postgres_fdw tries to use PG_TRY blocks to ensure that it will
eventually free the PGresult created by the remote modify command.
However, it's fundamentally impossible for this scheme to work
reliably when there's RETURNING data, because the query could fail
in between invocations of postgres_fdw's DirectModify methods.
There is at least one instance of exactly this situation in the
regression tests, and the ensuing session-lifespan leak is visible
under Valgrind.
We can improve matters by using a memory context reset callback
attached to the ExecutorState context. That ensures that the
PGresult will be freed when the ExecutorState context is torn
down, even if control never reaches postgresEndDirectModify.
I have little faith that there aren't other potential PGresult
leakages in the backend modules that use libpq. So I think it'd
be a good idea to apply this concept universally by creating
infrastructure that attaches a reset callback to every PGresult
generated in the backend. However, that seems too invasive for
v18 at this point, let alone the back branches. So for the
moment, apply this narrow fix that just makes DirectModify safe.
I have a patch in the queue for the more general idea, but it
will have to wait for v19.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Backpatch-through: 13
Our GSSAPI code only allows packet sizes up to 16kB. However it
emerges that during authentication, larger packets might be needed;
various authorities suggest 48kB or 64kB as the maximum packet size.
This limitation caused login failure for AD users who belong to many
AD groups. To add insult to injury, we gave an unintelligible error
message, typically "GSSAPI context establishment error: The routine
must be called again to complete its function: Unknown error".
As noted in code comments, the 16kB packet limit is effectively a
protocol constant once we are doing normal data transmission: the
GSSAPI code splits the data stream at those points, and if we change
the limit then we will have cross-version compatibility problems
due to the receiver's buffer being too small in some combinations.
However, during the authentication exchange the packet sizes are
not determined by us, but by the underlying GSSAPI library. So we
might as well just try to send what the library tells us to.
An unpatched recipient will fail on a packet larger than 16kB,
but that's not worse than the sender failing without even trying.
So this doesn't introduce any meaningful compatibility problem.
We still need a buffer size limit, but we can easily make it be
64kB rather than 16kB until transport negotiation is complete.
(Larger values were discussed, but don't seem likely to add
anything.)
Reported-by: Chris Gooch <cgooch@bamfunds.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DS0PR22MB5971A9C8A3F44BCC6293C4DABE99A@DS0PR22MB5971.namprd22.prod.outlook.com
Backpatch-through: 13
Previously, XactLockTableWait() and ConditionalXactLockTableWait() could enter
a non-interruptible loop when they successfully acquired a lock on a transaction
but the transaction still appeared to be running. Since this loop continued
until the transaction completed, it could result in long, uninterruptible waits.
Although this scenario is generally unlikely since XactLockTableWait() and
ConditionalXactLockTableWait() can basically acquire a transaction lock
only when the transaction is not running, it can occur in a hot standby.
In such cases, the transaction may still appear active due to
the KnownAssignedXids list, even while no lock on the transaction exists.
For example, this situation can happen when creating a logical replication
slot on a standby.
The cause of the non-interruptible loop was the absence of CHECK_FOR_INTERRUPTS()
within it. This commit adds CHECK_FOR_INTERRUPTS() to the loop in both functions,
ensuring they can be interrupted safely.
Back-patch to all supported branches.
Author: Kevin K Biju <kevinkbiju@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAM45KeELdjhS-rGuvN=ZLJ_asvZACucZ9LZWVzH7bGcD12DDwg@mail.gmail.com
Backpatch-through: 13
Commits 53af9491a043 and 2d5fe514052a fixed a number of problems with
foreign keys that reference partitioned tables, and a query to detect
already broken FKs was supplied with the release notes for 17.1, 16.5,
15.9, 14.14, 13.17. However, that query has a bug that causes it to
wrongly report self-referential foreign keys even when they are correct,
so if the user was to drop and rebuild the FKs as indicated, the query
would continue to report them as needing to be repaired. Here we fix
the query to not have that problem.
