The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
Some Sparc CPUs can be run in various coherence models, ranging from
RMO (relaxed) over PSO (partial) to TSO (total). Solaris has always
run CPUs in TSO mode while in userland, but linux didn't use to and
the various *BSDs still don't. Unfortunately the sparc TAS/S_UNLOCK
were only correct under TSO. Fix that by adding the necessary memory
barrier instructions. On sparcv8+, which should be all relevant CPUs,
these are treated as NOPs if the current consistency model doesn't
require the barriers.
Discussion: 20140630222854.GW26930@awork2.anarazel.de
Will be backpatched to all released branches once a few buildfarm
cycles haven't shown up problems. As I've no access to sparc, this is
blindly written.
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
Programs need execute permission on a DLL file to load it. MSYS
"install" ignores the mode argument, and our Cygwin build statically
links libpq into programs. That explains the lack of buildfarm trouble.
Back-patch to 9.0 (all supported versions).
PG_RETURN_BOOL() should only be used in functions following the V1 SQL
function API. This coding accidentally fails to fail since letting the
compiler coerce the Datum representation of bool back to plain bool
does give the right answer; but that doesn't make it a good idea.
Back-patch to older branches just to avoid unnecessary code divergence.
Previously the help message described that -m is an option for
"stop", "restart" and "promote" commands in pg_ctl. But actually
that's not an option for "promote". So this commit fixes that
incorrect description in the help message.
Back-patch to 9.3 where the incorrect description was added.
Specifically this commit updates forkname_to_number() so that the HINT
message includes "init" fork, and also adds the description of "init" fork
into pg_relation_size() document.
This is a part of the commit 2d00190495b22e0d0ba351b2cda9c95fb2e3d083
which has fixed the same oversight in master and 9.4. Back-patch to
9.1 where "init" fork was added.
In commit 0ca6bda8e7501947c05f30c127f6d12ff90b5a64, I rewrote the json.c
code that decided how to convert SQL data types into JSON values, so that
it no longer relied on typcategory which is a pretty untrustworthy guide
to the output format of user-defined datatypes. However, I overlooked the
fact that CREATE DOMAIN inherits typcategory from the base type, so that
the old coding did have the desirable property of treating domains like
their base types --- but only in some cases, because not all its decisions
turned on typcategory. The version of the patch that went into 9.4 and
up did a getBaseType() call to ensure that domains were always treated
like their base types, but I omitted that from the older branches, because
it would result in a behavioral change for domains over json or hstore;
a change that's arguably a bug fix, but nonetheless a change that users
had not asked for. What I overlooked was that this meant that domains
over numerics and boolean were no longer treated like their base types,
and that we *did* get a complaint about, ie bug #11103 from David Grelaud.
So let's do the getBaseType() call in the older branches as well, to
restore their previous behavior in these cases. That means 9.2 and 9.3
will now make these decisions just like 9.4. We could probably kluge
things to still ignore the domain's base type if it's json etc, but that
seems a bit silly.
Such cases are disallowed by the SQL spec, and even if we wanted to allow
them, the semantics seem ambiguous: how should the FK columns be matched up
with the columns of a unique index? (The matching could be significant in
the presence of opclasses with different notions of equality, so this issue
isn't just academic.) However, our code did not previously reject such
cases, but instead would either fail to match to any unique index, or
generate a bizarre opclass-lookup error because of sloppy thinking in the
index-matching code.
David Rowley
Previously, TOAST tables only required in the new cluster could cause
oid conflicts if they were auto-numbered and a later conflicting oid had
to be assigned.
Backpatch through 9.3
In 9.2, pg_receivexlog with verbose option has emitted the messages
at the end of each WAL file. But the commit 0b63291 suppressed such
messages by mistake. This commit fixes the bug so that pg_receivexlog
--verbose outputs such messages again.
Back-patch to 9.3 where the bug was added.
