clauses in which one side or the other references both sides of the join
cannot be removed as redundant, because that expression won't have been
constrained below the join. Per report from Sergey Burladyan.
checking whether an IS NULL/IS NOT NULL clause is implied or refuted by
a strict function. Per example from Dawid Kuroczko.
Backpatch to 8.2 since this is arguably a performance bug.
log_min_error_statement is active and there is some problem in logging the
current query string; for example, that it's too long to include in the log
message without running out of memory. This problem has existed since the
log_min_error_statement feature was introduced. No doubt the reason it
wasn't detected long ago is that 8.2 is the first release that defaults
log_min_error_statement to less than PANIC level.
Per report from Bill Moran.
truncated relation was deleted later in the WAL sequence. Since replay
normally auto-creates a relation upon its first reference by a WAL log entry,
failure is seen only if the truncate entry happens to be the first reference
after the checkpoint we're restarting from; which is a pretty unusual case but
of course not impossible. Fix by making truncate entries auto-create like
the other ones do. Per report and test case from Dharmendra Goyal.
when handed an invalidly-encoded pattern. The previous coding could get
into an infinite loop if pg_mb2wchar_with_len() returned a zero-length
string after we'd tested for nonempty pattern; which is exactly what it
will do if the string consists only of an incomplete multibyte character.
This led to either an out-of-memory error or a backend crash depending
on platform. Per report from Wiktor Wodecki.
a MIN or MAX aggregate call into an indexscan: the initplan is being made at
the current query nesting level and so we shouldn't increment query_level.
Though usually harmless, this mistake could lead to bogus "plan should not
reference subplan's variable" failures on complex queries. Per bug report
from David Sanchez i Gregori.
referencing table does not change the tuple's FK column(s), we don't bother
to check the PK table since the constraint was presumably already valid.
However, the check is still necessary if the tuple was inserted by our own
transaction, since in that case the INSERT trigger will conclude it need not
make the check (since its version of the tuple has been deleted). We got this
right for simple cases, but not when the insert and update are in different
subtransactions of the current top-level transaction; in such cases the FK
check would never be made at all. (Hence, problem dates back to 8.0 when
subtransactions were added --- it's actually the subtransaction version of a
bug fixed in 7.3.5.) Fix, and add regression test cases. Report and fix by
Affan Salman.
been broken since forever, but was not noticed because people seldom look
at raw parse trees. AFAIK, no impact on users except that debug_print_parse
might fail; but patch it all the way back anyway. Per report from Jeff Ross.
we don't know at that point which relation OID to tell pgstat to forget.
The code was passing the relfilenode, which is incorrect, and could possibly
cause some other relation's stats to be zeroed out. While we could try to
clean this up, it seems much simpler and more reliable to let the next
invocation of pgstat_vacuum_tabstat() fix things; which indeed is how it
worked before I introduced the buggy code into 8.1.3 and later :-(.
Problem noticed by Itagaki Takahiro, fix is per subsequent discussion.
This is a Linux kernel bug that apparently exists in every extant kernel
version: sometimes shmctl() will fail with EIDRM when EINVAL is correct.
We were assuming that EIDRM indicates a possible conflict with pre-existing
backends, and refusing to start the postmaster when this happens. Fortunately,
there does not seem to be any case where Linux can legitimately return EIDRM
(it doesn't track shmem segments in a way that would allow that), so we can
get away with just assuming that EIDRM means EINVAL on this platform.
Per reports from Michael Fuhr and Jon Lapham --- it's a bit surprising
we have not seen more reports, actually.
that are fired at end-of-statement (as is the normal case for foreign keys,
for example). In this situation the per-subxact deferred trigger context
is always empty when subtransaction exit is reached; so we could free it,
but were not doing so, leading to an intratransaction leak of 8K or more
per subtransaction. Per off-list example from Viatcheslav Kalinin
subsequent to bug #3418 (his original bug report omitted a foreign key
constraint needed to cause this leak).
Back-patch to 8.2; prior versions were not using per-subxact contexts
for deferred triggers, so did not have this leak.
overruns (neither of which seem likely to be exploitable as security holes,
fortunately, since the provoker can't control the data written). One of
these is due to choosing to stomp on the output of a called function, which
is bad news in any case; make it treat the called functions' results as
read-only. Avoid some unnecessary palloc/pfree traffic too; it's not
really helpful to free small temporary objects, and again this is presuming
more than it ought to about the nature of the results of called functions.
