These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
On balance, the need to cover this case changes my mind in favor of pushing
all error-message generation duties into the two fe-secure.c routines.
So do it that way.
In many cases, pqsecure_read/pqsecure_write set up useful error messages,
which were then overwritten with useless ones by their callers. Fix this
by defining the responsibility to set an error message to be entirely that
of the lower-level function when using SSL.
Back-patch to 8.3; the code is too different in 8.2 to be worth the
trouble.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
PQsetvalue unnecessarily duplicated the logic in pqAddTuple, and didn't
duplicate it exactly either --- pqAddTuple does not care what is in the
tuple-pointer array positions beyond the last valid entry, whereas the
code in PQsetvalue assumed such positions would contain NULL. This led
to possible crashes if PQsetvalue was applied to a PGresult that had
previously been enlarged with pqAddTuple, for instance one built from a
server query. Fix by relying on pqAddTuple instead of duplicating logic,
and not assuming anything about the contents of res->tuples[res->ntups].
Back-patch to 8.4, where PQsetvalue was introduced.
Andrew Chernow
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
The code to assemble ldap_get_values_len's output into a single string
wrote the terminating null one byte past where it should. Fix that,
and make some other cosmetic adjustments to make the code a trifle more
readable and more in line with usual Postgres coding style.
Also, free the "result" string when done with it, to avoid a permanent
memory leak.
Bug report and patch by Albe Laurenz, cosmetic adjustments by me.
Recent releases had a check on rel->rd_refcnt in heap_drop_with_catalog,
but failed to cover the possibility of pending trigger events at DROP time.
(Before 8.4 we didn't even check the refcnt.) When the trigger events were
eventually fired, you'd get "could not open relation with OID nnn" errors,
as in recent report from strk. Better to throw a suitable error when the
DROP is attempted.
Also add a similar check in DROP INDEX.
Back-patch to all supported branches.
The trick is to not try to build executables directly from .c files,
but to always build the intermediate .o files. For obscure reasons,
Darwin's version of gcc will leave debug cruft behind in the first
case but not the second. Per complaint from Robert Haas.
The previous patches failed to cover a lot of symlinks that are only
added in platform-specific cases. Make the lists match what's in the
Makefile for each branch.
parameter against server cert's CN field) to succeed in the case where
both host and hostaddr are specified. As with the existing precedents
for Kerberos, GSSAPI, SSPI, it is the calling application's responsibility
that host and hostaddr match up --- we just use the host name as given.
Per bug #5559 from Christopher Head.
In passing, make the error handling and messages for the no-host-name-given
failure more consistent among these four cases, and correct a lie in the
documentation: we don't attempt to reverse-lookup host from hostaddr
if host is missing.
Back-patch to 8.4 where SSL cert verification was introduced.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
set ferror() but never set feof(). This is known to be the case for recent
glibc when trying to read a directory as a file, and might be true for other
platforms/cases too. Per report from Ed L. (There is more that we ought to
do about his report, but this is one easily identifiable issue.)
at least in some Windows versions, these functions are capable of returning
a failure indication without setting errno. That puts us into an infinite
loop if the previous value happened to be EINTR. Per report from Brendan
Hill.
Back-patch to 8.2. We could take it further back, but since this is only
known to be an issue on Windows and we don't support Windows before 8.2,
it does not seem worth the trouble.
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
list, minus a few specific words that have to be treated specially. This
replaces a hard-wired list of keywords that would have needed manual
maintenance, and was not getting it. The 8.4 coding was already missing
these words, causing ecpg to incorrectly treat them as reserved words:
CALLED, CATALOG, DEFINER, ENUM, FOLLOWING, INVOKER, OPTIONS, PARTITION,
PRECEDING, RANGE, SECURITY, SERVER, UNBOUNDED, WRAPPER. In HEAD we were
additionally missing COMMENTS, FUNCTIONS, SEQUENCES, TABLES.
Per gripe from Bosco Rama.
It seems the flex developers have decided to change yyleng from int to size_t.
This has already happened in the latest release of OS X, and will start
happening elsewhere once the next release of flex appears. Rather than trying
to divine how it's declared in any particular build, let's just remove the one
existing not-very-necessary external usage.
Back-patch to all supported branches; not so much because users in the field
are likely to care about building old branches with cutting-edge flex, as
to keep OSX-based buildfarm members from having problems with old branches.
