Unstable sort order related to changes to nbtree from commit dd299df8
can cause two lines of DETAIL output to be in opposite-of-expected
order. Suppress the output using the same VERBOSITY hack that is used
elsewhere in the foreign_data tests.
Note that the same foreign_data.out DETAIL output was mechanically
updated by commit dd299df8. Only a few such changes were required,
though.
Per buildfarm member batfish.
Discussion: https://postgr.es/m/CAH2-WzkCQ_MtKeOpzozj7QhhgP1unXsK8o9DMAFvDqQFEPpkYQ@mail.gmail.com
Make nbtree treat all index tuples as having a heap TID attribute.
Index searches can distinguish duplicates by heap TID, since heap TID is
always guaranteed to be unique. This general approach has numerous
benefits for performance, and is prerequisite to teaching VACUUM to
perform "retail index tuple deletion".
Naively adding a new attribute to every pivot tuple has unacceptable
overhead (it bloats internal pages), so suffix truncation of pivot
tuples is added. This will usually truncate away the "extra" heap TID
attribute from pivot tuples during a leaf page split, and may also
truncate away additional user attributes. This can increase fan-out,
especially in a multi-column index. Truncation can only occur at the
attribute granularity, which isn't particularly effective, but works
well enough for now. A future patch may add support for truncating
"within" text attributes by generating truncated key values using new
opclass infrastructure.
Only new indexes (BTREE_VERSION 4 indexes) will have insertions that
treat heap TID as a tiebreaker attribute, or will have pivot tuples
undergo suffix truncation during a leaf page split (on-disk
compatibility with versions 2 and 3 is preserved). Upgrades to version
4 cannot be performed on-the-fly, unlike upgrades from version 2 to
version 3. contrib/amcheck continues to work with version 2 and 3
indexes, while also enforcing stricter invariants when verifying version
4 indexes. These stricter invariants are the same invariants described
by "3.1.12 Sequencing" from the Lehman and Yao paper.
A later patch will enhance the logic used by nbtree to pick a split
point. This patch is likely to negatively impact performance without
smarter choices around the precise point to split leaf pages at. Making
these two mostly-distinct sets of enhancements into distinct commits
seems like it might clarify their design, even though neither commit is
particularly useful on its own.
The maximum allowed size of new tuples is reduced by an amount equal to
the space required to store an extra MAXALIGN()'d TID in a new high key
during leaf page splits. The user-facing definition of the "1/3 of a
page" restriction is already imprecise, and so does not need to be
revised. However, there should be a compatibility note in the v12
release notes.
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas, Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-WzkVb0Kom=R+88fDFb=JSxZMFvbHVC6Mn9LJ2n=X=kS-Uw@mail.gmail.com
There are 2-arguments and 4-arguments versions of jsonb_path_match() and
jsonb_path_exists(). But 4-arguments versions have optional 3rd and 4th
arguments, that leads to ambiguity. In the same time 2-arguments versions are
needed only for @@ and @? operators. So, rename 2-arguments versions to
remove the ambiguity.
Catversion is bumped.
Unrecognized attribute names are supposed to be ignored. But the code
would error out on an unrecognized attribute value even if it did not
recognize the attribute name. So unrecognized attributes wouldn't
really be ignored unless the value happened to be one that matched a
recognized value. This would break some important cases where the
attribute would be processed by ucol_open() directly. Fix that and
add a test case.
The restructured code should also avoid compiler warnings about
initializing a UColAttribute value to -1, because the type might be an
unsigned enum. (reported by Andres Freund)
Aggregates have acquired a dozen or so optional attributes in recent
years for things like parallel query and moving-aggregate mode; the
lack of an OR REPLACE option to add or change these for an existing
agg makes extension upgrades gratuitously hard. Rectify.
