In most scenarios a portal without a ResourceOwner is dead and not subject
to any further execution, but a portal for a cursor WITH HOLD remains in
existence with no ResourceOwner after the creating transaction is over.
In this situation, if we attempt to "execute" the portal directly to fetch
data from it, we were setting CurrentResourceOwner to NULL, leading to a
segfault if the datatype output code did anything that required a resource
owner (such as trying to fetch system catalog entries that weren't already
cached). The case appears to be impossible to provoke with stock libpq,
but psqlODBC at least is able to cause it when working with held cursors.
Simplest fix is to just skip the assignment to CurrentResourceOwner, so
that any resources used by the data output operations will be managed by
the transaction-level resource owner instead. For consistency I changed
all the places that install a portal's resowner as current, even though
some of them are probably not reachable with a held cursor's portal.
Per report from Joshua Berry (with thanks to Hiroshi Inoue for developing
a self-contained test case). Back-patch to all supported versions.
When the existing code here was written, it made sense to special-case
RowExprs because that was the only way that we could handle row comparisons
at all. Now that we have record_eq() and arrays of composites, the generic
logic for "scalar" types will in fact work on RowExprs too, so there's no
reason to throw error for combinations of RowExprs and other ways of
forming composite values, nor to ignore the possibility of using a
ScalarArrayOpExpr. But keep using the old logic when comparing two
RowExprs, for consistency with the main transformAExprOp() logic. (This
allows some cases with not-quite-identical rowtypes to succeed, so we might
get push-back if we removed it.) Per bug #8198 from Rafal Rzepecki.
Back-patch to all supported branches, since this works fine as far back as
8.4.
Rafal Rzepecki and Tom Lane
Long-standing code has called tolower() on identifier character bytes
with the high bit set. This is clearly an error and produces junk output
when the encoding is multi-byte. This patch therefore restricts this
activity to cases where there is a character with the high bit set AND
the encoding is single-byte.
There have been numerous gripes about this, most recently from Martin
Schäfer.
Backpatch to all live releases.
The planner is aware that it mustn't push down upper-level quals into
subqueries if the quals reference subquery output columns that contain
set-returning functions or volatile functions, or are non-DISTINCT outputs
of a DISTINCT ON subquery. However, it missed making this check when
there were one or more levels of UNION or INTERSECT above the dangerous
expression. This could lead to "set-valued function called in context that
cannot accept a set" errors, as seen in bug #8213 from Eric Soroos, or to
silently wrong answers in the other cases.
To fix, refactor the checks so that we make the column-is-unsafe checks
during subquery_is_pushdown_safe(), which already has to recursively
inspect all arms of a set-operation tree. This makes
qual_is_pushdown_safe() considerably simpler, at the cost that we will
spend some cycles checking output columns that possibly aren't referenced
in any upper qual. But the cases where this code gets executed at all
are already nontrivial queries, so it's unlikely anybody will notice any
slowdown of planning.
This has been broken since commit 05f916e6ad,
which makes the bug over ten years old. A bit surprising nobody noticed it
before now.
PathNameOpenFile failed to ensure that the correct value of errno was
returned to its caller after a failure (because it incorrectly supposed
that free() can never change errno). In some cases this would result
in a user-visible failure because an expected ENOENT errno was replaced
with something else. Bogus EINVAL failures have been observed on OS X,
for example.
There were also a couple of places that could mangle an important value
of errno if FDDEBUG was defined. While the usefulness of that debug
support is highly debatable, we might as well make it safe to use,
so add errno save/restore logic to the DO_DB macro.
Per bug #8167 from Nelson Minar, diagnosed by RhodiumToad.
Back-patch to all supported branches.
If OID wraparound should occur while in standalone mode (unlikely but
possible), we want to advance the counter to FirstNormalObjectId not
FirstBootstrapObjectId. Otherwise, user objects might be created with OIDs
in the system-reserved range. That isn't immediately harmful but it poses
a risk of conflicts during future pg_upgrade operations.
Noted by Andres Freund. Back-patch to all supported branches, since all of
them are supported sources for pg_upgrade operations.
