The trouble with doing this is that an apparently-constant subquery
output column isn't really constant if it is a grouping column that
appears in only some of the grouping sets. A qual using such a
column would be subject to incorrect const-folding after push-down,
as seen in bug #16585 from Paul Sivash.
To fix, just disable qual pushdown altogether if the sub-query has
nonempty groupingSets. While we could imagine far less restrictive
solutions, there is not much point in working harder right now,
because subquery_planner() won't move HAVING clauses to WHERE within
such a subquery. If the qual stays in HAVING it's not going to be
a lot more useful than if we'd kept it at the outer level.
Having said that, this restriction could be removed if we used a
parsetree representation that distinguished such outputs from actual
constants, which is something I hope to do in future. Hence, make
the patch a minimal addition rather than integrating it more tightly
(e.g. by renumbering the existing items in subquery_is_pushdown_safe's
comment).
Back-patch to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/16585-9d8c340d23ade8c1@postgresql.org
If a CREATE TABLE command uses both LIKE and traditional inheritance,
Vars in CHECK constraints and expression indexes that are absorbed
from a LIKE parent table tended to get mis-numbered, resulting in
wrong answers and/or bizarre error messages (though probably not any
actual crashes, thanks to validation occurring in the executor).
In v12 and up, the same could happen to Vars in GENERATED expressions,
even in cases with no LIKE clause but multiple traditional-inheritance
parents.
The cause of the problem for LIKE is that parse_utilcmd.c supposed
it could renumber such Vars correctly during transformCreateStmt(),
which it cannot since we have not yet accounted for columns added via
inheritance. Fix that by postponing processing of LIKE INCLUDING
CONSTRAINTS, DEFAULTS, GENERATED, INDEXES till after we've performed
DefineRelation().
The error with GENERATED and multiple inheritance is a simple oversight
in MergeAttributes(); it knows it has to renumber Vars in inherited
CHECK constraints, but forgot to apply the same processing to inherited
GENERATED expressions (a/k/a defaults).
Per bug #16272 from Tom Gottfried. The non-GENERATED variants of the
issue are ancient, presumably dating right back to the addition of
CREATE TABLE LIKE; hence back-patch to all supported branches.
Discussion: https://postgr.es/m/16272-6e32da020e9a9381@postgresql.org
Several PGXN modules reference LockTagType values; renumbering would
force a recompile of those modules. Oversight in back-patch of today's
commit 566372b3d6435639e4cc4476d79b8505a0297c87. Back-patch to released
branches, v12 through 9.5.
Reported by Tom Lane.
Discussion: https://postgr.es/m/921383.1597523945@sss.pgh.pa.us
The SimpleLruTruncate() header comment states the new coding rule. To
achieve this, add locktype "frozenid" and two LWLocks. This closes a
rare opportunity for data loss, which manifested as "apparent
wraparound" or "could not access status of transaction" errors. Data
loss is more likely in pg_multixact, due to released branches' thin
margin between multiStopLimit and multiWrapLimit. If a user's physical
replication primary logged ": apparent wraparound" messages, the user
should rebuild standbys of that primary regardless of symptoms. At less
risk is a cluster having emitted "not accepting commands" errors or
"must be vacuumed" warnings at some point. One can test a cluster for
this data loss by running VACUUM FREEZE in every database. Back-patch
to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20190218073103.GA1434723@rfd.leadboat.com
nodeSubplan.c expects that the testexpr for a hashable ANY SubPlan
has the form of one or more OpExprs whose LHS is an expression of the
outer query's, while the RHS is an expression over Params representing
output columns of the subquery. However, the planner only went as far
as verifying that the clauses were all binary OpExprs. This works
99.99% of the time, because the clauses have the right shape when
emitted by the parser --- but it's possible for function inlining to
break that, as reported by PegoraroF10. To fix, teach the planner
to check that the LHS and RHS contain the right things, or more
accurately don't contain the wrong things. Given that this has been
broken for years without anyone noticing, it seems sufficient to just
give up hashing when it happens, rather than go to the trouble of
commuting the clauses back again (which wouldn't necessarily work
anyway).
While poking at that, I also noticed that nodeSubplan.c had a baked-in
assumption that the number of hash clauses is identical to the number
of subquery output columns. Again, that's fine as far as parser output
goes, but it's not hard to break it via function inlining. There seems
little reason for that assumption though --- AFAICS, the only thing
it's buying us is not having to store the number of hash clauses
explicitly. Adding code to the planner to reject such cases would take
more code than getting nodeSubplan.c to cope, so I fixed it that way.