When autovacuum is nominally off, we will still launch autovac workers
to vacuum tables that are at risk of XID wraparound. But after we'd done
that, an autovac worker would proceed to autovacuum every table in the
targeted database, if they meet the usual thresholds for autovacuuming.
This is at best pretty unexpected; at worst it delays response to the
wraparound threat. Fix it so that if autovacuum is nominally off, we
*only* do forced vacuums and not any other work.
Per gripe from Andrey Zhidenkov. This has been like this all along,
so back-patch to all supported branches.
InitProcess() relies on IsBackgroundWorker to decide whether the PGPROC
for a new backend should be taken from ProcGlobal's freeProcs or from
bgworkerFreeProcs. In EXEC_BACKEND builds, InitProcess() is called
sooner than in non-EXEC_BACKEND builds, and IsBackgroundWorker wasn't
getting initialized soon enough.
Report by Noah Misch. Diagnosis and fix by me.
There were several oversights in recovery code where COMMIT/ABORT PREPARED
records were ignored:
* pg_last_xact_replay_timestamp() (wasn't updated for 2PC commits)
* recovery_min_apply_delay (2PC commits were applied immediately)
* recovery_target_xid (recovery would not stop if the XID used 2PC)
The first of those was reported by Sergiy Zuban in bug #11032, analyzed by
Tom Lane and Andres Freund. The bug was always there, but was masked before
commit d19bd29f07aef9e508ff047d128a4046cc8bc1e2, because COMMIT PREPARED
always created an extra regular transaction that was WAL-logged.
Backpatch to all supported versions (older versions didn't have all the
features and therefore didn't have all of the above bugs).
findDependencyLoops() was not bright about cases where there are multiple
dependency paths between the same two dumpable objects. In most scenarios
this did not hurt us too badly; but since the introduction of section
boundary pseudo-objects in commit a1ef01fe163b304760088e3e30eb22036910a495,
it was possible for this code to take unreasonable amounts of time (tens
of seconds on a database with a couple thousand objects), as reported in
bug #11033 from Joe Van Dyk. Joe's particular problem scenario involved
"pg_dump -a" mode with long chains of foreign key constraints, but I think
that similar problems could arise with other situations as long as there
were enough objects. To fix, add a flag array that lets us notice when we
arrive at the same object again while searching from a given start object.
This simple change seems to be enough to eliminate the performance problem.
Back-patch to 9.1, like the patch that introduced section boundary objects.
This is consistent with the POSIX verdict that kill() shall not report
ESRCH for a zombie process. Back-patch to 9.0 (all supported versions).
Test code from commit d7cdf6ee36adeac9233678fb8f2a112e6678a770 depends
on it, and log messages about kill() reporting "Invalid argument" will
cease to appear for this not-unexpected condition.
The executor has thrown errors for negative OFFSET values since 8.4 (see
commit bfce56eea45b1369b7bb2150a150d1ac109f5073), but in a moment of brain
fade I taught the planner that OFFSET with a constant negative value was a
no-op (commit 1a1832eb085e5bca198735e5d0e766a3cb61b8fc). Reinstate the
former behavior by only discarding OFFSET with a value of exactly 0. In
passing, adjust a planner comment that referenced the ancient behavior.
Back-patch to 9.3 where the mistake was introduced.
get_raw_page tried to validate the supplied block number against
RelationGetNumberOfBlocks(), which of course is only right when
accessing the main fork. In most cases, the main fork is longer
than the others, so that the check was too weak (allowing a
lower-level error to be reported, but no real harm to be done).
However, very small tables could have an FSM larger than their heap,
in which case the mistake prevented access to some FSM pages.
Per report from Torsten Foertsch.
In passing, make the bad-block-number error into an ereport not elog
(since it's certainly not an internal error); and fix sloppily
maintained comment for RelationGetNumberOfBlocksInFork.
This has been wrong since we invented relation forks, so back-patch
to all supported branches.
