This applies portions of commits b64b5ccb6 and b1aebbb6a to the older
branches, in hopes of getting -Werror builds to succeed there. The
applied changes simply remove useless tests, eg checking an unsigned
variable to see if it is >= 0. Recent versions of clang warn about
such tests by default.
Also add to the existing rather half-baked description of PROFILE,
which does exactly the same thing, but I think people use it differently.
Discussion: https://postgr.es/m/16461.1487361849@sss.pgh.pa.us
The loops in ExecHashJoinNewBatch(), ExecHashIncreaseNumBatches(), and
ExecHashRemoveNextSkewBucket() are all capable of iterating over many
tuples without ever doing a CHECK_FOR_INTERRUPTS, so that the backend
might fail to respond to SIGINT or SIGTERM for an unreasonably long time.
Fix that. In the case of ExecHashJoinNewBatch(), it seems useful to put
the added CHECK_FOR_INTERRUPTS into ExecHashJoinGetSavedTuple() rather
than directly in the loop, because that will also ensure that both
principal code paths through ExecHashJoinOuterGetTuple() will do a
CHECK_FOR_INTERRUPTS, which seems like a good idea to avoid surprises.
Back-patch to all supported branches.
Tom Lane and Thomas Munro
Discussion: https://postgr.es/m/6044.1487121720@sss.pgh.pa.us
The ALTER TABLE ALTER TYPE implementation can issue DROP INDEX and
CREATE INDEX to refit existing indexes for the new column type. Since
this CREATE INDEX is an implementation detail of an index alteration,
the ensuing DefineIndex() should skip ACL checks specific to index
creation. It already skips the namespace ACL check. Make it skip the
tablespace ACL check, too. Back-patch to 9.2 (all supported versions).
Reviewed by Tom Lane.
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
The problem with the original coding here is that we might receive (and
clear) a relcache invalidation signal for the target relation down inside
one of the index_open calls we're doing. Since the target is open, we
would not drop the relcache entry, just reset its rd_indexvalid and
rd_indexlist fields. But RelationGetIndexAttrBitmap() kept going, and
would eventually cache and return potentially-obsolete attribute bitmaps.
The case where this matters is where the inval signal was from a CREATE
INDEX CONCURRENTLY telling us about a new index on a formerly-unindexed
column. (In all other cases, the lock we hold on the target rel should
prevent any concurrent change in index state.) Even just returning the
stale attribute bitmap is not such a problem, because it shouldn't matter
during the transaction in which we receive the signal. What hurts is
caching the stale data, because it can survive into later transactions,
breaking CREATE INDEX CONCURRENTLY's expectation that later transactions
will not create new broken HOT chains. The upshot is that there's a window
for building corrupted indexes during CREATE INDEX CONCURRENTLY.
This patch fixes the problem by rechecking that the set of index OIDs
is still the same at the end of RelationGetIndexAttrBitmap() as it was
at the start. If not, we loop back and try again. That's a little
more than is strictly necessary to fix the bug --- in principle, we
could return the stale data but not cache it --- but it seems like a
bad idea on general principles for relcache to return data it knows
is stale.
There might be more hazards of the same ilk, or there might be a better
way to fix this one, but this patch definitely improves matters and seems
unlikely to make anything worse. So let's push it into today's releases
even as we continue to study the problem.
Pavan Deolasee and myself
Discussion: https://postgr.es/m/CABOikdM2MUq9cyZJi1KyLmmkCereyGp5JQ4fuwKoyKEde_mzkQ@mail.gmail.com
DST law changes in northern Cyprus (new zone Asia/Famagusta), Russia (new
zone Europe/Saratov), Tonga, Antarctica/Casey. Historical corrections for
Asia/Aqtau, Asia/Atyrau, Asia/Gaza, Asia/Hebron, Italy, Malta. Replace
invented zone abbreviation "TOT" for Tonga with numeric UTC offset; but
as in the past, we'll keep accepting "TOT" for input.
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
Hot_standby_feedback could be reset by reload and worked correctly, but if
the server was restarted rather than reloaded the xmin was not reset.
