When RETURNING is specified, ExecDelete would return a virtual-tuple slot
that could contain pointers into an already-unpinned disk buffer. Another
process could change the buffer contents before we get around to using the
data, resulting in garbage results or even a crash. This seems of fairly
low probability, which may explain why there are no known field reports of
the problem, but it's definitely possible. Fix by forcing the result slot
to be "materialized" before we release pin on the disk buffer.
Back-patch to 9.0; in earlier branches there is no bug because
ExecProcessReturning sent the tuple to the destination immediately. Also,
this is already fixed in HEAD as part of the writable-foreign-tables patch
(where the fix is necessary for DELETE RETURNING to work at all with
postgres_fdw).
The previous coding of this function could get into situations where it
would never terminate, because successive passes would re-add EMPTY arcs
that had been removed by the previous pass. Rewrite the function
completely using a new algorithm that is guaranteed to terminate, and
also seems to be usually faster than the old one. Per Tcl bugs 3604074
and 3606683.
Tom Lane and Don Porter
If we were about to enter archive recovery after crash recovery, we scanned
the archive for the latest tli history file, and set the recovery target
timeline to that. However, when we actually tried to read the history file,
we would not fetch the file from the archive, because we were not in archive
recovery yet.
To fix, make readTimeLineHistory and existsTimeLineHistory to always fetch
the file from archive if archive recovery is requested, even if we're not in
archive recovery yet.
Backpatch to 9.2. Mitsumasa KONDO
I missed to returns in the middle of ReadRecord function in my previous fix.
If a WAL file was not found at all during crash recovery, XLogPageRead would
return 'false', and ReadRecord would return without entering archive recovery.
9.2 only. In master, the code is structured differently and does not have this
problem.
Kyotaro HORIGUCHI, Mitsumasa KONDO and me.
formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY'). Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I". To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters. Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate. Per bug #7913 from Adnan Dursun. Back-patch to all active
branches, since it's been like this for a long time.
I fixed this code back in commit 841b4a2d5, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00. Per report from Magnus Hagander.
fmgr_sql had been designed on the assumption that the FmgrInfo it's called
with has only query lifespan. This is demonstrably unsafe in connection
with range types, as shown in bug #7881 from Andrew Gierth. Fix things
so that we re-generate the function's cache data if the (sub)transaction
it was made in is no longer active.
Back-patch to 9.2. This might be needed further back, but it's not clear
whether the case can realistically arise without range types, so for now
I'll desist from back-patching further.
Careless use of TopMemoryContext for I/O function data meant that repeated
use of spi_prepare and spi_freeplan would leak memory at the session level,
as per report from Christian Schröder. In addition, spi_prepare
leaked a lot of transient data within the current plperl function's SPI
Proc context, which would be a problem for repeated use of spi_prepare
within a single plperl function call; and it wasn't terribly careful
about releasing permanent allocations in event of an error, either.
In passing, clean up some copy-and-pasteos in query-lookup error messages.
Alex Hunsaker and Tom Lane
parseqatom() failed to check for an error return (NULL result) from its
recursive call to parsebranch(), and in consequence could crash with a
null-pointer dereference after an error return. This bug has been there
since day one, but wasn't noticed before, probably because most error cases
in parsebranch() didn't actually lead to returning NULL. Add the missing
error check, and also tweak parsebranch() to exit in a less indirect
fashion after a call to parseqatom() fails.
Report by Tomasz Karlik, fix by me.
We must still initialize minRecoveryPoint if we start straight with archive
recovery, e.g when recovering from a normal base backup taken with
pg_start/stop_backup. Otherwise we never consider the system consistent.
If you create a base backup using an atomic filesystem snapshot, and try to
perform PITR starting from that base backup, or if you just kill a master
server and create recovery.conf to put it into standby mode, we don't know
how far we need to recover before reaching consistency. Normally in crash
recovery, we replay all the WAL present in pg_xlog, and assume that we're
consistent after that. And normally in archive recovery, minRecoveryPoint,
backupEndRequired, or backupEndPoint is set in the control file, indicating
how far we need to replay to reach consistency. But if the server was
previously up and running normally, and you kill -9 it or take an atomic
filesystem snapshot, none of those fields are set in the control file.
The solution is to perform crash recovery first, replaying all the WAL in
pg_xlog. After that's done, we assume that the system is consistent like in
normal crash recovery, and switch to archive recovery mode after that.
Per report from Kyotaro HORIGUCHI. In his scenario, recovery.conf was
created after "pg_ctl stop -m i". I'm not sure we need to support that exact
scenario, but we should support backing up using a filesystem snapshot,
which looks identical.