This has been broken for as long as we've had hashable SubPlans,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/1549209182255-0.post@n3.nabble.com
Up to now, upon receipt of a SIGTERM ("smart shutdown" command), the
postmaster has immediately killed all "optional" background processes,
and subsequently refused to launch new ones while it's waiting for
foreground client processes to exit. No doubt this seemed like an OK
policy at some point; but it's a pretty bad one now, because it makes
for a seriously degraded environment for the remaining clients:
* Parallel queries are killed, and new ones fail to launch. (And our
parallel-query infrastructure utterly fails to deal with the case
in a reasonable way --- it just hangs waiting for workers that are
not going to arrive. There is more work needed in that area IMO.)
* Autovacuum ceases to function. We can tolerate that for awhile,
but if bulk-update queries continue to run in the surviving client
sessions, there's eventually going to be a mess. In the worst case
the system could reach a forced shutdown to prevent XID wraparound.
* The bgwriter and walwriter are also stopped immediately, likely
resulting in performance degradation.
Hence, let's rearrange things so that the only immediate change in
behavior is refusing to let in new normal connections. Once the last
normal connection is gone, shut everything down as though we'd received
a "fast" shutdown. To implement this, remove the PM_WAIT_BACKUP and
PM_WAIT_READONLY states, instead staying in PM_RUN or PM_HOT_STANDBY
while normal connections remain. A subsidiary state variable tracks
whether or not we're letting in new connections in those states.
This also allows having just one copy of the logic for killing child
processes in smart and fast shutdown modes. I moved that logic into
PostmasterStateMachine() by inventing a new state PM_STOP_BACKENDS.
Back-patch to 9.6 where parallel query was added. In principle
this'd be a good idea in 9.5 as well, but the risk/reward ratio
is not as good there, since lack of autovacuum is not a problem
during typical uses of smart shutdown.
Per report from Bharath Rupireddy.
Patch by me, reviewed by Thomas Munro
Discussion: https://postgr.es/m/CALj2ACXAZ5vKxT9P7P89D87i3MDO9bfS+_bjMHgnWJs8uwUOOw@mail.gmail.com
When a table is scanned by heapam_index_build_range_scan (née
IndexBuildHeapScan) and the table lock being held allows concurrent data
changes, it is possible for new HOT chains to sprout in a page that were
unknown when the scan of a page happened. This leads to an error such
as
ERROR: failed to find parent tuple for heap-only tuple at (X,Y) in table "tbl"
because the root tuple was not present when we first obtained the list
of the page's root tuples. This can be fixed by re-obtaining the list
of root tuples, if we see that a heap-only tuple appears to point to a
non-existing root.
This was reported by Anastasia as occurring for BRIN summarization
(which exists since 9.5), but I think it could theoretically also happen
with CREATE INDEX CONCURRENTLY (much older) or REINDEX CONCURRENTLY
(very recent). It seems a happy coincidence that BRIN forces us to
backpatch this all the way to 9.5.
Reported-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/602d8487-f0b2-5486-0088-0f372b2549fa@postgrespro.ru
Backpatch: 9.5 - master
If a page range is desummarized at just the right time concurrently with
an index walk, BRIN would raise an error indicating index corruption.
This is scary and unhelpful; silently returning that the page range is
not summarized is sufficient reaction.
This bug was introduced by commit 975ad4e602ff as additional protection
against a bug whose actual fix was elsewhere. Backpatch equally.
Reported-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Diagnosed-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/2588667e-d07d-7e10-74e2-7e1e46194491@postgrespro.ru
Backpatch: 9.5 - master
This is like CVE-2018-1058 commit
582edc369cdbd348d68441fc50fa26a84afd0c1a. Today, a malicious user of a
publisher or subscriber database can invoke arbitrary SQL functions
under an identity running replication, often a superuser. This fix may
cause "does not exist" or "no schema has been selected to create in"
errors in a replication process. After upgrading, consider watching
server logs for these errors. Objects accruing schema qualification in
the wake of the earlier commit are unlikely to need further correction.
Back-patch to v10, which introduced logical replication.
Security: CVE-2020-14349
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Coverity pointed out, not unreasonably, that we checked fseeko's
result at every other call site but these. Failure to seek in the
temp file (note this is NOT pg_dump's output file) seems quite
unlikely, and even if it did happen the file length cross-check
further down would probably detect the problem. Still, that's a
poor excuse for not checking the result of a system call.
