A similar check existed in the MSVC scripts that have been removed in
v17 by 1301c80b21, but nothing of the kind was checked in meson when
building with a 4-byte off_t.
This commit adds a check to fail the builds when trying to use a
relation file size higher than 1GB when off_t is 4 bytes, like
./configure, rather than detecting these failures at runtime because the
code is not able to handle large files in this case.
Backpatch down to v16, where meson has been introduced.
Discussion: https://postgr.es/m/aQ0hG36IrkaSGfN8@paquier.xyz
Backpatch-through: 16
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
Several functions could overflow their size calculations, when presented
with very large inputs from remote and/or untrusted locations, and then
allocate buffers that were too small to hold the intended contents.
Switch from int to size_t where appropriate, and check for overflow
conditions when the inputs could have plausibly originated outside of
the libpq trust boundary. (Overflows from within the trust boundary are
still possible, but these will be fixed separately.) A version of
add_size() is ported from the backend to assist with code that performs
more complicated concatenation.
Reported-by: Aleksey Solovev (Positive Technologies)
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12818
Backpatch-through: 13
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
The following parameters can only be set at server start because
their context is PGC_POSTMASTER, but this information was missing
or incorrectly documented. This commit adds or corrects
that information for the following parameters:
* debug_io_direct
* dynamic_shared_memory_type
* event_source
* huge_pages
* io_max_combine_limit
* max_notify_queue_pages
* shared_memory_type
* track_commit_timestamp
* wal_decode_buffer_size
Backpatched to all supported branches.
Author: Karina Litskevich <litskevichkarina@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwGfPzcin-_6XwPgVbWTOUFVZgHF5g9ROrwLUdCTfjy=0A@mail.gmail.com
Backpatch-through: 13
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
postgres_fdw supports EvalPlanQual testing by using the infrastructure
provided by the core with the RecheckForeignScan callback routine (cf.
commits 5fc4c26db and 385f337c9), but there has been no test coverage
for that, except that recent commit 12609fbac, which fixed an issue in
commit 385f337c9, added a test case to exercise only a code path added
by that commit to the core infrastructure. So let's add test cases to
exercise other code paths as well at this time.
Like commit 12609fbac, back-patch to all supported branches.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAPmGK15%2B6H%3DkDA%3D-y3Y28OAPY7fbAdyMosVofZZ%2BNc769epVTQ%40mail.gmail.com
Backpatch-through: 13
If any shell command fails, the whole script should fail. To avoid
future omissions, add this even for single-command scripts that use su
with heredoc syntax, as they might be extended or copied-and-pasted.
Extracted from a larger patch that wanted to use #error during
compilation, leading to the diagnosis of this problem.
Reviewed-by: Tristan Partin <tristan@partin.io> (earlier version)
Discussion: https://postgr.es/m/DDZP25P4VZ48.3LWMZBGA1K9RH%40partin.io
Backpatch-through: 15
The test introduced by 17b2d5ec75 verifies that a WAL receiver
survives across a timeline jump by searching the server logs for
termination messages. However, it called restart() before the timeline
switch, which kills the WAL receiver and may log the exact message being
checked, hence failing the test. As TAP tests reuse the same log file
across restarts, a rotate_logfile() is used before the restart so as the
log matching check is not impacted by log entries generated by a
previous shutdown.
Recent changes to file handle inheritance altered I/O timing enough to
make this fail consistently while testing another patch.
While on it, this adds an extra check based on a PID comparison. This
test may lead to false positives as it could be possible that the WAL
receiver has processed a timeline jump before the initial PID is
grabbed, but it should be good enough in most cases.
Like 17b2d5ec75, backpatch down to v13.
Author: Bryan Green <dbryan.green@gmail.com>
Co-authored-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/9d00b597-d64a-4f1e-802e-90f9dc394c70@gmail.com
Backpatch-through: 13
In 2a0faed9d7, which added JIT compilation support for expressions, I
accidentally used sizeof(LLVMBasicBlockRef *) instead of
sizeof(LLVMBasicBlockRef) as part of computing the size of an allocation. That
turns out to have no real negative consequences due to LLVMBasicBlockRef being
a pointer itself (and thus having the same size). It still is wrong and
confusing, so fix it.
Reported by coverity.
Backpatch-through: 13
Commit a95e3d84c0 added ActiveSnapshot push+pop when processing
work-items (BRIN autosummarization), but forgot to handle the case of
a transaction failing during the run, which drops the snapshot untimely.