Reported-by: Paul Foerster <paul.foerster@gmail.com>
Discussion: https://postgr.es/m/5456A1D0-CD47-4315-9C65-71B27E7A2906@gmail.com
Backpatch-through: 13-17
If we hit out-of-memory between creating the PGconn and inserting
it into dblink's hashtable, we'd lose track of the PGconn, which
is quite bad since it represents a live connection to a remote DB.
Fix by rearranging things so that we create the hashtable entry
first.
Also reduce the number of states we have to deal with by getting rid
of the separately-allocated remoteConn object, instead allocating it
in-line in the hashtable entries. (That incidentally removes a
session-lifespan memory leak observed in the regression tests.)
There is an apparently-irreducible remaining OOM hazard, which
is that if the connection fails at the libpq level (ie it's
CONNECTION_BAD) then we have to pstrdup the PGconn's error message
before we can release it, and theoretically that could fail. However,
in such cases we're only leaking memory not a live remote connection,
so I'm not convinced that it's worth sweating over.
This is a pretty low-probability failure mode of course, but losing
a live connection seems bad enough to justify back-patching.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/1346940.1748381911@sss.pgh.pa.us
Backpatch-through: 13
pg_stat_statements anticipates that certain constant locations may be
recorded multiple times and attempts to avoid calculating a length for
these locations in fill_in_constant_lengths().
However, during generate_normalized_query() where normalized query
strings are generated, these locations are not excluded from
consideration. This could increment the parameter number counter for
every recorded occurrence at such a location, leading to an incorrect
normalization in certain cases with gaps in the numbers reported.
For example, take this query:
SELECT WHERE '1' IN ('2'::int, '3'::int::text)
Before this commit, it would be normalized like that, with gaps in the
parameter numbers:
SELECT WHERE $1 IN ($3::int, $4::int::text)
However the correct, less confusing one should be like that:
SELECT WHERE $1 IN ($2::int, $3::int::text)
This commit fixes the computation of the parameter numbers to track the
number of constants replaced with an $n by a separate counter instead of
the iterator used to loop through the list of locations.
The underlying query IDs are not changed, neither are the normalized
strings for existing PGSS hash entries. New entries with fresh
normalized queries would automatically get reshaped based on the new
parameter numbering.
Issue discovered while discussing a separate problem for HEAD, but this
affects all the stable branches.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tzxvWXsacGyxrixdhy3tTTDfJQqxyFBRFh31nNHBQ5qA@mail.gmail.com
Backpatch-through: 13
As written, the test was throwing an error because of an unbalanced
parenthesis. The regex used in the test is adjusted to not fail and to
test the case of an opening parenthesis in a character class after some
nested square brackets.
Oversight in d46911e584d4.
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
The code that translates SIMILAR TO pattern matching expressions to
POSIX-style regular expressions did not consider that square brackets
can be nested. For example, in an expression like [[:alpha:]%_], the
logic replaced the placeholders '_' and '%' but it should not.
This commit fixes the conversion logic by tracking the nesting level of
square brackets marking character class areas, while considering that
in expressions like []] or [^]] the first closing square bracket is a
regular character. Multiple tests are added to show how the conversions
should or should not apply applied while in a character class area, with
specific cases added for all the characters converted outside character
classes like an opening parenthesis '(', dollar sign '$', etc.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
Backpatch-through: 13
The test did not wait for all the subscriptions to have caught up when
dropping the subscription "tab_copy". In a slow environment, it could
be possible for the replay of the COMMIT PREPARED transaction "mygid"
to not be confirmed yet, causing one prepared transaction to be left
around before moving to the next steps of the test.
One failure noticed is a transaction found in pg_prepared_xacts for the
cases where copy_data = false and two_phase = true, but there should be
none after dropping the subscription.