This case doesn't normally happen, because the planner usually clamps
all row estimates to at least one row; but I found that it can arise
when dealing with relations excluded by constraints. Without a defense,
estimate_num_groups() can return zero, which leads to divisions by zero
inside the planner as well as assertion failures in the executor.
An alternative fix would be to change set_dummy_rel_pathlist() to make
the size estimate for a dummy relation 1 row instead of 0, but that seemed
pretty ugly; and probably someday we'll want to drop the convention that
the minimum rowcount estimate is 1 row.
Back-patch to 8.4, as the problem can be demonstrated that far back.
Restore 4-byte designation for docs. Fix 9.3 doc query to properly pad
to four digits.
Backpatch to all active branches
Per suggestions from Ian Lawrence Barwick
There was a high probability of two or more concurrent C.I.C. commands
deadlocking just before completion, because each would wait for the others
to release their reference snapshots. Fix by releasing the snapshot
before waiting for other snapshots to go away.
Per report from Paul Hinze. Back-patch to all active branches.
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
I changed this in commit fd15dba543, but
missed the fact that the SGML documentation of the function specified
exactly what it did. Well, one of the two places where it's specified
documented that --- probably I looked at the other place and thought
nothing needed to be done. Sync the two places where encode() and
decode() are described.
Previously, if the postmaster initialized OpenSSL's PRNG (which it will do
when ssl=on in postgresql.conf), the same pseudo-random state would be
inherited by each forked child process. The problem is masked to a
considerable extent if the incoming connection uses SSL encryption, but
when it does not, identical pseudo-random state is made available to
functions like contrib/pgcrypto. The process's PID does get mixed into any
requested random output, but on most systems that still only results in 32K
or so distinct random sequences available across all Postgres sessions.
This might allow an attacker who has database access to guess the results
of "secure" operations happening in another session.
To fix, forcibly reset the PRNG after fork(). Each child process that has
need for random numbers from OpenSSL's generator will thereby be forced to
go through OpenSSL's normal initialization sequence, which should provide
much greater variability of the sequences. There are other ways we might
do this that would be slightly cheaper, but this approach seems the most
future-proof against SSL-related code changes.
This has been assigned CVE-2013-1900, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Back-patch to all supported branches.
Marko Kreen
Dumping invalid indexes can cause problems at restore time, for example
if the reason the index creation failed was because it tried to enforce
a uniqueness condition not satisfied by the table's data. Also, if the
index creation is in fact still in progress, it seems reasonable to
consider it to be an uncommitted DDL change, which pg_dump wouldn't be
expected to dump anyway.
Back-patch to all active versions, and teach them to ignore invalid
indexes in servers back to 8.2, where the concept was introduced.
Michael Paquier
Most (all?) of Russia has moved to what's effectively year-round daylight
savings time, so that the "standard" zone names now mean an hour later
than they used to. Update that, notably changing MSK as per recent
complaint from Sergey Konoplev, but also CHOT, GET, IRKT, KGT, KRAT,
MAGT, NOVT, OMST, VLAT, YAKT, YEKT. The corresponding DST abbreviations
are presumably now obsolete, but I left them in place with their old
definitions, just to reduce any possible breakage from this change.
Also add VOLT (Europe/Volgograd), which for some reason we never had
before, as well as MIST (Antarctica/Macquarie), and fix obsolete
definitions of MAWT, TKT, and WST.
Doing that results in a broken index entry in PDF output. We had only
a few like that, which is probably why nobody noticed before.
Standardize on putting the <term> first.
Josh Kupershmidt
The docs showed that early-January dates can be considered part of the
previous year for week-counting purposes, but failed to say explicitly
that late-December dates can also be considered part of the next year.
Fix that, and add a cross-reference to the "isoyear" field. Per bug
#7967 from Pawel Kobylak.
The previous coding of this function could get into situations where it
would never terminate, because successive passes would re-add EMPTY arcs
that had been removed by the previous pass. Rewrite the function
completely using a new algorithm that is guaranteed to terminate, and
also seems to be usually faster than the old one. Per Tcl bugs 3604074
and 3606683.