Fix by making the pop conditional on an element being actually there.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511041648.nofajnuddmwk@alvherre.pgsql
Backpatch commit 7bc9a8bdd2 to 13-17. The motivation for backpatching is that
we want to update CI to Debian Trixie. Trixie contains a newer mingw
installation, which would trigger the warning addressed by 7bc9a8bdd2. The
risk of backpatching seems fairly low, given that it did not cause issues in
the branches the commit is already present.
While CI is not present in 13-14, it seems better to be consistent across
branches.
Author: Thomas Munro <tmunro@postgresql.org>
Discussion: https://postgr.es/m/o5yadhhmyjo53svzwvaocww6zkrp63i4f32cw3treuh46pxtza@hyqio5b2tkt6
Backpatch-through: 13
It's possible to define BRIN indexes on functions that require a
snapshot to run, but the autosummarization feature introduced by commit
7526e10224 fails to provide one. This causes autovacuum to leave a
BRIN placeholder tuple behind after a failed work-item execution, making
such indexes less efficient. Repair by obtaining a snapshot prior to
running the task, and add a test to verify this behavior.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reported-by: Giovanni Fabris <giovanni.fabris@icon.it>
Reported-by: Arthur Nascimento <tureba@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/202511031106.h4fwyuyui6fz@alvherre.pgsql
Commit b4f584f9d2 (affecting v15~, later backpatched down to 13 as of
3635a0a35a) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
This commit reverts 818fefd8fd, that has been introduced to address a
an instability in some of the TAP tests due to the presence of random
standby snapshot WAL records, when slots are invalidated by
InvalidatePossiblyObsoleteSlot().
Anyway, this commit had also the consequence of introducing a behavior
regression. After 818fefd8fd, the code may determine that a slot needs
to be invalidated while it may not require one: the slot may have moved
from a conflicting state to a non-conflicting state between the moment
when the mutex is released and the moment when we recheck the slot, in
InvalidatePossiblyObsoleteSlot(). Hence, the invalidations may be more
aggressive than they actually have to.
105b2cb336 has tackled the test instability in a way that should be
hopefully sufficient for the buildfarm, even for slow members:
- In v18, the test relies on an injection point that bypasses the
creation of the random records generated for standby snapshots,
eliminating the random factor that impacted the test. This option was
not available when 818fefd8fd was discussed.
- In v16 and v17, the problem was bypassed by disallowing a slot to
become active in some of the scenarios tested.
While on it, this commit adds a comment to document that it is fine for
a recheck to use xmin and LSN values stored in the slot, without storing
and reusing them across multiple checks.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/f492465f-657e-49af-8317-987460cb68b0.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 16
Because long is 32-bit on 64-bit Windows, it isn't a good datatype to
store the difference between 2 pointers. The under-sized type could
overflow and lead to scary warnings in MEMORY_CONTEXT_CHECKING builds,
such as:
WARNING: problem in alloc set ExecutorState: bad single-chunk %p in block %p
However, the problem lies only in the code running the check, not from
an actual memory accounting bug.
Fix by using "Size" instead of "long". This means using an unsigned
type rather than the previous signed type. If the block's freeptr was
corrupted, we'd still catch that if the unsigned type wrapped. Unsigned
allows us to avoid further needless complexities around comparing signed
and unsigned types.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAApHDvo-RmiT4s33J=aC9C_-wPZjOXQ232V-EZFgKftSsNRi4w@mail.gmail.com
When dealing with ResultRelInfos for partitions, there are cases where
there are mixed requirements for the ri_RootResultRelInfo. There are
cases when the partition itself requires a NULL ri_RootResultRelInfo and
in the same query, the same partition may require a ResultRelInfo with
its parent set in ri_RootResultRelInfo. This could cause the column
mapping between the partitioned table and the partition not to be done
which could result in crashes if the column attnums didn't match
exactly.
The fix is simple. We now check that the ri_RootResultRelInfo matches
what the caller passed to ExecGetTriggerResultRel() and only return a
cached ResultRelInfo when the ri_RootResultRelInfo matches what the
caller wants, otherwise we'll make a new one.