As an extra safety measure, a check is added before dropping the
subscription, scanning pg_prepared_xacts to make sure that no prepared
transactions are left once both subscriptions have caught up.
Issue introduced by a8fd13cab0ba, fixing a problem similar to
eaf5321c3524.
Per buildfarm member kestrel.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm329QaZ+bwU--bW6GjbNSZ8-38cDE8QWofafub7NV67oA@mail.gmail.com
Backpatch-through: 15
The documentation for exported snapshots in logical decoding previously
stated that snapshot creation may fail on a hot standby. This is no longer
accurate, as snapshot exporting on standbys has been supported since
PostgreSQL 10. This commit removes the outdated description.
Additionally, the docs referred to the NOEXPORT_SNAPSHOT option to
suppress snapshot exporting in CREATE_REPLICATION_SLOT. However,
since PostgreSQL 15, NOEXPORT_SNAPSHOT is considered legacy syntax
and retained only for backward compatibility. This commit updates
the documentation for v15 and later to use the modern equivalent:
SNAPSHOT 'nothing'. The older syntax is preserved in documentation for
v14 and earlier.
Back-patched to all supported branches.
Reported-by: Kevin K Biju <kevinkbiju@gmail.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Kevin K Biju <kevinkbiju@gmail.com>
Discussion: https://postgr.es/m/174791480466.798.17122832105389395178@wrigleys.postgresql.org
Backpatch-through: 13
PgStat_StatTabEntry and AutoVacOpts structs were leaked until
the end of the autovacuum worker's run, which is bad news if
there are a lot of relations in the database.
Note: pfree'ing the PgStat_StatTabEntry structs here seems a bit
risky, because pgstat_fetch_stat_tabentry_ext does not guarantee
anything about whether its result is long-lived. It appears okay
so long as autovacuum forces PGSTAT_FETCH_CONSISTENCY_NONE, but
I think that API could use a re-think.
Also ensure that the VacuumRelation structure passed to
vacuum() is in recoverable storage.
Back-patch to v15 where we started to manage table statistics
this way. (The AutoVacOpts leakage is probably older, but
I'm not excited enough to worry about just that part.)
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/285483.1746756246@sss.pgh.pa.us
Backpatch-through: 15
xmltotext_with_options sometimes tries to replace the existing
root node of a libxml2 document. In that case xmlDocSetRootElement
will unlink and return the old root node; if we fail to free it,
it's leaked for the remainder of the session. The amount of memory
at stake is not large, a couple hundred bytes per occurrence, but
that could still become annoying in heavy usage.
Our only other xmlDocSetRootElement call is not at risk because
it's working on a just-created document, but let's modify that
code too to make it clear that it's dependent on that.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/1358967.1747858817@sss.pgh.pa.us
Backpatch-through: 16
Since commit 8b1dccd37c7, the PREPARE TRANSACTION WAL record includes
information about dropped statistics entries. However, the WAL resource
manager description function for PREPARE TRANSACTION record failed to
parse this information correctly and always assumed there were
no such entries.
As a result, for example, pg_waldump could not display the dropped
statistics entries stored in PREPARE TRANSACTION records.
The root cause was that ParsePrepareRecord() did not set the number of
statistics entries to drop on commit or abort. These values remained
zero-initialized and were never updated from the parsed record.
This commit fixes the issue by properly setting those values during parsing.
With this fix, pg_waldump can now correctly report dropped statistics
entries in PREPARE TRANSACTION records.
Back-patch to v15, where commit 8b1dccd37c7 was introduced.
Author: Daniil Davydov <3danissimo@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAJDiXgh-6Epb2XiJe4uL0zF-cf0_s_7Lw1TfEHDMLzYjEmfGOw@mail.gmail.com
Backpatch-through: 15
Invalid indexes are suffixed with "_ccnew" or "_ccold". The
documentation missed to mention the initial underscore.
