An out-of-memory in most of these would lead to strange behavior, like
connecting to a different database than intended, but some would lead to
an outright segfault.
Alex Shulgin and me. Backpatch to all supported versions.
postgres_fdw would send query conditions involving system columns to the
remote server, even though it makes no effort to ensure that system
columns other than CTID match what the remote side thinks. tableoid,
in particular, probably won't match and might have some use in queries.
Hence, prevent sending conditions that include non-CTID system columns.
Also, create_foreignscan_plan neglected to check local restriction
conditions while determining whether to set fsSystemCol for a foreign
scan plan node. This again would bollix the results for queries that
test a foreign table's tableoid.
Back-patch the first fix to 9.3 where postgres_fdw was introduced.
Back-patch the second to 9.2. The code is probably broken in 9.1 as
well, but the patch doesn't apply cleanly there; given the weak state
of support for FDWs in 9.1, it doesn't seem worth fixing.
Etsuro Fujita, reviewed by Ashutosh Bapat, and somewhat modified by me
The regression test cases added in commits b2cbced9e et al depended in part
on the Russian timezone offset changes of Oct 2014. While this is of no
particular concern for a default Postgres build, it was possible for a
build using --with-system-tzdata to fail the tests if the system tzdata
database wasn't au courant. Bjorn Munch and Christoph Berg both complained
about this while packaging 9.4rc1, so we probably shouldn't insist on the
system tzdata being up-to-date. Instead, make an equivalent test using a
zone change that occurred in Venezuela in 2007. With this patch, the
regression tests should pass using any tzdata set from 2012 or later.
(I can't muster much sympathy for somebody using --with-system-tzdata
on a machine whose system tzdata is more than three years out-of-date.)
pg_dump/parallel.c was using realloc() directly with no error check.
While the odds of an actual failure here seem pretty low, Coverity
complains about it, so fix by using pg_realloc() instead.
While looking for other instances, I noticed a couple of places in
psql that hadn't gotten the memo about the availability of pg_realloc.
These aren't bugs, since they did have error checks, but verbosely
inconsistent code is not a good thing.
Back-patch as far as 9.3. 9.2 did not have pg_dump/parallel.c, nor
did it have pg_realloc available in all frontend code.
DST law changes in the Turks & Caicos Islands (America/Grand_Turk) and
in Fiji. New zone Pacific/Bougainville for portions of Papua New Guinea.
Historical changes for Korea and Vietnam.
630cd14426dc added initdb --sync-only, for use by pg_upgrade, by just
exposing the existing fsync code. That's wrong, because initdb so far
had absolutely no reason to deal with tablespaces.
Fix --sync-only by additionally explicitly syncing each of the
tablespaces.
Backpatch to 9.3 where --sync-only was introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are only reset when performing a unclean
restart. That means they have to be synced to disk during clean
shutdowns. During normal processing that's achieved by registering a
buffer's file to be fsynced at the next checkpoint when flushed. But
ResetUnloggedRelations() doesn't go through the buffer manager, so
nothing will force reset relations to disk before the next shutdown
checkpoint.
So just make ResetUnloggedRelations() fsync the newly created main
forks to disk.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
Unlogged relations are reset at the end of crash recovery as they're
only synced to disk during a proper shutdown. Unfortunately that and
later steps can fail, e.g. due to running out of space. This reset
was, up to now performed after marking the database as having finished
crash recovery successfully. As out of space errors trigger a crash
restart that could lead to the situation that not all unlogged
relations are reset.
Once that happend usage of unlogged relations could yield errors like
"could not open file "...": No such file or directory". Luckily
clusters that show the problem can be fixed by performing a immediate
shutdown, and starting the database again.
To fix, just call ResetUnloggedRelations(UNLOGGED_RELATION_INIT)
earlier, before marking the database as having successfully recovered.
Discussion: 20140912112246.GA4984@alap3.anarazel.de
Backpatch to 9.1 where unlogged tables were introduced.
Abhijit Menon-Sen and Andres Freund
This function has a loop which can lead to uninterruptible process
"stalls" (actually infinite loops) when some bugs are triggered. Avoid
that unpleasant situation by adding a check for interrupts in a place
that shouldn't degrade performance in the normal case.
Backpatch to 9.3. Older branches have an identical loop here, but the
aforementioned bugs are only a problem starting in 9.3 so there doesn't
seem to be any point in backpatching any further.