Tom Lane and Don Porter
formatting.c used locale-dependent case folding rules in some code paths
where the result isn't supposed to be locale-dependent, for example
to_char(timestamp, 'DAY'). Since the source data is always just ASCII
in these cases, that usually didn't matter ... but it does matter in
Turkish locales, which have unusual treatment of "i" and "I". To confuse
matters even more, the misbehavior was only visible in UTF8 encoding,
because in single-byte encodings we used pg_toupper/pg_tolower which
don't have locale-specific behavior for ASCII characters. Fix by providing
intentionally ASCII-only case-folding functions and using these where
appropriate. Per bug #7913 from Adnan Dursun. Back-patch to all active
branches, since it's been like this for a long time.
I fixed this code back in commit 841b4a2d5, but didn't think carefully
enough about the behavior near zero, which meant it improperly rejected
1999-12-31 24:00:00. Per report from Magnus Hagander.
Careless use of TopMemoryContext for I/O function data meant that repeated
use of spi_prepare and spi_freeplan would leak memory at the session level,
as per report from Christian Schröder. In addition, spi_prepare
leaked a lot of transient data within the current plperl function's SPI
Proc context, which would be a problem for repeated use of spi_prepare
within a single plperl function call; and it wasn't terribly careful
about releasing permanent allocations in event of an error, either.
In passing, clean up some copy-and-pasteos in query-lookup error messages.
Alex Hunsaker and Tom Lane
parseqatom() failed to check for an error return (NULL result) from its
recursive call to parsebranch(), and in consequence could crash with a
null-pointer dereference after an error return. This bug has been there
since day one, but wasn't noticed before, probably because most error cases
in parsebranch() didn't actually lead to returning NULL. Add the missing
error check, and also tweak parsebranch() to exit in a less indirect
fashion after a call to parseqatom() fails.
Report by Tomasz Karlik, fix by me.
If a database name contained a '=' character, pg_dumpall failed. The problem
was in the way pg_dumpall passes the database name to pg_dump on the
command line. If it contained a '=' character, pg_dump would interpret it
as a libpq connection string instead of a plain database name.
To fix, pass the database name to pg_dump as a connection string,
"dbname=foo", with the database name escaped if necessary.
Back-patch to all supported branches.
Cases such as similarity('', '') produced a NaN result due to computing
0/0. Per discussion, make it return zero instead.
This appears to be the basic cause of bug #7867 from Michele Baravalle,
although it remains unclear why her installation doesn't think Cyrillic
letters are letters.
Back-patch to all active branches.
After further reflection I was unconvinced that the existing coding is
guaranteed to return valid union datums in every code path for multi-column
indexes. Fix that by forcing a gistunionsubkey() call at the end of the
recursion. Having done that, we can remove some clearly-redundant calls
elsewhere. This should be a little faster for multi-column indexes (since
the previous coding would uselessly do such a call for each column while
unwinding the recursion), as well as much harder to break.
Also, simplify the handling of cases where one side or the other of a
primary split contains only don't-care tuples. The previous coding used a
very ugly hack in removeDontCares() that essentially forced one random
tuple to be treated as non-don't-care, providing a random initial choice of
seed datum for the secondary split. It seems unlikely that that method
will give better-than-random splits. Instead, treat such a split as
degenerate and just let the next column determine the split, the same way
that we handle fully degenerate cases where the two sides produce identical
union datums.
This LOG message was put in over five years ago with the evident
expectation that we'd make all GiST opclasses support secondary split
directly. However, no such thing ever happened, and indeed the number of
opclasses supporting it decreased to zero in 9.2. The reason is that
improving on the default implementation isn't that easy --- the
opclass-specific code that did exist, before 9.2, doesn't appear to have
been any improvement over the default.
Hence, remove the message altogether. There's certainly no point in
nagging users about this in released branches, but I doubt that we'll
ever implement complete opclass-specific support anyway.
Improve comments, rename some variables and functions, slightly simplify
a couple of APIs, in an attempt to make this code readable by people other
than its original author.
Even though this is essentially just cosmetic, back-patch to all active
branches, because otherwise it's going to make back-patching future fixes
in this file very painful.