ChooseRelationName() may also append an extra number if indexes with a
similar name already exist; let's add a note about that too.
Author: Alec Cozens <acozens@pixelpower.com>
Discussion: https://postgr.es/m/174733277404.1455388.11471370288789479593@wrigleys.postgresql.org
Backpatch-through: 13
In the grammar, <expr> is a c_expr, which accepts only a limited set
of integer literals and simple expressions without parens. The
deparsing logic didn't quite match the grammar rule, and failed to use
parens e.g. for "5::bigint".
To fix, always surround the expression with parens. Would be nice to
omit the parens in simple cases, but unfortunately it's non-trivial to
detect such simple cases. Even if the expression is a simple literal
123 in the original query, after parse analysis it becomes a FuncExpr
with COERCE_IMPLICIT_CAST rather than a simple Const.
Reported-by: yonghao lee
Backpatch-through: 13
Discussion: https://www.postgresql.org/message-id/18929-077d6b7093b176e2@postgresql.org
Prevent moving the confirmed_flush backwards, as this could lead to data
duplication issues caused by replicating already replicated changes.
This can happen when a client acknowledges an LSN it doesn't have to do
anything for, and thus didn't store persistently. After a restart, the
client can send the prior LSN that it stored persistently as an
acknowledgement, but we need to ignore such an LSN to avoid retreating
confirm_flush LSN.
Diagnosed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Author: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Tested-by: Nisha Moond <nisha.moond412@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJpy0uDZ29P=BYB1JDWMCh-6wXaNqMwG1u1mB4=10Ly0x7HhwQ@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57164AB5716AF2E477D53F6F9489A@OS0PR01MB5716.jpnprd01.prod.outlook.com
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
This aligns the copyright and legal notice wordig with commit
a233a603bab8 and pgweb commit 2d764dbc083ab8. Backpatch down
to all supported versions.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Dave Page <dpage@pgadmin.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/744E414E-3F52-404C-97FB-ED9B3AA37DC8@yesql.se
Backpatch-through: 13
In an XMLTABLE expression, columns can be marked NOT NULL, and the
parser internally fabricates an option named "is_not_null" to
represent this. However, the parser also allows users to specify
arbitrary option names. This creates a conflict: a user can
explicitly use "is_not_null" as an option name and assign it a
non-Boolean value, which violates internal assumptions and triggers an
assertion failure.
To fix, this patch checks whether a user-supplied name collides with
the internally reserved option name and raises an error if so.
Additionally, the internal name is renamed to "__pg__is_not_null" to
further reduce the risk of collision with user-defined names.
Reported-by: Евгений Горбанев <gorbanyoves@basealt.ru>
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/6bac9886-65bf-4cec-96bd-e304159f28db@basealt.ru
Backpatch-through: 15
The documentation for log_check() had the parameters in the wrong
order. Also while there, rename %parameters to %params to better
documentation for similar functions which use %params. Backpatch
down to v14 where this was introduced.
Author: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/9F503B5-32F2-45D7-A0AE-952879AD65F1@yesql.se
Backpatch-through: 14
Right now there's only one caller, so that this is merely
an exercise in shoving code from one module to another,
but there will shortly be another one. It seems better to
avoid having two copies of this highly-subject-to-change test.
Back-patch to v15, where we first introduced some tests that
don't work with LibreSSL.
Reported-by: Thomas Munro <thomas.munro@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA+hUKG+fLqyweHqFSBcErueUVT0vDuSNWui-ySz3+d_APmq7dw@mail.gmail.com
Backpatch-through: 15
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <noah@leadboat.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
Start the file with static functions not specific to pe_test_vectors
tests. This way, new tests can use them without disrupting the file's
layout. Change report_result() PQExpBuffer arguments to plain strings.
Back-patch to v13 (all supported versions), for the next commit.