This issue goes back to at least 9.0, where hot standby was introduced and
we started to track when consistency is reached. In 9.1 and 9.2, we would
open up for hot standby too early, and queries could briefly see an
inconsistent state. But 9.2 made it more visible, as we started to PANIC if
we see a reference to a non-existing page during recovery, if we've already
reached consistency. This is a fairly big patch, so back-patch to 9.2 only,
where the issue is more visible. We can consider back-patching further after
this has received some more testing in 9.2 and master.
If a database name contained a '=' character, pg_dumpall failed. The problem
was in the way pg_dumpall passes the database name to pg_dump on the
command line. If it contained a '=' character, pg_dump would interpret it
as a libpq connection string instead of a plain database name.
To fix, pass the database name to pg_dump as a connection string,
"dbname=foo", with the database name escaped if necessary.
Back-patch to all supported branches.
Revert my earlier fix for the bug that unarchived WAL files get deleted on
crash recovery, commit c9cc7e05c6d82a9781883a016c70d95aa4923122. We create
a .done file for files streamed or restored from archive, so the WAL file
recycling logic used during normal operation works just as well during
archive recovery.
Per Fujii Masao's suggestion.
Cases such as similarity('', '') produced a NaN result due to computing
0/0. Per discussion, make it return zero instead.
This appears to be the basic cause of bug #7867 from Michele Baravalle,
although it remains unclear why her installation doesn't think Cyrillic
letters are letters.
Back-patch to all active branches.
Since a backend adds itself to the global listener array during
Exec_ListenPreCommit, it's inappropriate for it to remove itself during
Exec_UnlistenCommit or Exec_UnlistenAllCommit --- that leads to failure
when committing a transaction that did UNLISTEN then LISTEN, since we end
up not registered though we should be. (This leads to missing later
notifications, or to Assert failures in assert-enabled builds.) Instead
deal with deregistering at the bottom of AtCommit_Notify, when we know the
final state of the listenChannels list.
Also, simplify the representation of registration status by replacing the
transient backendHasExecutedInitialListen flag with an amRegisteredListener
flag.
Per report from Greg Sabino Mullane. Back-patch to 9.0, where the problem
was introduced during the LISTEN/NOTIFY rewrite.
After further reflection I was unconvinced that the existing coding is
guaranteed to return valid union datums in every code path for multi-column
indexes. Fix that by forcing a gistunionsubkey() call at the end of the
recursion. Having done that, we can remove some clearly-redundant calls
elsewhere. This should be a little faster for multi-column indexes (since
the previous coding would uselessly do such a call for each column while
unwinding the recursion), as well as much harder to break.
Also, simplify the handling of cases where one side or the other of a
primary split contains only don't-care tuples. The previous coding used a
very ugly hack in removeDontCares() that essentially forced one random
tuple to be treated as non-don't-care, providing a random initial choice of
seed datum for the secondary split. It seems unlikely that that method
will give better-than-random splits. Instead, treat such a split as
degenerate and just let the next column determine the split, the same way
that we handle fully degenerate cases where the two sides produce identical
union datums.
This LOG message was put in over five years ago with the evident
expectation that we'd make all GiST opclasses support secondary split
directly. However, no such thing ever happened, and indeed the number of
opclasses supporting it decreased to zero in 9.2. The reason is that
improving on the default implementation isn't that easy --- the
opclass-specific code that did exist, before 9.2, doesn't appear to have
been any improvement over the default.
Hence, remove the message altogether. There's certainly no point in
nagging users about this in released branches, but I doubt that we'll
ever implement complete opclass-specific support anyway.
Not only is this implementation of secondary-split not better than the
default implementation in gistsplit.c, it's actually worse. The gistsplit.c
code at least looks to see if switching the left and right sides would make
a better merge with the previously-split tuples, while this doesn't.
In any case it's rather useless to support secondary split only in an edge
case. There used to be more complete support for it here (in chooseLR()),
but that was removed in commit 7f3bd86843e5aad84585a57d3f6b80db3c609916.
It appears to me though that the chooseLR() code was really isomorphic to
the default implementation, since it was still based on choosing the cheaper
way of adding two sub-split vectors that had been chosen without regard to
the primary split initially. I think an implementation of secondary split
that could beat the default implementation would have to be pretty fully
integrated into the split algorithm, not plastered on at the end.
Back-patch to 9.2, but not further; previous branches have the chooseLR()
code which I don't feel a great need to mess with. This is mainly so we
just have two behaviors and not three among the various branches (IOW, this
patch is cleanup for commit 7f3bd86843e5aad84585a57d3f6b80db3c609916's
incomplete removal of secondary-split support).