With OpenLDAP versions 2.4.24 through 2.4.31, inclusive, PostgreSQL
backends can crash at exit. Raise a warning during "configure" based on
the compile-time OpenLDAP version number, and test the crash scenario in
the dblink test suite. Back-patch to 9.0 (all supported versions).
In commit 631dc390f49909a5c8ebd6002cfb2bcee5415a9d, we started to handle
simple numeric timezone offsets via the zic library instead of the old
CTimeZone/HasCTZSet kluge. However, we overlooked the fact that the zic
code will reject UTC offsets exceeding a week (which seems a bit arbitrary,
but not because it's too tight ...). This led to possibly setting
session_timezone to NULL, which results in crashes in most timezone-related
operations as of 9.4, and crashes in a small number of places even before
that. So check for NULL return from pg_tzset_offset() and report an
appropriate error message. Per bug #11014 from Duncan Gillis.
Back-patch to all supported branches, like the previous patch.
(Unfortunately, as of today that no longer includes 8.4.)
In commit a61daa14d56867e90dc011bbba52ef771cea6770, we fixed pg_upgrade so
that it would install sane relminmxid and datminmxid values, but that does
not cure the problem for installations that were already pg_upgraded to
9.3; they'll initially have "1" in those fields. This is not a big problem
so long as 1 is "in the past" compared to the current nextMultiXact
counter. But if an installation were more than halfway to the MXID wrap
point at the time of upgrade, 1 would appear to be "in the future" and
that would effectively disable tracking of oldest MXIDs in those
tables/databases, until such time as the counter wrapped around.
While in itself this isn't worse than the situation pre-9.3, where we did
not manage MXID wraparound risk at all, the consequences of premature
truncation of pg_multixact are worse now; so we ought to make some effort
to cope with this. We discussed advising users to fix the tracking values
manually, but that seems both very tedious and very error-prone.
Instead, this patch adopts two amelioration rules. First, a relminmxid
value that is "in the future" is allowed to be overwritten with a
full-table VACUUM's actual freeze cutoff, ignoring the normal rule that
relminmxid should never go backwards. (This essentially assumes that we
have enough defenses in place that wraparound can never occur anymore,
and thus that a value "in the future" must be corrupt.) Second, if we see
any "in the future" values then we refrain from truncating pg_clog and
pg_multixact. This prevents loss of clog data until we have cleaned up
all the broken tracking data. In the worst case that could result in
considerable clog bloat, but in practice we expect that relfrozenxid-driven
freezing will happen soon enough to fix the problem before clog bloat
becomes intolerable. (Users could do manual VACUUM FREEZEs if not.)
Note that this mechanism cannot save us if there are already-wrapped or
already-truncated-away MXIDs in the table; it's only capable of dealing
with corrupt tracking values. But that's the situation we have with the
pg_upgrade bug.
For consistency, apply the same rules to relfrozenxid/datfrozenxid. There
are not known mechanisms for these to get messed up, but if they were, the
same tactics seem appropriate for fixing them.
When a view has a function-returning-composite in FROM, and there are
some dropped columns in the underlying composite type, ruleutils.c
printed junk in the column alias list for the reconstructed FROM entry.
Before 9.3, this was prevented by doing get_rte_attribute_is_dropped
tests while printing the column alias list; but that solution is not
currently available to us for reasons I'll explain below. Instead,
check for empty-string entries in the alias list, which can only exist
if that column position had been dropped at the time the view was made.
(The parser fills in empty strings to preserve the invariant that the
aliases correspond to physical column positions.)
While this is sufficient to handle the case of columns dropped before
the view was made, we have still got issues with columns dropped after
the view was made. In particular, the view could contain Vars that
explicitly reference such columns! The dependency machinery really
ought to refuse the column drop attempt in such cases, as it would do
when trying to drop a table column that's explicitly referenced in
views. However, we currently neglect to store dependencies on columns
of composite types, and fixing that is likely to be too big to be
back-patchable (not to mention that existing views in existing databases
would not have the needed pg_depend entries anyway). So I'll leave that
for a separate patch.