Author: David Rowley <dgrowleyml@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Dmitry Fomin <fomin.list@gmail.com>
Discussion: https://postgr.es/m/7DCE78D7-0520-4207-822B-92F60AEA14B4@gmail.com
Backpatch-through: 15
These two functions expect there to be room to insert another item
in the FreePageBtree's array, but their assertions were too weak
to guarantee that. This has little practical effect granting that
the callers are not buggy, but it seems to be misleading late-model
Coverity into complaining about possible array overrun.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/799984.1761150474@sss.pgh.pa.us
Backpatch-through: 13
Commit c6f7f11d8 intended to prevent leaking any PyObject reference
counts in edge cases (such as out-of-memory during string
construction), but actually it introduced a leak in the normal case.
Repeating an error-trapping operation often enough would lead to
session-lifespan memory bloat. The problem is that I failed to
think about the fact that PyObject_GetAttrString() increments the
refcount of the returned PyObject, so that simply walking down the
list of error frame objects causes all but the first one to have
their refcount incremented.
I experimented with several more-or-less-complex ways around that,
and eventually concluded that the right fix is simply to drop the
newly-obtained refcount as soon as we walk to the next frame
object in PLy_traceback. This sounds unsafe, but it's perfectly
okay because the caller holds a refcount on the first frame object
and each frame object holds a refcount on the next one; so the
current frame object can't disappear underneath us.
By the same token, we can simplify the caller's cleanup back to
simply dropping its refcount on the first object. Cleanup of
each frame object will lead in turn to the refcount of the next
one going to zero.
I also added a couple of comments explaining why PLy_elog_impl()
doesn't try to free the strings acquired from PLy_get_spi_error_data()
or PLy_get_error_data(). That's because I got here by looking at a
Coverity complaint about how those strings might get leaked. They
are not leaked, but in testing that I discovered this other leak.
Back-patch, as c6f7f11d8 was. It's a bit nervous-making to be
putting such a fix into v13, which is only a couple weeks from its
final release; but I can't see that leaving a recently-introduced
leak in place is a better idea.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1203918.1761184159@sss.pgh.pa.us
Backpatch-through: 13
Commit 883a95646a introduced overflow entries in the replication lag tracker
to fix an issue where lag columns in pg_stat_replication could stall when
the replay LSN stopped advancing.
This commit adds comments clarifying the purpose and behavior of overflow
entries to improve code readability and understanding.
Since commit 883a95646a was recently applied and backpatched to all
supported branches, this follow-up commit is also backpatched accordingly.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CABPTF7VxqQA_DePxyZ7Y8V+ErYyXkmwJ1P6NC+YC+cvxMipWKw@mail.gmail.com
Backpatch-through: 13
When JIT deformed tuples (controlled via the jit_tuple_deforming GUC),
types narrower than sizeof(Datum) would be zero-extended up to Datum
width. This wasn't the same as what fetch_att() does in the standard
tuple deforming code. Logically the values are the same when fetching
via the DatumGet*() marcos, but negative numbers are not the same in
binary form.
In the report, the problem was manifesting itself with:
ERROR: could not find memoization table entry
in a query which had a "Cache Mode: binary" Memoize node. However, it's
currently unclear what else is affected. Anything that uses
datum_image_eq() or datum_image_hash() on a Datum from a tuple deformed by
JIT could be affected, but it may not be limited to that.
The fix for this is simple: use signed extension instead of zero
extension.
Many thanks to Emmanuel Touzery for reporting this issue and providing
steps and backup which allowed the problem to easily be recreated.
Reported-by: Emmanuel Touzery <emmanuel.touzery@plandela.si>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/DB8P194MB08532256D5BAF894F241C06393F3A@DB8P194MB0853.EURP194.PROD.OUTLOOK.COM
Backpatch-through: 13
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
Previously, when the replay LSN reported in feedback messages from a standby
stopped advancing, for example, due to a recovery conflict, the write_lag and
flush_lag columns in pg_stat_replication would initially update but then stop
progressing. This prevented users from correctly monitoring replication lag.
The problem occurred because when any LSN stopped updating, the lag tracker's
cyclic buffer became full (the write head reached the slowest read head).
In that state, the lag tracker could no longer compute round-trip lag values
correctly.
This commit fixes the issue by handling the slowest read entry (the one
causing the buffer to fill) as a separate overflow entry and freeing space
so the write and other read heads can continue advancing in the buffer.