Fix breakage induced by commits d8d3d2a4f37f6df5d0118b7f5211978cca22091a
and 463f2625a5fb183b6a8925ccde98bb3889f921d9: pg_dumpall has crashed when
attempting to dump from pre-8.1 servers since then, due to faulty
construction of the query used for dumping roles from older servers.
The query was erroneous as of the earlier commit, but it wasn't exposed
unless you tried to use --binary-upgrade, which you presumably wouldn't
with a pre-8.1 server. However commit 463f2625a made it fail always.
In HEAD, also fix additional breakage induced in the same query by
commit 491c029dbc4206779cf659aa0ff986af7831d2ff, which evidently wasn't
tested against pre-8.1 servers either.
The bug is only latent in 9.1 because 463f2625a hadn't landed yet, but
it seems best to back-patch all branches containing the faulty query.
Gilles Darold
There was a window in RestoreBackupBlock where a page would be zeroed out,
but not yet locked. If a backend pinned and locked the page in that window,
it saw the zeroed page instead of the old page or new page contents, which
could lead to missing rows in a result set, or errors.
To fix, replace RBM_ZERO with RBM_ZERO_AND_LOCK, which atomically pins,
zeroes, and locks the page, if it's not in the buffer cache already.
In stable branches, the old RBM_ZERO constant is renamed to RBM_DO_NOT_USE,
to avoid breaking any 3rd party extensions that might use RBM_ZERO. More
importantly, this avoids renumbering the other enum values, which would
cause even bigger confusion in extensions that use ReadBufferExtended, but
haven't been recompiled.
Backpatch to all supported versions; this has been racy since hot standby
was introduced.
This only happens if a client issues a Parse message with an empty query
string, which is a bit odd; but since it is explicitly called out as legal
by our FE/BE protocol spec, we'd probably better continue to allow it.
Fix by adding tests everywhere that the raw_parse_tree field is passed to
functions that don't or shouldn't accept NULL. Also make it clear in the
relevant comments that NULL is an expected case.
This reverts commits a73c9dbab0165b3395dfe8a44a7dfd16166963c4 and
2e9650cbcff8c8fb0d9ef807c73a44f241822eee, which fixed specific crash
symptoms by hacking things at what now seems to be the wrong end, ie the
callee functions. Making the callees allow NULL is superficially more
robust, but it's not always true that there is a defensible thing for the
callee to do in such cases. The caller has more context and is better
able to decide what the empty-query case ought to do.
Per followup discussion of bug #11335. Back-patch to 9.2. The code
before that is sufficiently different that it would require development
of a separate patch, which doesn't seem worthwhile for what is believed
to be an essentially cosmetic change.
When the recursive search in dependency.c visits a column and then later
visits the whole table containing the column, it needs to propagate the
drop-context flags for the table to the existing target-object entry for
the column. Otherwise we might refuse the DROP (if not CASCADE) on the
incorrect grounds that there was no automatic drop pathway to the column.
Remarkably, this has not been reported before, though it's possible at
least when an extension creates both a datatype and a table using that
datatype.
Rather than just marking the column as allowed to be dropped, it might
seem good to skip the DROP COLUMN step altogether, since the later DROP
of the table will surely get the job done. The problem with that is that
the datatype would then be dropped before the table (since the whole
situation occurred because we visited the datatype, and then recursed to
the dependent column, before visiting the table). That seems pretty risky,
and the case is rare enough that it doesn't seem worth expending a lot of
effort or risk to make the drops happen in a safe order. So we just play
dumb and delete the column separately according to the existing drop
ordering rules.
Per report from Petr Jelinek, though this is different from his proposed
patch.
Back-patch to 9.1, where extensions were introduced. There's currently
no evidence that such cases can arise before 9.1, and in any case we would
also need to back-patch cb5c2ba2d82688d29b5902d86b993a54355cad4d to 9.0
if we wanted to back-patch this.
At one time it wasn't terribly important what column names were associated
with the fields of a composite Datum, but since the introduction of
operations like row_to_json(), it's important that looking up the rowtype
ID embedded in the Datum returns the column names that users would expect.
However, that doesn't work terribly well: you could get the column names
of the underlying table, or column aliases from any level of the query,
depending on minor details of the plan tree. You could even get totally
empty field names, which is disastrous for cases like row_to_json().
