Beginning with the next development cycle, PG servers will report two-part
not three-part version numbers. Fix libpq so that it will compute the
correct numeric representation of such server versions for reporting by
PQserverVersion(). It's desirable to get this into the field and
back-patched ASAP, so that older clients are more likely to understand the
new server version numbering by the time any such servers are in the wild.
(The results with an old client would probably not be catastrophic anyway
for a released server; for example "10.1" would be interpreted as 100100
which would be wrong in detail but would not likely cause an old client to
misbehave badly. But "10devel" or "10beta1" would result in sversion==0
which at best would result in disabling all use of modern features.)
Extracted from a patch by Peter Eisentraut; comments added by me
Patch: <802ec140-635d-ad86-5fdf-d3af0e260c22@2ndquadrant.com>
This is required for the result to be a legal tsvector value.
Noted while fooling with Andreas Seltenreich's ts_delete() crash.
Discussion: <87invhoj6e.fsf@credativ.de>
Such cases either failed an Assert, or produced a corrupt tsvector in
non-Assert builds, as reported by Andreas Seltenreich. The reason is
that tsvector_delete_by_indices() just assumed that its input array had
no duplicates. Fix by explicitly de-duping.
In passing, improve some comments, and fix a number of tests for null
values to use ERRCODE_NULL_VALUE_NOT_ALLOWED not
ERRCODE_INVALID_PARAMETER_VALUE.
Discussion: <87invhoj6e.fsf@credativ.de>
This reverts the spaces before k/M/G/TB units removed for consistency in
commit ca0c37b56f4a80ad758774e34c86cc4335583d29.
Discussion: 20160802165116.GC32575@momjian.us
DST law changes in Kemerovo and Novosibirsk. Historical corrections for
Azerbaijan, Belarus, and Morocco. Asia/Novokuznetsk and Asia/Novosibirsk
now use numeric time zone abbreviations instead of invented ones. Zones
for Antarctic bases and other locations that have been uninhabited for
portions of the time span known to the tzdata database now report "-00"
rather than "zzz" as the zone abbreviation for those time spans.
Also, I decided to remove some of the timezone/data/ files that we don't
use. At one time that subdirectory was a complete copy of what IANA
distributes in the tzdata tarballs, but that hasn't been true for a long
time. There seems no good reason to keep shipping those specific files
but not others; they're just bloating our tarballs.
tqual.h is included in some front-end compiles, and a static inline
breaks on buildfarm member castoroides. Since the macro is never
referenced, it should dodge that problem, although this doesn't
seem like the cleanest way of hiding things from front-end compiles.
Report and review by Tom Lane; patch by me.
As mentioned in its commit message, eca0f1db left open a race condition,
where a page could be marked all-visible, after the code checked
PageIsAllVisible() to pin the VM, but before the page is locked. Plug
that hole.
Reviewed-By: Robert Haas, Andres Freund
Author: Amit Kapila
Discussion: CAEepm=3fWAbWryVW9swHyLTY4sXVf0xbLvXqOwUoDiNCx9mBjQ@mail.gmail.com
Backpatch: -
Some conditions resulted in "return" directly out of a PG_TRY block,
which left the exception stack dangling, and to add insult to injury
failed to restore the state of set_latch_on_sigusr1.
This is a bug only in 9.5; in HEAD it was accidentally fixed by commit
db0f6cad4, which removed the surrounding PG_TRY block. However, I (tgl)
chose to apply the patch to HEAD as well, because the old coding was
gratuitously different from WaitForBackgroundWorkerStartup(), and there
would indeed have been no bug if it were done like that to start with.
Dmitry Ivanov
Discussion: <1637882.WfYN5gPf1A@abook>
Previously, we tested for MVCC snapshots to see whether they were too
old, but not TOAST snapshots, which can lead to complaints about missing
TOAST chunks if those chunks are subject to early pruning. Ideally,
the threshold lsn and timestamp for a TOAST snapshot would be that of
the corresponding MVCC snapshot, but since we have no way of deciding
which MVCC snapshot was used to fetch the TOAST pointer, use the oldest
active or registered snapshot instead.
Reported by Andres Freund, who also sketched out what the fix should
look like. Patch by me, reviewed by Amit Kapila.
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
We don't want postmaster child processes to contain a copy of the
postmaster's PostmasterContext. That would be a waste of memory at least,
and at worst a security issue, since there are copies of the semi-sensitive
pg_hba and pg_ident data in there. All other child process types delete
the PostmasterContext after forking, but the original coding of the
background worker patch (commit da07a1e85) did not do so. It appears
that the only reason for that was to avoid copying the bgworker's
MyBgworkerEntry out of that context; but the couple of additional
statements needed to do so are hardly good justification for it. Hence,
copy that data and then clear the context as other child processes do.
