Without "b", a variant of the tas() code miscompiles on macOS 10.4.
This may also fix a compilation failure involving macOS 10.1. Today's
compilers have been allocating acceptable registers with or without this
change, but this future-proofs the code by precisely conveying the
acceptable registers. Back-patch to 9.4 (all supported versions).
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20191009063900.GA4066266@rfd.leadboat.com
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Logical walsender should exit when it catches up with sending WAL during
shutdown; but there was a rare corner case when it failed to because of
a race condition that puts it back to wait for more WAL instead -- but
since there wasn't any, it'd not shut down immediately. It would only
continue the shutdown when wal_sender_timeout terminates the sleep,
which causes annoying waits during shutdown procedure. Restructure the
code so that we no longer forget to set WalSndCaughtUp in that case.
This was an oversight in commit c6c333436.
Backpatch all the way down to 9.4.
Author: Craig Ringer, Álvaro Herrera
Discussion: https://postgr.es/m/CAMsr+YEuz4XwZX_QmnX_-2530XhyAmnK=zCmicEnq1vLr0aZ-g@mail.gmail.com
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio
Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Commits 801c2dc7 and 801c2dc7 made it possible for vacuum to
try to freeze a multixact that is still running. That was
prevented by a check, but raised an error. Repair.
Back-patch all the way.
Author: Nathan Bossart, Jeremy Schneider
Reported-by: Jeremy Schneider
Reviewed-by: Jim Nasby, Thomas Munro
Discussion: https://postgr.es/m/DAFB8AFF-2F05-4E33-AD7F-FF8B0F760C17%40amazon.com
Commit 8d48e6a724 uses RELKIND_ constants when building the query, but
did not include the header defining them. On 10+ this header is already
included, but on 9.6 and earlier it was missing. It compiles just fine,
but then fails during execution
ERROR: column "relkind_relation" does not exist
Fix by adding the necessary header file, and backpatch to 9.4-.
Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
The pg_upgrade check for pg_catalog.line data type when upgrading from
9.3 had a couple of issues with domains and composite types. Firstly, it
triggered false positives for composite types unused in objects with
storage. This was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE line_composite AS (l pg_catalog.line)
On the other hand, this only happened with composite types directly on
the pg_catalog.line data type, but not with a domain. So this was not
detected
CREATE DOMAIN line_domain AS pg_catalog.line;
CREATE TYPE line_composite_2 AS (l line_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.line data type through a domain. So we missed cases like this
CREATE TABLE t (l line_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. 9.3 did not
support domains on composite types, but we can still have multi-level
composite types.
Backpatch all the way to 9.4, where the format for pg_catalog.line data
type changed.
Author: Tomas Vondra
Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
With xlc v16.1.0, it causes internal compiler errors. With xlc versions
not exhibiting that bug, removing -qsrcmsg merely changes the compiler
error reporting format. Back-patch to 9.4 (all supported versions).
Discussion: https://postgr.es/m/20191003064105.GA3955242@rfd.leadboat.com
The file descriptor was opened with read-only to fsync a regular file,
which would cause EBADFD errors on some platforms.
This is similar to the recent fix done by a586cc4b (which was broken by
me with 82a5649), except that I noticed this issue while monitoring the
backend code for similar mistakes. Backpatch to 9.4, as this has been
introduced since logical decoding exists as of b89e151.
Author: Michael Paquier
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20191006045548.GA14532@paquier.xyz
Backpatch-through: 9.4
The postmaster's code path for spawning a bgworker neglected to check
whether we already have the max number of live child processes. That's
a bit hard to hit, since it would necessarily be a transient condition;
but if we do, AssignPostmasterChildSlot() fails causing a postmaster
crash, as seen in a report from Bhargav Kamineni.
To fix, invoke canAcceptConnections() in the bgworker code path, as we
do in the other code paths that spawn children. Since we don't want
the same pmState tests in this case, add a child-process-type parameter
to canAcceptConnections() so that it can know what to do.
Back-patch to 9.5. In principle the same hazard exists in 9.4, but the
code is enough different that this patch wouldn't quite fix it there.
Given the tiny usage of bgworkers in that branch it doesn't seem worth
creating a variant patch for it.
Discussion: https://postgr.es/m/18733.1570382257@sss.pgh.pa.us
This prints the unexpected value in more failure cases, and it removes
forty-eight hand-maintained error messages. Back-patch to 9.5, which
introduced these tests.
Reviewed (in an earlier version) by Andres Freund.
Discussion: https://postgr.es/m/20190915160021.GA24376@alvherre.pgsql
One of the upsert related tests is unstable (sometimes even hanging
until isolationtester's step timeout is reached). Based on preliminary
analysis that might be a problem outside of just that test, but not
really related to EPQ and triggers. Disable for now, to get the
buildfarm greener again.