Like commit f41551f61f9cf4eedd5b7173f985a3bdb4d9858c, this aims
to make it easier to add non-Boolean options to VACUUM (or, in
this case, to ANALYZE). Instead of building up a bitmap of
options directly in the parser, build up a list of DefElem
objects and let ExecVacuum() sort it out; right now, we make
no use of the fact that a DefElem can carry an associated value,
but it will be easy to make that change in the future.
Masahiko Sawada
Discussion: http://postgr.es/m/CAD21AoATE4sn0jFFH3NcfUZXkU2BMbjBWB_kDj-XWYA-LXDcQA@mail.gmail.com
In RI_FKey_pk_upd_check_required(), we check among other things
whether the old and new key are equal, so that we don't need to run
cascade actions when nothing has actually changed. This was using the
equality operator. But the effect of this is that if a value in the
primary key is changed to one that "looks" different but compares as
equal, the update is not propagated. (Examples are float -0 and 0 and
case-insensitive text.) This appears to violate the SQL standard, and
it also behaves inconsistently if in a multicolumn key another key is
also updated that would cause the row to compare as not equal.
To fix, if we are looking at the PK table in ri_KeysEqual(), then do a
bytewise comparison similar to record_image_eq() instead of using the
equality operators. This only makes a difference for ON UPDATE
CASCADE, but for consistency we treat all changes to the PK the same. For
the FK table, we continue to use the equality operators.
Discussion: https://www.postgresql.org/message-id/flat/3326fc2e-bc02-d4c5-e3e5-e54da466e89a@2ndquadrant.com
Starting in ICU 54, collation customization attributes can be
specified in the locale string, for example
"@colStrength=primary;colCaseLevel=yes". Add support for this for
older ICU versions as well, by adding some minimal parsing of the
attributes in the locale string and calling ucol_setAttribute() on
them. This is essentially what never ICU versions do internally in
ucol_open(). This was we can offer this functionality in a consistent
way in all ICU versions supported by PostgreSQL.
Also add some tests for ICU collation customization.
Reported-by: Daniel Verite <daniel@manitou-mail.org>
Discussion: https://www.postgresql.org/message-id/0270ebd4-f67c-8774-1a5a-91adfb9bb41f@2ndquadrant.com
It looks like we can leave in most of the test cases for Infinity/NaN
inputs, but buildfarm member jacana gets the wrong answer for acosh(Inf).
It's not worth carrying a variant expected file for that, so just disable
that one test.
Discussion: https://postgr.es/m/E1h3nUY-0000sM-Vf@gemulon.postgresql.org
Add support of numeric error suppression to jsonpath as it's required by
standard. This commit doesn't use PG_TRY()/PG_CATCH() in order to implement
that. Instead, it provides internal versions of numeric functions used, which
support error suppression.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Alexander Korotkov, Nikita Glukhov
Reviewed-by: Tomas Vondra
SQL 2016 standards among other things contains set of SQL/JSON features for
JSON processing inside of relational database. The core of SQL/JSON is JSON
path language, allowing access parts of JSON documents and make computations
over them. This commit implements partial support JSON path language as
separate datatype called "jsonpath". The implementation is partial because
it's lacking datetime support and suppression of numeric errors. Missing
features will be added later by separate commits.
Support of SQL/JSON features requires implementation of separate nodes, and it
will be considered in subsequent patches. This commit includes following
set of plain functions, allowing to execute jsonpath over jsonb values:
* jsonb_path_exists(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_match(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query_array(jsonb, jsonpath[, jsonb, bool]).
* jsonb_path_query_first(jsonb, jsonpath[, jsonb, bool]).
This commit also implements "jsonb @? jsonpath" and "jsonb @@ jsonpath", which
are wrappers over jsonpath_exists(jsonb, jsonpath) and jsonpath_predicate(jsonb,
jsonpath) correspondingly. These operators will have an index support
(implemented in subsequent patches).
Catversion bumped, to add new functions and operators.
Code was written by Nikita Glukhov and Teodor Sigaev, revised by me.