Because this patch changes the memory context in which a bgworker function
gains control, back-patching it would be a bit risky, so we won't fix this
in back branches. The "security" complaint is pretty thin anyway for
generic bgworkers; only with the introduction of parallel query is there
any question of running untrusted code in a bgworker process.
Discussion: <14111.1470082717@sss.pgh.pa.us>
In test 001_stream_rep we're using pg_stat_replication.write_location to
determine catch-up status, but we care about xlog having been applied
not just received, so change that to apply_location.
In test 003_recovery_targets, we query the database for a recovery
target specification and later for the xlog position supposedly
corresponding to that recovery specification. If for whatever reason
more WAL is written between the two queries, the recovery specification
is earlier than the xlog position used by the query in the test harness,
so we wait forever, leading to test failures. Deal with this by using a
single query to extract both items. In 2a0f89cd717 we tried to deal
with it by giving them more tests to run, but in hindsight that was
obviously doomed to failure (no revert of that, though).
Per hamster buildfarm failures.
Author: Michaël Paquier
This is apparently harmless on Windows, but on Unix it results in an
assertion failure. We'd not noticed because this code doesn't get
used on Unix unless you build with -DEXEC_BACKEND. Bug was evidently
introduced by sloppy refactoring in commit 31c453165.
Thomas Munro
Discussion: <CAEepm=1VOnbVx4wsgQFvj94hu9jVt2nVabCr7QiooUSvPJXkgQ@mail.gmail.com>
As noted by Alvaro, there are CHECK_FOR_INTERRUPTS() calls in the shm_mq.c
functions called by HandleParallelMessages(). I believe they're all
unreachable since we always pass nowait = true, but it doesn't seem like
a great idea to assume that no such call will ever be reachable from
HandleParallelMessages(). If that did happen, there would be a risk of a
recursive call to HandleParallelMessages(), which it does not appear to be
designed for --- for example, there's nothing that would prevent
out-of-order processing of received messages. And certainly such cases
cannot easily be tested. So let's prevent it by holding off interrupts for
the duration of the function. Back-patch to 9.5 which contains identical
code.
Discussion: <14869.1470083848@sss.pgh.pa.us>
Since -c plus -C requests dropping and recreating the target database
as a whole, not dropping individual objects in it, we should assume that
the public schema already exists and need not be created. The previous
coding considered only the state of the -c option, so it would emit
"CREATE SCHEMA public" anyway, leading to an unexpected error in restore.
Back-patch to 9.2. Older versions did not accept -c with -C so the
issue doesn't arise there. (The logic being patched here dates to 8.0,
cf commit 2193121fa, so it's not really wrong that it didn't consider
the case at the time.)
Note that versions before 9.6 will still attempt to emit REVOKE/GRANT
on the public schema; but that happens without -c/-C too, and doesn't
seem to be the focus of this complaint. I considered extending this
stanza to also skip the public schema's ACL, but that would be a
misfeature, as it'd break cases where users intentionally changed that
ACL. The real fix for this aspect is Stephen Frost's work to not dump
built-in ACLs, and that's not going to get back-ported.
Per bugs #13804 and #14271. Solution found by David Johnston and later
rediscovered by me.
Report: <20151207163520.2628.95990@wrigleys.postgresql.org>
Report: <20160801021955.1430.47434@wrigleys.postgresql.org>
ParallelMessagePending *must* be marked volatile, because it's set
by a signal handler. On the other hand, it's pointless for
HandleParallelMessageInterrupt to save/restore errno; that must be,
and is, done at the outer level of the SIGUSR1 signal handler.
Calling CHECK_FOR_INTERRUPTS() inside HandleParallelMessages, which itself
is called from CHECK_FOR_INTERRUPTS(), seems both useless and hazardous.
The comment claiming that this is needed to handle the error queue going
away is certainly misguided, in any case.
Improve a couple of error message texts, and use
ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE to report loss of parallel worker
connection, since that's what's used in e.g. tqueue.c. (Maybe it would be
worth inventing a dedicated ERRCODE for this type of failure? But I do not
think ERRCODE_INTERNAL_ERROR is appropriate.)
Minor stylistic cleanups.
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
The document specifies that pg_replication_origin_xact_reset function
doesn't have any argument variables. But previously it was actually
defined so as to have two argument variables, though they were not
used at all. That is, the pg_proc entry for that function was incorrect.
This patch fixes the pg_proc entry and removes those two arguments
from the function definition.
No back-patch because this change needs a catalog version bump
although the issue exists in 9.5 as well. Instead, a note about those
unused argument variables will be added to 9.5 document later.
Catalog version bumped due to the change of pg_proc.
The help message for pg_basebackup specifies that the numbers 0 through 9
are accepted as valid values of -Z option. But, previously -Z 0 was rejected
as an invalid compression level.
Per discussion, it's better to make pg_basebackup treat 0 as valid
compression level meaning no compression, like pg_dump.