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
Also adjust the phrasing in the comments.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAPmGK17%3DPHSDZ%2B0G6jcj12buyyE1bQQc3sbp1Wxri7tODT-SDw%40mail.gmail.com
Backpatch-through: 15
For self-referencing foreign keys in partitioned tables, we weren't
handling creation of pg_constraint rows during CREATE TABLE PARTITION AS
as well as ALTER TABLE ATTACH PARTITION. This is an old bug -- mostly,
we broke this in 614a406b4ff1 while trying to fix it (so 12.13, 13.9,
14.6 and 15.0 and up all behave incorrectly). This commit reverts part
of that with additional fixes for full correctness, and installs more
tests to verify the parts we broke, not just the catalog contents but
also the user-visible behavior.
Backpatch to all live branches. In branches 13 and 14, commit
46a8c27a7226 changed the behavior during DETACH to drop a FK
constraint rather than trying to repair it, because the complete fix of
repairing catalog constraints was problematic due to lack of previous
fixes. For this reason, the test behavior in those branches is a bit
different. However, as best as I can tell, the fix works correctly
there.
In release notes we have to recommend that all self-referencing foreign
keys on partitioned tables be recreated if partitions have been created
or attached after the FK was created, keeping in mind that violating
rows might already be present on the referencing side.
Reported-by: Guillaume Lelarge <guillaume@lelarge.info>
Reported-by: Matthew Gabeler-Lee <fastcat@gmail.com>
Reported-by: Luca Vallisa <luca.vallisa@gmail.com>
Discussion: https://postgr.es/m/CAECtzeWHCA+6tTcm2Oh2+g7fURUJpLZb-=pRXgeWJ-Pi+VU=_w@mail.gmail.com
Discussion: https://postgr.es/m/18156-a44bc7096f0683e6@postgresql.org
Discussion: https://postgr.es/m/CAAT=myvsiF-Attja5DcWoUWh21R12R-sfXECY2-3ynt8kaOqjw@mail.gmail.com
SQL "SET search_path = 'pg_catalog, pg_temp'" is silently equivalent to
"SET search_path = pg_temp, pg_catalog, "pg_catalog, pg_temp"" instead
of the intended "SET search_path = pg_catalog, pg_temp". (The intent
was a two-element search path. With the single quotes, it instead
specifies one element with a comma and a space in the middle of the
element.) In addition to the SET statement, this affects SET clauses of
CREATE FUNCTION, ALTER ROLE, and ALTER DATABASE. It does not affect the
set_config() SQL function.
Though the documentation did not show an insecure command, remove single
quotes that could entice a reader to write an insecure command.
Back-patch to v13 (all supported versions).
Reported-by: Sven Klemm <sven@timescale.com>
Author: Sven Klemm <sven@timescale.com>
Backpatch-through: 13
Add a documentation warning to ts_headline() pointing out that, when
working with untrusted input documents, the output is not guaranteed
to be safe for direct inclusion in web pages. This is because, while
it does remove some XML tags from the input, it doesn't remove all
HTML markup, and so the result may be unsafe (e.g., it might permit
XSS attacks).
To guard against that, all HTML markup should be removed from the
input, making it plain text, or the output should be passed through an
HTML sanitizer.
In addition, document precisely what the default text search parser
recognises as valid XML tags, since that's what determines which XML
tags ts_headline() will remove.
Reported-by: Richard Neill <richard.neill@telos.digital>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Backpatch-through: 13
DST law changes in Chile: there is a new time zone America/Coyhaique
for Chile's Aysén Region, to account for it changing to UTC-03
year-round and thus diverging from America/Santiago.
Historical corrections for Iran.
Backpatch-through: 13
During logical decoding, we advance catalog_xmin of logical too early in
fast_forward mode, resulting in required catalog data being removed by
vacuum. This mode is normally used to advance the slot without processing
the changes, but we still can't let the slot's xmin to advance to an
incorrect value.