Discussion: https://postgr.es/m/20191004222437.45qmglpto43pd3jb@alap3.anarazel.de
Backpatch: 9.6-, just like c8841199509.
As evidenced by bug #16036 this area is woefully under-tested. Add
fairly extensive tests for the combination.
Backpatch back to 9.6 - before that isolationtester was not capable
enough. While we don't backpatch tests all the time, future fixes to
trigger.c would potentially look different enough in 12+ from the
earlier branches that introducing bugs during backpatching is more
likely than normal. Also, it's just a crucial and undertested area of
the code.
Author: Andres Freund
Discussion: https://postgr.es/m/16036-28184c90d952fb7f@postgresql.org
Backpatch: 9.6-, the earliest these tests work
First, make sure that the .exe name is quoted when trying to get the
version number. Also, don't quote the lib name for using in the project
files if it's already been quoted. This second change applies to all
libraries, not just OpenSSL.
This has clearly been broken forever, so backpatch to all live branches.
Commit 5ac0d9360 failed to entirely fix bitshiftright's habit of
leaving one-bits in the pad space that should be all zeroes,
because in a moment of sheer brain fade I'd concluded that only
the code path used for not-a-multiple-of-8 shift distances needed
to be fixed. Of course, a multiple-of-8 shift distance can also
cause the problem, so we need to forcibly zero the extra bits
in both cases.
Per bug #16037 from Alexander Lakhin. As before, back-patch to all
supported branches.
Discussion: https://postgr.es/m/16037-1d1ebca564db54f4@postgresql.org
Encoding conversion uses the very simplistic rule that the output
can't be more than 4X longer than the input, and palloc's a buffer
of that size. This results in failure to convert any string longer
than 1/4 GB, which is becoming an annoying limitation.
As a band-aid to improve matters, allow the allocated output buffer
size to exceed 1GB. We still insist that the final result fit into
MaxAllocSize (1GB), though. Perhaps it'd be safe to relax that
restriction, but it'd require close analysis of all callers, which
is daunting (not least because external modules might call these
functions). For the moment, this should allow a 2X to 4X improvement
in the longest string we can convert, which is a useful gain in
return for quite a simple patch.
Also, once we have successfully converted a long string, repalloc
the output down to the actual string length, returning the excess
to the malloc pool. This seems worth doing since we can usually
expect to give back several MB if we take this path at all.
This still leaves much to be desired, most notably that the assumption
that MAX_CONVERSION_GROWTH == 4 is very fragile, and yet we have no
guard code verifying that the output buffer isn't overrun. Fixing
that would require significant changes in the encoding conversion
APIs, so it'll have to wait for some other day.
The present patch seems safely back-patchable, so patch all supported
branches.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/20190816181418.GA898@alvherre.pgsql
Discussion: https://postgr.es/m/3614.1569359690@sss.pgh.pa.us
Up to now, if you resized a large (>8K) palloc chunk down to a smaller
size, aset.c made no attempt to return any space to the malloc pool.
That's unpleasant if a really large allocation is resized to a
significantly smaller size. I think no such cases existed when this
code was designed, and I'm not sure whether they're common even yet,
but an upcoming fix to encoding conversion will certainly create such
cases. Therefore, fix AllocSetRealloc so that it gives realloc()
a chance to do something with the block. This doesn't noticeably
increase complexity, we mostly just have to change the order in which
the cases are considered.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/20190816181418.GA898@alvherre.pgsql
Discussion: https://postgr.es/m/3614.1569359690@sss.pgh.pa.us
query_tree_walker and query_tree_mutator were skipping the
windowClause of the query, without regard for the fact that the
startOffset and endOffset in a WindowClause node are expression trees
that need to be processed. This was an oversight in commit ec4be2ee6
from 2010 which added the expression fields; the main symptom is that
function parameters in window frame clauses don't work in inlined
functions.
Fix (as conservatively as possible since this needs to not break
existing out-of-tree callers) and add tests.
Backpatch all the way, since this has been broken since 9.0.
Per report from Alastair McKinley; fix by me with kibitzing and review
from Tom Lane.
Discussion: https://postgr.es/m/DB6PR0202MB2904E7FDDA9D81504D1E8C68E3800@DB6PR0202MB2904.eurprd02.prod.outlook.com
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Backpatch to 9.5, like the previous commit.
Author: Sawada Masahiko
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/CAD21AoBO_eDQub6zojFnWtnmutRBWvYf7=cW4Hsqj+U_R26w3Q@mail.gmail.com
Backpatch-through: 9.5
The test name and the following test cases suggest the index created
should be hash index, but it forgot to add 'using hash' in the test case.
This in itself won't improve code coverage as there were some other tests
which were covering the corresponding code. However, it is better if the
added tests serve their actual purpose.