It seems unwise to change this behavior too much in stable branches,
however, since users might not have noticed that they weren't getting
the least-unintuitive choice of field names. Therefore, in the back
branches, only change the results when the child plan has returned an
actually-empty field name. (We assume that can't happen with a named
rowtype, so this also dodges the issue of possibly producing RECORD-typed
output from a Var with a named composite result type.) As in the sister
patch for HEAD, we can get a better name to use from the Var's
corresponding RTE. There is no need to touch the RowExpr code since it
was already using a copy of the RTE's alias list for RECORD cases.
Back-patch as far as 9.2. Before that we did not have row_to_json()
so there were no core functions potentially affected by bogus field
names. While 9.1 and earlier do have contrib's hstore(record) which
is also affected, those versions don't seem to produce empty field names
(at least not in the known problem cases), so we'll leave them alone.
dict_thesaurus stored phrase IDs in uint16 fields, so it would get confused
and even crash if there were more than 64K entries in the configuration
file. It turns out to be basically free to widen the phrase IDs to uint32,
so let's just do so.
This was complained of some time ago by David Boutin (in bug #7793);
he later submitted an informal patch but it was never acted on.
We now have another complaint (bug #11901 from Luc Ouellette) so it's
time to make something happen.
This is basically Boutin's patch, but for future-proofing I also added a
defense against too many words per phrase. Note that we don't need any
explicit defense against overflow of the uint32 counters, since before that
happens we'd hit array allocation sizes that repalloc rejects.
Back-patch to all supported branches because of the crash risk.
Previously .ready file was created for the timeline history file at the end
of an archive recovery even when WAL archiving was not enabled.
This creation is unnecessary and causes .ready file to remain infinitely.
This commit changes an archive recovery so that it creates .ready file for
the timeline history file only when WAL archiving is enabled.
Backpatch to all supported versions.
The previous coding assumed that we could just let buffers for the
database's old tablespace age out of the buffer arena naturally.
The folly of that is exposed by bug #11867 from Marc Munro: the user could
later move the database back to its original tablespace, after which any
still-surviving buffers would match lookups again and appear to contain
valid data. But they'd be missing any changes applied while the database
was in the new tablespace.
This has been broken since ALTER SET TABLESPACE was introduced, so
back-patch to all supported branches.
As noted by Noah Misch, my initial cut at fixing bug #11638 didn't cover
all cases where ANALYZE might be invoked in an unsafe context. We need to
test the result of IsInTransactionChain not IsTransactionBlock; which is
notationally a pain because IsInTransactionChain requires an isTopLevel
flag, which would have to be passed down through several levels of callers.
I chose to pass in_outer_xact (ie, the result of IsInTransactionChain)
rather than isTopLevel per se, as that seemed marginally more apropos
for the intermediate functions to know about.
VACUUM and ANALYZE update the target table's pg_class row in-place, that is
nontransactionally. This is OK, more or less, for the statistical columns,
which are mostly nontransactional anyhow. It's not so OK for the DDL hint
flags (relhasindex etc), which might get changed in response to
transactional changes that could still be rolled back. This isn't a
problem for VACUUM, since it can't be run inside a transaction block nor
in parallel with DDL on the table. However, we allow ANALYZE inside a
transaction block, so if the transaction had earlier removed the last
index, rule, or trigger from the table, and then we roll back the
transaction after ANALYZE, the table would be left in a corrupted state
with the hint flags not set though they should be.
To fix, suppress the hint-flag updates if we are InTransactionBlock().
This is safe enough because it's always OK to postpone hint maintenance
some more; the worst-case consequence is a few extra searches of pg_index
et al. There was discussion of instead using a transactional update,
but that would change the behavior in ways that are not all desirable:
in most scenarios we're better off keeping ANALYZE's statistical values
even if the ANALYZE itself rolls back. In any case we probably don't want
to change this behavior in back branches.
Per bug #11638 from Casey Shobe. This has been broken for a good long
time, so back-patch to all supported branches.
Tom Lane and Michael Paquier, initial diagnosis by Andres Freund
If you call PQreset() repeatedly, and the connection cannot be
re-established, the error messages from the failed connection attempts
kept accumulating in the error string.
Fixes bug #11455 reported by Caleb Epstein. Backpatch to all supported
versions.
1. The comparison for matching terms used only the CRC to decide if there's
a match. Two different terms with the same CRC gave a match.
2. It assumed that if the second operand has more terms than the first, it's
never a match. That assumption is bogus, because there can be duplicate
terms in either operand.