Documentation was written by Oleg Bartunov and Liudmila Mantrova. The work
was inspired by Oleg Bartunov.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Nikita Glukhov, Teodor Sigaev, Alexander Korotkov, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Tomas Vondra, Andrew Dunstan, Pavel Stehule, Alexander Korotkov
When libpq is loaded in the server (for instance, by
libpqwalreceiver), it may use libpq environment variables set in the
postmaster environment for connection parameter defaults. This has
some confusing effects in our test suites. For example, the TAP test
infrastructure sets PGAPPNAME to allow identifying clients in the
server log. But this environment variable is also inherited by
temporary servers started with pg_ctl and is then in turn used by
libpqwalreceiver as the application_name for connecting to remote
servers where it then shows up in pg_stat_replication and is relevant
for things like synchronous_standby_names. Replication already has a
suitable default for application_name, and overriding that
accidentally then requires the individual test cases to re-override
that, which is all very confusing and unnecessary.
To fix, unset PGAPPNAME temporarily before running pg_ctl start or
restart in the tests.
More comprehensive approaches like unsetting all environment variables
in pg_ctl were considered but might be too complicated to achieve
portably.
The now unnecessary re-overriding of application_name by test cases is
also removed.
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/33383613-690e-6f1b-d5ba-4957ff40f6ce@2ndquadrant.com
Previously, the SERIALIZABLE isolation level prevented parallel query
from being used. Allow the two features to be used together by
sharing the leader's SERIALIZABLEXACT with parallel workers.
An extra per-SERIALIZABLEXACT LWLock is introduced to make it safe to
share, and new logic is introduced to coordinate the early release
of the SERIALIZABLEXACT required for the SXACT_FLAG_RO_SAFE
optimization, as follows:
The first backend to observe the SXACT_FLAG_RO_SAFE flag (set by
some other transaction) will 'partially release' the SERIALIZABLEXACT,
meaning that the conflicts and locks it holds are released, but the
SERIALIZABLEXACT itself will remain active because other backends
might still have a pointer to it.
Whenever any backend notices the SXACT_FLAG_RO_SAFE flag, it clears
its own MySerializableXact variable and frees local resources so that
it can skip SSI checks for the rest of the transaction. In the
special case of the leader process, it transfers the SERIALIZABLEXACT
to a new variable SavedSerializableXact, so that it can be completely
released at the end of the transaction after all workers have exited.
Remove the serializable_okay flag added to CreateParallelContext() by
commit 9da0cc35, because it's now redundant.
Author: Thomas Munro
Reviewed-by: Haribabu Kommi, Robert Haas, Masahiko Sawada, Kevin Grittner
Discussion: https://postgr.es/m/CAEepm=0gXGYhtrVDWOTHS8SQQy_=S9xo+8oCxGLWZAOoeJ=yzQ@mail.gmail.com
The previous test order had the effect that if something was wrong
with the identity functionality, the create_table_like test would
likely fail or crash first, which is confusing. Reorder so that the
identity test comes before create_table_like.
The assertions added by commits 34ea1ab7f et al found another problem:
set_dummy_rel_pathlist and mark_dummy_rel were failing to label
the dummy paths they create with the correct outer_relids, in case
the relation is necessarily parameterized due to having lateral
references in its tlist. It's likely that this has no user-visible
consequences in production builds, at the moment; but still an assertion
failure is a bad thing, so back-patch the fix.
Per bug #15694 from Roman Zharkov (via Alexander Lakhin)
and an independent report by Tushar Ahuja.
Discussion: https://postgr.es/m/15694-74f2ca97e7044f7f@postgresql.org
Discussion: https://postgr.es/m/7d72ab20-c725-3ce2-f99d-4e64dd8a0de6@enterprisedb.com
A couple of queries are run on the primary to create and fill in a test
table, which gets checked on the standby afterwards. However the test
was not waiting for the confirmation that the necessary records have
been replayed on the standby, leading to spurious failures.
Per buildfarm member loach. Thanks to Thomas Munro for the report and
Tom Lane for the failure analysis.
