on Windows. ecpglib doesn't link with libpgport, but picks and compiles
the .c files it needs individually. To cope with that, move the setlocale()
wrapper from chklocale.c to a separate setlocale.c file, and include that
in ecpglib.
These days, such a response is far more likely to signify a server-side
problem, such as fork failure. Reporting "server does not support SSL"
(in sslmode=require) could be quite misleading. But the results could
be even worse in sslmode=prefer: if the problem was transient and the
next connection attempt succeeds, we'll have silently fallen back to
protocol version 2.0, possibly disabling features the user needs.
Hence, it seems best to just eliminate the assumption that backing off
to non-SSL/2.0 protocol is the way to recover from an "E" response, and
instead treat the server error the same as we would in non-SSL cases.
I tested this change against a pre-7.0 server, and found that there
was a second logic bug in the "prefer" path: the test to decide whether
to make a fallback connection attempt assumed that we must have opened
conn->ssl, which in fact does not happen given an "E" response. After
fixing that, the code does indeed connect successfully to pre-7.0,
as long as you didn't set sslmode=require. (If you did, you get
"Unsupported frontend protocol", which isn't completely off base
given the server certainly doesn't support SSL.)
Since there seems no reason to believe that pre-7.0 servers exist anymore
in the wild, back-patch to all supported branches.
There are assorted situations wherein PQconnectPoll() will abandon a
connection attempt and try again with different parameters (eg, SSL versus
not SSL). However, the code forgot to discard any pending data in libpq's
I/O buffers when doing this. In at least one case (server returns E
message during SSL negotiation), there is unread input data which bollixes
the next connection attempt. I have not checked to see whether this is
possible in the other cases where we close the socket and retry, but it
seems like a matter of good defensive programming to add explicit
buffer-flushing code to all of them.
This is one of several issues exposed by Daniel Farina's report of
misbehavior after a server-side fork failure.
This has been wrong since forever, so back-patch to all supported branches.
The previous test for status < 0 test is in fact testing nothing if the
compiler considers an enum to be an unsigned data type. clang doesn't
like tautologies, so do this instead.
Report by Peter Geoghegan, fix as suggested by Tom Lane.
On balance, the need to cover this case changes my mind in favor of pushing
all error-message generation duties into the two fe-secure.c routines.
So do it that way.
In many cases, pqsecure_read/pqsecure_write set up useful error messages,
which were then overwritten with useless ones by their callers. Fix this
by defining the responsibility to set an error message to be entirely that
of the lower-level function when using SSL.
Back-patch to 8.3; the code is too different in 8.2 to be worth the
trouble.
This disables an entirely unnecessary "sanity check" that causes failures
in nonblocking mode, because OpenSSL complains if we move or compact the
write buffer. The only actual requirement is that we not modify pending
data once we've attempted to send it, which we don't. Per testing and
research by Martin Pihlak, though this fix is a lot simpler than his patch.
I put the same change into the backend, although it's less clear whether
it's necessary there. We do use nonblock mode in some situations in
streaming replication, so seems best to keep the same behavior in the
backend as in libpq.
Back-patch to all supported releases.
PQsetvalue unnecessarily duplicated the logic in pqAddTuple, and didn't
duplicate it exactly either --- pqAddTuple does not care what is in the
tuple-pointer array positions beyond the last valid entry, whereas the
code in PQsetvalue assumed such positions would contain NULL. This led
to possible crashes if PQsetvalue was applied to a PGresult that had
previously been enlarged with pqAddTuple, for instance one built from a
server query. Fix by relying on pqAddTuple instead of duplicating logic,
and not assuming anything about the contents of res->tuples[res->ntups].
Back-patch to 8.4, where PQsetvalue was introduced.
Andrew Chernow
The --flag argument can be used to tell xgettext the arguments of
which functions should be flagged with c-format in the PO files,
instead of guessing based on the presence of format specifiers, which
fails if no format specifiers are present but the translation
accidentally introduces one.
Appropriate flag settings have been added for each message catalog.
based on a patch by Christoph Berg for bug #6066
It currently doesn't make a difference, but it's inconsistent with
most other usage, and it might interfere with a future patch, so I'll
change it all in a separate commit.
Also, replace tabs with spaces for alignment.
Per recommendation from Peter. Neither choice is bulletproof, but this
is the existing style and it does help prevent unexpected environment
variable substitution.
The initial commit of the ALTER TABLE ADD FOREIGN KEY NOT VALID feature
failed to support labeling such constraints as deferrable. The best fix
for this seems to be to fold NOT VALID into ConstraintAttributeSpec.
That's a bit more general than the documented syntax, but it allows
better-targeted syntax error messages.
