If you take a base backup from a standby server with "pg_basebackup -X
fetch", and the timeline switches while the backup is being taken, the
backup used to fail with an error "requested WAL segment %s has already
been removed". This is because the server-side code that sends over the
required WAL files would not construct the WAL filename with the correct
timeline after a switch.
Fix that by using readdir() to scan pg_xlog for all the WAL segments in the
range, regardless of timeline.
Also, include all timeline history files in the backup, if taken with
"-X fetch". That fixes another related bug: If a timeline switch happened
just before the backup was initiated in a standby, the WAL segment
containing the initial checkpoint record contains WAL from the older
timeline too. Recovery will not accept that without a timeline history file
that lists the older timeline.
Backpatch to 9.2. Versions prior to that were not affected as you could not
take a base backup from a standby before 9.2.
The cascading standby patch in 9.2 changed the way WAL files are treated
when restored from the archive. Before, they were restored under a temporary
filename, and not kept in pg_xlog, but after the patch, they were copied
under pg_xlog. This is necessary for a cascading standby to find them, but
it also means that if the archive goes offline and a standby is restarted,
it can recover back to where it was using the files in pg_xlog. It also
means that if you take an offline backup from a standby server, it includes
all the required WAL files in pg_xlog.
However, the same change was not made to timeline history files, so if the
WAL segment containing the checkpoint record contains a timeline switch, you
will still get an error if you try to restart recovery without the archive,
or recover from an offline backup taken from the standby.
With this patch, timeline history files restored from archive are copied
into pg_xlog like WAL files are, so that pg_xlog contains all the files
required to recover. This is a corner-case pre-existing issue in 9.2, but
even more important in master where it's possible for a standby to follow a
timeline switch through streaming replication. To make that possible, the
timeline history files must be present in pg_xlog.
Code review for commit 2f582f76b1945929ff07116cd4639747ce9bb8a1: don't use
a static variable for what ought to be a deparse_context field, fix
non-multibyte-safe test for spaces, avoid useless and potentially O(N^2)
(though admittedly with a very small constant) calculations of wrap
positions when we aren't going to wrap.
transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
If a relation file was removed when the server-side counterpart of
pg_basebackup was just about to open it to send it to the client, you'd
get a "could not open file" error. Fix that.
Backpatch to 9.1, this goes back to when pg_basebackup was introduced.
If pg_extension_config_dump() is executed again for a table already listed
in the extension's extconfig, the code was blindly making a new array entry.
This does not seem useful. Fix it to replace the existing array entry
instead, so that it's possible for extension update scripts to alter the
filter conditions for configuration tables.
In addition, teach ALTER EXTENSION DROP TABLE to check for an extconfig
entry for the target table, and remove it if present. This is not a 100%
solution because it's allowed for an extension update script to just
summarily DROP a member table, and that code path doesn't go through
ExecAlterExtensionContentsStmt. We could probably make that case clean
things up if we had to, but it would involve sticking a very ugly wart
somewhere in the guts of dependency.c. Since on the whole it seems quite
unlikely that extension updates would want to remove pre-existing
configuration tables, making the case possible with an explicit command
seems sufficient.
Per bug #7756 from Regina Obe. Back-patch to 9.1 where extensions were
introduced.
After the recovery target timeline is changed, we would still recycle and
preallocate WAL segments on the old target timeline. Those WAL segments
created for the old timeline are a waste of space, although otherwise
harmless.
The problem is that when installing a recycled WAL segment as a future one,
ThisTimeLineID is used to construct the filename. ThisTimeLineID is
initialized in the checkpointer process to the recovery target timeline at
startup, but it was not updated when the startup process chooses a new
target timeline (recovery_target_timeline='latest'). To fix, always update
ThisTimeLineID before recycling WAL segments at a restartpoint.
This still leaves a small window where we might install WAL segments under
wrong timeline ID, if the target timeline is changed just as we're about to
start recycling. Also, when we're not on the target timeline yet, but still
replaying some older timeline, we'll install WAL segments to the newer
timeline anyway and they will still go wasted. We'll just live with the
waste in that situation.
