates back to Berkeley days, when Postgres used
SIGALRM in only one very short stretch of code. Nowadays, allowing it to
interrupt kernel calls doesn't seem like a very good idea, since its use
for statement_timeout means SIGALRM could occur anyplace in the code, and
there are far too many call sites where we aren't prepared to deal with
EINTR failures. When third-party code is taken into consideration, it
seems impossible that we ever could be fully EINTR-proof, so better to
use SA_RESTART always and deal with the implications of that. One such
implication is that we should not assume pg_usleep() will be terminated
early by a signal. Therefore, long sleeps should probably be replaced
by WaitLatch operations where practical.
Back-patch to 9.3 so we can get some beta testing on this change.
SP-GiST's original scheme for avoiding deadlocks during concurrent index
insertions doesn't work, as per report from Hailong Li, and there isn't any
evident way to make it work completely. We could possibly lock individual
inner tuples instead of their whole pages, but preliminary experimentation
suggests that the performance penalty would be huge. Instead, if we fail
to get a buffer lock while descending the tree, just restart the tree
descent altogether. We keep the old tuple positioning rules, though, in
hopes of reducing the number of cases where this can happen.
Teodor Sigaev, somewhat edited by Tom Lane
elog.c has historically treated LOG messages as low-priority during
bootstrap and standalone operation. This has led to confusion and even
masked a bug, because the normal expectation of code authors is that
elog(LOG) will put something into the postmaster log, and that wasn't
happening during initdb. So get rid of the special-case rule and make
the priority order the same as it is in normal operation. To keep from
cluttering initdb's output and the behavior of a standalone backend,
tweak the severity level of three messages routinely issued by xlog.c
during startup and shutdown so that they won't appear in these cases.
Per my proposal back in December.
pg_filedump and other external utility programs are likely to want to be
able to check Postgres page checksums. To avoid messy duplication of code,
move the checksumming functionality into an exported header file, much as
we did awhile back for the CRC code.
In passing, get rid of an unportable assumption that a static char[] array
will be word-aligned, and do some other minor code beautification.
Memory was allocated based on the sizeof a type that was not the type of
the pointer that the result was being assigned to. The types happen to
be of the same size, but it's still wrong.
In most scenarios a portal without a ResourceOwner is dead and not subject
to any further execution, but a portal for a cursor WITH HOLD remains in
existence with no ResourceOwner after the creating transaction is over.
In this situation, if we attempt to "execute" the portal directly to fetch
data from it, we were setting CurrentResourceOwner to NULL, leading to a
segfault if the datatype output code did anything that required a resource
owner (such as trying to fetch system catalog entries that weren't already
cached). The case appears to be impossible to provoke with stock libpq,
but psqlODBC at least is able to cause it when working with held cursors.
Simplest fix is to just skip the assignment to CurrentResourceOwner, so
that any resources used by the data output operations will be managed by
the transaction-level resource owner instead. For consistency I changed
all the places that install a portal's resowner as current, even though
some of them are probably not reachable with a held cursor's portal.
Per report from Joshua Berry (with thanks to Hiroshi Inoue for developing
a self-contained test case). Back-patch to all supported versions.
Several loops in the JSON parser examined a byte in memory just before
checking whether its address was in-bounds, so they could read one byte
beyond the datum's allocation. A SIGSEGV is possible. New in 9.3, so
no back-patch.
Since commit f21bb9cfb5646e1793dcc9c0ea697bab99afa523, this function
ignores the caller-provided length and loops until it finds a
terminator, which GetVirtualXIDsDelayingChkpt() never adds. Restore the
previous loop control logic. In passing, revert the addition of an
unused variable by the same commit, presumably a debugging relic.
Consumers are entitled to read the full 64 bytes pertaining to a Name;
using a shorter NULL-terminated string leads to reading beyond the end
its allocation; a SIGSEGV is possible. Use the frequent idiom of
copying to a NameData on the stack. New in 9.3, so no back-patch.
Extend the FDW API (which we already changed for 9.3) so that an FDW can
report whether specific foreign tables are insertable/updatable/deletable.
The default assumption continues to be that they're updatable if the
relevant executor callback function is supplied by the FDW, but finer
granularity is now possible. As a test case, add an "updatable" option to
contrib/postgres_fdw.
This patch also fixes the information_schema views, which previously did
not think that foreign tables were ever updatable, and fixes
view_is_auto_updatable() so that a view on a foreign table can be
auto-updatable.
initdb forced due to changes in information_schema views and the functions
they rely on. This is a bit unfortunate to do post-beta1, but if we don't
change this now then we'll have another API break for FDWs when we do
change it.
Dean Rasheed, somewhat editorialized on by Tom Lane
Per discussion on -hackers. We treat Unicode escapes when unescaping
them similarly to the way we treat them in PostgreSQL string literals.
Escapes in the ASCII range are always accepted, no matter what the
database encoding. Escapes for higher code points are only processed in
UTF8 databases, and attempts to process them in other databases will
result in an error. \u0000 is never unescaped, since it would result in
an impermissible null byte.
We need to increment the refcount on the composite type's cached tuple
descriptor while we do lookups of its column types. Otherwise a cache
flush could occur and release the tuple descriptor before we're done with
it. This fails reliably with -DCLOBBER_CACHE_ALWAYS, but the odds of a
failure in a production build seem rather low (since the pfree'd descriptor
typically wouldn't get scribbled on immediately). That may explain the
lack of any previous reports. Buildfarm issue noted by Christian Ullrich.
Back-patch to 9.1 where the bogus code was added.
pg_isready displays the host name and the port number that it uses to connect
to the server. So far, pg_isready didn't use the conninfo specified in -d option
for calculating those host name and port number. This can lead to wrong display
to a user. This commit changes pg_isready so that it uses the conninfo for that
calculation.
Original patch by Phil Sorber, modified by me.
getSchemaData() must identify extension member objects and mark them
as not to be dumped. This must happen after reading all objects that can be
direct members of extensions, but before we begin to process table subsidiary
objects. Both rules and event triggers were wrong in this regard.
Backport rules portion of patch to 9.1 -- event triggers do not exist prior to 9.3.
Suggested fix by Tom Lane, initial complaint and patch by me.
Autovacuum occurring while the test runs could allow some of the inserts to
go into recycled space, thus changing the output ordering of later queries.
While we could complicate those queries to force sorting of their output
rows, it doesn't seem like that would make the test better in any
meaningful way, and conceivably it could hide unexpected diffs. Instead,
tweak the affected queries so that the inserted rows aren't updated by the
following UPDATE. Per buildfarm.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