Rewrite the implementation in a way that doesn't have those bugs.
Backpatch to all supported versions.
Since we taught btree to handle ScalarArrayOpExpr quals natively (commit
9e8da0f75731aaa7605cf4656c21ea09e84d2eb1), the planner has always included
ScalarArrayOpExpr quals in index conditions if possible. However, if the
qual is for a non-first index column, this could result in an inferior plan
because we can no longer take advantage of index ordering (cf. commit
807a40c551dd30c8dd5a0b3bd82f5bbb1e7fd285). It can be better to omit the
ScalarArrayOpExpr qual from the index condition and let it be done as a
filter, so that the output doesn't need to get sorted. Indeed, this is
true for the query introduced as a test case by the latter commit.
To fix, restructure get_index_paths and build_index_paths so that we
consider paths both with and without ScalarArrayOpExpr quals in non-first
index columns. Redesign the API of build_index_paths so that it reports
what it found, saving useless second or third calls.
Report and patch by Andrew Gierth (though rather heavily modified by me).
Back-patch to 9.2 where this code was introduced, since the issue can
result in significant performance regressions compared to plans produced
by 9.1 and earlier.
Windows has one a locale whose name contains a non-ASCII character:
"Norwegian (Bokmål)" (that's an 'a' with a ring on top). That causes
trouble; when passing it setlocale(), it's not clear what encoding the
argument should be in. Another problem is that the locale name is stored in
pg_database catalog table, and the encoding used there depends on what
server encoding happens to be in use when the database is created. For
example, if you issue the CREATE DATABASE when connected to a UTF-8
database, the locale name is stored in pg_database in UTF-8. As long as all
locale names are pure ASCII, that's not a problem.
To work around that, map the troublesome locale name to a pure-ASCII alias
of the same locale, "norwegian-bokmal".
Now, this doesn't change the existing values that are already in
pg_database and in postgresql.conf. Old clusters will need to be fixed
manually. Instructions for that need to be put in the release notes.
This fixes bug #11431 reported by Alon Siman-Tov. Backpatch to 9.2;
backpatching further would require more work than seems worth it.
Don't crash if an ispell dictionary definition contains flags but not
any compound affixes. (This isn't a security issue since only superusers
can install affix files, but still it's a bad thing.)
Also, be more careful about detecting whether an affix-file FLAG command
is old-format (ispell) or new-format (myspell/hunspell). And change the
error message about mixed old-format and new-format commands into something
intelligible.
Per bug #11770 from Emre Hasegeli. Back-patch to all supported branches.
Previously the archive recovery always created .ready file for
the last WAL file of the old timeline at the end of recovery even when
it's restored from the archive and has .done file. That is, there was
the case where the WAL file had both .ready and .done files.
This caused the already-archived WAL file to be archived again.
This commit prevents the archive recovery from creating .ready file
for the last WAL file if it has .done file, in order to prevent it from
being archived again.
This bug was added when cascading replication feature was introduced,
i.e., the commit 5286105800c7d5902f98f32e11b209c471c0c69c.
So, back-patch to 9.2, where cascading replication was added.
Reviewed by Michael Paquier
The EOF-detection logic in pqReadData was a bit confused about who should
set up the error message in case the kernel gives us read-ready-but-no-data
rather than ECONNRESET or some other explicit error condition. Since the
whole point of this situation is that the lower-level functions don't know
there's anything wrong, pqReadData itself must set up the message. But
keep the assumption that if an errno was reported, a message was set up at
lower levels.
Per bug #11712 from Marko Tiikkaja. It's been like this for a very long
time, so back-patch to all supported branches.
CREATE DATABASE and ALTER DATABASE .. SET TABLESPACE copy the source
database directory on the filesystem level. To ensure the on disk
state is consistent they block out users of the affected database and
force a checkpoint to flush out all data to disk. Unfortunately, up to
now, that checkpoint didn't flush out dirty buffers from unlogged
relations.
That bug means there could be leftover dirty buffers in either the
template database, or the database in its old location. Leading to
problems when accessing relations in an inconsistent state; and to
possible problems during shutdown in the SET TABLESPACE case because
buffers belonging files that don't exist anymore are flushed.
This was reported in bug #10675 by Maxim Boguk.
Fix by Pavan Deolasee, modified somewhat by me. Reviewed by MauMau and
Fujii Masao.
Backpatch to 9.1 where unlogged tables were introduced.