Commit to 9.2 and 9.1. Older versions didn't change recovery target timeline
after startup, and for master, I'll commit a slightly different variant of
this.
If you restored from a backup taken from a standby, and the last record in
the backup is the checkpoint record, ie. there is no redo required except
for the checkpoint record, we would fail to notice that we've reached the
end-of-backup point, and the database is consistent. The result was an
error "WAL ends before end of online backup". To fix, move the
have-we-reached-end-of-backup check into CheckRecoveryConsistency(), which
is already responsible for similar checks with minRecoveryPoint, and is
called in the right places.
Backpatch to 9.2, this check and bug did not exist before that.
Some versions of libedit expose bogus definitions of setproctitle(),
optreset, and perhaps other symbols that we don't want configure to pick up
on. There was a previous report of similar problems with strlcpy(), which
we addressed in commit 59cf88da91bc88978b05275ebd94ac2d980c4047, but the
problem has evidently grown in scope since then. In hopes of not having to
deal with it again in future, rearrange configure's tests for supplied
functions so that we ignore libedit/libreadline except when probing
specifically for functions we expect them to provide.
Per report from Christoph Berg, though this is slightly more aggressive
than his proposed patch.
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc31a992703911a9953e299c8d730c778 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
We failed to ever fill the sixth line (LISTEN_ADDR), which caused the
attempt to fill the seventh line (SHMEM_KEY) to fail, so that the shared
memory key never got added to the file in standalone mode. This has been
broken since we added more content to our lock files in 9.1.
To fix, tweak the logic in CreateLockFile to add an empty LISTEN_ADDR
line in standalone mode. This is a tad grotty, but since that function
already knows almost everything there is to know about the contents of
lock files, it doesn't seem that it's any better to hack it elsewhere.
It's not clear how significant this bug really is, since a standalone
backend should never have any children and thus it seems not critical
to be able to check the nattch count of the shmem segment externally.
But I'm going to back-patch the fix anyway.
This problem had escaped notice because of an ancient (and in hindsight
pretty dubious) decision to suppress LOG-level messages by default in
standalone mode; so that the elog(LOG) complaint in AddToDataDirLockFile
that should have warned of the problem didn't do anything. Fixing that
is material for a separate patch though.
If a tuple is larger than page size minus space reserved for fillfactor,
heap_multi_insert would never find a page that it fits in and repeatedly ask
for a new page from RelationGetBufferForTuple. If a tuple is too large to
fit on any page, taking fillfactor into account, RelationGetBufferForTuple
will always expand the relation. In a normal insert, heap_insert will accept
that and put the tuple on the new page. heap_multi_insert, however, does a
fillfactor check of its own, and doesn't accept the newly-extended page
RelationGetBufferForTuple returns, even though there is no other choice to
make the tuple fit.
Fix that by making the logic in heap_multi_insert more like the heap_insert
logic. The first tuple is always put on the page RelationGetBufferForTuple
gives us, and the fillfactor check is only applied to the subsequent tuples.
Report from David Gould, although I didn't use his patch.
The dynahash code requires the number of buckets in a hash table to fit
in an int; but since we calculate the desired hash table size dynamically,
there are various scenarios where we might calculate too large a value.
The resulting overflow can lead to infinite loops, division-by-zero
crashes, etc. I (tgl) had previously installed some defenses against that
in commit 299d1716525c659f0e02840e31fbe4dea3, but that covered only one
call path. Moreover it worked by limiting the request size to work_mem,
but in a 64-bit machine it's possible to set work_mem high enough that the
problem appears anyway. So let's fix the problem at the root by installing
limits in the dynahash.c functions themselves.
Trouble report and patch by Jeff Davis.
All versions of pg_upgrade upgraded invalid indexes caused by CREATE
INDEX CONCURRENTLY failures and marked them as valid. The patch adds a
check to all pg_upgrade versions and throws an error during upgrade or
--check.
Backpatch to 9.2, 9.1, 9.0. Patch slightly adjusted.
EndRecPtr is the last record that we've read, but not necessarily yet
replayed. CheckRecoveryConsistency should compare minRecoveryPoint with the
last replayed record instead. This caused recovery to think it's reached
consistency too early.