Commit f49a80c481 fixed a similar issue where the logical slot's
catalog_xmin was getting advanced prematurely during non-fast-forward
mode. During xl_running_xacts processing, instead of directly advancing
the slot's xmin to the oldest running xid in the record, it allowed the
xmin to be held back for snapshots that can be used for
not-yet-replayed transactions, as those might consider older txns as
running too. However, it missed the fact that the same problem can happen
during fast_forward mode decoding, as we won't build a base snapshot in
that mode, and the future call to get_changes from the same slot can miss
seeing the required catalog changes leading to incorrect reslts.
This commit allows building the base snapshot even in fast_forward mode to
prevent the early advancement of xmin.
Reported-by: Amit Kapila <amit.kapila16@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAA4eK1LqWncUOqKijiafe+Ypt1gQAQRjctKLMY953J79xDBgAg@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57163087F86621D44D9A72BF94BB2@OS0PR01MB5716.jpnprd01.prod.outlook.com
One place in hash_create() used DynaHashAlloc() as a convenient
shorthand for MemoryContextAlloc(). That was fine when it was
written, but it stopped being fine when 9c911ec06 changed
DynaHashAlloc() to use MCXT_ALLOC_NO_OOM (mea culpa). Change
the code to call plain MemoryContextAlloc() as intended.
I think that this bug may be unreachable in practice, since we now
always create AllocSets with some space already allocated, so that
an OOM failure here for a non-shared hash table should be impossible
(with a hash table name of reasonable length anyway). And there
aren't enough shared hash tables to make a crash for one of those
probable. Nonetheless it's clearly not operating as designed, so
back-patch to v16 where 9c911ec06 came in.
Reported-by: Maksim Korotkov <m.korotkov@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/219bdccd460510efaccf90b57e5e5ef2@postgrespro.ru
Backpatch-through: 16
Commit 3f28b2fcac tried to ensure that the replication origin shouldn't be
advanced in case of an ERROR in the apply worker, so that it can request
the same data again after restart. However, it is possible that an ERROR
was caught and handled by a (say PL/pgSQL) function, and the apply worker
continues to apply further changes, in which case, we shouldn't reset the
replication origin.
Ensure to reset the origin only when the apply worker exits after an
ERROR.
Commit 3f28b2fcac added new function geterrlevel, which we removed in HEAD
as part of this commit, but kept it in backbranches to avoid breaking any
applications. A separate case can be made to have such a function even for
HEAD.
Reported-by: Shawn McCoy <shawn.the.mccoy@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 16, where it was introduced
Discussion: https://postgr.es/m/CALsgZNCGARa2mcYNVTSj9uoPcJo-tPuWUGECReKpNgTpo31_Pw@mail.gmail.com
This assertion, based on pending_since (timestamp used to prevent stats
reports to be too frequent or should a partial flush happen), is reached
when it is found that no data can be flushed but a previous call of
pgstat_report_stat() determined that some stats data has been found as
in need of a flush. So pending_since is set when some stats data is
pending (in non-force mode) or if report attempts are too frequent, and
reset to 0 once all stats have been flushed.
Since 5cbbe70a9cc6, WAL senders have begun to report their stats on a
periodic basis for IO stats in v16~ and backend stats on HEAD, creating
some friction with the concurrent pgstat_report_stat() calls that can
happen in the context of a WAL sender (shutdown callback doing a final
report or backend-related code paths). This problem is the cause of
spurious failures in the TAP tests.
In theory, this assertion can be also reached in v15, even if that's
very unlikely. For example, a process, say a background worker, could
do periodic and direct stats flushes with concurrent calls of
pgstat_report_stat() that could cause conflicting values of
pending_since. This can be done with WAL or SLRU stats flushes using
pgstat_flush_wal() or pgstat_slru_flush(). HEAD makes this situation
easier to happen with custom cumulative stats.
This commit removes the assertion altogether, per discussion, as it is
more useful to keep the state of things as they are for the WAL sender.