Reported-by: Paul A Jungwirth
Author: Paul A Jungwirth
Reviewed-by: Mahendra Singh
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CA+renyV=Us-5XfMC25bNp-uWSj39XgHHmGE9Rh2cQKMegSj52g@mail.gmail.com
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov
Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Discussion: https://postgr.es/m/156614120484.1310.310161642239149585@wrigleys.postgresql.org
If the bitstring length is not a multiple of 8, we'd shift the
rightmost bits into the pad space, which must be zeroes --- bit_cmp,
for one, depends on that. This'd lead to the result failing to
compare equal to what it should compare equal to, as reported in
bug #16013 from Daryl Waycott.
This is, if memory serves, not the first such bug in the bitstring
functions. In hopes of making it the last one, do a bit more work
than minimally necessary to fix the bug:
* Add assertion checks to bit_out() and varbit_out() to complain if
they are given incorrectly-padded input. This will improve the
odds that manual testing of any new patch finds problems.
* Encapsulate the padding-related logic in macros to make it
easier to use.
Also, remove unnecessary padding logic from bit_or() and bitxor().
Somebody had already noted that we need not re-pad the result of
bit_and() since the inputs are required to be the same length,
but failed to extrapolate that to the other two.
Also, move a comment block that once was near the head of varbit.c
(but people kept putting other stuff in front of it), to put it in
the header block.
Note for the release notes: if anyone has inconsistent data as a
result of saving the output of bitshiftright() in a table, it's
possible to fix it with something like
UPDATE mytab SET bitcol = ~(~bitcol) WHERE bitcol != ~(~bitcol);
This has been broken since day one, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/16013-c2765b6996aacae9@postgresql.org
DST law changes in Fiji and Norfolk Island. Historical corrections
for Alberta, Austria, Belgium, British Columbia, Cambodia, Hong Kong,
Indiana (Perry County), Kaliningrad, Kentucky, Michigan, Norfolk
Island, South Korea, and Turkey.
This commit improves subject in two ways:
* It removes ugliness of 02f90879e7, which stores distance values and null
flags in two separate arrays after GISTSearchItem struct. Instead we pack
both distance value and null flag in IndexOrderByDistance struct. Alignment
overhead should be negligible, because we typically deal with at most few
"col op const" expressions in ORDER BY clause.
* It fixes handling of "col op NULL" expression in KNN-SP-GiST. Now, these
expression are not passed to support functions, which can't deal with them.
Instead, NULL result is implicitly assumed. It future we may decide to
teach support functions to deal with NULL arguments, but current solution is
bugfix suitable for backpatch.
Reported-by: Nikita Glukhov
Discussion: https://postgr.es/m/826f57ee-afc7-8977-c44c-6111d18b02ec%40postgrespro.ru
Author: Nikita Glukhov
Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
It's important users be able to know (without looking at the source code)
that running DDL or DDL-like commands can interrupt autovacuum which can
lead to a lot of dead tuples and hence slower database operations.
Reported-by: James Coleman
Author: James Coleman
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CAAaqYe-XYyNwML1=f=gnd0qWg46PnvD=BDrCZ5-L94B887XVxQ@mail.gmail.com
1. Commit 7086be6e3 should have documented the limitation that the direct
modification is disabled when WCO constraints are present, but didn't,
which is definitely my fault. Update the documentation (Postgres 9.6
onwards).
2. Commit fc22b6623 should have documented the limitation that the direct
modification is disabled when generated columns are defined, but
didn't. Update the documentation (Postgres 12 onwards).
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK14AYCPunLb6TRz1CQsW5Le01Z2ox8LSOKH0P-cOVDcQRA%40mail.gmail.com
PostgreSQL has been unusable when built with xlc 13 and newer, which are
incompatible with our use of __fetch_and_add(). Back-patch to 9.5,
which introduced pg_atomic_fetch_add_u32().
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20190831071157.GA3251746@rfd.leadboat.com
Most WAL records are ignored in early SnapBuild snapshot build phases.
But it's critical to process some of them, so that later messages have
the correct transaction state after the snapshot is completely built; in
particular, XLOG_XACT_ASSIGNMENT messages are critical in order for
sub-transactions to be correctly assigned to their parent transactions,
or at least one assert misbehaves, as reported by Ildar Musin.
Diagnosed-by: Masahiko Sawada
Author: Masahiko Sawada
Discussion: https://postgr.es/m/CAONYFtOv+Er1p3WAuwUsy1zsCFrSYvpHLhapC_fMD-zNaRWxYg@mail.gmail.com
Lack of parens in the definitions could cause a statement using these
macros to have unexpected semantics. In current code no bug is
apparent, but best to fix the definitions to avoid problems down the
line.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/19795.1568400476@sss.pgh.pa.us
Include newitemoff in rmgr desc output for nbtree page split records.
