The values 'infinity' and '-infinity' are a part of the DATE type
itself, so a bound of the date 'infinity' is not the same as an
unbounded/infinite range. However, it is still wrong to try to
canonicalize such values, because adding or subtracting one has no
effect. Fix by treating 'infinity' and '-infinity' the same as
unbounded ranges for the purposes of canonicalization (but not other
purposes).
Backpatch to all versions because it is inconsistent with the
documented behavior. Note that this could be an incompatibility for
applications relying on the behavior contrary to the documentation.
Author: Laurenz Albe
Reviewed-by: Thomas Munro
Discussion: https://postgr.es/m/77f24ea19ab802bc9bc60ddbb8977ee2d646aec1.camel%40cybertec.at
Backpatch-through: 9.4
A large fraction of this diff is just due to upstream's somewhat
random decision to rename a bunch of internal variables and struct
fields. However, there is an interesting new feature in zic:
it's grown a "-b slim" option that emits zone files without 32-bit
data and other backwards-compatibility hacks. We should consider
whether we wish to enable that.
This should lappend the OIDs, not lcons them; the existing code produced
a list in reversed order. This is harmless for single-key FKs or FKs
where all the key columns are of the same type, which probably explains
how it went unnoticed. But if those conditions are not met,
ATAddForeignKeyConstraint would make the wrong decision about whether an
existing FK needs to be revalidated. I think it would almost always err
in the safe direction by revalidating a constraint that didn't need it.
You could imagine scenarios where the pfeqop check was fooled by
swapping the types of two FK columns in one ALTER TABLE, but that case
would probably be rejected by other tests, so it might be impossible to
get to the worst-case scenario where an FK should be revalidated and
isn't. (And even then, it's likely to be fine, unless there are weird
inconsistencies in the equality behavior of the replacement types.)
However, this is a performance bug at least.
Noted while poking around to see whether lcons calls could be converted
to lappend.
This bug is old, dating to commit cb3a7c2b9, so back-patch to all
supported branches.
This can cause valgrind to complain, as the flag marking a buffer as a
temporary copy was not getting initialized.
While on it, fill in with zeros newly-created buffer pages. This does
not matter when loading a block from a temporary file, but it makes the
push of an index tuple into a new buffer page safer.
This has been introduced by 1d27dcf, so backpatch all the way down to
9.4.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/15899-0d24fb273b3dd90c@postgresql.org
Backpatch-through: 9.4
d4c3a156c added code to remove columns that were not part of a table's
PRIMARY KEY constraint from the GROUP BY clause when all the primary key
columns were present in the group by. This is fine to do since we know
that there will only be one row per group coming from this relation.
However, the logic failed to consider inheritance parent relations. These
can have child relations without a primary key, but even if they did, they
could duplicate one of the parent's rows or one from another child
relation. In this case, those additional GROUP BY columns are required.
Fix this by disabling the optimization for inheritance parent tables.
In v11 and beyond, partitioned tables are fine since partitions cannot
overlap and before v11 partitioned tables could not have a primary key.
Reported-by: Manuel Rigger
Discussion: http://postgr.es/m/CA+u7OA7VLKf_vEr6kLF3MnWSA9LToJYncgpNX2tQ-oWzYCBQAw@mail.gmail.com
Backpatch-through: 9.6
Don't think that the context "UPDATE tab SET var =" is a GUC-setting
command.
If we have "SET var =" but the "var" is not a known GUC variable,
don't offer any completions. The most likely explanation is that
we've misparsed the context and it's not really a GUC-setting command.
Per gripe from Ken Tanzer. Back-patch to 9.6. The issue exists
further back, but before 9.6 the code looks very different and it
doesn't actually know whether the "var" name matches anything,
so I desisted from trying to fix it.
Discussion: https://postgr.es/m/CAD3a31XpXzrZA9TT3BqLSHghdTK+=cXjNCE+oL2Zn4+oWoc=qA@mail.gmail.com
UBSan complains about this. Instead, cast to a suitable type requiring
only 4-byte alignment. DatumGetAnyArrayP() already assumes one can cast
between AnyArrayType and ArrayType, so this doesn't introduce a new
assumption. Back-patch to 9.5, where AnyArrayType was introduced.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190629210334.GA1244217@rfd.leadboat.com
The logic in reorder_grouping_sets to order grouping set elements to
match a pre-specified sort ordering was defective, resulting in
unnecessary sort nodes (though the query output would still be
correct). Repair, simplifying the code a little, and add a test.
