Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
It's rather silly to make a separate pass over the tlist + HAVING qual,
and a separate set of visits to the syscache, when get_agg_clause_costs
already has all the required information in hand. This nets out as less
code as well as fewer cycles.
The original coding had three separate booleans representing partial
aggregation behavior, which was confusing, unreadable, and error-prone,
not least because the booleans weren't always listed in the same order.
It was also inadequate for the allegedly-desirable future extension to
support intermediate partial aggregation, because we'd need separate
markers for serialization and deserialization in such a case.
Merge these bools into an enum "AggSplit" to provide symbolic names for
the supported operating modes (and document what those are). By assigning
the values of the enum constants carefully, we can treat AggSplit values
as options bitmasks so that tests of what to do aren't noticeably more
expensive than before.
While at it, get rid of Aggref.aggoutputtype. That's not needed since
commit 59a3795c2 got rid of setrefs.c's special-purpose Aggref comparison
code, and it likewise seemed more confusing than helpful.
Assorted comment cleanup as well (there's still more that I want to do
in that line).
catversion bump for change in Aggref node contents. Should be the last
one for partial-aggregation changes.
Discussion: <29309.1466699160@sss.pgh.pa.us>
Commit e06a38965's original coding for constructing the execution-time
expression tree for a combining aggregate was rather messy, involving
duplicating quite a lot of code in setrefs.c so that it could inject
a nonstandard matching rule for Aggrefs. Get rid of that in favor of
explicitly constructing a combining Aggref with a partial Aggref as input,
then allowing setref's normal matching logic to match the partial Aggref
to the output of the lower plan node and hence replace it with a Var.
In passing, rename and redocument make_partialgroup_input_target to have
some connection to what it actually does.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f7f and was partially fixed in a25c2b7c4db3.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4db3 but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
When the index is predicted to need more than NBuffers buckets,
CREATE INDEX attempts to sort the index entries by hash key before
insertion, so as to reduce thrashing. This code path got broken by
commit 9f03ca915196dfc8, which overlooked that _hash_form_tuple() is not
just an alias for index_form_tuple(). The index got built anyway, but
with garbage data, so that searches for pre-existing tuples always
failed. Fix by refactoring to separate construction of the indexable
data from calling index_form_tuple().
Per bug #14210 from Daniel Newman. Back-patch to 9.5 where the
bug was introduced.
Report: <20160623162507.17237.39471@wrigleys.postgresql.org>
This was inadvertantly omitted from commit
7655f4ccea570d57c4d473cd66b755c03c904942. Mea culpa.
Backpatched to 9.5 where pager_min_lines was introduced.
A deserialize function's result is short-lived data during partial
aggregation, since we're just going to pass it to the combine function
and then it's of no use anymore. However, the built-in deserialize
functions allocated their results in the aggregate state context,
resulting in a query-lifespan memory leak. It's probably not possible for
this to amount to anything much at present, since the number of leaked
results would only be the number of worker processes. But it might become
a problem in future. To fix, don't use the same convenience subroutine for
setting up results that the aggregate transition functions use.
David Rowley
Report: <10050.1466637736@sss.pgh.pa.us>
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
Commit 0b0baf262 et al made this case print "(null)" on the grounds that
that's what happened on platforms that didn't crash. But neither behavior
was actually intentional. What we should print is just an empty string,
for compatibility with the behavior of SHOW and other ways of examining
string GUCs. Those code paths don't distinguish NULL from empty strings,
so we should not here either. Per gripe from Alain Radix.
Like the previous patch, back-patch to 9.2 where -C option was introduced.
Discussion: <CA+YdpwxPUADrmxSD7+Td=uOshMB1KkDN7G7cf+FGmNjjxMhjbw@mail.gmail.com>
The original upper-planner-pathification design (commit 3fc6e2d7f5b652b4)
assumed that we could always determine during Path formation whether or not
we would need a Result plan node to perform projection of a targetlist.
That turns out not to work very well, though, because createplan.c still
has some responsibilities for choosing the specific target list associated
with sorting/grouping nodes (in particular it might choose to add resjunk
columns for sorting). We might not ever refactor that --- doing so would
push more work into Path formation, which isn't attractive --- and we
certainly won't do so for 9.6. So, while create_projection_path and
apply_projection_to_path can tell for sure what will happen if the subpath
is projection-capable, they can't tell for sure when it isn't. This is at
least a latent bug in apply_projection_to_path, which might think it can
apply a target to a non-projecting node when the node will end up computing
something different.
Also, I'd tied the creation of a ProjectionPath node to whether or not a
Result is needed, but it turns out that we sometimes need a ProjectionPath
node anyway to avoid modifying a possibly-shared subpath node. Callers had
to use create_projection_path for such cases, and we added code to them
that knew about the potential omission of a Result node and attempted to
adjust the cost estimates for that. That was uncertainly correct and
definitely ugly/unmaintainable.
