This supplements the GNU libc bug #6530 workarounds introduced in commit
54cd4f0457. On affected systems, a
tar-format pg_basebackup failed when some filename beneath the data
directory was not valid character data in the postmaster/walsender
locale. Back-patch to 9.1, where pg_basebackup was introduced. Extant,
bug-prone conversion specifications receive only ASCII bytes or involve
low-importance messages.
Previously autovacuum was not necessarily triggered if space in the
members slru got tight. The first problem was that the signalling was
tied to values in the offsets slru, but members can advance much
faster. Thats especially a problem if old sessions had been around that
previously prevented the multixact horizon to increase. Secondly the
skipping logic doesn't work if the database was restarted after
autovacuum was triggered - that knowledge is not preserved across
restart. This is especially a problem because it's a common
panic-reaction to restart the database if it gets slow to
anti-wraparound vacuums.
Fix the first problem by separating the logic for members from
offsets. Trigger autovacuum whenever a multixact crosses a segment
boundary, as the current member offset increases in irregular values, so
we can't use a simple modulo logic as for offsets. Add a stopgap for
the second problem, by signalling autovacuum whenver ERRORing out
because of boundaries.
Discussion: 20150608163707.GD20772@alap3.anarazel.de
Backpatch into 9.3, where it became more likely that multixacts wrap
around.
9a20a9b2 added a new elog(), enabled when WAL_DEBUG is defined. The
other WAL_DEBUG dependant messages check for the wal_debug GUC, but this
one did not. While at it replace 'upto' with 'up to'.
Discussion: 20150610110253.GF3832@alap3.anarazel.de
Backpatch to 9.4, the first release containing 9a20a9b2.
POSIX permits setlocale() calls to invalidate any previous setlocale()
return values, but commit 5f538ad004
neglected to account for setlocale(LC_CTYPE, NULL) doing so. The effect
was to set the LC_CTYPE environment variable to an unintended value.
pg_perm_setlocale() sets this variable to assist PL/Perl; without it,
Perl would undo PostgreSQL's locale settings. The known-affected
configurations are 32-bit, release builds using Visual Studio 2012 or
Visual Studio 2013. Visual Studio 2010 is unaffected, as were all
buildfarm-attested configurations. In principle, this bug could leave
the wrong LC_CTYPE in effect after PL/Perl use, which could in turn
facilitate problems like corrupt tsvector datums. No known platform
experiences that consequence, because PL/Perl on Windows does not use
this environment variable.
The bug has been user-visible, as early postmaster failure, on systems
with Windows ANSI code page set to CP936 for "Chinese (Simplified, PRC)"
and probably on systems using other multibyte code pages.
(SetEnvironmentVariable() rejects values containing character data not
valid under the Windows ANSI code page.) Back-patch to 9.4, where the
faulty commit first appeared.
Reported by Didi Hu and 林鹏程. Reviewed by Tom Lane, though this fix
strategy was not his first choice.
This adjusts commit 82233ce7ea so that the
postmaster does not exit until all its child processes have exited, even
if the 5-second timeout elapses and we have to send SIGKILL. There is no
great value in having the postmaster process quit sooner, and doing so can
mislead onlookers into thinking that the cluster is fully terminated when
actually some child processes still survive.
This effect might explain recent test failures on buildfarm member hamster,
wherein we failed to restart a cluster just after shutting it down with
"pg_ctl stop -m immediate".
I also did a bit of code review/beautification, including fixing a faulty
use of the Max() macro on a volatile expression.
Back-patch to 9.4. In older branches, the postmaster never waited for
children to exit during immediate shutdowns, and changing that would be
too much of a behavioral change.
This avoids the problem that it might go to sleep for an unreasonable
amount of time in unusual conditions like the server clock moving
backwards an unreasonable amount of time.
(Simply moving the server clock forward again doesn't solve the problem
unless you wake up the autovacuum launcher manually, say by sending it
SIGHUP).
Per trouble report from Prakash Itnal in
https://www.postgresql.org/message-id/CAHC5u79-UqbapAABH2t4Rh2eYdyge0Zid-X=Xz-ZWZCBK42S0Q@mail.gmail.com
Analyzed independently by Haribabu Kommi and Tom Lane.
Since find_multixact_start() relies on SimpleLruDoesPhysicalPageExist(),
and that function looks only at the on-disk state, it's possible for it
to fail to find a page that exists in the in-memory SLRU that has not
been written yet. If that happens, SetOffsetVacuumLimit() will
erroneously decide to force emergency autovacuuming immediately.
We should probably fix find_multixact_start() to consider the data
cached in memory as well as on the on-disk state, but that's no excuse
for SetOffsetVacuumLimit() to be stupid about the case where it can
no longer read the value after having previously succeeded in doing so.
Report by Andres Freund.