Improve comments, rename some variables and functions, slightly simplify
a couple of APIs, in an attempt to make this code readable by people other
than its original author.
Even though this is essentially just cosmetic, back-patch to all active
branches, because otherwise it's going to make back-patching future fixes
in this file very painful.
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
Commit af7914c6627bcf0b0ca614e9ce95d3f8056602bf, which added the TIMING
option to EXPLAIN, had an oversight: if the TIMING option is disabled
then control in InstrStartNode() goes through an elog(DEBUG2) call, which
typically does nothing but takes a noticeable amount of time to do it.
Tweak the logic to avoid that.
In HEAD, also change the elog(DEBUG2)'s in instrument.c to elog(ERROR).
It's not very clear why they weren't like that to begin with, but this
episode shows that not complaining more vociferously about misuse is
likely to do little except allow bugs to remain hidden.
While at it, adjust some code that was making possibly-dangerous
assumptions about flag bits being in the rightmost byte of the
instrument_options word.
Problem reported by Pavel Stehule (via Tomas Vondra).
The previous coding supposed that the first differing bytes in two varlena
datums must have the same sign difference as their overall comparison
result. This is obviously bogus for text strings in non-C locales, and
probably wrong for numeric, and even for bytea I think it was wrong on
machines where char is signed. When the assumption failed, the function
could deliver a zero or negative penalty in situations where such a result
is quite ridiculous, leading the core GiST code to make very bad page-split
decisions.
To fix, take the absolute values of the byte-level differences. Also,
switch the code to using unsigned char not just char, so that the behavior
will be consistent whether char is signed or not.
Per investigation of a trouble report from Tomas Vondra. Back-patch to all
supported branches.
gbt_var_bin_union() failed to do the right thing when the existing range
needed to be widened at both ends rather than just one end. This could
result in an invalid index in which keys that are present would not be
found by searches, because the searches would not think they need to
descend to the relevant leaf pages. This error affected all the varlena
datatypes supported by btree_gist (text, bytea, bit, numeric).
Per investigation of a trouble report from Tomas Vondra. (There is also
an issue in gbt_var_penalty(), but that should only result in inefficiency
not wrong answers. I'm committing this separately so that we have a git
state in which it can be tested that bad penalty results don't produce
invalid indexes.) Back-patch to all supported branches.
When considering a non-last column in a multi-column GiST index,
gistsplit.c tries to improve on the split chosen by the opclass-specific
pickSplit function by considering penalties for the next column. However,
there were two bugs in this code: it failed to recompute the union keys for
the leftmost index columns, even though these might well change after
reassigning tuples; and it included the old union keys in the recomputation
for the columns it did recompute, so that those keys couldn't get smaller
even if they should. The first problem could result in an invalid index
in which searches wouldn't find index entries that are in fact present;
the second would make the index less efficient to search.
Both of these errors were caused by misuse of gistMakeUnionItVec, whose
API was designed in a way that just begged such errors to be made. There
is no situation in which it's safe or useful to compute the union keys for
a subset of the index columns, and there is no caller that wants any
previous union keys to be included in the computation; so the undocumented
choice to treat the union keys as in/out rather than pure output parameters
is a waste of code as well as being dangerous.
Hence, rather than just making a minimal patch, I've changed the API of
gistMakeUnionItVec to remove the "startkey" parameter (it now always
processes all index columns) and treat the attr/isnull arrays as purely
output parameters.
In passing, also get rid of a couple of unnecessary and dangerous uses
of static variables in gistutil.c. It's remarkable that the one in
gistMakeUnionKey hasn't given us portability troubles before now, because
in addition to posing a re-entrancy hazard, it was unsafely assuming that
a static char[] array would have at least Datum alignment.
Per investigation of a trouble report from Tomas Vondra. (There are also
some bugs in contrib/btree_gist to be fixed, but that seems like material
for a separate patch.) Back-patch to all supported branches.
Normally, we suppress sending a tabstats message to the collector unless
there were some actual table stats to send. However, during backend exit
we should force out the message if there are any transaction commit/abort
counts to send, else the session's last few commit/abort counts will never
get reported at all. We had logic for this, but the short-circuit test
at the top of pgstat_report_stat() ignored the "force" flag, with the
consequence that session-ending transactions that touched no database-local
tables would not get counted. Seems to be an oversight in my commit
641912b4d17fd214a5e5bae4e7bb9ddbc28b144b, which added the "force" flag.
That was back in 8.3, so back-patch to all supported versions.
This function was misdeclared to take cstring when it should take internal.