If an inline-able SQL function taking a composite argument is used in a
LATERAL subselect, and the composite argument is a lateral reference,
the planner could fail with "variable not found in subplan target list",
as seen in bug #11703 from Karl Bartel. (The outer function call used in
the bug report and in the committed regression test is not really necessary
to provoke the bug --- you can get it if you manually expand the outer
function into "LATERAL (SELECT inner_function(outer_relation))", too.)
The cause of this is that we generate the reltargetlist for the referenced
relation before doing eval_const_expressions() on the lateral sub-select's
expressions (cf find_lateral_references()), so what's scheduled to be
emitted by the referenced relation is a whole-row Var, not the simplified
single-column Var produced by optimizing the function's FieldSelect on the
whole-row Var. Then setrefs.c fails to match up that lateral reference to
what's available from the outer scan.
Preserving the FieldSelect optimization in such cases would require either
major planner restructuring (to recursively do expression simplification
on sub-selects much earlier) or some amazingly ugly kluge to change the
reltargetlist of a possibly-already-planned relation. It seems better
just to skip the optimization when the Var is from an upper query level;
the case is not so common that it's likely anyone will notice a few
wasted cycles.
AFAICT this problem only occurs for uplevel LATERAL references, so
back-patch to 9.3 where LATERAL was added.
Follow our usual style of providing an "extern" for a standard library
function only when we're also providing the implementation. This avoids
issues when the system headers declare the function slightly differently
than we do, as noted by Caleb Welton.
We might have to go to the extent of probing to see if the system headers
declare the function, but let's not do that until it's demonstrated to be
necessary.
Oversight in commit 9e6b1bf258170e62dac555fc82ff0536dfe01d29. Back-patch
to all supported branches, as that was.
Nearly all Paths have parents, but a ResultPath representing an empty FROM
clause does not. Avoid a core dump in such cases. I believe this is only
a hazard for debugging usage, not for production, else we'd have heard
about it before. Nonetheless, back-patch to 9.1 where the troublesome code
was introduced. Noted while poking at bug #11703.
This reverts nearly all of commit 28f6cab61ab8958b1a7dfb019724687d92722538
in favor of just using the typrelid we already have in pg_dump's TypeInfo
struct for the composite type. As coded, it'd crash if the composite type
had no attributes, since then the query would return no rows.
Back-patch to all supported versions. It seems to not really be a problem
in 9.0 because that version rejects the syntax "create type t as ()", but
we might as well keep the logic similar in all affected branches.
Report and fix by Rushabh Lathia.
Up to now, PG has assumed that any given timezone abbreviation (such as
"EDT") represents a constant GMT offset in the usage of any particular
region; we had a way to configure what that offset was, but not for it
to be changeable over time. But, as with most things horological, this
view of the world is too simplistic: there are numerous regions that have
at one time or another switched to a different GMT offset but kept using
the same timezone abbreviation. Almost the entire Russian Federation did
that a few years ago, and later this month they're going to do it again.
And there are similar examples all over the world.
To cope with this, invent the notion of a "dynamic timezone abbreviation",
which is one that is referenced to a particular underlying timezone
(as defined in the IANA timezone database) and means whatever it currently
means in that zone. For zones that use or have used daylight-savings time,
the standard and DST abbreviations continue to have the property that you
can specify standard or DST time and get that time offset whether or not
DST was theoretically in effect at the time. However, the abbreviations
mean what they meant at the time in question (or most recently before that
time) rather than being absolutely fixed.
The standard abbreviation-list files have been changed to use this behavior
for abbreviations that have actually varied in meaning since 1970. The
old simple-numeric definitions are kept for abbreviations that have not
changed, since they are a bit faster to resolve.
While this is clearly a new feature, it seems necessary to back-patch it
into all active branches, because otherwise use of Russian zone
abbreviations is going to become even more problematic than it already was.
This change supersedes the changes in commit 513d06ded et al to modify the
fixed meanings of the Russian abbreviations; since we've not shipped that
yet, this will avoid an undesirably incompatible (not to mention incorrect)
change in behavior for timestamps between 2011 and 2014.
This patch makes some cosmetic changes in ecpglib to keep its usage of
datetime lookup tables as similar as possible to the backend code, but
doesn't do anything about the increasingly obsolete set of timezone
abbreviation definitions that are hard-wired into ecpglib. Whatever we
do about that will likely not be appropriate material for back-patching.