Per report from Richard Guo, though I didn't use their patch. Original
bug seems to have been my fault.
Backpatch back to 9.5 where grouping sets were introduced.
Discussion: https://postgr.es/m/CAN_9JTzyjGcUjiBHxLsgqfk7PkdLGXiM=pwM+=ph2LsWw0WO1A@mail.gmail.com
Up to now, the MSVC build scripts are able to support only one fixed
version of OpenSSL, and they lacked logic to detect the version of
OpenSSL a given compilation of Postgres is linking to (currently 1.0.2,
the latest LTS of upstream which will be EOL'd at the end of 2019).
This commit adds more logic to detect the version of OpenSSL used by a
build and makes use of it to add support for compilation with OpenSSL
1.1.0 which requires a new set of compilation flags to work properly.
The supported OpenSSL installers have changed their library layer with
various library renames with the upgrade to 1.1.0, making the logic a
bit more complicated. The scripts are now able to adapt to the new
world order.
Reported-by: Sergey Pashkov
Author: Juan José Santamaría Flecha, Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15789-8fc75dea3c5a17c8@postgresql.org
Backpatch-through: 9.4
This patch reverts all the code changes of commit e76de8861, which turns
out to have been seriously misguided. We can't wait till later to compute
the definition string for an index; we must capture that before applying
the data type change for any column it depends on, else ruleutils.c will
deliverr wrong/misleading results. (This fine point was documented
nowhere, of course.)
I'd also managed to forget that ATExecAlterColumnType executes once per
ALTER COLUMN TYPE clause, not once per statement; which resulted in the
code being basically completely broken for any case in which multiple ALTER
COLUMN TYPE clauses are applied to a table having non-constraint indexes
that must be rebuilt. Through very bad luck, none of the existing test
cases nor the ones added by e76de8861 caught that, but of course it was
soon found in the field.
The previous patch also had an implicit assumption that if a constraint's
index had a dependency on a table column, so would the constraint --- but
that isn't actually true, so it didn't fix such cases.
Instead of trying to delete unneeded index dependencies later, do the
is-there-a-constraint lookup immediately on seeing an index dependency,
and switch to remembering the constraint if so. In the unusual case of
multiple column dependencies for a constraint index, this will result in
duplicate constraint lookups, but that's not that horrible compared to all
the other work that happens here. Besides, such cases did not work at all
before, so it's hard to argue that they're performance-critical for anyone.
Per bug #15865 from Keith Fiske. As before, back-patch to all supported
branches.
Discussion: https://postgr.es/m/15865-17940eacc8f8b081@postgresql.org
Original MIPS-I processors didn't have the LL/SC instructions (nor any
other userland synchronization primitive). If the build toolchain
targets that ISA variant by default, as an astonishingly large fraction
of MIPS platforms still do, the assembler won't take LL/SC without
coercion in the form of a ".set mips2" instruction. But we issued that
unconditionally, making it an ISA downgrade for chips later than MIPS2.
That breaks things for the latest MIPS r6 ISA, which encodes these
instructions differently. Adjust the code so we don't change ISA level
if it's >= 2.
Note that this patch doesn't change what happens on an actual MIPS-I
processor: either the kernel will emulate these instructions
transparently, or you'll get a SIGILL failure. That tradeoff seemed
fine in 2002 when this code was added (cf 3cbe6b247), and it's even
more so today when MIPS-I is basically extinct. But let's add a
comment about that.
YunQiang Su (with cosmetic adjustments by me). Back-patch to all
supported branches.
Discussion: https://postgr.es/m/15844-8f62fe7e163939b3@postgresql.org
This fixes some TAP suites when using msys Perl and a builddir located
in an msys mount point other than "/". For example, builddir=/c/pg
exhibited the problem, since /c/pg falls in mount point "/c".
Back-patch to 9.6, where tests first started to perform such
translations. In back branches, offer both new and old APIs.
Reviewed by Andrew Dunstan.
Discussion: https://postgr.es/m/20190610045838.GA238501@rfd.leadboat.com
This puts back reverted commit de87a084c0a5, with some bug fixes.
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for T1
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for T1
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once T1 releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after T1 finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Discussion: https://postgr.es/m/2815.1560521451@sss.pgh.pa.us
This reverts commits 3da73d6839dc and de87a084c0a5.