To fix, have create_projection_path explicitly check whether a Result
is needed and adjust its cost estimate accordingly, though it creates
a ProjectionPath in either case. apply_projection_to_path is now mostly
just an optimized version that can avoid creating an extra Path node when
the input is known to not be shared with any other live path. (There
is one case that create_projection_path doesn't handle, which is pushing
parallel-safe expressions below a Gather node. We could make it do that
by duplicating the GatherPath, but there seems no need as yet.)
create_projection_plan still has to recheck the tlist-match condition,
which means that if the matching situation does get changed by createplan.c
then we'll have made a slightly incorrect cost estimate. But there seems
no help for that in the near term, and I doubt it occurs often enough,
let alone would change planning decisions often enough, to be worth
stressing about.
I added a "dummypp" field to ProjectionPath to track whether
create_projection_path thinks a Result is needed. This is not really
necessary as-committed because create_projection_plan doesn't look at the
flag; but it seems like a good idea to remember what we thought when
forming the cost estimate, if only for debugging purposes.
In passing, get rid of the target_parallel parameter added to
apply_projection_to_path by commit 54f5c5150. I don't think that's a good
idea because it involves callers in what should be an internal decision,
and opens us up to missing optimization opportunities if callers think they
don't need to provide a valid flag, as most don't. For the moment, this
just costs us an extra has_parallel_hazard call when planning a Gather.
If that starts to look expensive, I think a better solution would be to
teach PathTarget to carry/cache knowledge of parallel-safety of its
contents.
The annotation for "ERROR: language "foo" is not trusted" used to say
"HINT: Only superusers can use untrusted languages", which was fairly
poorly thought out. For one thing, it's not a hint about what to do,
but a statement of fact, which makes it errdetail. But also, this
fails to clarify things much, because there's a missing step in the
chain of reasoning. I think it's more useful to say "GRANT and REVOKE
are not allowed on untrusted languages, because only superusers can use
untrusted languages".
It's been like this for a long time, but given the lack of previous
complaints, I don't think this is worth back-patching.
Discussion: <1417.1466289901@sss.pgh.pa.us>
This patch provides a new implementation of the logic added by commit
137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tomas Vondra and Tom Lane
Discussion: <31041.1465069446@sss.pgh.pa.us>
The previous code neglected the fact that the scanjoin_target might
carry sortgroupref labelings that we need to absorb. Instead, do
create_projection_path() unconditionally, and tweak the path's cost
estimate after the fact. (I'm now convinced that we ought to refactor
the way we account for sometimes not needing a separate projection step,
but right now is not the time for that sort of cleanup.)
Problem identified by Amit Kapila, patch by me.
When doing partial aggregation, the args list of the upper (combining)
Aggref node is replaced by a Var representing the output of the partial
aggregation steps, which has either the aggregate's transition data type
or a serialized representation of that. However, nodeAgg.c blindly
continued to use the args list as an indication of the user-level argument
types. This broke resolution of polymorphic transition datatypes at
executor startup (though it accidentally failed to fail for the ANYARRAY
case, which is likely the only one anyone had tested). Moreover, the
constructed FuncExpr passed to the finalfunc contained completely wrong
information, which would have led to bogus answers or crashes for any case
where the finalfunc examined that information (which is only likely to be
with polymorphic aggregates using a non-polymorphic transition type).
As an independent bug, apply_partialaggref_adjustment neglected to resolve
a polymorphic transition datatype before assigning it as the output type
of the lower-level Aggref node. This again accidentally failed to fail
for ANYARRAY but would be unlikely to work in other cases.
To fix the first problem, record the user-level argument types in a
separate OID-list field of Aggref, and look to that rather than the args
list when asking what the argument types were. (It turns out to be
convenient to include any "direct" arguments in this list too, although
those are not currently subject to being overwritten.)
Rather than adding yet another resolve_aggregate_transtype() call to fix
the second problem, add an aggtranstype field to Aggref, and store the
resolved transition type OID there when the planner first computes it.
(By doing this in the planner and not the parser, we can allow the
aggregate's transition type to change from time to time, although no DDL
support yet exists for that.) This saves nothing of consequence for
simple non-polymorphic aggregates, but for polymorphic transition types
we save a catalog lookup during executor startup as well as several
planner lookups that are new in 9.6 due to parallel query planning.
In passing, fix an error that was introduced into count_agg_clauses_walker
some time ago: it was applying exprTypmod() to something that wasn't an
expression node at all, but a TargetEntry. exprTypmod silently returned
-1 so that there was not an obvious failure, but this broke the intended
sensitivity of aggregate space consumption estimates to the typmod of
varchar and similar data types. This part needs to be back-patched.
Catversion bump due to change of stored Aggref nodes.
Discussion: <8229.1466109074@sss.pgh.pa.us>
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
Commit 04ae11f62e643e07c411c4935ea6af46cb112aa9 removed some broken
code to apply the scan/join target to partial paths, but its theory
that this processing step is totally unnecessary turns out to be wrong.
Put similar code back again, but this time, check for parallel-safety
and avoid in-place modifications to paths that may already have been
used as part of some other path.
(This is not an entirely elegant solution to this problem; it might
be better, for example, to postpone generate_gather_paths for the
topmost scan/join rel until after the scan/join target has been
applied. But this is not the time for such redesign work.)