Force reset always if hot_standby_feedback is enabled at startup.
Ants Aasma, Craig Ringer
Reported-by: Ants Aasma
!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector. ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer. Remove the premature optimization.
Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.
Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.
Discussion: https://postgr.es/m/20170126025524.1434.97828@wrigleys.postgresql.org
This reverts commit df9e034f958a5cd092f7f461d7a50156f6d076af, which
tried to fix the comments to reflect the change of API of the function
but actually the change had been made only for 9.5 or later.
The interface for the function was changed in
d72731a70450b5e7084991b9caa15cb58a2820df but the comments of the
function was not updated.
Patch by Yugo Nagata.
When (1) autovacuum = off and (2) there's at least one database with
an XID age greater than autovacuum_freeze_max_age and (3) all tables
in that database that need vacuuming are already being processed by a
worker and (4) the autovacuum launcher is started, a kind of infinite
loop occurs. The launcher starts a worker and immediately exits. The
worker, finding no worker to do, immediately starts the launcher,
supposedly so that the next database can be processed. But because
datfrozenxid for that database hasn't been advanced yet, the new
worker gets put right back into the same database as the old one,
where it once again starts the launcher and exits. High-speed ping
pong ensues.
There are several possible ways to break the cycle; this seems like
the safest one.
Amit Khandekar (code) and Robert Haas (comments), reviewed by
Álvaro Herrera.
Discussion: http://postgr.es/m/CAJ3gD9eWejf72HKquKSzax0r+epS=nAbQKNnykkMA0E8c+rMDg@mail.gmail.com
Thinko in commit a4523c5aa. It doesn't really affect anything at
present, but it would be a problem if any tests added later in this
file ought to get index-only-scan plans. Back-patch, like the previous
commit, just to avoid surprises in case we add such a test and then
back-patch it.
Nikita Glukhov
Discussion: https://postgr.es/m/8b70135d-ad38-bdd8-ac92-71e2b3c273cf@postgrespro.ru
These macros work fine when they are used directly in an "if" test or
similar, but as soon as the return values are assigned to boolean
variables (or passed as boolean arguments to some function), they become
bugs, hopefully caught by compiler warnings. To avoid future problems,
fix the definitions so that they return actual booleans.
To further minimize the risk that somebody uses them in back-patched
fixes that only work correctly in branches starting from the current
master and not in old ones, back-patch the change to supported branches
as appropriate.
See also commit af4472bcb88ab36b9abbe7fd5858e570a65a2d1a, and the long
discussion (and larger patch) in the thread mentioned in its commit
message.
Discussion: https://postgr.es/m/18672.1483022414@sss.pgh.pa.us
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier
Reviewed-By: Kyotaro Horiguchi and me
Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
A client copy can't work inside a function because the FE/BE wire protocol
doesn't support nesting of a COPY operation within query results. (Maybe
it could, but the protocol spec doesn't suggest that clients should support
this, and libpq for one certainly doesn't.)
In most PLs, this prohibition is enforced by spi.c, but SQL functions don't
use SPI. A comparison of _SPI_execute_plan() and init_execution_state()
shows that rejecting client COPY is the only discrepancy in what they
allow, so there's no other similar bugs.
This is an astonishingly ancient oversight, so back-patch to all supported
branches.
Report: https://postgr.es/m/BY2PR05MB2309EABA3DEFA0143F50F0D593780@BY2PR05MB2309.namprd05.prod.outlook.com
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
This fixes problems where a plan must change but fails to do so,
as seen in a bug report from Rajkumar Raghuwanshi.
For ALTER FOREIGN TABLE OPTIONS, do this through the standard method of
forcing a relcache flush on the table. For ALTER FOREIGN DATA WRAPPER
and ALTER SERVER, just flush the whole plan cache on any change in
pg_foreign_data_wrapper or pg_foreign_server. That matches the way
we handle some other low-probability cases such as opclass changes, and
it's unclear that the case arises often enough to be worth working harder.
Besides, that gives a patch that is simple enough to back-patch with
confidence.