Discussion: https://postgr.es/m/CA+hUKGLUpqG52xtriUz5RpmeKPoEfNxNc-CginG+Cx+X2-Ycew@mail.gmail.com
Preliminary results from the buildfarm suggest that no platform gets
commit c6f153dcf's test cases wrong by more than one or two units in
the last place, so setting extra_float_digits = 0 should be plenty
to hide the cross-platform variations.
Also, add tests for Infinity/NaN inputs. I think it highly likely
that we'll end up removing these again, rather than adding code to
make ancient platforms conform. But it seems useful to find out
just how many platforms have such issues before we make a decision.
Discussion: https://postgr.es/m/E1h3nUY-0000sM-Vf@gemulon.postgresql.org
The initial commit tried to test them on trivial cases such as 0,
reasoning that we shouldn't hit any portability issues that way.
The buildfarm immediately proved that hope ill-founded, and anyway
it's not a great testing scheme because it doesn't prove that we're
even calling the right library function for each SQL function.
Instead, let's test them at inputs such as 1 (or something within
the valid range, as needed), so that each function should produce
a different output.
As committed, this is just about certain to show portability
failures, because it's very unlikely that every platform computes
these functions the same as mine down to the last bit. However,
I want to put it through a buildfarm cycle this way, so that
we can see how big the variations are. The plan is to add
"set extra_float_digits = -1", or whatever we need in order to
hide the variations; but first we need data.
Discussion: https://postgr.es/m/E1h3nUY-0000sM-Vf@gemulon.postgresql.org
The buildfarm doesn't like this, because some buildfarm members have
log_statement = 'all'. We could change the log level of the messages
instead, but Tom doesn't like that. So let's do this instead, at
least for now.
Patch by Sergei Kornilov, applied here in reverse.
Discussion: http://postgr.es/m/2123251552490241@myt6-fe24916a5562.qloud-c.yandex.net
If existing CHECK or NOT NULL constraints preclude the presence
of nulls, we need not look to see whether any are present.
Sergei Kornilov, reviewed by Stephen Frost, Ildar Musin, David Rowley,
and by me.
Discussion: http://postgr.es/m/81911511895540@web58j.yandex.ru
c186ba13 has fixed an issue related to the updates of the minimum
recovery LSN across multiple processes on standbys, but we never really
had a test case able to reliably check its logic.
This commit introduces a new test case to close the gap, and is designed
to check the consistency of data based on the minimum recovery point set
by either the startup process or the checkpointer for both an offline
cluster (by looking at the on-disk page headers) and an online cluster
(using pageinspect).
Note that with c186ba13 reverted, this test fails badly for both the
online and offline cases, as designed.
Author: Michael Paquier, Andrew Gierth
Reviewed-by: Andrew Gierth, Georgios Kokolatos, Arthur Zakirov
Discussion: https://postgr.es/m/20181108044525.GA17482@paquier.xyz
The SQL:2016 standard adds support for the hyperbolic functions
sinh(), cosh(), and tanh(). POSIX has long required libm to
provide those functions as well as their inverses asinh(),
acosh(), atanh(). Hence, let's just expose the libm functions
to the SQL level. As with the trig functions, we only implement
versions for float8, not numeric.
For the moment, we'll assume that all platforms actually do have
these functions; if experience teaches otherwise, some autoconf
effort may be needed.
SQL:2016 also adds support for base-10 logarithm, but with the
function name log10(), whereas the name we've long used is log().
Add aliases named log10() for the float8 and numeric versions.
Lætitia Avrot
Discussion: https://postgr.es/m/CAB_COdguG22LO=rnxDQ2DW1uzv8aQoUzyDQNJjrR4k00XSgm5w@mail.gmail.com
In commit b0eaa4c51bb, we left out a test that used a vacuum to remove dead
rows as the behavior of test was not predictable. This test has been
rewritten to use fillfactor instead to control free space. Since we no
longer need to remove dead rows as part of the test, put the fsm regression
test in a parallel group.