Ashutosh Bapat noticed that when logical walsender needs to wait for
WAL, and it realizes that it must send a keepalive message to
walreceiver to update the sent-LSN, which *does not* request a reply
from walreceiver, it wrongly sets the flag that it's going to wait for
that reply. That means that any future would-be sender of feedback
messages ends up not sending a feedback message, because they all
believe that a reply is expected.
With built-in logical replication there's not much harm in this, because
WalReceiverMain will send a ping-back every wal_receiver_timeout/2
anyway; but with other logical replication systems (e.g. pglogical) it
can cause significant pain.
This problem was introduced in commit 41d5f8ad734, where the
request-reply flag was changed from true to false to WalSndKeepalive,
without at the same time removing the line that sets
waiting_for_ping_response.
Just removing that line would be a sufficient fix, but it seems better
to shift the responsibility of setting the flag to WalSndKeepalive
itself instead of requiring caller to do it; this is clearly less
error-prone.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Backpatch: 9.5 and up
Discussion: https://postgr.es/m/20200806225558.GA22401@alvherre.pgsql
A couple of test cases had connect_timeout=14, a value that seems
to have been plucked from a hat. While it's more than sufficient
for normal cases, slow/overloaded buildfarm machines can get a timeout
failure here, as per recent report from "sungazer". Increase to 180
seconds, which is in line with our typical timeouts elsewhere in
the regression tests.
Back-patch to 9.6; the code looks different in 9.5, and this doesn't
seem to be quite worth the effort to adapt to that.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=sungazer&dt=2020-08-04%2007%3A12%3A22
These files were missed when commit a3ab7a707 added a new test query.
Understandable considering these files no longer exist in HEAD.
Per buildfarm member pademelon.
The new hlCover() algorithm that I introduced in commit c9b0c678d
turns out to potentially take O(N^2) or worse time on long documents,
if there are many occurrences of individual query words but few or no
substrings that actually satisfy the query. (One way to hit this
behavior is with a "common_word & rare_word" type of query.) This
seems unavoidable given the original goal of checking every substring
of the document, so we have to back off that idea. Fortunately, it
seems unlikely that anyone would really want headlines spanning all of
a long document, so we can avoid the worse-than-linear behavior by
imposing a maximum length of substring that we'll consider.
For now, just hard-wire that maximum length as a multiple of max_words
times max_fragments. Perhaps at some point somebody will argue for
exposing it as a ts_headline parameter, but I'm hesitant to make such
a feature addition in a back-patched bug fix.
I also noted that the hlFirstIndex() function I'd added in that
commit was unnecessarily stupid: it really only needs to check whether
a HeadlineWordEntry's item pointer is null or not. This wouldn't make
all that much difference in typical cases with queries having just
a few terms, but a cycle shaved is a cycle earned.
In addition, add a CHECK_FOR_INTERRUPTS call in TS_execute_recurse.
This ensures that hlCover's loop is cancellable if it manages to take
a long time, and it may protect some other TS_execute callers as well.
Back-patch to 9.6 as the previous commit was. I also chose to add the
CHECK_FOR_INTERRUPTS call to 9.5. The old hlCover() algorithm seems
to avoid the O(N^2) behavior, at least on the test case I tried, but
nonetheless it's not very quick on a long document.
Per report from Stephen Frost.
Discussion: https://postgr.es/m/20200724160535.GW12375@tamriel.snowman.net
In "High Availability, Load Balancing, and Replication" chapter,
certain descriptions of Pgpool-II were not correct at this point. It
does not need conflict resolution. Also "Multiple-Server Parallel
Query Execution" is not supported anymore.
Discussion: https://postgr.es/m/20200726.230128.53842489850344110.t-ishii%40sraoss.co.jp
Author: Tatsuo Ishii
Reviewed-by: Bruce Momjian
Backpatch-through: 9.5
Backpatch an assertion (that was originally added to Postgres 12 by
commit dd299df8189) that seems broadly useful. The assertion can detect
violations of the HOT invariant (i.e. no two index tuples can point to
the same heap TID) when CREATE INDEX somehow incorrectly allows that to
take place.
For example, a IndexBuildHeapScan/heapam_index_build_range_scan bug
might result in two tuples that both point to the same heap TID. If
these two tuples also happen to be duplicates, the assertion will fail.