Back-patch to 9.3. In principle we could apply the code change to 9.2 as
well, but (a) we lack postgres_fdw to test it with, (b) it's doubtful that
anyone is doing anything exciting enough with FDWs that far back to need
this desperately, and (c) the patch doesn't apply cleanly.
Patch originally by Amit Langote, reviewed by Etsuro Fujita and Ashutosh
Bapat, who each contributed substantial changes as well.
Discussion: https://postgr.es/m/CAKcux6m5cA6rRPTKkqVdJ-R=KKDfe35Q_ZuUqxDSV_4hwga=og@mail.gmail.com
array_fill(..., array[0]) produced an empty array, which is probably
what users expect, but it was a one-dimensional zero-length array
which is not our standard representation of empty arrays. Also, for
no very good reason, it rejected empty input arrays; that case should
be allowed and produce an empty output array.
In passing, remove the restriction that the input array(s) have lower
bound 1. That seems rather pointless, and it would have needed extra
complexity to make the check deal with empty input arrays.
Per bug #14487 from Andrew Gierth. It's been broken all along, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170105152156.10135.64195@wrigleys.postgresql.org
Inheritance operations must treat the OID column, if any, much like
regular user columns. But MergeAttributesIntoExisting() neglected to
do that, leading to weird results after a table with OIDs is associated
to a parent with OIDs via ALTER TABLE ... INHERIT.
Report and patch by Amit Langote, reviewed by Ashutosh Bapat, some
adjustments by me. It's been broken all along, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/cb13cfe7-a48c-5720-c383-bb843ab28298@lab.ntt.co.jp
That was written when we still had "crypt" authentication, and it was
referring to the fact that an older client might support "crypt"
authentication but not "md5". But we haven't supported "crypt" for years.
(As soon as we add a new authentication mechanism that doesn't work with
MD5 hashes, we'll need a similar notice again. But this text as it's worded
now is just wrong.)
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/9a7263eb-0980-2072-4424-440bb2513dc7@iki.fi
In GetCachedPlan(), initialize 'plan' to silence a compiler warning, but
also add an Assert() to make sure we don't ever actually fall through
with 'plan' still being set to NULL, since we are about to dereference
it.
Back-patch back to 9.2.
Author: Stephen Frost
Discussion: https://postgr.es/m/20161129152102.GR13284%40tamriel.snowman.net
Bison >=3.0 issues warnings about
%name-prefix="base_yy"
instead of the now preferred
%name-prefix "base_yy"
but the latter doesn't work with Bison 2.3 or less. So for now we
silence the deprecation warnings.
Back-patch to 9.2 and 9.3 -- the newer branches already have this fix.
Author: Peter Eisentraut
Discussion: https://postgr.es/m/677.1483384145%40sss.pgh.pa.us
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Discussion: https://postgr.es/m/20161227172307.10135.7747@wrigleys.postgresql.org
In addition to space accounted for by tuple_len, dead_tuple_len and
free_space, the table_len includes page overhead, the item pointers
table and padding bytes.
Backpatch to live branches.
hashname() asserted that the key string it is given is shorter than
NAMEDATALEN. That should surely always be true if the input is in fact a
regular value of type "name". However, for reasons of coding convenience,
we allow plain old C strings to be treated as "name" values in many places.
Some SQL functions accept arbitrary "text" inputs, convert them to C
strings, and pass them otherwise-untransformed to syscache lookups for name
columns, allowing an overlength input value to trigger hashname's Assert.
This would be a DOS problem, except that it only happens in assert-enabled
builds which aren't recommended for production. In a production build,
you'll just get a name lookup error, since regardless of the hash value
computed by hashname, the later equality comparison checks can't match.
Likewise, if the catalog lookup is done by seqscan or indexscan searches,
there will just be a lookup error, since the name comparison functions
don't contain any similar length checks, and will see an overlength input
as unequal to any stored entry.
After discussion we concluded that we should simply remove this Assert.
It's inessential to hashname's own functionality, and having such an
assertion in only some paths for name lookup is more of a foot-gun than
a useful check. There may or may not be a case for the affected callers
to do something other than let the name lookup fail, but we'll consider
that separately; in any case we probably don't want to change such
behavior in the back branches.