In addition, do some mostly-but-not-entirely-cosmetic code review for
the whole NOT VALID patch.
Apparently there is no buildfarm critter exercising this case after all,
because it fails in several places. With this patch, build, install,
check-world, and installcheck-world pass for me on OS X.
This unifies a bunch of ugly #ifdef's in one place. Per discussion,
we only need this where HAVE_UNIX_SOCKETS, so no need to cover Windows.
Marko Kreen, some adjustment by Tom Lane
It turns out the reason we hadn't found out about the portability issues
with our credential-control-message code is that almost no modern platforms
use that code at all; the ones that used to need it now offer getpeereid(),
which we choose first. The last holdout was NetBSD, and they added
getpeereid() as of 5.0. So far as I can tell, the only live platform on
which that code was being exercised was Debian/kFreeBSD, ie, FreeBSD kernel
with Linux userland --- since glibc doesn't provide getpeereid(), we fell
back to the control message code. However, the FreeBSD kernel provides a
LOCAL_PEERCRED socket parameter that's functionally equivalent to Linux's
SO_PEERCRED. That is both much simpler to use than control messages, and
superior because it doesn't require receiving a message from the other end
at just the right time.
Therefore, add code to use LOCAL_PEERCRED when necessary, and rip out all
the credential-control-message code in the backend. (libpq still has such
code so that it can still talk to pre-9.1 servers ... but eventually we can
get rid of it there too.) Clean up related autoconf probes, too.
This means that libpq's requirepeer parameter now works on exactly the same
platforms where the backend supports peer authentication, so adjust the
documentation accordingly.
Even though our existing code for handling credentials control messages has
been basically unchanged since 2001, it was fundamentally wrong: it did not
ensure proper alignment of the supplied buffer, and it was calculating
buffer sizes and message sizes incorrectly. This led to failures on
platforms where alignment padding is relevant, for instance FreeBSD on
64-bit platforms, as seen in a recent Debian bug report passed on by
Martin Pitt (http://bugs.debian.org//cgi-bin/bugreport.cgi?bug=612888).
Rewrite to do the message-whacking using the macros specified in RFC 2292,
following a suggestion from Theo de Raadt in that thread. Tested by me
on Debian/kFreeBSD-amd64; since OpenBSD and NetBSD document the identical
CMSG API, it should work there too.
Back-patch to all supported branches.
Even though this only affects the insertion of a parenthesized word,
it's unwise to assume that parentheses can pass through untranslated.
And in any case, the new version is clearer in the code and for
translators.
The code to assemble ldap_get_values_len's output into a single string
wrote the terminating null one byte past where it should. Fix that,
and make some other cosmetic adjustments to make the code a trifle more
readable and more in line with usual Postgres coding style.
Also, free the "result" string when done with it, to avoid a permanent
memory leak.
Bug report and patch by Albe Laurenz, cosmetic adjustments by me.
Normally nel == 0 works okay because the initial value of "last" will be
less than "base"; but if "base" is zero then the calculation wraps around
and we have a very large (unsigned) value for "last", so that the loop can
be entered and we get a SIGSEGV on a bogus pointer.
This is certainly the proximate cause of the recent reports of Windows
builds crashing on 'infinity'::timestamp --- evidently, they're either not
setting an active timezonetktbl, or setting an empty one. It's not yet
clear to me why it's only happening on Windows and not happening on any
buildfarm member. But even if that's due to some bug elsewhere, it seems
wise for this function to not choke on the powerup values of
timezonetktbl/sztimezonetktbl.
I also changed the copy of this code in ecpglib, although I am not sure
whether it's exposed to a similar hazard.
Per report and stack trace from Richard Broersma.
Per recent -hackers discussion. The formats in question are %G and %V,
and cause warnings on MinGW at least. We assume the ecpg application
knows what it's doing if it passes these formats to the library.
The style is set to "printf" for backwards compatibility everywhere except
on Windows, where it is set to "gnu_printf", which eliminates hundreds of
false error messages from modern versions of gcc arising from %m and %ll{d,u}
formats.
The recent patch to remove gcc 4.6 warnings created some new ones, at
least on my rather old gcc version. Try to make everybody happy by
casting to "void" when we just want to discard the result.
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
This would lead to leaking the PGconn structure after an error detected by
conninfo_array_parse(), as well as failing to return a useful error message
in such cases. Backpatch to 9.0 where the error was introduced.
Joseph Adams
variable hiding. A constant is not a variable. It worked in most cases by
accident, because we add constants to the global list of variables (why?),
but float constants like 1.23 were interpreted as struct field references,
and not found.
Backpatch to 9.0, where the test for variable hiding was added.