We already tried to improve this once, but the "improved" text was rather
off-target if you had provided a USING clause. Also, it seems helpful
to provide the exact text of a suggested USING clause, so users can just
copy-and-paste it when needed. Per complaint from Keith Rarick and a
suggestion from Merlin Moncure.
Back-patch to 9.2 where the current wording was adopted.
We don't know why a few Windows users have seen this fail, but the
taciturnity of the error message certainly isn't helping debug it.
Let's at least find out which LC category isn't working.
HotStandbyActiveInReplay, introduced in 061b079f, only allowed WAL
replay to happen in the startup process, missing the single user case.
This buglet is fairly harmless as it only causes problems when single
user mode in an assertion enabled build is used to replay a btree vacuum
record.
Backpatch to 9.2. 061b079f was backpatched further, but the assertion
was not.
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 7863404417), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
We should set MyProc->databaseId after acquiring the per-database lock,
not beforehand. The old way risked deadlock against processes trying to
copy or delete the target database, since they would first acquire the lock
and then wait for processes with matching databaseId to exit; that left a
window wherein an incoming process could set its databaseId and then block
on the lock, while the other process had the lock and waited in vain for
the incoming process to exit.
CountOtherDBBackends() would time out and fail after 5 seconds, so this
just resulted in an unexpected failure not a permanent lockup, but it's
still annoying when it happens. A real-world example of a use-case is that
short-duration connections to a template database should not cause CREATE
DATABASE to fail.
Doing it in the other order should be fine since the contract has always
been that processes searching the ProcArray for a database ID must hold the
relevant per-database lock while searching. Thus, this actually removes
the former race condition that required an assumption that storing to
MyProc->databaseId is atomic.
It's been like this for a long time, so back-patch to all active branches.
Recent commits, mainly b69bf30b9b and
53bb309d2d, introduced mechanisms to
protect against wraparound of the MultiXact member space: the number
of multixacts that can exist at one time is limited to 2^32, but the
total number of members in those multixacts is also limited to 2^32,
and older code did not take care to enforce the second limit,
potentially allowing old data to be overwritten while it was still
needed.
Unfortunately, these new mechanisms failed to account for the fact
that the code paths in which they run might be executed during
recovery or while the cluster was in an inconsistent state. Also,
they failed to account for the fact that users who used pg_upgrade
to upgrade a PostgreSQL version between 9.3.0 and 9.3.4 might have
might oldestMultiXid = 1 in the control file despite the true value
being larger.
To fix these problems, first, avoid unnecessarily examining the
mmembers of MultiXacts when the cluster is not known to be consistent.
TruncateMultiXact has done this for a long time, and this patch does
not fix that. But the new calls used to prevent member wraparound
are not needed until we reach normal running, so avoid calling them
earlier. (SetMultiXactIdLimit is actually called before InRecovery
is set, so we can't rely on that; we invent our own multixact-specific
flag instead.)
Second, make failure to look up the members of a MultiXact a non-fatal
error. Instead, if we're unable to determine the member offset at
which wraparound would occur, postpone arming the member wraparound
defenses until we are able to do so. If we're unable to determine the
member offset that should force autovacuum, force it continuously
until we are able to do so. If we're unable to deterine the member
offset at which we should truncate the members SLRU, log a message and
skip truncation.
An important consequence of these changes is that anyone who does have
a bogus oldestMultiXid = 1 value in pg_control will experience
immediate emergency autovacuuming when upgrading to a release that
contains this fix. The release notes should highlight this fact. If
a user has no pg_multixact/offsets/0000 file, but has oldestMultiXid = 1
in the control file, they may wish to vacuum any tables with
relminmxid = 1 prior to upgrading in order to avoid an immediate
emergency autovacuum after the upgrade. This must be done with a
PostgreSQL version 9.3.5 or newer and with vacuum_multixact_freeze_min_age
and vacuum_multixact_freeze_table_age set to 0.
This patch also adds an additional log message at each database server
startup, indicating either that protections against member wraparound
have been engaged, or that they have not. In the latter case, once
autovacuum has advanced oldestMultiXid to a sane value, the message
indicating that the guards have been engaged will appear at the next
checkpoint. A few additional messages have also been added at the DEBUG1
level so that the correct operation of this code can be properly audited.
Along the way, this patch fixes another, related bug in TruncateMultiXact
that has existed since PostgreSQL 9.3.0: when no MultiXacts exist at
all, the truncation code looks up NextMultiXactId, which doesn't exist
yet. This can lead to TruncateMultiXact removing every file in
pg_multixact/offsets instead of keeping one around, as it should.
This in turn will cause the database server to refuse to start
afterwards.
Patch by me. Review by Álvaro Herrera, Andres Freund, Noah Misch, and
Thomas Munro.
This file has been patched over and over, and the differences to master
caused by pgindent are annoying enough that it seems saner to make the
older branches look the same.