Per report from Tushar Ahuja. Back-patch to all supported branches.
Report: https://postgr.es/m/7d0809ee-6f25-c9d6-8e74-5b2967830d49@enterprisedb.com
Discussion: https://postgr.es/m/17691.1482523168@sss.pgh.pa.us
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Discussion: https://www.postgresql.org/message-id/1614593c-e356-5b27-6dba-66320a9bc68b@dalibo.com
When we are altering a text search configuration, we are getting the
tuple from pg_ts_config and using its OID, so use TSConfigRelationId
when invoking any post-alter hooks and setting the object address.
Further, in the functions called from AlterTSConfiguration(), we're
saving information about the command via
EventTriggerCollectAlterTSConfig(), so we should be setting
commandCollected to true. Also add a regression test to
test_ddl_deparse for ALTER TEXT SEARCH CONFIGURATION.
Author: Artur Zakirov, a few additional comments by me
Discussion: https://www.postgresql.org/message-id/57a71eba-f2c7-e7fd-6fc0-2126ec0b39bd%40postgrespro.ru
Back-patch the fix for the InvokeObjectPostAlterHook() call to 9.3 where
it was introduced, and the fix for the ObjectAddressSet() call and
setting commandCollected to true to 9.5 where those changes to
ProcessUtilitySlow() were introduced.
You can't just cast a HashMetaPage to a Page, because the meta page
data is stored after the page header, not at offset 0. Fortunately,
this didn't break anything because it happens to find hashm_bsize
at the offset at which it expects to find pd_pagesize_version, and
the values are close enough to the same that this works out.
Still, it's a bug, so back-patch to all supported versions.
Mithun Cy, revised a bit by me.
When libpq encounters a connection-level error, e.g. runs out of memory
while forming a result, there will be no error associated with PGresult,
but a message will be placed into PGconn's error buffer. postgres_fdw
takes care to use the PGconn error message when PGresult does not have
one, but dblink has been negligent in that regard. Modify dblink to mirror
what postgres_fdw has been doing.
Back-patch to all supported branches.
Author: Joe Conway
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/02fa2d90-2efd-00bc-fefc-c23c00eb671e%40joeconway.com
When dblink uses a postgres_fdw server name for its connection, it
is possible for the connection to have options that are invalid
with dblink (e.g. "updatable"). The recommended way to avoid this
problem is to use dblink_fdw servers instead. However there are use
cases for using postgres_fdw, and possibly other FDWs, for dblink
connection options, therefore protect against trying to use any
options that do not apply by using is_valid_dblink_option() when
building the connection string from the options.
Back-patch to 9.3. Although 9.2 supports FDWs for connection info,
is_valid_dblink_option() did not yet exist, and neither did
postgres_fdw, at least in the postgres source tree. Given the lack
of previous complaints, fixing that seems too invasive/not worth it.
Author: Corey Huinker
Reviewed-By: Joe Conway
Discussion: https://postgr.es/m/CADkLM%3DfWyXVEyYcqbcRnxcHutkP45UHU9WD7XpdZaMfe7S%3DRwA%40mail.gmail.com
When dblink or postgres_fdw detects an error on the remote side of the
connection, it will try to construct a local error message as best it
can using libpq's PQresultErrorField(). When no primary message is
available, it was bailing out with an unhelpful "unknown error". Make
that message better and more style guide compliant. Per discussion
on hackers.
Backpatch to 9.2 except postgres_fdw which didn't exist before 9.3.
Discussion: https://postgr.es/m/19872.1482338965%40sss.pgh.pa.us
The U&'...' and U&"..." syntaxes silently discarded a surrogate pair
start (that is, a code between U+D800 and U+DBFF) if it occurred at
the very end of the string. This seems like an obvious oversight,
since we throw an error for every other invalid combination of surrogate
characters, including the very same situation in E'...' syntax.
This has been wrong since the pair processing was added (in 9.0),
so back-patch to all supported branches.
Discussion: https://postgr.es/m/19113.1482337898@sss.pgh.pa.us