While there's considerable doubt that we want fuzzy behavior in the
geometric operators at all (let alone as currently implemented), nobody is
stepping forward to redesign that stuff. In the meantime it behooves us
to make sure that index searches agree with the behavior of the underlying
operators. This patch fixes two problems in this area.
First, gist_box_same was using fuzzy equality, but it really needs to use
exact equality to prevent not-quite-identical upper index keys from being
treated as identical, which for example would prevent an existing upper
key from being extended by an amount less than epsilon. This would result
in inconsistent indexes. (The next release notes will need to recommend
that users reindex GiST indexes on boxes, polygons, circles, and points,
since all four opclasses use gist_box_same.)
Second, gist_point_consistent used exact comparisons for upper-page
comparisons in ~= searches, when it needs to use fuzzy comparisons to
ensure it finds all matches; and it used fuzzy comparisons for point <@ box
searches, when it needs to use exact comparisons because that's what the
<@ operator (rather inconsistently) does.
The added regression test cases illustrate all three misbehaviors.
Back-patch to all active branches. (8.4 did not have GiST point_ops,
but it still seems prudent to apply the gist_box_same patch to it.)
Alexander Korotkov, reviewed by Noah Misch
The previous coding supposed that the first differing bytes in two varlena
datums must have the same sign difference as their overall comparison
result. This is obviously bogus for text strings in non-C locales, and
probably wrong for numeric, and even for bytea I think it was wrong on
machines where char is signed. When the assumption failed, the function
could deliver a zero or negative penalty in situations where such a result
is quite ridiculous, leading the core GiST code to make very bad page-split
decisions.
To fix, take the absolute values of the byte-level differences. Also,
switch the code to using unsigned char not just char, so that the behavior
will be consistent whether char is signed or not.
Per investigation of a trouble report from Tomas Vondra. Back-patch to all
supported branches.
gbt_var_bin_union() failed to do the right thing when the existing range
needed to be widened at both ends rather than just one end. This could
result in an invalid index in which keys that are present would not be
found by searches, because the searches would not think they need to
descend to the relevant leaf pages. This error affected all the varlena
datatypes supported by btree_gist (text, bytea, bit, numeric).
Per investigation of a trouble report from Tomas Vondra. (There is also
an issue in gbt_var_penalty(), but that should only result in inefficiency
not wrong answers. I'm committing this separately so that we have a git
state in which it can be tested that bad penalty results don't produce
invalid indexes.) Back-patch to all supported branches.
When considering a non-last column in a multi-column GiST index,
gistsplit.c tries to improve on the split chosen by the opclass-specific
pickSplit function by considering penalties for the next column. However,
there were two bugs in this code: it failed to recompute the union keys for
the leftmost index columns, even though these might well change after
reassigning tuples; and it included the old union keys in the recomputation
for the columns it did recompute, so that those keys couldn't get smaller
even if they should. The first problem could result in an invalid index
in which searches wouldn't find index entries that are in fact present;
the second would make the index less efficient to search.
Both of these errors were caused by misuse of gistMakeUnionItVec, whose
API was designed in a way that just begged such errors to be made. There
is no situation in which it's safe or useful to compute the union keys for
a subset of the index columns, and there is no caller that wants any
previous union keys to be included in the computation; so the undocumented
choice to treat the union keys as in/out rather than pure output parameters
is a waste of code as well as being dangerous.
Hence, rather than just making a minimal patch, I've changed the API of
gistMakeUnionItVec to remove the "startkey" parameter (it now always
processes all index columns) and treat the attr/isnull arrays as purely
output parameters.
In passing, also get rid of a couple of unnecessary and dangerous uses
of static variables in gistutil.c. It's remarkable that the one in
gistMakeUnionKey hasn't given us portability troubles before now, because
in addition to posing a re-entrancy hazard, it was unsafely assuming that
a static char[] array would have at least Datum alignment.
Per investigation of a trouble report from Tomas Vondra. (There are also
some bugs in contrib/btree_gist to be fixed, but that seems like material
for a separate patch.) Back-patch to all supported branches.