Backpatch to 9.3, which is as far back as backpatching of bugfixes is
necessary.
- Correct the name of directory which those catalog columns allow to be shrunk.
- Correct the name of symbol which is used as the value of pg_class.relminmxid
when the relation is not a table.
- Fix "ID ID" typo.
Backpatch to 9.3 where those cataog columns were introduced.
When the inner side of a nestloop SEMI or ANTI join is an indexscan that
uses all the join clauses as indexquals, it can be presumed that both
matched and unmatched outer rows will be processed very quickly: for
matched rows, we'll stop after fetching one row from the indexscan, while
for unmatched rows we'll have an indexscan that finds no matching index
entries, which should also be quick. The planner already knew about this,
but it was nonetheless charging for at least one full run of the inner
indexscan, as a consequence of concerns about the behavior of materialized
inner scans --- but those concerns don't apply in the fast case. If the
inner side has low cardinality (many matching rows) this could make an
indexscan plan look far more expensive than it actually is. To fix,
rearrange the work in initial_cost_nestloop/final_cost_nestloop so that we
don't add the inner scan cost until we've inspected the indexquals, and
then we can add either the full-run cost or just the first tuple's cost as
appropriate.
Experimentation with this fix uncovered another problem: add_path and
friends were coded to disregard cheap startup cost when considering
parameterized paths. That's usually okay (and desirable, because it thins
the path herd faster); but in this fast case for SEMI/ANTI joins, it could
result in throwing away the desired plain indexscan path in favor of a
bitmap scan path before we ever get to the join costing logic. In the
many-matching-rows cases of interest here, a bitmap scan will do a lot more
work than required, so this is a problem. To fix, add a per-relation flag
consider_param_startup that works like the existing consider_startup flag,
but applies to parameterized paths, and set it for relations that are the
inside of a SEMI or ANTI join.
To make this patch reasonably safe to back-patch, care has been taken to
avoid changing the planner's behavior except in the very narrow case of
SEMI/ANTI joins with inner indexscans. There are places in
compare_path_costs_fuzzily and add_path_precheck that are not terribly
consistent with the new approach, but changing them will affect planner
decisions at the margins in other cases, so we'll leave that for a
HEAD-only fix.
Back-patch to 9.3; before that, the consider_startup flag didn't exist,
meaning that the second aspect of the patch would be too invasive.
Per a complaint from Peter Holzer and analysis by Tomas Vondra.
Also sneak entries for commits 97ff2a564 et al into the sections for
the previous releases in the relevant branches. Those fixes did go out
in the previous releases, but missed getting documented.
The fsync code from the backend essentially assumes that somebody's already
validated PGDATA, at least to the extent of it being a readable directory.
That's safe enough for initdb's normal code path too, but "initdb -S"
doesn't have any other processing at all that touches the target directory.
To have reasonable error-case behavior, add a pg_check_dir call.
Per gripe from Peter E.
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
Make initdb's version of this logic look as much like the backend's
as possible. This is much less critical than in the backend since not
so many people use "initdb -S", but we want the same corner-case error
handling in both cases.
Back-patch to 9.3 where initdb -S option was introduced. Before that,
initdb only had to deal with freshly-created data directories, wherein
no failures should be expected.
Abhijit Menon-Sen
Commit 2ce439f337 introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
Seems to have been an oversight in the original leakproofness patch.
Per report and patch from Jeevan Chalke.
In passing, prettify some awkward leakproof-related code in AlterFunction.
specparse.y and specscanner.l used "string" as a token name. Now, bison
likes to define each token name as a macro for the token code it assigns,
which means those names are basically off-limits for any other use within
the grammar file or included headers. So names as generic as "string" are
dangerous. This is what was causing the recent failures on protosciurus:
some versions of Solaris' sys/kstat.h use "string" as a field name.
With late-model bison we don't see this problem because the token macros
aren't defined till later (that is why castoroides didn't show the problem
even though it's on the same machine). But protosciurus uses bison 1.875
which defines the token macros up front.
This land mine has been there from day one; we'd have found it sooner
except that protosciurus wasn't trying to run the isolation tests till
recently.
To fix, rename the token to "string_literal" which is hopefully less
likely to collide with names used by system headers. Back-patch to
all branches containing the isolation tests.
According to recent tests, this case now works fine, so there's no reason
to reject it anymore. (Even if there are still some OpenBSD platforms
in the wild where it doesn't work, removing the check won't break any case
that worked before.)
We can actually remove the entire test that discovers whether libpython
is threaded, since without the OpenBSD case there's no need to know that
at all.
Per report from Davin Potts. Back-patch to all active branches.