This code has some tricky corner cases that I'm not sure are correct and
not properly tested anyway, so I'm reverting the whole thing for next
week's releases (reintroducing the deadlock bug that we set to fix).
I'll try again afterwards.
Discussion: https://postgr.es/m/E1hbXKQ-0003g1-0C@gemulon.postgresql.org
tzdb 2019a made "UCT" a link to the "UTC" zone rather than a separate
zone with its own abbreviation. Unfortunately, our code for choosing a
timezone in initdb has an arbitrary preference for names earlier in
the alphabet, and so it would choose the spelling "UCT" over "UTC"
when the system is running on a UTC zone.
Commit 23bd3cec6 was backpatched in order to address this issue, but
that code helps only when /etc/localtime exists as a symlink, and does
nothing to help on systems where /etc/localtime is a copy of a zone
file (as is the standard setup on FreeBSD and probably some other
platforms too) or when /etc/localtime is simply absent (giving UTC as
the default).
Accordingly, add a preference for the spelling "UTC", such that if
multiple zone names have equally good content matches, we prefer that
name before applying the existing arbitrary rules. Also add a slightly
lower preference for "Etc/UTC"; lower because that preserves the
previous behaviour of choosing the shorter name, but letting us still
choose "Etc/UTC" over "Etc/UCT" when both exist but "UTC" does
not (not common, but I've seen it happen).
Backpatch all the way, because the tzdb change that sparked this issue
is in those branches too.
On many modern platforms, /etc/localtime is a symlink to a file within the
IANA database. Reading the symlink lets us find out the name of the system
timezone directly, without going through the brute-force search embodied in
scan_available_timezones(). This shortens the runtime of initdb by some
tens of ms, which is helpful for the buildfarm, and it also allows us to
reliably select the same zone name the system was actually configured for,
rather than possibly choosing one of IANA's many zone aliases. (For
example, in a system configured for "Asia/Tokyo", the brute-force search
would not choose that name but its alias "Japan", on the grounds of the
latter string being shorter. More surprisingly, "Navajo" is preferred
to either "America/Denver" or "US/Mountain", as seen in an old complaint
from Josh Berkus.)
If /etc/localtime doesn't exist, or isn't a symlink, or we can't make
sense of its contents, or the contents match a zone we know but that
zone doesn't match the observed behavior of localtime(), fall back to
the brute-force search.
Also, tweak initdb so that it prints the zone name it selected.
In passing, replace the last few references to the "Olson" database in
code comments with "IANA", as that's been our preferred term since
commit b2cbced9e.
Back-patch of commit 23bd3cec6. The original intention was to not
back-patch, since this can result in cosmetic behavioral changes ---
for example, on my own workstation initdb now chooses "America/New_York",
where it used to prefer "US/Eastern" which is equivalent and shorter.
However, our hand has been more or less forced by tzdb update 2019a,
which made the "UCT" zone fully equivalent to "UTC". Our old code
now prefers "UCT" on the grounds of it being alphabetically first,
and that's making nobody happy. Choosing the alias indicated by
/etc/localtime is a more defensible behavior. (Users who don't like
the results can always force the decision by setting the TZ environment
variable before running initdb.)
Patch by me, per a suggestion from Robert Haas; review by Michael Paquier
Discussion: https://postgr.es/m/7408.1525812528@sss.pgh.pa.us
Discussion: https://postgr.es/m/20190604085735.GD24018@msg.df7cb.de
When two (or more) transactions are waiting for transaction T1 to release a
tuple-level lock, and transaction T1 upgrades its lock to a higher level, a
spurious deadlock can be reported among the waiting transactions when T1
finishes. The simplest example case seems to be:
T1: select id from job where name = 'a' for key share;
Y: select id from job where name = 'a' for update; -- starts waiting for X
Z: select id from job where name = 'a' for key share;
T1: update job set name = 'b' where id = 1;
Z: update job set name = 'c' where id = 1; -- starts waiting for X
T1: rollback;
At this point, transaction Y is rolled back on account of a deadlock: Y
holds the heavyweight tuple lock and is waiting for the Xmax to be released,
while Z holds part of the multixact and tries to acquire the heavyweight
lock (per protocol) and goes to sleep; once X releases its part of the
multixact, Z is awakened only to be put back to sleep on the heavyweight
lock that Y is holding while sleeping. Kaboom.
This can be avoided by having Z skip the heavyweight lock acquisition. As
far as I can see, the biggest downside is that if there are multiple Z
transactions, the order in which they resume after X finishes is not
guaranteed.