Pre-9.3, ruleutils would print such Vars normally (with their original
column names) even though it suppressed their entries in the RTE's
column alias list. This is certainly bogus, since the printed view
definition would fail to reload, but at least it didn't crash. However,
as of 9.3 the printed column alias list is tightly tied to the names
printed for Vars; so we can't treat columns as dropped for one purpose
and not dropped for the other. This is why we can't just put back the
get_rte_attribute_is_dropped test: it results in an assertion failure
if the view in fact contains any Vars referencing the dropped column.
Once we've got dependencies preventing such cases, we'll probably want
to do it that way instead of relying on the empty-string test used here.
This fix turned up a very ancient bug in outfuncs/readfuncs, namely
that T_String nodes containing empty strings were not dumped/reloaded
correctly: the node was printed as "<>" which is read as a string
value of <>. Since (per SQL) we disallow empty-string identifiers,
such nodes don't occur normally, which is why we'd not noticed.
(Such nodes aren't used for literal constants, just identifiers.)
Per report from Marc Schablewski. Back-patch to 9.3 which is where
the rule printing behavior changed. The dangling-variable case is
broken all the way back, but that's not what his complaint is about.
If pg_regcomp failed after having invoked markst/cleanst, it would leak any
"struct subre" nodes it had created. (We've already detected all regex
syntax errors at that point, so the only likely causes of later failure
would be query cancel or out-of-memory.) To fix, make sure freesrnode
knows the difference between the pre-cleanst and post-cleanst cleanup
procedures. Add some documentation of this less-than-obvious point.
Also, newlacon did the wrong thing with an out-of-memory failure from
realloc(), so that the previously allocated array would be leaked.
Both of these are pretty low-probability scenarios, but a bug is a bug,
so patch all the way back.
Per bug #10976 from Arthur O'Dwyer.
The consistent function contained several bugs:
* The "if (which2) { ... }" block was broken. It compared the argument's
lower bound against centroid's upper bound, while it was supposed to compare
the argument's upper bound against the centroid's lower bound (the comment
was correct, code was wrong). Also, it cleared bits in the "which1"
variable, while it was supposed to clear bits in "which2".
* If the argument's upper bound was equal to the centroid's lower bound, we
descended to both halves (= all quadrants). That's unnecessary, searching
the right quadrants is sufficient. This didn't lead to incorrect query
results, but was clearly wrong, and slowed down queries unnecessarily.
* In the case that argument's lower bound is adjacent to the centroid's
upper bound, we also don't need to visit all quadrants. Per similar
reasoning as previous point.
* The code where we compare the previous centroid with the current centroid
should match the code where we compare the current centroid with the
argument. The point of that code is to redo the calculation done in the
previous level, to see if we were supposed to traverse left or right (or up
or down), and if we actually did. If we moved in the different direction,
then we know there are no matches for bound.
Refactor the code and adds comments to make it more readable and easier to
reason about.
Backpatch to 9.3 where SP-GiST support for range types was introduced.
Trying to reassign objects owned by a user that had text search
dictionaries or configurations used to fail with:
ERROR: unexpected classid 3600
or
ERROR: unexpected classid 3602
Fix by adding cases for those object types in a switch in pg_shdepend.c.
Both REASSIGN OWNED and text search objects go back all the way to 8.1,
so backpatch to all supported branches. In 9.3 the alter-owner code was
made generic, so the required change in recent branches is pretty
simple; however, for 9.2 and older ones we need some additional
reshuffling to enable specifying objects by OID rather than name.
Text search templates and parsers are not owned objects, so there's no
change required for them.