Discussion: https://postgr.es/m/CAH2-WzmBxu4o=pMsniur+bwHqCGCmV_AOLkuK6BuU7ngA6evqw@mail.gmail.com
Backpatch: 9.5-11 only
A compressed stream may end with an empty packet. In this case
decompression finishes before reading the empty packet and the
remaining stream packet causes a failure in reading the following
data. This commit makes sure to consume such extra data, avoiding a
failure when decompression the data. This corner case was reproducible
easily with a data length of 16kB, and existed since e94dd6a. A cheap
regression test is added to cover this case based on a random,
incompressible string.
The first attempt of this patch has allowed to find an older failure
within the compression logic of pgcrypto, fixed by b9b6105. This
involved SLES 15 with z390 where a custom flavor of libz gets used.
Bonus thanks to Mark Wong for providing access to the specific
environment.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
Commit 85c9d347 addressed a similar problem for Gather and Gather
Merge nodes but forgot to account for nodes above parallel nodes. This
still works for nodes above Gather node because we shut down the workers
for Gather node as soon as there are no more tuples. We can do a similar
thing for Gather Merge as well but it seems better to account for stats
during nodes shutdown after completing the execution.
Reported-by: Stéphane Lorek, Jehan-Guillaume de Rorthais
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Amit Kapila
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/20200718160206.584532a2@firost
contrib/pgcrypto mishandled the case where deflate() does not consume
all of the offered input on the first try. It reset the next_in pointer
to the start of the input instead of leaving it alone, causing the wrong
data to be fed to the next deflate() call.
This has been broken since pgcrypto was committed. The reason for the
lack of complaints seems to be that it's fairly hard to get stock zlib
to not consume all the input, so long as the output buffer is big enough
(which it normally would be in pgcrypto's usage; AFAICT the input is
always going to be packetized into packets no larger than ZIP_OUT_BUF).
However, IBM's zlibNX implementation for AIX evidently will do it
in some cases.
I did not add a test case for this, because I couldn't find one that
would fail with stock zlib. When we put back the test case for
bug #16476, that will cover the zlibNX situation well enough.
While here, write deflate()'s second argument as Z_NO_FLUSH per its
API spec, instead of hard-wiring the value zero.
Per buildfarm results and subsequent investigation.
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
TLS 1.3 uses a different way of specifying ciphers and a different
OpenSSL API. PostgreSQL currently does not support setting those
ciphers. For now, just document this. In the future, support for
this might be added somehow.
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
This reverts commit 9e10898, after finding out that buildfarm members
running SLES 15 on z390 complain on the compression and decompression
logic of the new test: pipistrelles, barbthroat and steamerduck.
Those hosts are visibly using hardware-specific changes to improve zlib
performance, requiring more investigation.
Thanks to Tom Lane for the discussion.
Discussion: https://postgr.es/m/20200722093749.GA2564@paquier.xyz
Backpatch-through: 9.5
A compressed stream may end with an empty packet, and PGP decompression
finished before reading this empty packet in the remaining stream. This
caused a failure in pgcrypto, handling this case as corrupted data.
This commit makes sure to consume such extra data, avoiding a failure
when decompression the entire stream. This corner case was reproducible
with a data length of 16kB, and existed since its introduction in
e94dd6a. A cheap regression test is added to cover this case.
Thanks to Jeff Janes for the extra investigation.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
The executor checks for this error, and so does the bootstrap catalog
loader, but we never checked for it in retail catalog manipulations.
The folly of that has now been exposed, so let's add assertions
checking it. Checking in CatalogTupleInsert[WithInfo] and
CatalogTupleUpdate[WithInfo] should be enough to cover this.
Back-patch to v10; the aforesaid functions didn't exist before that,
and it didn't seem worth adapting the patch to the oldest branches.
But given the risk of JIT crashes, I think we certainly need this
as far back as v11.
Pre-v13, we have to explicitly exclude pg_subscription.subslotname
and pg_subscription_rel.srsublsn from the checks, since they are
mismarked. (Even if we change our mind about applying BKI_FORCE_NULL
in the branch tips, it doesn't seem wise to have assertions that
would fire in existing databases.)
Discussion: https://postgr.es/m/298837.1595196283@sss.pgh.pa.us
This coding technique is unsafe, since we'd be accessing off the end
of the tuple if the field is null. SIGSEGV is pretty improbable, but
perhaps not impossible. Also, returning garbage for the LSN doesn't
seem like a great idea, even if callers aren't looking at it today.
