These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.
5a031a5556ff83b8a9646892715d7fef415b83c3 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.
f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.
Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.
Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Previously, this was hardcoded: we always had 8. Performance testing
shows that isn't enough, especially on big SMP systems, so we allow it
to scale up as high as 32 when there's adequate memory. On the flip
side, when shared_buffers is very small, drop the number of CLOG buffers
down to as little as 4, so that we can start the postmaster even
when very little shared memory is available.
Per extensive discussion with Simon Riggs, Tom Lane, and others on
pgsql-hackers.
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
be used instead of the normal exclusive lock, and make WAL redo functions
responsible for calling RestoreBkpBlocks(). They know better what kind of a
lock they need.
At the moment, this just moves things around with no functional change, but
makes the hot standby patch that's under review cleaner.
from COMMITTED to SUBCOMMITTED during recovery. This wasn't previously
possible, but it is now due to the recent changes on clog commit protocol for
subtransactions.
Simon Riggs
This patch eliminates the marking of subtransactions as SUBCOMMITTED in pg_clog
during their commit; instead they remain in-progress until main transaction
commit. At main transaction commit, the commit protocol is atomic-by-page
instead of one transaction at a time. To avoid a race condition with some
subtransactions appearing committed before others in the case where they span
more than one pg_clog page, we conserve the logic that marks them subcommitted
before marking the parent committed.
Simon Riggs with minor help from me
rows will normally never obtain an XID at all. We already did things this way
for subtransactions, but this patch extends the concept to top-level
transactions. In applications where there are lots of short read-only
transactions, this should improve performance noticeably; not so much from
removal of the actual XID-assignments, as from reduction of overhead that's
driven by the rate of XID consumption. We add a concept of a "virtual
transaction ID" so that active transactions can be uniquely identified even
if they don't have a regular XID. This is a much lighter-weight concept:
uniqueness of VXIDs is only guaranteed over the short term, and no on-disk
record is made about them.
Florian Pflug, with some editorialization by Tom.
before reporting a transaction committed. Data consistency is still
guaranteed (unlike setting fsync = off), but a crash may lose the effects
of the last few transactions. Patch by Simon, some editorialization by Tom.
in PITR scenarios. We now WAL-log the replacement of old XIDs with
FrozenTransactionId, so that such replacement is guaranteed to propagate to
PITR slave databases. Also, rather than relying on hint-bit updates to be
preserved, pg_clog is not truncated until all instances of an XID are known to
have been replaced by FrozenTransactionId. Add new GUC variables and
pg_autovacuum columns to allow management of the freezing policy, so that
users can trade off the size of pg_clog against the amount of freezing work
done. Revise the already-existing code that forces autovacuum of tables
approaching the wraparound point to make it more bulletproof; also, revise the
autovacuum logic so that anti-wraparound vacuuming is done per-table rather
than per-database. initdb forced because of changes in pg_class, pg_database,
and pg_autovacuum catalogs. Heikki Linnakangas, Simon Riggs, and Tom Lane.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
SLRU area. The number of slots is still a compile-time constant (someday
we might want to change that), but at least it's a different constant for
each SLRU area. Increase number of subtrans buffers to 32 based on
experimentation with a heavily subtrans-bashing test case, and increase
number of multixact member buffers to 16, since it's obviously silly for
it not to be at least twice the number of multixact offset buffers.
lock, not exclusive, if the desired page is already in memory. This can
be demonstrated to be a significant win on the pg_subtrans cache when there
is a large window of open transactions. It should be useful for pg_clog
as well. I didn't try to make GetMultiXactIdMembers() use the code, as
that would have taken some restructuring, and what with the local cache
for multixact contents it probably wouldn't really make a difference.
Per my recent proposal.
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
the remainder of the current clog page during system startup. While
this was a good idea, it turns out the code fails if nextXid is
exactly at a page boundary, because we won't have created the "current"
clog page yet in that case. Since the page will be correctly zeroed
when we execute the first transaction on it, the solution is just to
do nothing when exactly at a page boundary. Per trouble report from
Dave Hartwig.
updates are no longer WAL-logged nor even fsync'd; we do not need to,
since after a crash no old pg_subtrans data is needed again. We truncate
pg_subtrans to RecentGlobalXmin at each checkpoint. slru.c's API is
refactored a little bit to separate out the necessary decisions.