Per report from Patrick Welche and additional code-reading by Imad.
create table foo (bar int default null default 3);
due to not thinking about the special-case handling of DEFAULT NULL.
Problem noticed while investigating bug #3396.
reassembled in the syslogger before writing to the log file. This prevents
partial messages from being written, which mucks up log rotation, and
messages from different backends being interleaved, which causes garbled
logs. Backport as far as 8.0, where the syslogger was introduced.
Tom Lane and Andrew Dunstan
historically worked in some but not all cases, but as of 8.2 it failed for all
timezone formats. Fix, and add regression test cases to catch future
regressions in this area. Per gripe from Adam Witney.
large inputs. Also cause it to error out immediately if the result will
overflow, instead of grinding through a lot of calculation first.
Per gripe from Jim Nasby.
- Fix possible deadlock between UPDATE and VACUUM queries. Bug never was
observed in 8.2, but it still exist there. HEAD is more sensitive to
bug after recent "ring" of buffer improvements.
- Fix WAL creation: if parent page is stored as is after split then
incomplete split isn't removed during replay. This happens rather rare, only
on large tables with a lot of updates/inserts.
- Fix WAL replay: there was wrong test of XLR_BKP_BLOCK_* for left
page after deletion of page. That causes wrong rightlink field: it pointed
to deleted page.
- add checking of match of clearing incomplete split
- cleanup incomplete split list after proceeding
All of this chages doesn't change on-disk storage, so backpatch...
But second point may be an issue for replaying logs from previous version.
to be cases when at least Windows 2000 can do this even though select
just indicated that the socket is readable.
Per report and analysis from Cyril VELTER.
wrong data when dumping a bufferload that crosses a component-file boundary.
This probably has not been seen in the wild because (a) component files are
normally 1GB apiece and (b) non-block-aligned buffer usage is relatively
rare. But it's fairly easy to reproduce a problem if one reduces RELSEG_SIZE
in a test build. Kudos to Kurt Harriman for spotting the bug.
a well-randomized batch number even when given a poorly-randomized hash value.
This is a bit inefficient but seems the only practical solution given the
constraint that we can't change the hash functions in released branches.
Per report from Joseph Shraibman.
Applied to 8.1 and 8.2 only --- HEAD is getting a cleaner fix, and 8.0 and
before use different coding that seems less vulnerable.
fail when used in a deferred trigger. Bug goes back to 8.0; no doubt the
reason it hadn't been noticed is that we've been discouraging use of
user-defined constraint triggers. Per report from Frank van Vugt.
"microsecond" and "millisecond" units were not considered valid input
by themselves, which caused inputs like "1 millisecond" to be rejected
erroneously.
Update the docs, add regression tests, and backport to 8.2 and 8.1
in cases where a sub-SELECT inserts a WHERE clause between two outer joins,
that clause may prevent us from re-ordering the two outer joins. The code
was considering only the joins' own ON-conditions in determining reordering
safety, which is not good enough. Add a "delay_upper_joins" flag to
OuterJoinInfo to flag that we have detected such a clause and higher-level
outer joins shouldn't be permitted to commute with this one. (This might
seem overly coarse, but given the current rules for OJ reordering, it's
sufficient AFAICT.)
The failure case is actually pretty narrow: it needs a WHERE clause within
the RHS of a left join that checks the RHS of a lower left join, but is not
strict for that RHS (else we'd have simplified the lower join to a plain
join). Even then no failure will be manifest unless the planner chooses to
rearrange the join order.