Also update docs to point out explicitly that
pg_subscription.subslotname and pg_subscription_rel.srsublsn
can be null.
Perhaps we should mark these two fields BKI_FORCE_NULL, so that
they'd be correctly labeled in databases that are initdb'd in the
future. But we can't force that for existing databases, and on
balance it's not too clear that having a mix of different catalog
contents in the field would be wise.
Apply to v10 (where this code came in) through v12. Already
fixed in v13 and HEAD.
Discussion: https://postgr.es/m/732838.1595278439@sss.pgh.pa.us
Commit b9c130a1f failed to apply the publisher-to-subscriber column
mapping while checking which columns were updated. Perhaps less
significantly, it didn't exclude dropped columns either. This could
result in an incorrect updated-columns bitmap and thus wrong decisions
about whether to fire column-specific triggers on the subscriber while
applying updates. In HEAD (since commit 9de77b545), it could also
result in accesses off the end of the colstatus array, as detected by
buildfarm member skink. Fix the logic, and adjust 003_constraints.pl
so that the problem is exposed in unpatched code.
In HEAD, also add some assertions to check that we don't access off
the ends of these newly variable-sized arrays.
Back-patch to v10, as b9c130a1f was.
Discussion: https://postgr.es/m/CAH2-Wz=79hKQ4++c5A060RYbjTHgiYTHz=fw6mptCtgghH2gJA@mail.gmail.com
We had two occurrences of "Mitteleuropäische Zeit" in Europe.txt,
though the corresponding entries in Default were spelled
"Mitteleuropaeische Zeit". Standardize on the latter spelling to
avoid questions of which encoding to use.
While here, correct a couple of other trivial inconsistencies between
the Default file and the supposedly-matching entries in the *.txt
files, as exposed by some checking with comm(1). Also, add BDST to
the Europe.txt file; it previously was only listed in Default.
None of this has any direct functional effect.
Per complaint from Christoph Berg. As usual for timezone data patches,
apply to all branches.
Discussion: https://postgr.es/m/20200716100743.GE3534683@msg.df7cb.de
pg_test_fsync has always opened files using the text mode on Windows, as
this is the default mode used if not enforced by _setmode().
This fixes a failure when running pg_test_fsync down to 12 because
O_DSYNC and the text mode are not able to work together nicely. We
fixed the handling of O_DSYNC in 12~ for the tool by switching to the
concurrent-safe version of fopen() in src/port/ with 0ba06e0. And
40cfe86, by enforcing the text mode for compatibility reasons if O_TEXT
or O_BINARY are not specified by the caller, broke pg_test_fsync. For
all versions, this avoids any translation overhead, and pg_test_fsync
should test binary writes, so it is a gain in all cases.
Note that O_DSYNC is still not handled correctly in ~11, leading to
pg_test_fsync to show insanely high numbers for open_datasync() (using
this property it is easy to notice that the binary mode is much
faster). This would require a backpatch of 0ba06e0 and 40cfe86, which
could potentially break existing applications, so this is left out.
There are no TAP tests for this tool yet, so I have checked all builds
manually using MSVC. We could invent a new option to run a single
transaction instead of using a duration of 1s to make the tests a
maximum short, but this is left as future work.
Thanks to Bruce Momjian for the discussion.
Reported-by: Jeff Janes
Author: Michael Paquier
Discussion: https://postgr.es/m/16526-279ded30a230d275@postgresql.org
Backpatch-through: 9.5
This commit back-patches the v12-era commits a73d08319, cc92cca43,
and 7570df0f3 into supported pre-v12 branches. The net effect is to
eliminate our former dependency on the never-standard sys_siglist[]
array, instead using POSIX-standard strsignal(3).
What motivates doing this now is that glibc just removed sys_siglist[]
from the set of symbols available to newly-built programs. While our
code can survive without sys_siglist[], it then fails to print any
description of the signal that killed a child process, which is a
non-negligible loss of friendliness. We can expect that people will
be wanting to build the back branches on platforms that include this
change, so we need to do something.
Since strsignal(3) has existed for quite a long time, and we've not
had any trouble with these patches so far in v12, it seems safe to
back-patch into older branches.