Now that we do the check in CheckRecoveryConsistency correctly, we have to
move the call of that function to after redoing a record. The current place,
after reading a record but before replaying it, is wrong. In particular, if
there are no more records after the one ending at minRecoveryPoint, we don't
enter hot standby until one extra record is generated and read by the
standby, and CheckRecoveryConsistency is called. These two bugs conspired
to make the code appear to work correctly, except for the small window
between reading the last record that reaches minRecoveryPoint, and
replaying it.
In the passing, rename recoveryLastRecPtr, which is the last record
replayed, to lastReplayedEndRecPtr. This makes it slightly less confusing
with replayEndRecPtr, which is the last record read that we're about to
replay.
Original report from Kyotaro HORIGUCHI, further diagnosis by Fujii Masao.
Backpatch to 9.0, where Hot Standby subtly changed the test from
"minRecoveryPoint < EndRecPtr" to "minRecoveryPoint <= EndRecPtr". The
former works because where the test is performed, we have always read one
more record than we've replayed.
Normally each module is tested in a database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This new mode, enabled by adding USE_MODULE_DB=1 to the make command
line, runs most modules in a database with the module name embedded in
it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Second attempt at this, this time accomodating make versions older
than 3.82.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Per report from Kyotaro HORIGUCHI. Backpatch to 8.4. Before that,
minRecoveryPoint was not updated during recovery at all.
Commit 729205571e81b4767efc42ad7beb53663e08d1ff added privileges on data
types, but there were a number of oversights. The implementation of
default privileges for types missed a few places, and pg_dump was
utterly innocent of the whole concept. Per bug #7741 from Nathan Alden,
and subsequent wider investigation.
When deleteOneObject closes and reopens the pg_depend relation,
we must see to it that the relcache pointer held by the calling function
(typically performMultipleDeletions) is updated. Usually the relcache
entry is retained so that the pointer value doesn't change, which is why
the problem had escaped notice ... but after a cache flush event there's
no guarantee that the same memory will be reassigned. To fix, change
the recursive functions' APIs so that we pass around a "Relation *"
not just "Relation".
Per investigation of occasional buildfarm failures. This is trivial
to reproduce with -DCLOBBER_CACHE_ALWAYS, which points up the sad
lack of any buildfarm member running that way on a regular basis.
If we're not in hot standby mode, then there's no way for users to connect
to reset the recoveryPause flag, so we shouldn't pause. The code was aware
of this but the test to see if pausing was safe was seriously inadequate:
it wasn't paying attention to reachedConsistency, and besides what it was
testing was that we could legally enter hot standby, not that we have
done so. Get rid of that in favor of checking LocalHotStandbyActive,
which because of the coding in CheckRecoveryConsistency is tantamount to
checking that we have told the postmaster to enter hot standby.
Also, move the recoveryPausesHere() call that reacts to asynchronous
recoveryPause requests so that it's not in the middle of application of a
WAL record. I put it next to the recoveryStopsHere() call --- in future
those are going to need to interact significantly, so this seems like a
good waystation.
Also, don't bother trying to read another WAL record if we've already
decided not to continue recovery. This was no big deal when the code was
written originally, but now that reading a record might entail actions like
fetching an archive file, it seems a bit silly to do it like that.
Per report from Jeff Janes and subsequent discussion. The pause feature
needs quite a lot more work, but this gets rid of some indisputable bugs,
and seems safe enough to back-patch.
When waiting for an XLOG_BACKUP_RECORD the minRecoveryPoint
will be incorrect, so we must not declare recovery as consistent
before we have seen the record. Major bug allowing recovery to end
too early in some cases, allowing people to see inconsistent db.
This patch to HEAD and 9.2, other fix required for 9.1 and 9.0
Simon Riggs and Andres Freund, bug report by Jeff Janes
During VACUUM if we pause to perform a cycle
of index cleanup we drop the vmbuffer pin,
so we should do the same thing when heap
scan completes. This avoids holding vmbuffer
pin across the main index cleanup in VACUUM,
which could be minutes or hours longer than
necessary for correctness.