Author: John Naylor
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1L=qWp_bJ5aTc9+fy4Ewx2LPaLWY-RbR4a60g_rupCKnQ@mail.gmail.com
Historically guc.c has just refused examples like set work_mem = '30.1GB',
but it seems more useful for it to take that and round off the value to
some reasonable approximation of what the user said. Just rounding to
the parameter's native unit would work, but it would lead to rather
silly-looking settings, such as 31562138kB for this example. Instead
let's round to the nearest multiple of the next smaller unit (if any),
producing 30822MB.
Also, do the units conversion math in floating point and round to integer
(if needed) only at the end. This produces saner results for inputs that
aren't exact multiples of the parameter's native unit, and removes another
difference in the behavior for integer vs. float parameters.
In passing, document the ability to use hex or octal input where it
ought to be documented.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Further buildfarm testing shows that on the machines that are failing
ac75959cd's test case, what we're actually getting from strtod("-infinity")
is a syntax error (endptr == value) not ERANGE at all. This test case
is not worth carrying two sets of expected output for, so just remove it,
and revert commit b212245f9's misguided attempt to work around the platform
dependency.
Discussion: https://postgr.es/m/E1h33xk-0001Og-Gs@gemulon.postgresql.org
This change makes it possible to specify sub-millisecond delays,
which work well on most modern platforms, though that was not true
when the cost-delay feature was designed.
To support this without breaking existing configuration entries,
improve guc.c to allow floating-point GUCs to have units. Also,
allow "us" (microseconds) as an input/output unit for time-unit GUCs.
(It's not allowed as a base unit, at least not yet.)
Likewise change the autovacuum_vacuum_cost_delay reloption to be
floating-point; this forces a catversion bump because the layout of
StdRdOptions changes.
This patch doesn't in itself change the default values or allowed
ranges for these parameters, and it should not affect the behavior
for any already-allowed setting for them.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
This should reduce confusion in cases where we've applied a units
conversion, so that the number being reported (and the quoted range
limits) are in some other units than what the user gave in the
setting we're rejecting.
Some of the changes here assume that float GUCs can have units,
which isn't true just yet, but will be shortly.
Discussion: https://postgr.es/m/3811.1552169665@sss.pgh.pa.us
None of the code that uses GUC values is really prepared for them to
hold NaN, but parse_real() didn't have any defense against accepting
such a value. Treat it the same as a syntax error.
I haven't attempted to analyze the exact consequences of setting any
of the float GUCs to NaN, but since they're quite unlikely to be good,
this seems like a back-patchable bug fix.
Note: we don't need an explicit test for +-Infinity because those will
be rejected by existing range checks. I added a regression test for
that in HEAD, but not older branches because the spelling of the value
in the error message will be platform-dependent in branches where we
don't always use port/snprintf.c.
Discussion: https://postgr.es/m/1798.1552165479@sss.pgh.pa.us
Similarly to B-tree, GiST index access method gets support of INCLUDE
attributes. These attributes aren't used for tree navigation and aren't
present in non-leaf pages. But they are present in leaf pages and can be
fetched during index-only scan.
The point of having INCLUDE attributes in GiST indexes is slightly different
from the point of having them in B-tree. The main point of INCLUDE attributes
in B-tree is to define UNIQUE constraint over part of attributes enabled for
index-only scan. In GiST the main point of INCLUDE attributes is to use
index-only scan for attributes, whose data types don't have GiST opclasses.
Discussion: https://postgr.es/m/73A1A452-AD5F-40D4-BD61-978622FF75C1%40yandex-team.ru
Author: Andrey Borodin, with small changes by me
Reviewed-by: Andreas Karlsson
This allows a login to require both that the cn of the certificate
matches (like authentication type cert) *and* that another
authentication method (such as password or kerberos) succeeds as well.
The old value of clientcert=1 maps to the new clientcert=verify-ca,
clientcert=0 maps to the new clientcert=no-verify, and the new option
erify-full will add the validation of the CN.