Backpatch to 9.6. The patch applies cleanly on 9.5, but the new tests don't
work there (because isolationtester is not smart enough), so I'm not going
to risk it.
Author: Oleksii Kliukin
Discussion: https://postgr.es/m/B9C9D7CD-EB94-4635-91B6-E558ACEC0EC3@hintbits.com
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
datatype.sgml failed to explain that boolin() accepts any unique
prefix of the basic input strings. Indeed it was actively misleading
because it called out a few minimal prefixes without mentioning that
there were more valid inputs.
I also felt that it wasn't doing anybody any favors by conflating
SQL key words, valid Boolean input, and string literals containing
valid Boolean input. Rewrite in hopes of reducing the confusion.
Per bug #15836 from Yuming Wang, as diagnosed by David Johnston.
Back-patch to supported branches.
Discussion: https://postgr.es/m/15836-656fab055735f511@postgresql.org
Given a query in which multiple JOIN nodes used the same alias
(which'd necessarily be in different sub-SELECTs), ruleutils.c
would assign the JOIN nodes distinct aliases for clarity ...
but then it forgot to print the modified aliases when dumping
the JOIN nodes themselves. This results in a dump/reload hazard
for views, because the emitted query is flat-out incorrect:
Vars will be printed with table names that have no referent.
This has been wrong for a long time, so back-patch to all supported
branches.
Philip Dubé
Discussion: https://postgr.es/m/CY4PR2101MB080246F2955FF58A6ED1FEAC98140@CY4PR2101MB0802.namprd21.prod.outlook.com
ATExecAlterColumnType failed to consider the possibility that an index
that needs to be rebuilt might be a child of a constraint that needs to be
rebuilt. We missed this so far because usually a constraint index doesn't
have a direct dependency on its table, just on the constraint object.
But if there's a WHERE clause, then dependency analysis of the WHERE
clause results in direct dependencies on the column(s) mentioned in WHERE.
This led to trying to drop and rebuild both the constraint and its
underlying index.
In v11/HEAD, we successfully drop both the index and the constraint,
and then try to rebuild both, and of course the second rebuild hits a
duplicate-index-name problem. Before v11, it fails with obscure messages
about a missing relation OID, due to trying to drop the index twice.
This is essentially the same kind of problem noted in commit
20bef2c31: the possible dependency linkages are broader than what
ATExecAlterColumnType was designed for. It was probably OK when
written, but it's certainly been broken since the introduction of
partial exclusion constraints. Fix by adding an explicit check
for whether any of the indexes-to-be-rebuilt belong to any of the
constraints-to-be-rebuilt, and ignoring any that do.
In passing, fix a latent bug introduced by commit 8b08f7d48: in
get_constraint_index() we must "continue" not "break" when rejecting
a relation of a wrong relkind. This is harmless today because we don't
expect that code path to be taken anyway; but if there ever were any
relations to be ignored, the existing coding would have an extremely
undesirable dependency on the order of pg_depend entries.
Also adjust a couple of obsolete comments.
Per bug #15835 from Yaroslav Schekin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/15835-32d9b7a76c06a7a9@postgresql.org
For a non-superuser, changing a comment on a domain constraint was
leading to a cache lookup failure as the code tried to perform the
ownership lookup on the constraint OID itself, thinking that it was a
type, but this check needs to happen on the type the domain constraint
relies on. As the type a domain constraint relies on can be guessed
directly based on the constraint OID, first fetch its type OID and
perform the ownership on it.
This is broken since 7eca575, which has split the handling of comments
for table constraints and domain constraints, so back-patch down to
9.5.
Reported-by: Clemens Ladisch
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/15833-808e11904835d26f@postgresql.org
Backpatch-through: 9.5
Vignesh found this bug in the check function for
default_table_access_method's check hook, but that was just copied
from older GUCs. Investigation by Michael and me then found the bug in
further places.
When not connected to a database (e.g. in a walsender connection), we
cannot perform (most) GUC checks that need database access. Even when
only shared tables are needed, unless they're
nailed (c.f. RelationCacheInitializePhase2()), they cannot be accessed
without pg_class etc. being present.
Fix by extending the existing IsTransactionState() checks to also
check for MyDatabaseOid.