Bug report and suggested fix from Pavan Deolasee
Normally each module is tested in aq database named contrib_regression,
which is dropped and recreated at the beginhning of each pg_regress run.
This mode, enabled by adding USE_MODULE_DB=1 to the make command line,
runs most modules in a database with the module name embedded in it.
This will make testing pg_upgrade on clusters with the contrib modules
a lot easier.
Still to be done: adapt to the MSVC build system.
Backpatch to 9.0, which is the earliest version it is reasonably
possible to test upgrading from.
We've generally recommended use of INSTEAD triggers over rules since that
feature was added; but this old text in the CREATE VIEW reference page
didn't get the memo. Noted by Thomas Kellerer.
This reverts commit c11130690d6dca64267201a169cfb38c1adec5ef in favor of
actually fixing the problem: namely, that we should never have been
modifying the checkpoint record's nextXid at this point to begin with.
The nextXid should match the state as of the checkpoint's logical WAL
position (ie the redo point), not the state as of its physical position.
It's especially bogus to advance it in some wal_levels and not others.
In any case there is no need for the checkpoint record to carry the
same nextXid shown in the XLOG_RUNNING_XACTS record just emitted by
LogStandbySnapshot, as any replay operation will already have adopted
that value as current.
This fixes bug #7710 from Tarvi Pillessaar, and probably also explains bug
#6291 from Daniel Farina, in that if a checkpoint were in progress at the
instant of XID wraparound, the epoch bump would be lost as reported.
(And, of course, these days there's at least a 50-50 chance of a checkpoint
being in progress at any given instant.)
Diagnosed by me and independently by Andres Freund. Back-patch to all
branches supporting hot standby.
If wal_level = hot_standby we update the checkpoint nextxid,
though in the case where a wraparound occurred half-way through
a checkpoint we would neglect updating the epoch also. Updating
the nextxid is arguably the wrong thing to do, but changing that
may introduce subtle bugs into hot standby startup, while updating
the value doesn't cause any known bugs yet. Minimal fix now to
HEAD and backbranches, wider fix later in HEAD.
Bug reported in #6291 by Daniel Farina and slightly differently in
Cause analysis and recommended fixes from Tom Lane and Andres Freund.
Applied patch is minimal version of Andres Freund's work.
client encoding and the client encoding is not *safe* one. Such an
example is, file encoding is UTF-8 and client encoding SJIS. Patch
contributed by Jiang Guiqing.
When we do "make install" to create a temp installation, we don't want
that instance of make to try to communicate with any instance of make
that might be calling us. This is known to cause problems if the
upper make has a -jN flag, and in principle could cause problems even
without that. Unset the relevant environment variables to prevent such
issues.
Andres Freund
The previous coding worked as long as MODULEDIR wasn't set explicitly,
because we create sharedir/$(datamoduledir) and the default value of
that is "extension". But if some other value is specified for MODULEDIR
then the installation directory needed for the control file wasn't made.
Cédric Villemain
If we had not been holding buffer pin continuously since the tuple was
initially fetched by the UPDATE or DELETE query, it would be possible for
VACUUM or a page-prune operation to move the tuple while we're trying to
copy it. This would result in a garbage "old" tuple value being passed to
an AFTER ROW UPDATE or AFTER ROW DELETE trigger. The preconditions for
this are somewhat improbable, and the timing constraints are very tight;
so it's not so surprising that this hasn't been reported from the field,
even though the bug has been there a long time.
Problem found by Andres Freund. Back-patch to all active branches.
The length of a socket path name is constrained by the size of struct
sockaddr_un, and there's not a lot we can do about it since that is a
kernel API. However, it would be a good thing if we produced an
intelligible error message when the user specifies a socket path that's too
long --- and getaddrinfo's standard API is too impoverished to do this in
the natural way. So insert explicit tests at the places where we construct
a socket path name. Now you'll get an error that makes sense and even
tells you what the limit is, rather than something generic like
"Non-recoverable failure in name resolution".
Per trouble report from Jeremy Drake and a fix idea from Andrew Dunstan.