As a result, write_lag and flush_lag now continue updating even if the reported
replay LSN remains stalled.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAHGQGwGdGQ=1-X-71Caee-LREBUXSzyohkoQJd4yZZCMt24C0g@mail.gmail.com
Backpatch-through: 13
This file was previously added to v18 by commits a72f7d97be and
93fb76ca4e. Unlike the v18 version of the file, the back-branch
versions set the original baseline point to the most recent ABI
break documented in the git commit history. While we'd ordinarily
set it to something just before the .0 release, we're unlikely to
act upon ABI breaks in released minor versions, so it doesn't seem
worth the trouble to construct a comprehensive history.
Discussion: https://postgr.es/m/aPfDOD6F4FaJJd7M%40nathan
Backpatch-through: 13-17
A BlockNumber (32-bit) might not be large enough to add bo_pagesPerRange
to when the table contains close to 2^32 pages. At worst, this could
result in a cancellable infinite loop during the BRIN index scan with
power-of-2 pagesPerRange, and slow (inefficient) BRIN index scans and
scanning of unneeded heap blocks for non power-of-2 pagesPerRange.
Backpatch to all supported versions.
Author: sunil s <sunilfeb26@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOG6S4-tGksTQhVzJM19NzLYAHusXsK2HmADPZzGQcfZABsvpA@mail.gmail.com
Backpatch-through: 13
pgwin32_unsetenv() (compatibility routine of unsetenv() on Windows)
lacks the input validation that its sibling pgwin32_setenv() has.
Without these checks, calling unsetenv() with incorrect names crashes on
WIN32. However, invalid names should be handled, failing on EINVAL.
This commit adds the same checks as setenv() to fail with EINVAL for a
"name" set to NULL, an empty string, or if '=' is included in the value,
per POSIX requirements.
Like 7ca37fb040, backpatch down to v14. pgwin32_unsetenv() is defined
on REL_13_STABLE, but with the branch going EOL soon and the lack of
setenv() there for WIN32, nothing is done for v13.
Author: Bryan Green <dbryan.green@gmail.com>
Discussion: https://postgr.es/m/b6a1e52b-d808-4df7-87f7-2ff48d15003e@gmail.com
Backpatch-through: 14
The revised logic in 001_ssltests.pl would fail if openssl
doesn't work or if Perl is a 32-bit build, because it had
already overwritten $serialno with something inappropriate
to use in the eventual match. We could go back to the
previous code layout, but it seems best to introduce a
separate variable for the output of openssl.
Per failure on buildfarm member mamba, which has a 32-bit Perl.
It emerges that zlib's configuration logic is not robust enough
to guarantee that the macro will have the same ideas about struct
field layout as the library itself does, leading to corruption of
zlib's state struct followed by unintelligible failure messages.
This hazard has existed for a long time, but we'd not noticed
for several reasons:
(1) We only use gzgetc() when trying to read a manually-compressed
TOC file within a directory-format dump, which is a rarely-used
scenario that we weren't even testing before 20ec99589.
(2) No corruption actually occurs unless sizeof(long) is different
from sizeof(off_t) and the platform is big-endian.
(3) Some platforms have already fixed the configuration instability,
at least sufficiently for their environments.
Despite (3), it seems foolish to assume that the problem isn't
going to be present in some environments for a long time to come.
Hence, avoid relying on this macro. We can just #undef it and
fall back on the underlying function of the same name.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2122679.1760846783@sss.pgh.pa.us
Backpatch-through: 13
We must tell init about each role name we plan to connect as,
else SSPI auth fails. Similar to previous patches such as
14793f471, 973542866.
Oversight in 208927e65, per buildfarm member drongo.
(Although that was back-patched to v13, the test script
only exists in v16 and up.)
pg_prewarm() currently checks for SELECT privileges on the target
relation. However, indexes do not have access rights of their own,
so a role may be denied permission to prewarm an index despite
having the SELECT privilege on its parent table. This commit fixes
this by locking the parent table before the index (to avoid
deadlocks) and checking for SELECT on the parent table. Note that
the code is largely borrowed from
amcheck_lock_relation_and_check().
An obvious downside of this change is the extra AccessShareLock on
the parent table during prewarming, but that isn't expected to
cause too much trouble in practice.
Author: Ayush Vatsa <ayushvatsa1810@gmail.com>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CACX%2BKaMz2ZoOojh0nQ6QNBYx8Ak1Dkoko%3DD4FSb80BYW%2Bo8CHQ%40mail.gmail.com
Backpatch-through: 13