The assertion could use a special state based on for example
am_walsender, but I doubt that this would be meaningful in the long run
based on the other arguments raised while discussing this issue.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1489124.1744685908@sss.pgh.pa.us
Discussion: https://postgr.es/m/dwrkeszz6czvtkxzr5mqlciy652zau5qqnm3cp5f3p2po74ppk@omg4g3cc6dgq
Backpatch-through: 15
v14 commit 1f95181b44c843729caaa688f74babe9403b5850 and its v13
equivalent caused timing-dependent failures in archive recovery, at
restartpoints. The symptom was "invalid magic number 0000 in log
segment X, offset 0", "unexpected pageaddr X in log segment Y, offset 0"
[X < Y], or an assertion failure. Commit
3635a0a35aafd3bfa80b7a809bc6e91ccd36606a and predecessors back-patched
v15 changes to fix that. This test reproduces the problem
probabilistically, typically in less than 1000 iterations of the test.
Hence, buildfarm and CI runs would have surfaced enough failures to get
attention within a day.
Reported-by: Arun Thirupathi <arunth@google.com>
Discussion: https://postgr.es/m/20250306193013.36.nmisch@google.com
Backpatch-through: 13
Commit 7102070329d8147246d2791321f9915c3b5abf31 fixed a similar bug, but
it missed the case of database-wide ANALYZE ("use_own_xacts" mode).
Commit a07e03fd8fa7daf4d1356f7cb501ffe784ea6257 changed consequences
from silent discard of a pg_class stats (relpages et al.) update to
ERROR "tuple to be updated was already modified". Losing a relpages
update of an ON COMMIT DELETE ROWS table was negligible, but a
COMMIT-time error isn't negligible. Back-patch to v13 (all supported
versions).
Reported-by: Richard Guo <guofenglinux@gmail.com
Reported-by: Robins Tharakan <tharakan@gmail.com>
Discussion: https://postgr.es/m/CAMbWs4-XwMKMKJ_GT=p3_-_=j9rQSEs1FbDFUnW9zHuKPsPNEQ@mail.gmail.com
Backpatch-through: 13
1349d2790 added support so that aggregate functions with an ORDER BY or
DISTINCT clause could make use of presorted inputs to avoid an implicit
sort within nodeAgg.c. That commit failed to consider that a FILTER
clause may exist that filters rows before the aggregate function
arguments are evaluated. That can be problematic if an aggregate
argument contains an expression which could error out during evaluation.
It's perfectly valid to want to have a FILTER clause which eliminates
such values, and with the pre-sorted path added in 1349d2790, it was
possible that the planner would produce a plan with a Sort node above
the Aggregate to perform the sort on the aggregate's arguments long before
the Aggregate node would filter out the non-matching values.
Here we fix this by inspecting ORDER BY / DISTINCT aggregate functions
which have a FILTER clause to see if the aggregate's arguments are
anything more complex than a Var or a Const. Evaluating these isn't
going to cause an error. If we find any non-Var, non-Const parameters
then the planner will now opt to perform the sort in the Aggregate node
for these aggregates, i.e. disable the presorted aggregate optimization.
An alternative fix would have been to completely disallow the presorted
optimization for Aggrefs with any FILTER clause, but that wasn't done as
that could cause large performance regressions for queries that see
significant gains from 1349d2790 due to presorted results coming in from
an Index Scan.
Backpatch to 16, where 1349d2790 was introduced
Author: David Rowley <dgrowleyml@gmail.com>
Reported-by: Kaimeh <kkaimeh@gmail.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAK-%2BJz9J%3DQ06-M7cDJoPNeYbz5EZDqkjQbJnmRyQyzkbRGsYkA%40mail.gmail.com
Backpatch-through: 16
The original intent in heap_page_items() was to return nulls, not
throw an error or crash, if an item was sufficiently corrupt that
we couldn't safely extract data from it. However, commit d6061f83a
utterly missed that memo, and not only put in an un-length-checked
copy of the tuple's data section, but also managed to break the check
on sane nulls-bitmap length. Either mistake could possibly lead to
a SIGSEGV crash if the tuple is corrupt.