Back-patch to all supported versions.
Reported-By: Jeff Janes
Reviewed-By: Amit Kapila
Discussion: CAMkU=1x+GwjSayc57v6w87ij6iRGFWt=hVfM0B64b1_bPVKRqg@mail.gmail.com
This text was added by commit ff213239c, and not long thereafter obsoleted
by commit 4adc2f72a (which made the test depend on NBuffers instead); but
nobody noticed the need for an update. Commit 9563d5b5e adds some further
dependency on maintenance_work_mem, but the existing verbiage seems to
cover that with about as much precision as we really want here. Let's
just take it all out rather than leaving ourselves open to more errors of
omission in future. (That solution makes this change back-patchable, too.)
Noted by Peter Geoghegan.
Discussion: <CAM3SWZRVANbj9GA9j40fAwheQCZQtSwqTN1GBTVwRrRbmSf7cg@mail.gmail.com>
When doing record typmod remapping, tqueue.c did fresh catalog lookups
for each tuple it processed, which was pretty horrible performance-wise
(it seemed to about halve the already none-too-quick speed of bulk reads
in parallel mode). Worse, it insisted on putting bits of that data into
TopMemoryContext, from where it never freed them, causing a
session-lifespan memory leak. (I suppose this was coded with the idea
that the sender process would quit after finishing the query ---
but the receiver uses the same code.)
Restructure to avoid repetitive catalog lookups and to keep that data
in a query-lifespan context, in or below the context where the
TQueueDestReceiver or TupleQueueReader itself lives.
Fix some other bugs such as continuing to use a tupledesc after
releasing our refcount on it. Clean up cavalier datatype choices
(typmods are int32, please, not int, and certainly not Oid). Improve
comments and error message wording.
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
TupleQueueReaderNext() leaks like a sieve if it has to do any tuple
disassembly/reconstruction. While we could try to clean up its allocations
piecemeal, it seems like a better idea just to insist that it should be run
in a short-lived memory context, so that any transient space goes away
automatically. I chose to have nodeGather.c switch into its existing
per-tuple context before the call, rather than inventing a separate
context inside tqueue.c.
This is sufficient to stop all leakage in the simple case I exhibited
earlier today (see link below), but it does not deal with leaks induced
in more complex cases by tqueue.c's insistence on using TopMemoryContext
for data that it's not actually trying hard to keep track of. That issue
is intertwined with another major source of inefficiency, namely failure
to cache lookup results across calls, so it seems best to deal with it
separately.
In passing, improve some comments, and modify gather_readnext's method for
deciding when it's visited all the readers so that it's more obviously
correct. (I'm not actually convinced that the previous code *is*
correct in the case of a reader deletion; it certainly seems fragile.)
Discussion: <32763.1469821037@sss.pgh.pa.us>
An evident copy-and-pasteo in commit 2bd9e412f broke the non-blocking
aspect of pq_putmessage_noblock(), causing it to behave identically to
pq_putmessage(). That function is nowadays used only in walsender.c,
so that the net effect was to cause walsenders to hang up waiting for
the receiver in situations where they should not.
Kyotaro Horiguchi
Patch: <20160728.185228.58375982.horiguchi.kyotaro@lab.ntt.co.jp>
Per the fgets() specification, it cannot return without reading some data
unless it reports EOF or error. So the code here assumed that the data
buffer would necessarily be nonempty when we go to check for a newline
having been read. However, Agostino Sarubbo noticed that this could fail
to be true if the first byte of the data is a NUL (\0). The fgets() API
doesn't really work for embedded NULs, which is something I don't feel
any great need for us to worry about since we generally don't allow NULs
in SQL strings anyway. But we should not access off the end of our own
buffer if the case occurs. Normally this would just be a harmless read,
but if you were unlucky the byte before the buffer would contain '\n'
and we'd overwrite it with '\0', and if you were really unlucky that
might be valuable data and psql would crash.
Agostino reported this to pgsql-security, but after discussion we concluded
that it isn't worth treating as a security bug; if you can control the
input to psql you can do far more interesting things than just maybe-crash
it. Nonetheless, it is a bug, so back-patch to all supported versions.
Now that we've nailed down the principle that NullTest with !argisrow
is fully equivalent to SQL's IS [NOT] DISTINCT FROM NULL, let's teach
the parser about it. This produces a slightly more compact parse tree
and is much more amenable to optimization than a DistinctExpr, since
the planner knows a good deal about NullTest and next to nothing about
DistinctExpr.
I'm not sure that there are all that many queries in the wild that could
be improved by this, but at least one source of such cases is the patch
just made to postgres_fdw to emit IS [NOT] DISTINCT FROM NULL when
IS [NOT] NULL isn't semantically correct.
No back-patch, since to the extent that this does affect planning results,
it might be considered undesirable plan destabilization.