Author: Julian Markwort, Marius Timmer
Reviewed by: Magnus Hagander, Thomas Munro
This adds a column that counts how many checksum failures have occurred
on files belonging to a specific database. Both checksum failures
during normal backend processing and those created when a base backup
detects a checksum failure are counted.
Author: Magnus Hagander
Reviewed by: Julien Rouhaud
When the timezone is UTC, timestamptz and timestamp are binary coercible
in both directions. See b8a18ad4850ea5ad7884aa6ab731fd392e73b4ad and
c22ecc6562aac895f0f0529707d7bdb460fd2a49 for the previous attempt in
this problem space. Skip the table rewrite; for now, continue to
needlessly rewrite any index on an affected column.
Reviewed by Simon Riggs and Tom Lane.
Discussion: https://postgr.es/m/20190226061450.GA1665944@rfd.leadboat.com
Correctly process nodes of more types than previously. In some cases,
nodes were being ignored (nothing was output); in other cases, trying to
return them resulted in errors about unrecognized nodes. In yet other
cases, necessary escaping (of XML special characters) was not being
done. Fix all those (as far as the authors could find) and add
regression tests cases verifying the new behavior.
I (Álvaro) was of two minds about backpatching these changes. They do
seem bugfixes that would benefit most users of the affected functions;
but on the other hand it would change established behavior in minor
releases, so it seems prudent not to.
Authors: Pavel Stehule, Markus Winand, Chapman Flack
Discussion:
https://postgr.es/m/CAFj8pRA6J25CtAZ2TuRvxK3gat7-bBUYh0rfE2yM7Hj9GD14Dg@mail.gmail.comhttps://postgr.es/m/8BDB0627-2105-4564-AA76-7849F028B96E@winand.at
The elephant in the room as pointed out by Chapman Flack, not fixed in
this commit, is that we still have XMLTABLE operating on XPath 1.0
instead of the standard-mandated XQuery (or even its subset XPath 2.0).
Fixing that is a major undertaking, however.
When we introduced separate ProjectSetPath nodes for application of
set-returning functions in v10, we inadvertently broke some cases where
we're supposed to recognize that the result of a subquery is known to be
empty (contain zero rows). That's because IS_DUMMY_REL was just looking
for a childless AppendPath without allowing for a ProjectSetPath being
possibly stuck on top. In itself, this didn't do anything much worse
than produce slightly worse plans for some corner cases.
Then in v11, commit 11cf92f6e rearranged things to allow the scan/join
targetlist to be applied directly to partial paths before they get
gathered. But it inserted a short-circuit path for dummy relations
that was a little too short: it failed to insert a ProjectSetPath node
at all for a targetlist containing set-returning functions, resulting in
bogus "set-valued function called in context that cannot accept a set"
errors, as reported in bug #15669 from Madelaine Thibaut.
The best way to fix this mess seems to be to reimplement IS_DUMMY_REL
so that it drills down through any ProjectSetPath nodes that might be
there (and it seems like we'd better allow for ProjectionPath as well).
While we're at it, make it look at rel->pathlist not cheapest_total_path,
so that it gives the right answer independently of whether set_cheapest
has been done lately. That dependency looks pretty shaky in the context
of code like apply_scanjoin_target_to_paths, and even if it's not broken
today it'd certainly bite us at some point. (Nastily, unsafe use of the
old coding would almost always work; the hazard comes down to possibly
looking through a dangling pointer, and only once in a blue moon would
you find something there that resulted in the wrong answer.)
It now looks like it was a mistake for IS_DUMMY_REL to be a macro: if
there are any extensions using it, they'll continue to use the old
inadequate logic until they're recompiled, after which they'll fail
to load into server versions predating this fix. Hopefully there are
few such extensions.
Having fixed IS_DUMMY_REL, the special path for dummy rels in
apply_scanjoin_target_to_paths is unnecessary as well as being wrong,
so we can just drop it.