Reported-By: Vignesh C, Michael Paquier, Andres Freund
Author: Vignesh C, Andres Freund
Discussion: https://postgr.es/m/CALDaNm1KXK9gbZfY-p_peRFm_XrBh1OwQO1Kk6Gig0c0fVZ2uw%40mail.gmail.com
Backpatch: 9.4-
Descriptions of pg_trgm GUC options have % replaced with %% like it was
a printf-like format. But that's not needed since they are just plain strings.
This commit fixed that. Backpatch to last supported version since this error
present from the beginning.
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoAgPKODUsu9gqUFiNqEOAqedStxJ-a0sapsJXWWAVp%3Dxg%40mail.gmail.com
Backpatch-through: 9.4
5871b884 introduced pg_trgm.word_similarity_threshold GUC, but its documentation
contains wrong indentation. This commit fixes that. Backpatch for easier
backpatching of other documentation fixes.
Discussion: https://postgr.es/m/4c735d30-ab59-fc0e-45d8-f90eb5ed3855%402ndquadrant.com
Author: Ian Barwick
Backpatch-through: 9.6
It's harmless to call PQfreemem() with a NULL argument, so the only
consequence was that if allocating 'schema' failed, but allocating 'table'
or 'field' succeeded, we would leak a bit of memory. That's highly
unlikely to happen, so this is just academical, but let's get it right.
Per bug #15838 from Timur Birsh. Backpatch back to 9.5, where the
PQfreemem() calls were introduced.
Discussion: https://www.postgresql.org/message-id/15838-3221652c72c5e69d@postgresql.org
When this code was initially introduced in commit d1b7c1ff, the structure
used was SharedPlanStateInstrumentation, but later when it got changed to
Instrumentation structure in commit b287df70, we forgot to update the
comment.
Reported-by: Wu Fei
Author: Wu Fei
Reviewed-by: Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/52E6E0843B9D774C8C73D6CF64402F0562215EB2@G08CNEXMBPEKD02.g08.fujitsu.local
A parallel worker process should not be making any decisions of its
own about whether to auto-explain. If the parent session process
passed down flags asking for instrumentation data, do that, otherwise
not. Trying to enable instrumentation anyway leads to bugs like the
"could not find key N in shm TOC" failure reported in bug #15821
from Christian Hofstaedtler.
We can implement this cheaply by piggybacking on the existing logic
for not doing anything when we've chosen not to sample a statement.
While at it, clean up some tin-eared coding related to the sampling
feature, including an off-by-one error that meant that asking for 1.0
sampling rate didn't actually result in sampling every statement.
Although the specific case reported here only manifested in >= v11,
I believe that related misbehaviors can be demonstrated in any version
that has parallel query; and the off-by-one error is certainly there
back to 9.6 where that feature was added. So back-patch to 9.6.
Discussion: https://postgr.es/m/15821-5eb422e980594075@postgresql.org
Support of CHECK OPTION for updatable views has been added in 9.4, but
the documentation of information_schema never got the call even if the
information displayed is correct.
Author: Gilles Darold
Discussion: https://postgr.es/m/75d07704-6c74-4f26-656a-10045c01a17e@darold.net
Backpatch-through: 9.4
My back-patch of commit 10b72deafea5972edcafb9eb3f97154f32ccd340 added
calls to File::Path::rmtree(), but v10 and older had not been importing
that symbol. Back-patch to v10, 9.6 and 9.5.
When this suite runs installcheck, redirect file creations from
src/test/regress to src/bin/pg_upgrade/tmp_check/regress. This closes a
race condition in "make -j check-world". If the pg_upgrade suite wrote
to a given src/test/regress/results file in parallel with the regular
src/test/regress invocation writing it, a test failed spuriously. Even
without parallelism, in "make -k check-world", the suite finishing
second overwrote the other's regression.diffs. This revealed test
"largeobject" assuming @abs_builddir@ is getcwd(), so fix that, too.
Buildfarm client REL_10, released fifty-four days ago, supports saving
regression.diffs from its new location. When an older client reports a
pg_upgradeCheck failure, it will no longer include regression.diffs.
Back-patch to 9.5, where pg_upgrade moved to src/bin.
Reviewed (in earlier versions) by Andrew Dunstan.
Discussion: https://postgr.es/m/20181224034411.GA3224776@rfd.leadboat.com
This allows "vcregress upgradecheck" to pass twice in immediate
succession, and it's more like how $(prove_check) works. Back-patch to
9.5, where pg_upgrade moved to src/bin.
Discussion: https://postgr.es/m/20190520012436.GA1480421@rfd.leadboat.com