Per bug #9749 reported by Michal Novotný
ExecEvalWholeRowVar incorrectly supposed that it could "bless" the source
TupleTableSlot just once per query. But if the input is coming from an
Append (or, perhaps, other cases?) more than one slot might be returned
over the query run. This led to "record type has not been registered"
errors when a composite datum was extracted from a non-blessed slot.
This bug has been there a long time; I guess it escaped notice because when
dealing with subqueries the planner tends to expand whole-row Vars into
RowExprs, which don't have the same problem. It is possible to trigger
the problem in all active branches, though, as illustrated by the added
regression test.
While the x output of "select x from t group by x" can be presumed unique,
this does not hold for "select x, generate_series(1,10) from t group by x",
because we may expand the set-returning function after the grouping step.
(Perhaps that should be re-thought; but considering all the other oddities
involved with SRFs in targetlists, it seems unlikely we'll change it.)
Put a check in query_is_distinct_for() so it's not fooled by such cases.
Back-patch to all supported branches.
David Rowley
This function wasn't originally thought to be really user-facing,
because converting a table to a view isn't something we expect people
to do manually. So not all that much effort was spent on the error
messages; in particular, while the code will complain that you got
the column types wrong it won't say exactly what they are. But since
we repurposed the code to also check compatibility of rule RETURNING
lists, it's definitely user-facing. It now seems worthwhile to add
errdetail messages showing exactly what the conflict is when there's
a mismatch of column names or types. This is prompted by bug #10836
from Matthias Raffelsieper, which might have been forestalled if the
error message had reported the wrong column type as being "record".
Per Alvaro's advice, back-patch to branches before 9.4, but resist
the temptation to rephrase any existing strings there. Adding new
strings is not really a translation degradation; anyway having the
info presented in English is better than not having it at all.
Instead of truncating pg_multixact at vacuum time, do it only at
checkpoint time. The reason for doing it this way is twofold: first, we
want it to delete only segments that we're certain will not be required
if there's a crash immediately after the removal; and second, we want to
do it relatively often so that older files are not left behind if
there's an untimely crash.
Per my proposal in
http://www.postgresql.org/message-id/20140626044519.GJ7340@eldon.alvh.no-ip.org
we now execute the truncation in the checkpointer process rather than as
part of vacuum. Vacuum is in only charge of maintaining in shared
memory the value to which it's possible to truncate the files; that
value is stored as part of checkpoints also, and so upon recovery we can
reuse the same value to re-execute truncate and reset the
oldest-value-still-safe-to-use to one known to remain after truncation.
Per bug reported by Jeff Janes in the course of his tests involving
bug #8673.
While at it, update some comments that hadn't been updated since
multixacts were changed.
Backpatch to 9.3, where persistency of pg_multixact files was
introduced by commit 0ac5ad5134f2.
We were allowing a table's pg_class.relminmxid value to move backwards
when heaps were swapped by VACUUM FULL or CLUSTER. There is a
similar protection against relfrozenxid going backwards, which we
neglected to clone when the multixact stuff was rejiggered by commit
0ac5ad5134f276.
Backpatch to 9.3, where relminmxid was introduced.
As reported by Heikki in
http://www.postgresql.org/message-id/52401AEA.9000608@vmware.com
Don't assert MultiXactIdIsRunning if the multi came from a tuple that
had been share-locked and later copied over to the new cluster by
pg_upgrade. Doing that causes an error to be raised unnecessarily:
MultiXactIdIsRunning is not open to the possibility that its argument
came from a pg_upgraded tuple, and all its other callers are already
checking; but such multis cannot, obviously, have transactions still
running, so the assert is pointless.
Noticed while investigating the bogus pg_multixact/offsets/0000 file
left over by pg_upgrade, as reported by Andres Freund in
http://www.postgresql.org/message-id/20140530121631.GE25431@alap3.anarazel.de
Backpatch to 9.3, as the commit that introduced the buglet.