Also change a few places that were testing for partitioned-ness of a
planner relation but not using IS_PARTITIONED_REL for the purpose; that
seems unsafe as well as inconsistent, plus it required an ugly hack in
apply_scanjoin_target_to_paths.
In passing, save a few cycles in apply_scanjoin_target_to_paths by
skipping processing of pre-existing paths for partitioned rels,
and do some cosmetic cleanup and comment adjustment in that function.
I renamed IS_DUMMY_PATH to IS_DUMMY_APPEND with the intention of breaking
any code that might be using it, since in almost every case that would
be wrong; IS_DUMMY_REL is what to be using instead.
In HEAD, also make set_dummy_rel_pathlist static (since it's no longer
used from outside allpaths.c), and delete is_dummy_plan, since it's no
longer used anywhere.
Back-patch as appropriate into v11 and v10.
Tom Lane and Julien Rouhaud
Discussion: https://postgr.es/m/15669-02fb3296cca26203@postgresql.org
Before commit 3fa2bb31 this type appeared in the catalogs to
select which of several block storage mechanisms each relation
used.
New features under development propose to revive the concept of
different block storage managers for new kinds of data accessed
via bufmgr.c, but don't need to put references to them in the
catalogs. So, avoid useless maintenance work on this type by
dropping it. Update some regression tests that were referencing
it where any type would do.
Discussion: https://postgr.es/m/CA%2BhUKG%2BDE0mmiBZMtZyvwWtgv1sZCniSVhXYsXkvJ_Wo%2B83vvw%40mail.gmail.com
This introduces the concept of table access methods, i.e. CREATE
ACCESS METHOD ... TYPE TABLE and
CREATE TABLE ... USING (storage-engine).
No table access functionality is delegated to table AMs as of this
commit, that'll be done in following commits.
Subsequent commits will incrementally abstract table access
functionality to be routed through table access methods. That change
is too large to be reviewed & committed at once, so it'll be done
incrementally.
Docs will be updated at the end, as adding them incrementally would
likely make them less coherent, and definitely is a lot more work,
without a lot of benefit.
Table access methods are specified similar to index access methods,
i.e. pg_am.amhandler returns, as INTERNAL, a pointer to a struct with
callbacks. In contrast to index AMs that struct needs to live as long
as a backend, typically that's achieved by just returning a pointer to
a constant struct.
Psql's \d+ now displays a table's access method. That can be disabled
with HIDE_TABLEAM=true, which is mainly useful so regression tests can
be run against different AMs. It's quite possible that this behaviour
still needs to be fine tuned.
For now it's not allowed to set a table AM for a partitioned table, as
we've not resolved how partitions would inherit that. Disallowing
allows us to introduce, if we decide that's the way forward, such a
behaviour without a compatibility break.
Catversion bumped, to add the heap table AM and references to it.
Author: Haribabu Kommi, Andres Freund, Alvaro Herrera, Dimitri Golgov and others
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.dehttps://postgr.es/m/20160812231527.GA690404@alvherre.pgsqlhttps://postgr.es/m/20190107235616.6lur25ph22u5u5av@alap3.anarazel.dehttps://postgr.es/m/20190304234700.w5tmhducs5wxgzls@alap3.anarazel.de
This is the only test that fails when run as an admin user. The reason
is that when Postgres is started via pg_ctl its admin privileges are
lowered. However, this test called 'postgres -D datadir' directly,
resulting in a failure. Replace that by calling pg_ctl and then checking
the result for the expected failure, and the logfile for the expected
error message.
Previously, rewriteTargetListIU() generated a list of attribute
numbers from the targetlist, which were passed to rewriteValuesRTE(),
which expected them to contain the same number of entries as there are
columns in the VALUES RTE, and to be in the same order. That was fine
when the target relation was a table, but for an updatable view it
could be broken in at least three different ways ---
rewriteTargetListIU() could insert additional targetlist entries for
view columns with defaults, the view columns could be in a different
order from the columns of the underlying base relation, and targetlist
entries could be merged together when assigning to elements of an
array or composite type. As a result, when recursing to the base
relation, the list of attribute numbers generated from the rewritten
targetlist could no longer be relied upon to match the columns of the
VALUES RTE. We got away with that prior to 41531e42d3 because it used
to always be the case that rewriteValuesRTE() did nothing for the
underlying base relation, since all DEFAULTS had already been replaced
when it was initially invoked for the view, but that was incorrect
because it failed to apply defaults from the base relation.