Also, a potential free() of a garbage pointer after an out-of-memory
failure in ecpglib has been fixed.
This patch also fixes pre-existing bugs in DetermineTimeZoneOffset() that
caused it to produce unexpected results near a timezone transition, if
both the "before" and "after" states are marked as standard time. We'd
only ever thought about or tested transitions between standard and DST
time, but that's not what's happening when a zone simply redefines their
base GMT offset.
In passing, update the SGML documentation to refer to the Olson/zoneinfo/
zic timezone database as the "IANA" database, since it's now being
maintained under the auspices of IANA.
This file used __int64, which is specific to native Windows, rather than
int64. Suppress the long-unused union field of this type. Noticed on
Cygwin x86_64 with -lcrypt not installed. Back-patch to 9.0 (all
supported versions).
The code wrote a value into the caller's field[] array before checking
to see if there was room, which of course is backwards. Per report from
Michael Paquier.
I fixed the equivalent bug in the backend's version of this code way back
in 630684d3a130bb93, but failed to think about ecpg's copy. Fortunately
this doesn't look like it would be exploitable for anything worse than a
core dump: an external attacker would have no control over the single word
that gets written.
Before version 9.4, we didn't require sprintf to support the %z length
modifier. Use %lu instead.
Reported by Peter Eisentraut. Apply to 9.3 and earlier.
Most zones in the Russian Federation are subtracting one or two hours
as of 2014-10-26. Update the meanings of the abbreviations IRKT, KRAT,
MAGT, MSK, NOVT, OMST, SAKT, VLAT, YAKT, YEKT to match.
The IANA timezone database has adopted abbreviations of the form AxST/AxDT
for all Australian time zones, reflecting what they believe to be current
majority practice Down Under. These names do not conflict with usage
elsewhere (other than ACST for Acre Summer Time, which has been in disuse
since 1994). Accordingly, adopt these names into our "Default" timezone
abbreviation set. The "Australia" abbreviation set now contains only
CST,EAST,EST,SAST,SAT,WST, all of which are thought to be mostly historical
usage. Note that SAST has also been changed to be South Africa Standard
Time in the "Default" abbreviation set.
Add zone abbreviations SRET (Asia/Srednekolymsk) and XJT (Asia/Urumqi),
and use WSST/WSDT for western Samoa.
Also a DST law change in the Turks & Caicos Islands (America/Grand_Turk),
and numerous corrections for historical time zone data.
This updates known_abbrevs.txt to be what it should have been already,
were my -P patch not broken; and updates some tznames/ entries that
missed getting any love in previous timezone data updates because zic
failed to flag the change of abbreviation.
The non-cosmetic updates:
* Remove references to "ADT" as "Arabia Daylight Time", an abbreviation
that's been out of use since 2007; therefore, claiming there is a conflict
with "Atlantic Daylight Time" doesn't seem especially helpful. (We have
left obsolete entries in the files when they didn't conflict with anything,
but that seems like a different situation.)
* Fix entirely incorrect GMT offsets for CKT (Cook Islands), FJT, FJST
(Fiji); we didn't even have them on the proper side of the date line.
(Seems to have been aboriginal errors in our tznames data; there's no
evidence anything actually changed recently.)
* FKST (Falkland Islands Summer Time) is now used all year round, so
don't mark it as a DST abbreviation.
* Update SAKT (Sakhalin) to mean GMT+11 not GMT+10.
In cosmetic changes, I fixed a bunch of wrong (or at least obsolete)
claims about abbreviations not being present in the zic files, and
tried to be consistent about how obsolete abbreviations are labeled.
Note the underlying timezone/data files are still at release 2014e;
this is just trying to get us in sync with what those files actually
say before we go to the next update.
The quick hack I added to zic to dump out currently-in-use timezone
abbreviations turns out to have a nasty bug: within each zone, it was
printing the last "struct ttinfo" to be *defined*, not necessarily the
last one in use. This was mainly a problem in zones that had changed the
meaning of their zone abbreviation (to another GMT offset value) and later
changed it back.
As a result of this error, we'd missed out updating the tznames/ files
for some jurisdictions that have changed their zone abbreviations since
the tznames/ files were originally created. I'll address the missing data
updates in a separate commit.