In passing, correct an obsolete comment that claimed that newitemoff is
only logged for _L variant nbtree page split WAL records.
Both issues were oversights in commit 2c03216d831, which revamped the
WAL format.
Author: Peter Geoghegan
Backpatch: 9.5-, where the WAL format was revamped.
Since WITH CHECK OPTION was introduced, ExecInitModifyTable has
initialized WCO expressions with the wrong plan node as parent -- that is,
it passed its input subplan not the ModifyTable node itself. Up to now
we thought this was harmless, but bug #16006 from Vinay Banakar shows it's
not: if the input node is a SubqueryScan then ExecInitWholeRowVar can get
confused into doing the wrong thing. (The fact that ExecInitWholeRowVar
contains such logic is certainly a horrid kluge that doesn't deserve to
live, but figuring out another way to do that is a task for some other day.)
Andres had already noticed the wrong-parent mistake and fixed it in commit
148e632c0, but not being aware of any user-visible consequences, he quite
reasonably didn't back-patch. This patch is simply a back-patch of
148e632c0, plus addition of a test case based on bug #16006. I also added
the test case to v12/HEAD, even though the bug is already fixed there.
Back-patch to all supported branches. 9.4 lacks RLS policies so the
new test case doesn't work there, but I'm pretty sure a test could be
devised based on using a whole-row Var in a plain WITH CHECK OPTION
condition. (I lack the cycles to do so myself, though.)
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/16006-99290d2e4642cbd5@postgresql.org
Discussion: https://postgr.es/m/20181205225213.hiwa3kgoxeybqcqv@alap3.anarazel.de
9ee98cc3f added missing doc for pg_trgm.strict_word_similarity_threshold GUC.
But it was accidentally backpatched to 9.6, while this GUC was introduced only
in 11. This patch removes extra doc from 9.6 and 10.
Discussion: https://postgr.es/m/CAHE3wghn%3DRyPWY-nxX1SiYAfkuwLHMd9Z4r8v9ww_jSs1jF5pg%40mail.gmail.com
Author: Euler Taveira
Backpatch-through: 9.6 and 10
The example used to explain 'Looping Through Query Results' uses
pseudo-materialized views. Replace it with a more up-to-date example
which does the same thing with actual materialized views, which have
been available since PostgreSQL 9.3.
In the passing, change '%' as format specifier instead of '%s' as is used
in other examples in plpgsql.sgml.
Reported-by: Ian Barwick
Author: Ian Barwick
Reviewed-by: Amit Kapila
Backpatch-through: 9.4
Discussion: https://postgr.es/m/9a70d393-7904-4918-c97c-649f6d114b6a@2ndquadrant.com
Depending on the system used, t/*.pl may not be expanded into a list of
tests which can be consumed by prove when attempting to run TAP tests on
a given path. Fix that by using glob() directly in the script, to make
sure that a complete list of tests is provided. This has not proved to
be an issue with MSVC as the list was properly expanded, but it is on
Linux with perl's system().
This is extracted from a larger patch.
Author: Tom Lane
Discussion: https://postgr.es/m/6628.1567958876@sss.pgh.pa.us
Backpatch-through: 9.4
Back-patch relevant parts of these commits:
30717637c Fix isolationtester race condition for notices sent before blocking
ebd499282 Don't drop NOTICE messages in isolation tests
a28e10e82 Indicate session name in isolationtester notices
This ensures that older versions of the isolationtester will handle
NOTICE/WARNING messages the same way as HEAD and v12 do. While this
isn't fixing any critical problem right now, it seems like a prudent
change to prevent surprises (like we had yesterday...) with
back-patches of future isolation test changes.
Back-patch as far as 9.6. Due to the significant changes we made in
isolationtester in 9.6, back-patching isolation tests further than
that is going to be risky anyway; besides, this patch doesn't apply
cleanly before that.
Discussion: https://postgr.es/m/E1i7IqC-0000Uc-5H@gemulon.postgresql.org
Modern versions of msys2 have changed the treatment of "cmd /c" so that
the runtime will try to convert the switch to a native file path. This
patch adds a setting to inhibit that behaviour.
Discussion: https://postgr.es/m/3227042f-cfcc-745a-57dd-fb8c471f8ddf@2ndQuadrant.com
Backpatch to all live branches.
Some of these are quite old, but that doesn't make them not bugs.
We'd rather report a failure via elog than SIGSEGV.
While at it, uniformly spell the error check as !RelationIsValid(rel)
rather than a bare rel == NULL test. The machine code is the same
but it seems better to be consistent.
Coverity complained about this today, not sure why, because the
mistake is in fact old.