Fix this by examining the targetlist entries more carefully and
picking out just those that are simple Vars referencing the VALUES
RTE. That's sufficient for the purposes of rewriteValuesRTE(), which
is only responsible for dealing with DEFAULT items in the VALUES
RTE. Any DEFAULT item in the VALUES RTE that doesn't have a matching
simple-Var-assignment in the targetlist is an error which we complain
about, but in theory that ought to be impossible.
Additionally, move this code into rewriteValuesRTE() to give a clearer
separation of concerns between the 2 functions. There is no need for
rewriteTargetListIU() to know about the details of the VALUES RTE.
While at it, fix the comment for rewriteValuesRTE() which claimed that
it doesn't support array element and field assignments --- that hasn't
been true since a3c7a993d5 (9.6 and later).
Back-patch to all supported versions, with minor differences for the
pre-9.6 branches, which don't support array element and field
assignments to the same column in multi-row VALUES lists.
Reviewed by Amit Langote.
Discussion: https://postgr.es/m/15623-5d67a46788ec8b7f@postgresql.org
This changes the partition functions so as tables and indexes which are
not part of partition trees are handled the same way as what is done for
undefined objects and unsupported relkinds: pg_partition_tree() returns
no rows and pg_partition_root() returns a NULL result. Hence,
partitioned tables, partitioned indexes and relations whose flag
pg_class.relispartition is set are considered as valid objects to
process.
Previously, tables and indexes not included in a partition tree were
processed the same way as a partition or a partitioned table, which
caused the functions to return inconsistent results for inherited
tables, especially when inheriting from multiple tables.
Reported-by: Álvaro Herrera
Author: Amit Langote, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20190228193203.GA26151@alvherre.pgsql
Future-proofing against a common mistake in attempts to optimize NOT IN.
We don't have such an optimization right now, but attempts to do so
are in the works, and some of 'em are buggy. Add a regression test case
covering the point.
David Rowley
Discussion: https://postgr.es/m/CAKJS1f90E9agVZryVyUpbHQbjTt5ExqS2Fsodmt5_A7E_cEyVA@mail.gmail.com
In particular, make it possible to prove/refute "x IS NULL" and
"x IS NOT NULL" predicates from a clause involving a ScalarArrayOpExpr
even when we are unable or unwilling to deconstruct the expression
into an AND/OR tree. This avoids a former unexpected degradation of
plan quality when the size of an ARRAY[] expression or array constant
exceeded the arbitrary MAX_SAOP_ARRAY_SIZE limit. For IS-NULL proofs,
we don't really care about the values of the individual array elements;
at most, we care whether there are any, and for some common cases we
needn't even know that.
The main user-visible effect of this is to let the optimizer recognize
applicability of partial indexes with "x IS NOT NULL" predicates to
queries with "x IN (array)" clauses in some cases where it previously
failed to recognize that. The structure of predtest.c is such that a
bunch of related proofs will now also succeed, but they're probably
much less useful in the wild.
James Coleman, reviewed by David Rowley
Discussion: https://postgr.es/m/CAAaqYe8yKSvzbyu8w-dThRs9aTFMwrFxn_BkTYeXgjqe3CbNjg@mail.gmail.com
The function was tweaked so as it returned one row full of NULLs when
working on an unsupported relkind or an undefined object as of cc53123,
and after discussion with Amit and Álvaro it looks more natural to make
it return no rows.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Amit Langote
Discussion: https://postgr.es/m/20190227184808.GA17357@alvherre.pgsql