Discussion: https://postgr.es/m/3179114.1594853308@sss.pgh.pa.us
When working with an online source cluster, pg_rewind gets a list of all
the files in the source data directory using a WITH RECURSIVE query,
returning a NULL result for a file's metadata if it gets removed between
the moment it is listed in a directory and the moment its metadata is
obtained with pg_stat_file() (say a recycled WAL segment). The query
result was processed in such a way that for each tuple we checked only
that the first file's metadata was NULL. This could have two
consequences, both resulting in a failure of the rewind:
- If the first tuple referred to a removed file, all files from the
source would be ignored.
- Any file actually missing would not be considered as such.
While on it, rework slightly the code so as no values are saved if we
know that a file is going to be skipped.
Issue introduced by b36805f, so backpatch down to 9.5.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Daniel Gustafsson, Masahiko Sawada
Discussion: https://postgr.es/m/20200713061010.GC23581@telsasoft.com
Backpatch-through: 9.5
An ALTER TABLE to validate a foreign key in which another subcommand
already caused a pending table rewrite could fail due to ALTER TABLE
attempting to validate the foreign key before the actual table rewrite
takes place. This situation could result in an error such as:
ERROR: could not read block 0 in file "base/nnnnn/nnnnn": read only 0 of 8192 bytes
The failure here was due to the SPI call which validates the foreign key
trying to access an index which is yet to be rebuilt.
Similarly, we also incorrectly tried to validate CHECK constraints before
the heap had been rewritten.
The fix for both is to delay constraint validation until phase 3, after
the table has been rewritten. For CHECK constraints this means a slight
behavioral change. Previously ALTER TABLE VALIDATE CONSTRAINT on
inheritance tables would be validated from the bottom up. This was
different from the order of evaluation when a new CHECK constraint was
added. The changes made here aligns the VALIDATE CONSTRAINT evaluation
order for inheritance tables to be the same as ADD CONSTRAINT, which is
generally top-down.
Reported-by: Nazli Ugur Koyluoglu, using SQLancer
Discussion: https://postgr.es/m/CAApHDvp%3DZXv8wiRyk_0rWr00skhGkt8vXDrHJYXRMft3TjkxCA%40mail.gmail.com
Backpatch-through: 9.5 (all supported versions)
The qual pushdown logic assumed that all Vars in a restriction clause
must be Vars referencing subquery outputs; but since we introduced
LATERAL, it's possible for such a Var to be a lateral reference instead.
This led to an assertion failure in debug builds. In a non-debug
build, there might be no ill effects (if qual_is_pushdown_safe decided
the qual was unsafe anyway), or we could get failures later due to
construction of an invalid plan. I've not gone to much length to
characterize the possible failures, but at least segfaults in the
executor have been observed.
Given that this has been busted since 9.3 and it took this long for
anybody to notice, I judge that the case isn't worth going to great
lengths to optimize. Hence, fix by just teaching qual_is_pushdown_safe
that such quals are unsafe to push down, matching the previous behavior
when it accidentally didn't fail.
Per report from Tom Ellis. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200713175124.GQ8220@cloudinit-builder
Parallel pg_restore has always supposed that ACL items for different
objects are independent and can be restored in parallel without
conflicts. However, there is one case where this fails: because
REVOKE on a table is defined to also revoke the privilege(s) at
column level, we can't restore per-column ACLs till after we restore
any table-level privileges on their table. Failure to honor this
restriction can lead to "tuple concurrently updated" errors during
parallel restore, or even to the per-column ACLs silently disappearing
because the table-level REVOKE is executed afterwards.
To fix, add a dependency from each column-level ACL item to its table's
ACL item, if there is one. Note that this doesn't fix the hazard
for pre-existing archive files, only for ones made with a corrected
pg_dump. Given that the bug's been there quite awhile without
field reports, I think this is acceptable.
This requires changing the API of pg_dump's dumpACL() function.
To keep its argument list from getting even longer, I removed the
"CatalogId objCatId" argument, which has been unused for ages.
Per report from Justin Pryzby. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20200706050129.GW4107@telsasoft.com
Re-point comp.ai.genetic FAQ link to a more stable address.
Remove stale links to AIX documentation; we don't really need to
tell AIX users how to use their systems.
Remove stale links to HP documentation about SSL. We've had to
update those twice before, making it increasingly obvious that
HP does not intend them to be stable landing points. They're
not particularly authoritative, either. (This change effectively
reverts bbd3bdba3.)
Daniel Gustafsson and Álvaro Herrera, per a gripe from
Kyotaro Horiguchi. Back-patch, since these links are
just as dead in the back branches.
Discussion: https://postgr.es/m/20200709.161226.204639179120026914.horikyota.ntt@gmail.com