This at least allows crashing the server, and in principle an attacker
might be able to use the function to examine the contents of server memory.
The correct fix is to adjust the system catalog contents (and fix the
regression tests that should have caught this but failed to). However,
asking users to correct the catalog contents in existing installations
is a pain, so as a band-aid fix for the back branches, install a check
in enum_recv() to make it throw error if called with a cstring argument.
We will later revert this in HEAD in favor of correcting the catalogs.
Our thanks to Sumit Soni (via Secunia SVCRP) for reporting this issue.
Security: CVE-2013-0255
The original code used freeze_min_age instead of freeze_table_age. The
main consequence of this mistake is that lowering freeze_min_age would
cause full-table scans to occur much more frequently, which causes
serious issues because the number of writes required is much larger.
That feature (freeze_min_age) is supposed to affect only how soon tuples
are frozen; some pages should still be skipped due to the visibility
map.
Backpatch to 8.4, where the freeze_table_age feature was introduced.
Report and patch from Andres Freund
This ensure the version number increases over time. The first three digits
in the version number is still set to the actual PostgreSQL version
number, but the last one is intended to be an ever increasing build number,
which previosly failed when it changed between 1, 2 and 3 digits long values.
Noted by Deepak
exec_simple_check_plan and exec_eval_simple_expr attempted to call
GetCachedPlan directly. This meant that if an error was thrown during
planning, the resulting context traceback would not include the line
normally contributed by _SPI_error_callback. This is already inconsistent,
but just to be really odd, a re-execution of the very same expression
*would* show the additional context line, because we'd already have cached
the plan and marked the expression as non-simple.
The problem is easy to demonstrate in 9.2 and HEAD because planning of a
cached plan doesn't occur at all until GetCachedPlan is done. In earlier
versions, it could only be an issue if initial planning had succeeded, then
a replan was forced (already somewhat improbable for a simple expression),
and the replan attempt failed. Since the issue is mainly cosmetic in older
branches anyway, it doesn't seem worth the risk of trying to fix it there.
It is worth fixing in 9.2 since the instability of the context printout can
affect the results of GET STACKED DIAGNOSTICS, as per a recent discussion
on pgsql-novice.
To fix, introduce a SPI function that wraps GetCachedPlan while installing
the correct callback function. Use this instead of calling GetCachedPlan
directly from plpgsql.
Also introduce a wrapper function for extracting a SPI plan's
CachedPlanSource list. This lets us stop including spi_priv.h in
pl_exec.c, which was never a very good idea from a modularity standpoint.
In passing, fix a similar inconsistency that could occur in SPI_cursor_open,
which was also calling GetCachedPlan without setting up a context callback.
Such cases should work, but the grammar failed to accept them because of
our ancient precedence hacks to convince bison that extra parentheses
around a sub-SELECT in an expression are unambiguous. (Formally, they
*are* ambiguous, but we don't especially care whether they're treated as
part of the sub-SELECT or part of the expression. Bison cares, though.)
Fix by adding a redundant-looking production for this case.
This is a fine example of why fixing shift/reduce conflicts via
precedence declarations is more dangerous than it looks: you can easily
cause the parser to reject cases that should work.
This has been wrong since commit 3db4056e22b0c6b2adc92543baf8408d2894fe91
or maybe before, and apparently some people have been working around it
by inserting no-op casts. That method introduces a dump/reload hazard,
as illustrated in bug #7838 from Jan Mate. Hence, back-patch to all
active branches.
My "fix" for bugs #7578 and #6116 on DROP OWNED at fe3b5eb08a1 not only
misstated that it applied to REASSIGN OWNED (which it did not affect),
but it also failed to fix the problems fully, because I didn't test the
case of owned shared objects. Thus I created a new bug, reported by
Thomas Kellerer as #7748, which would cause DROP OWNED to fail with a
not-for-user-consumption error message. The code would attempt to drop
the database, which not only fails to work because the underlying code
does not support that, but is a pretty dangerous and undesirable thing
to be doing as well.
This patch fixes that bug by having DROP OWNED only attempt to process
shared objects when grants on them are found, ignoring ownership.
Backpatch to 8.3, which is as far as the previous bug was backpatched.
plpython tried to use a single cache entry for a trigger function, but it
needs a separate cache entry for each table the trigger is applied to,
because there is table-dependent data in there. This was done correctly
before 9.1, but commit 46211da1b84bc3537e799ee1126098e71c2428e8 broke it
by simplifying the lookup key from "function OID and triggered table OID"
to "function OID and is-trigger boolean". Go back to using both OIDs
as the lookup key. Per bug report from Sandro Santilli.
Andres Freund