Amit Kapila and Robert Haas
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
In commit 8c1d9d56e9a00680a035b8b333a98ea16b121eb7, I attempted to
add a regression test that would fail if the target list was pushed
into a parallel worker, but due to brain fade on my part, it just
randomly fails whether anything bad or not, because the error check
inside the parallel_restricted() function tests whether there is
*any process in the system* that is not connected to a client, not
whether the process running the query is not connected to a client.
A little experimentation has left me pessimistic about the
prospects of doing better here in a short amount of time, so let's
just fall back to checking that the plan is as we expect and leave
the execution-time check for another day.
The inet/cidr types sometimes failed to reject IPv6 inputs with too many
colon-separated fields, instead translating them to '::/0'. This is the
result of a thinko in the original ISC code that seems to be as yet
unreported elsewhere. Per bug #14198 from Stefan Kaltenbrunner.
Report: <20160616182222.5798.959@wrigleys.postgresql.org>
The fact that no workers were successfully launched in the previous
iteration does not excuse us from setting up properly to try again.
This appears to explain crashes I saw in parallel regression testing
due to error_mqh being NULL when it shouldn't be.
Minor other cosmetic fixes too.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
Emit "(null)" instead, which was the behavior all along on platforms
that don't crash, eg OS X. Per report from Jehan-Guillaume de Rorthais.
Back-patch to 9.2 where -C option was introduced.
Michael Paquier
Report: <20160615204036.2d35d86a@firost>
This allows the timestamps to follow local conventions (in particular,
they respond to the LC_TIME environment setting). In C locale you get
the same results as before. It seems like a good idea to do this now not
later because we already changed the format of \watch headers for 9.6.
Also, increase the buffer sizes a tad to ensure there's enough space for
translated strings.
Discussion: <20160612145532.GA22965@postgresql.kr>
Commit 14a254fb52423c57059851abafbd1247261f7f03 managed not to
exercise the code it was intended to test, and the comment explaining
why no "parallel worker" line showed up in the context wasn't right.
Amit Kapila, tweaked by me per Amit's analysis.
The new pg_check_visible() and pg_check_frozen() functions can be used to
verify that the visibility map bits for a relation's data pages match the
actual state of the tuples on those pages.
Amit Kapila and Robert Haas, reviewed (in earlier versions) by Andres
Freund. Additional testing help by Thomas Munro.
Commit a892234f830e832110f63fc0a2afce2fb21d1584 added a new bit per
page to the visibility map fork indicating whether the page is
all-frozen, but incorrectly assumed that if lazy_scan_heap chose to
freeze a tuple then that tuple would not need to later be frozen
again. This turns out to be false, because xmin and xmax (and
conceivably xvac, if dealing with tuples from very old releases) could
be frozen at separate times.
Thanks to Andres Freund for help in uncovering and tracking down this
issue.
currtid() and currtid2() call GetLatestSnapshot(), which fails in
parallel mode. pg_export_snapshot() calls ExportSnapshot() which
attempts to assign an XID for the current transaction if it does not
already have one; that, too, will fail in parallel mode.
Andreas Seltenreich
We disable statement_timeout and lock_timeout during dump and restore, to
prevent any global settings that might exist from breaking routine backups.
Commit c6dda1f48 should have added idle_in_transaction_session_timeout to
that list, but failed to.
Another place where these timeouts get turned off is autovacuum. While
I doubt an idle timeout could fire there, it seems better to be safe than
sorry.
pg_dump issue noted by Bernd Helmle, the other one found by grepping.
Report: <352F9B77DB5D3082578D17BB@eje.land.credativ.lan>
pg_type_aclmask reported the wrong type's OID when complaining that
it could not find a type's typelem. It also failed to provide a
suitable errcode when the initially given OID doesn't exist (which
is a user-facing error, since that OID can be user-specified).
pg_foreign_data_wrapper_aclmask and pg_foreign_server_aclmask likewise
lacked errcode specifications. Trivial cosmetic adjustments too.
The wrong-type-OID problem was reported by Petru-Florin Mihancea in
bug #14186; the other issues noted by me while reading the code.
These errors all seem to be aboriginal in the respective routines, so
back-patch as necessary.
Report: <20160613163159.5798.52928@wrigleys.postgresql.org>
The struct definition for PathTarget specifies that a NULL sortgrouprefs
pointer means no sortgroupref labels. While it's likely that there
should always be at least one labeled column in the places that were
unconditionally fetching through the pointer, it seems wiser to adhere to
the data structure specification and test first. Add a macro to make this
convenient. Per experimentation with running the regression tests with a
very small parallelization threshold --- the crash I observed may well
represent a bug elsewhere, but still this coding was not very robust.
Report: <20756.1465834072@sss.pgh.pa.us>
Apparently, at least some versions of Microsoft's shell fail on variable
assignments that have leading whitespace. This instance, introduced in
commit 680513ab7, managed to escape notice for awhile because it's only
invoked if building with OpenSSL. Per bug #14185 from Torben Dannhauer.
Report: <20160613140119.5798.78501@wrigleys.postgresql.org>