When we committed a87c729153e372f3731689a7be007bc2b53f1410, we somehow
failed to notice that it didn't merely improve plan quality for expression
indexes; there were very closely related cases that failed outright with
"could not find pathkey item to sort". The failing cases seem to be those
where the planner was already capable of selecting a MergeAppend plan,
and there was inheritance involved: the lack of appropriate eclass child
members would prevent prepare_sort_from_pathkeys() from succeeding on the
MergeAppend's child plan nodes for inheritance child tables.
Accordingly, back-patch into 9.1 through 9.3, along with an extra
regression test case covering the problem.
Per trouble report from Michael Glaesemann.
populate_recordset_object_start() improperly created a new hash table
(overwriting the link to the existing one) if called at nest levels
greater than one. This resulted in previous fields not appearing in
the final output, as reported by Matti Hameister in bug #10728.
In 9.4 the problem also affects json_to_recordset.
This perhaps missed detection earlier because the default behavior is to
throw an error for nested objects: you have to pass use_json_as_text = true
to see the problem.
In addition, fix query-lifespan leakage of the hashtable created by
json_populate_record(). This is pretty much the same problem recently
fixed in dblink: creating an intended-to-be-temporary context underneath
the executor's per-tuple context isn't enough to make it go away at the
end of the tuple cycle, because MemoryContextReset is not
MemoryContextResetAndDeleteChildren.
Michael Paquier and Tom Lane
The syntax doesn't let you specify "WITH OIDS" for foreign tables, but it
was still possible with default_with_oids=true. But the rest of the system,
including pg_dump, isn't prepared to handle foreign tables with OIDs
properly.
Backpatch down to 9.1, where foreign tables were introduced. It's possible
that there are databases out there that already have foreign tables with
OIDs. There isn't much we can do about that, but at least we can prevent
them from being created in the future.
Patch by Etsuro Fujita, reviewed by Hadi Moshayedi.
Since fdf9e21196a lazy_vacuum_page() rechecks the all-visible status
of pages in the second pass over the heap. It does so inside a
critical section, but both visibilitymap_test() and
heap_page_is_all_visible() perform operations that should not happen
inside one. The former potentially performs IO and both potentially do
memory allocations.
To fix, simply move all the all-visible handling outside the critical
section. Doing so means that the PD_ALL_VISIBLE on the page won't be
included in the full page image of the HEAP2_CLEAN record anymore. But
that's fine, the flag will be set by the HEAP2_VISIBLE logged later.
Backpatch to 9.3 where the problem was introduced. The bug only came
to light due to the assertion added in 4a170ee9 and isn't likely to
cause problems in production scenarios. The worst outcome is a
avoidable PANIC restart.
This also gets rid of the difference in the order of operations
between master and standby mentioned in 2a8e1ac5.
Per reports from David Leverton and Keith Fiske in bug #10533.
ExecMakeTableFunctionResult evaluated the arguments for a function-in-FROM
in the query-lifespan memory context. This is insignificant in simple
cases where the function relation is scanned only once; but if the function
is in a sub-SELECT or is on the inside of a nested loop, any memory
consumed during argument evaluation can add up quickly. (The potential for
trouble here had been foreseen long ago, per existing comments; but we'd
not previously seen a complaint from the field about it.) To fix, create
an additional temporary context just for this purpose.
Per an example from MauMau. Back-patch to all active branches.
Any OS user able to access the socket can connect as the bootstrap
superuser and proceed to execute arbitrary code as the OS user running
the test. Protect against that by placing the socket in a temporary,
mode-0700 subdirectory of /tmp. The pg_regress-based test suites and
the pg_upgrade test suite were vulnerable; the $(prove_check)-based test
suites were already secure. Back-patch to 8.4 (all supported versions).
The hazard remains wherever the temporary cluster accepts TCP
connections, notably on Windows.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Security: CVE-2014-0067
This function is pervasive on free software operating systems; import
NetBSD's implementation. Back-patch to 8.4, like the commit that will
harness it.