Commit 9b74f32cdb did this for objects of
type jbvBinary, but in trying further to simplify some of the new jsonb
code I discovered that objects of type jbvObject or jbvArray passed as
WJB_ELEM or WJB_VALUE also caused problems. These too are now added
component by component.
Backpatch to 9.4.
Multixact truncation is now handled differently, and this file hadn't
gotten the memo.
Per note from Amit Langote. I didn't use his patch, though.
Also update the description of infomask bits, which weren't completely up
to date either. This commit also propagates b01a4f6838 back to 9.3 and
9.4, which apparently I failed to do back then.
The name objectType is widely used as a field name, and it's pure luck that
this conflict has not caused pgindent to go crazy before. It messed up
pg_audit.c pretty good though. Since pg_shdepend.c doesn't export this
typedef and only uses it in three places, changing that seems saner than
changing the field usages.
Back-patch because we're contemplating using the union of all branch
typedefs for future pgindent runs, so this won't fix anything if it
stays the same in back branches.
pushJsonbValue was accepting jbvBinary objects passed as WJB_ELEM or
WJB_VALUE data. While this succeeded, when those objects were later
encountered in attempting to convert the result to Jsonb, errors
occurred. With this change we ghuarantee that a JSonbValue constructed
from calls to pushJsonbValue does not contain any jbvBinary objects.
This cures a problem observed with jsonb_delete.
This means callers of pushJsonbValue no longer need to perform this
unpacking themselves. A subsequent patch will perform some cleanup in
that area.
The error was not triggered by any 9.4 code, but this is a publicly
visible routine, and so the error could be exercised by third party
code, therefore backpatch to 9.4.
Bug report from Peter Geoghegan, fix by me.
This reverts commit 16304a0134, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
The point of the assertion is to ensure that the arrays allocated in stack
are large enough, but the check was one item short.
This won't matter in practice because MaxIndexTuplesPerPage is an
overestimate, so you can't have that many items on a page in reality.
But let's be tidy.
Spotted by Anastasia Lubennikova. Backpatch to all supported versions, like
the patch that added the assertion.
This has been the predominant outcome. When the output of decrypting
with a wrong key coincidentally resembled an OpenPGP packet header,
pgcrypto could instead report "Corrupt data", "Not text data" or
"Unsupported compression algorithm". The distinct "Corrupt data"
message added no value. The latter two error messages misled when the
decrypted payload also exhibited fundamental integrity problems. Worse,
error message variance in other systems has enabled cryptologic attacks;
see RFC 4880 section "14. Security Considerations". Whether these
pgcrypto behaviors are likewise exploitable is unknown.
In passing, document that pgcrypto does not resist side-channel attacks.
Back-patch to 9.0 (all supported versions).
Security: CVE-2015-3167
PostgreSQL already checked the vast majority of these, missing this
handful that nearly cannot fail. If putenv() failed with ENOMEM in
pg_GSS_recvauth(), authentication would proceed with the wrong keytab
file. If strftime() returned zero in cache_locale_time(), using the
unspecified buffer contents could lead to information exposure or a
crash. Back-patch to 9.0 (all supported versions).
Other unchecked calls to these functions, especially those in frontend
code, pose negligible security concern. This patch does not address
them. Nonetheless, it is always better to check return values whose
specification provides for indicating an error.
In passing, fix an off-by-one error in strftime_win32()'s invocation of
WideCharToMultiByte(). Upon retrieving a value of exactly MAX_L10N_DATA
bytes, strftime_win32() would overrun the caller's buffer by one byte.
MAX_L10N_DATA is chosen to exceed the length of every possible value, so
the vulnerable scenario probably does not arise.
Security: CVE-2015-3166
All known standard library implementations of these functions can fail
with ENOMEM. A caller neglecting to check for failure would experience
missing output, information exposure, or a crash. Check return values
within wrappers and code, currently just snprintf.c, that bypasses the
wrappers. The wrappers do not return after an error, so their callers
need not check. Back-patch to 9.0 (all supported versions).
Popular free software standard library implementations do take pains to
bypass malloc() in simple cases, but they risk ENOMEM for floating point
numbers, positional arguments, large field widths, and large precisions.
No specification demands such caution, so this commit regards every call
to a printf family function as a potential threat.
Injecting the wrappers implicitly is a compromise between patch scope
and design goals. I would prefer to edit each call site to name a
wrapper explicitly. libpq and the ECPG libraries would, ideally, convey
errors to the caller rather than abort(). All that would be painfully
invasive for a back-patched security fix, hence this compromise.
Security: CVE-2015-3166
Reentering this function with the right timing caused a double free,
typically crashing the backend. By synchronizing a disconnection with
the authentication timeout, an unauthenticated attacker could achieve
this somewhat consistently. Call be_tls_close() solely from within
proc_exit_prepare(). Back-patch to 9.0 (all supported versions).
Benkocs Norbert Attila
Security: CVE-2015-3165
