same data type and same typmod, we show that typmod as the output
typmod, rather than generic -1. This responds to several complaints
over the past few years about UNIONs unexpectedly dropping length or
precision info.
support both FOR UPDATE and FOR SHARE in one command, as well as both
NOWAIT and normal WAIT behavior. The more general code is actually
simpler and cleaner.
thereby sharing code with the inheritance case. This puts the UNION-ALL-view
approach to partitioned tables on par with inheritance, so far as constraint
exclusion is concerned: it works either way. (Still need to update the docs
to say so.) The definition of "simple UNION ALL" is a little simpler than
I would like --- basically the union arms can only be SELECT * FROM foo
--- but it's good enough for partitioned-table cases.
inheritance trees on-the-fly, which pretty well constrained us to considering
only one way of planning inheritance, expand inheritance sets during the
planner prep phase, and build a side data structure that can be consulted
later to find which RTEs are members of which inheritance sets. As proof of
concept, use the data structure to plan joins against inheritance sets more
efficiently: we can now use indexes on the set members in inner-indexscan
joins. (The generated plans could be improved further, but it'll take some
executor changes.) This data structure will also support handling UNION ALL
subqueries in the same way as inheritance sets, but that aspect of it isn't
finished yet.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
if the limit were directly applied to it. This does not actually
add a LIMIT plan node to the generated subqueries --- that would be
useless overhead --- but it does cause the planner to prefer fast-
start plans when the limit is small. After an idea from Phil Endecott.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
aren't doing anything useful (ie, neither selection nor projection).
Also, extend to SubqueryScan the hacks already in place to avoid
unnecessary ExecProject calls when the result would just be the same
tuple the subquery already delivered. This saves some overhead in
UNION and other set operations, as well as avoiding overhead for
unflatten-able subqueries. Per example from Sokolov Yura.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
of an inheritance child table is binary-compatible with the rowtype of
its parent, invent an expression node type that does the conversion
correctly. Fixes the new bug exhibited by Kris Shannon as well as a
lot of old bugs that would only show up when using multiple inheritance
or after altering the parent table.
from Sebastian Böck. The fix involves being more consistent about
when rangetable entries are copied or modified. Someday we really
need to fix this stuff to not scribble on its input data structures
in the first place...
1. Solve the problem of not having TOAST references hiding inside composite
values by establishing the rule that toasting only goes one level deep:
a tuple can contain toasted fields, but a composite-type datum that is
to be inserted into a tuple cannot. Enforcing this in heap_formtuple
is relatively cheap and it avoids a large increase in the cost of running
the tuptoaster during final storage of a row.
2. Fix some interesting problems in expansion of inherited queries that
reference whole-row variables. We never really did this correctly before,
but it's now relatively painless to solve by expanding the parent's
whole-row Var into a RowExpr() selecting the proper columns from the
child.
If you dike out the preventive check in CheckAttributeType(),
composite-type columns now seem to actually work. However, we surely
cannot ship them like this --- without I/O for composite types, you
can't get pg_dump to dump tables containing them. So a little more
work still to do.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
by the set operation, so that redundant sorts at higher levels can be
avoided. This was foreseen a good while back, but not done. Per request
from Karel Zak.
check instead of hardwiring assumptions that only certain plan node types
can appear at the places where we are testing. This was always a pretty
fragile assumption, and it turns out to be broken in 7.4 for certain cases
involving IN-subselect tests that need type coercion.
Also, modify code that builds finished Plan tree so that node types that
don't do projection always copy their input node's targetlist, rather than
having the tlist passed in from the caller. The old method makes it too
easy to write broken code that thinks it can modify the tlist when it
cannot.
teaching the latter to accept either RestrictInfo nodes or bare
clause expressions; and cache the selectivity result in the RestrictInfo
node when possible. This extends the caching behavior of approx_selectivity
to many more contexts, and should reduce duplicate selectivity
calculations.
first time generate an OR indexscan for a two-column index when the WHERE
condition is like 'col1 = foo AND (col2 = bar OR col2 = baz)' --- before,
the OR had to be on the first column of the index or we'd not notice the
possibility of using it. Some progress towards extracting OR indexscans
from subclauses of an OR that references multiple relations, too, although
this code is #ifdef'd out because it needs more work.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
query node, since that won't work unless the planner is upgraded.
Someday we should try to support at least some cases of this, but for
now just plug the hole in the dike. Per discussion with Dmitry Tkach.
node emits only those vars that are actually needed above it in the
plan tree. (There were comments in the code suggesting that this was
done at some point in the dim past, but for a long time we have just
made join nodes emit everything that either input emitted.) Aside from
being marginally more efficient, this fixes the problem noted by Peter
Eisentraut where a join above an IN-implemented-as-join might fail,
because the subplan targetlist constructed in the latter case didn't
meet the expectation of including everything.
Along the way, fix some places that were O(N^2) in the targetlist
length. This is not all the trouble spots for wide queries by any
means, but it's a step forward.
silently resolving them to type TEXT. This is comparable to what we
do when faced with UNKNOWN in CASE, UNION, and other contexts. It gets
rid of this and related annoyances:
select distinct f1, '' from int4_tbl;
ERROR: Unable to identify an ordering operator '<' for type unknown
This was discussed many moons ago, but no one got round to fixing it.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
that the types of untyped string-literal constants are deduced (ie,
when coerce_type is applied to 'em, that's what the type must be).
Remove the ancient hack of storing the input Param-types array as a
global variable, and put the info into ParseState instead. This touches
a lot of files because of adjustment of routine parameter lists, but
it's really not a large patch. Note: PREPARE statement still insists on
exact specification of parameter types, but that could easily be relaxed
now, if we wanted to do so.
into a UNION that has some type coercions applied to the component
queries, so long as the qual itself does not reference any columns that
have such coercions. Per example from Jonathan Bartlett 24-Apr-03.
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
There are two implementation techniques: the executor understands a new
JOIN_IN jointype, which emits at most one matching row per left-hand row,
or the result of the IN's sub-select can be fed through a DISTINCT filter
and then joined as an ordinary relation.
Along the way, some minor code cleanup in the optimizer; notably, break
out most of the jointree-rearrangement preprocessing in planner.c and
put it in a new file prep/prepjointree.c.
simplify callers. It turns out the common case is that the caller
does want to recurse into sub-queries, so push support for that into
these subroutines.
containing a volatile function), rather than only on 'Var = Var' clauses
as before. This makes it practical to do flatten_join_alias_vars at the
start of planning, which in turn eliminates a bunch of klugery inside the
planner to deal with alias vars. As a free side effect, we now detect
implied equality of non-Var expressions; for example in
SELECT ... WHERE a.x = b.y and b.y = 42
we will deduce a.x = 42 and use that as a restriction qual on a. Also,
we can remove the restriction introduced 12/5/02 to prevent pullup of
subqueries whose targetlists contain sublinks.
Still TODO: make statistical estimation routines in selfuncs.c and costsize.c
smarter about expressions that are more complex than plain Vars. The need
for this is considerably greater now that we have to be able to estimate
the suitability of merge and hash join techniques on such expressions.
costs for expression evaluation, not only per-tuple cost as before.
This extension is needed in order to deal realistically with hashed or
materialized sub-selects.
match parent table. This used to work, but was broken in 7.3 by
rearrangement of code that handles targetlist sorting. Add a regression
test to catch future breakage.