Per bug report from Adam Terrey.
cheapest-startup-cost innerjoin indexscans, and make joinpath.c consider
both of these (when different) as the inside of a nestloop join. The
original design was based on the assumption that indexscan paths always
have negligible startup cost, and so total cost is the only important
figure of merit; an assumption that's obviously broken by bitmap
indexscans. This oversight could lead to choosing poor plans in cases
where fast-start behavior is more important than total cost, such as
LIMIT and IN queries. 8.1-vintage brain fade exposed by an example from
Chuck D.
had been taught not to do that ages ago, the SSL code was helpfully bleating
anyway. Resolves some recent reports such as bug #3266; however the
underlying cause of the related bug #2829 is still unclear.
and inet_server_addr() fail if the client connected over a "scoped" IPv6
address. In this case getnameinfo() will return a string ending with
a poorly-standardized "%something" zone specifier, which these functions
try to feed to network_in(), which won't take it. So that we don't lose
functionality altogether, suppress the zone specifier before giving the
string to network_in(). Per report from Brian Hirt.
TODO: probably someday the inet type should support scoped IPv6 addresses,
and then this patch should be reverted.
Backpatch to 8.2 ... is it worth going further?
more completely. The motivation for having it understand IS NULL at all was
to allow use of "foo IS NULL" as one of the subsets of a partitioning on
"foo", but as reported by Aleksander Kmetec, it wasn't really getting the job
done. Backpatch to 8.2 since this is arguably a performance bug.
needs to check the new constraint against columns of derived domains too.
Also, make it error out if the domain to be modified is used within any
composite-type columns. Eventually we should support that case, but it seems
a bit painful, and not suitable for a back-patch. For the moment just let the
user know we can't do it.
Backpatch to 8.2, which is the only released version that allows nested
domains. Possibly the other part should be back-patched further.
wrong thing when inlining polymorphic SQL functions, because it was using the
function's declared return type where it should have used the actual result
type of the current call. In 8.1 and 8.2 this causes obvious failures even if
you don't have assertions turned on; in 8.0 and 7.4 it would only be a problem
if the inlined expression were used as an input to a function that did
run-time type determination on its inputs. Add a regression test, since this
is evidently an under-tested area.
is in progress on the same hashtable. This seems the least invasive way to
fix the recently-recognized problem that a split could cause the scan to
visit entries twice or (with much lower probability) miss them entirely.
The only field-reported problem caused by this is the "failed to re-find
shared lock object" PANIC in COMMIT PREPARED reported by Michel Dorochevsky,
which was caused by multiply visited entries. However, it seems certain
that mdsync() is vulnerable to missing required fsync's due to missed
entries, and I am fearful that RelationCacheInitializePhase2() might be at
risk as well. Because of that and the generalized hazard presented by this
bug, back-patch all the supported branches.
Along the way, fix pg_prepared_statement() and pg_cursor() to not assume
that the hashtables they are examining will stay static between calls.
This is risky regardless of the newly noted dynahash problem, because
hash_seq_search() has never promised to cope with deletion of table entries
other than the just-returned one. There may be no bug here because the only
supported way to call these functions is via ExecMakeTableFunctionResult()
which will cycle them to completion before doing anything very interesting,
but it seems best to get rid of the assumption. This affects 8.2 and HEAD
only, since those functions weren't there earlier.
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
competing alternatives for indexes to use in a bitmap scan. The former
coding took estimated selectivity as an overriding factor, causing it to
sometimes choose indexes that were much slower to scan than ones with a
slightly worse selectivity. It was also too narrow-minded about which
combinations of indexes to consider ANDing. The rewrite makes it pay more
attention to index scan cost than selectivity; this seems sane since it's
impossible to have very bad selectivity with low cost, whereas the reverse
isn't true. Also, we now consider each index alone, as well as adding
each index to an AND-group led by each prior index, for a total of about
O(N^2) rather than O(N) combinations considered. This makes the results
much less dependent on the exact order in which the indexes are
considered. It's still a lot cheaper than an O(2^N) exhaustive search.
A prefilter step eliminates all but the cheapest of those indexes using
the same set of WHERE conditions, to keep the effective value of N down in
scenarios where the DBA has created lots of partially-redundant indexes.
fast flow of new fsync requests can prevent mdsync() from ever completing.
This was an unforeseen consequence of a patch added in Mar 2006 to prevent
the fsync request queue from overflowing. Problem identified by Heikki
Linnakangas and independently by ITAGAKI Takahiro; fix based on ideas from
Takahiro-san, Heikki, and Tom.
Back-patch as far as 8.1 because a previous back-patch introduced the problem
into 8.1 ...