Bug: #18896
Reported-by: Dmitry Kovalenko <d.kovalenko@postgrespro.ru>
Author: Dmitry Kovalenko <d.kovalenko@postgrespro.ru>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18896-add267b8e06663e3@postgresql.org
Backpatch-through: 13
We'd try to drop the partitions of a partitioned index separately,
which is disallowed by the backend, leading to an error during
restore. While the error is harmless, it causes problems if you
try to use --single-transaction mode.
Fortunately, there seems no need to do a DROP at all, since the
partition will go away silently when we drop either the parent index
or the partition's table. So just make the DROP conditional on not
being a partition.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxF0QSdkjFKF4di-JGWN6CSdQYEAhGPmQJJCdkSZtd=oLg@mail.gmail.com
Backpatch-through: 13
If a GENERATED column is declared to have a domain data type where
the domain's constraints disallow null values, INSERT commands failed
because we built a targetlist that included coercing a null constant
to the domain's type. The failure occurred even when the generated
value would have been perfectly OK. This is adjacent to the issues
fixed in 0da39aa76, but we didn't notice for lack of testing a domain
with such a constraint.
We aren't going to use the result of the targetlist entry for the
generated column --- ExecComputeStoredGenerated will overwrite it.
So it's not really necessary that it have the exact datatype of
the generated column. This patch fixes the problem by changing
the targetlist entry to be a null Const of the domain's base type,
which should be sufficiently legal. (We do have to tweak
ExecCheckPlanOutput to accept the situation, though.)
This has been broken since we implemented generated columns.
However, this patch only applies easily as far back as v14, partly
because I (tgl) only carried 0da39aa76 back that far, but mostly
because v14 significantly refactored the handling of INSERT/UPDATE
targetlists. Given the lack of field complaints and the short
remaining support lifetime of v13, I judge the cost-benefit ratio
not good for devising a version that would work in v13.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxG59tip2+9h=rEv-ykOFjt0cbsPVchhi0RTij8bABBA0Q@mail.gmail.com
Backpatch-through: 14
Commit 0f21db36d made an assumption that GIN triConsistentFns
would not modify their input entryRes[] arrays. But in fact,
the "shim" triConsistentFn that we use for opclasses that don't
supply their own did exactly that, potentially leading to wrong
answers from a GIN index search. Through bad luck, none of the
test cases that we have for such opclasses exposed the bug.
One response to this could be that the assumption of consistency check
functions not modifying entryRes[] arrays is a bad one, but it still
seems reasonable to me. Notably, shimTriConsistentFn is itself
assuming that with respect to the underlying boolean consistentFn,
so it's sure being self-centered in supposing that it gets to do so.
Fortunately, it's quite simple to fix shimTriConsistentFn to restore
the entry-time state of entryRes[], so let's do that instead.
This issue doesn't affect any core GIN opclasses, since they all
supply their own triConsistentFns. It does affect contrib modules
btree_gin, hstore, and intarray.
Along the way, I (tgl) noticed that shimTriConsistentFn failed to
pick up on a "recheck" flag returned by its first call to the boolean
consistentFn. This may be only a latent problem, since it would be
unlikely for a consistentFn to set recheck for the all-false case
and not any other cases. (Indeed, none of our contrib modules do
that.) Nonetheless, it's formally wrong.
Reported-by: Vinod Sridharan <vsridh90@gmail.com>
Author: Vinod Sridharan <vsridh90@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAFMdLD7XzsXfi1+DpTqTgrD8XU0i2C99KuF=5VHLWjx4C1pkcg@mail.gmail.com
Backpatch-through: 13