When there are cost-delay-related storage options set for a table,
trying to make that table participate in the autovacuum cost-limit
balancing algorithm produces undesirable results: instead of using the
configured values, the global values are always used,
as illustrated by Mark Kirkwood in
http://www.postgresql.org/message-id/52FACF15.8020507@catalyst.net.nz
Since the mechanism is already complicated, just disable it for those
cases rather than trying to make it cope. There are undesirable
side-effects from this too, namely that the total I/O impact on the
system will be higher whenever such tables are vacuumed. However, this
is seen as less harmful than slowing down vacuum, because that would
cause bloat to accumulate. Anyway, in the new system it is possible to
tweak options to get the precise behavior one wants, whereas with the
previous system one was simply hosed.
This has been broken forever, so backpatch to all supported branches.
This might affect systems where cost_limit and cost_delay have been set
for individual tables.
The page splitting code would go into infinite recursion if you try to
insert an index tuple that doesn't fit even on an empty page.
Per analysis and suggested fix by Andrew Gierth. Fixes bug #11555, reported
by Bryan Seitz (analysis happened over IRC). Backpatch to all supported
versions.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
DetermineSleepTime() was previously called without blocked
signals. That's not good, because it allows signal handlers to
interrupt its workings.
DetermineSleepTime() was added in 9.3 with the addition of background
workers (da07a1e856511), where it only read from
BackgroundWorkerList.
Since 9.4, where dynamic background workers were added (7f7485a0cde),
the list is also manipulated in DetermineSleepTime(). That's bad
because the list now can be persistently corrupted if modified by both
a signal handler and DetermineSleepTime().
This was discovered during the investigation of hangs on buildfarm
member anole. It's unclear whether this bug is the source of these
hangs or not, but it's worth fixing either way. I have confirmed that
it can cause crashes.
It luckily looks like this only can cause problems when bgworkers are
actively used.
Discussion: 20140929193733.GB14400@awork2.anarazel.de
Backpatch to 9.3 where background workers were introduced.
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Robert Haas and Tom Lane
Some compilers don't automatically search the current directory for
included files. 9cc2c182fc2 fixed that for builds from tarballs by
adding an include to the source directory. But that doesn't work when
the scanner is generated in the VPATH directory. Use the same search
path as the other parsers in the tree.
One compiler that definitely was affected is solaris' sun cc.
Backpatch to 9.1 which introduced using an actual parser for
replication commands.
When the number of allowed iterations is limited (either a "?" quantifier
or a bound expression), the last sub-match has to reach to the end of the
target string. The previous coding here first tried the shortest possible
match (one character, usually) and then gave up and back-tracked if that
didn't work, typically leading to failure to match overall, as shown in
bug #11478 from Christoph Berg. The minimum change to fix that would be to
not decrement k before "goto backtrack"; but that would be a pretty stupid
solution, because we'd laboriously try each possible sub-match length
before finally discovering that only ending at the end can work. Instead,
force the sub-match endpoint limit up to the end for even the first
shortest() call if we cannot have any more sub-matches after this one.
Bug introduced in my rewrite that added the iterdissect logic, commit
173e29aa5deefd9e71c183583ba37805c8102a72. The shortest-first search code
was too closely modeled on the longest-first code, which hasn't got this
issue since it tries a match reaching to the end to start with anyway.
Back-patch to all affected branches.
x86's memory barrier assembly was marked as clobbering "memory" but
not "cc" even though 'addl' sets various flags. As it turns out gcc on
x86 implicitly assumes "cc" on every inline assembler statement, so
it's not a bug. But as that's poorly documented and might get copied
to architectures or compilers where that's not the case, it seems
better to be precise.
Discussion: 20140919100016.GH4277@alap3.anarazel.de
To keep the code common, backpatch to 9.2 where explicit memory
barriers were introduced.
In psql, expanded mode was not being displayed correctly when using
the normal ascii or unicode linestyles and border set to '3'. Now,
per the documentation, border '3' is really only sensible for HTML
and LaTeX formats, however, that's no excuse for ascii/unicode to
break in that case, and provisions had been made for psql to cleanly
handle this case (and it did, in non-expanded mode).
This was broken when ascii/unicode was initially added a good five
years ago because print_aligned_vertical_line wasn't passed in the
border setting being used by print_aligned_vertical but instead was
given the whole printTableContent. There really isn't a good reason
for vertical_line to have the entire printTableContent structure, so
just pass in the printTextFormat and border setting (similar to how
this is handled in horizontal_line).
Pointed out by Pavel Stehule, fix by me.
Back-patch to all currently-supported versions.
