ALTER TABLE ... SET EXPRESSION AS removes statistics for the target column,
so running ANALYZE afterward is recommended. But this was previously not
documented, even though a similar recommendation exists for
ALTER TABLE ... SET DATA TYPE, which also clears the column's statistics.
This commit updates the documentation to include the ANALYZE recommendation
for SET EXPRESSION AS.
Since v18, virtual generated columns are supported, and these columns never
have statistics. Therefore, ANALYZE is not needed after SET DATA TYPE or
SET EXPRESSION AS when used on virtual generated columns. This commit also
updates the documentation to clarify that ANALYZE is unnecessary in such cases.
Back-patch the ANALYZE recommendation for SET EXPRESSION AS to v17
where the feature was introduced, and the note about virtual generated
columns to v18 where those columns were added.
Author: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/20250804151418.0cf365bd2855d606763443fe@sraoss.co.jp
Backpatch-through: 17
The result of "DirectFunctionCall1(numeric_float8, d)" is already in
Datum form, but the code was incorrectly applying PG_RETURN_FLOAT8()
to it. On machines where float8 is pass-by-reference, this would
result in complete garbage, since an unpredictable pointer value
would be treated as an integer and then converted to float. It's not
entirely clear how much of a problem would ensue on 64-bit hardware,
but certainly interpreting a float8 bitpattern as uint64 and then
converting that to float isn't the intended behavior.
As luck would have it, even the complete-garbage case doesn't break
BRIN indexes, since the results are only used to make choices about
how to merge values into ranges: at worst, we'd make poor choices
resulting in an inefficient index. Doubtless that explains the lack
of field complaints. However, users with BRIN indexes that use the
numeric_minmax_multi_ops opclass may wish to reindex in hopes of
making their indexes more efficient.
Author: Peter Eisentraut <peter@eisentraut.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2093712.1753983215@sss.pgh.pa.us
Backpatch-through: 14
During CREATE DATABASE, if changing the locale provider, require that
a new locale is specified rather than trying to reinterpret the
template's locale using the new provider.
This only affects the behavior when the template uses the builtin
provider and CREATE DATABASE specifies the ICU provider without
specifying the locale. Previously, that may have succeeded due to
loose validation by ICU, whereas now that will cause an error. Because
it can cause an error, backport only to unreleased versions.
Discussion: https://postgr.es/m/5038b33a6dc639009f4b3d43fa6ae0c5ba9e04f7.camel@j-davis.com
Backpatch-through: 18
Previously, specifying the publication option 'publish_generated_columns'
without an explicit value would incorrectly default to 'stored', which is
not the intended behavior.
This patch fixes the issue by raising an ERROR when no value is provided
for 'publish_generated_columns', ensuring that users must explicitly
specify a valid option.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Backpatch-through: 18, where it was introduced
Discussion: https://postgr.es/m/CAHut+PsCUCWiEKmB10DxhoPfXbF6jw5RD9ib2LuaQeA_XraW7w@mail.gmail.com
Previously, enabling sync_replication_slots while wal_level was not set
to logical could cause the server to shut down. This was because
the postmaster performed a configuration check before launching
the slot synchronization worker and raised an ERROR if the settings
were incompatible. Since ERROR is treated as FATAL in the postmaster,
this resulted in the entire server shutting down unexpectedly.
This commit changes the postmaster to log that message with a LOG-level
instead of raising an ERROR, allowing the server to continue running
even with the misconfiguration.
Back-patch to v17, where slot synchronization was introduced.
Reported-by: Hugo DUBOIS <hdubois@scaleway.com>
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Hugo DUBOIS <hdubois@scaleway.com>
Reviewed-by: Shveta Malik <shveta.malik@gmail.com>
Discussion: https://postgr.es/m/CAH0PTU_pc3oHi__XESF9ZigCyzai1Mo3LsOdFyQA4aUDkm01RA@mail.gmail.com
Backpatch-through: 17
It's possible to use a CHECK (col IS NOT NULL) constraint to skip
scanning a table for nulls when adding a NOT NULL constraint on the same
column. However, if the CHECK constraint is dropped on the same command
that the NOT NULL is added, this fails, i.e., makes the NOT NULL addition
slow. The best we can do about it at this stage is to document this so
that users aren't taken by surprise.
(In Postgres 18 you can directly add the NOT NULL constraint as NOT
VALID instead, so there's no longer much use for the CHECK constraint,
therefore no point in building mechanism to support the case better.)
Reported-by: Andrew <psy2000usa@yahoo.com>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/175385113607.786.16774570234342968908@wrigleys.postgresql.org
Previously, when running pgbench in pipeline mode with a custom script
that triggered retriable errors (e.g., serialization errors),
an assertion failure could occur:
Assertion failed: (res == ((void*)0)), function discardUntilSync, file pgbench.c, line 3515.
The root cause was that pgbench incorrectly assumed only a single
pipeline sync message would be received at the end. In reality,
multiple pipeline sync messages can be sent and must be handled properly.
This commit fixes the issue by updating pgbench to correctly process
multiple pipeline sync messages, preventing the assertion failure.
Back-patch to v15, where the bug was introduced.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/CAHGQGwFAX56Tfx+1ppo431OSWiLLuW72HaGzZ39NkLkop6bMzQ@mail.gmail.com
Backpatch-through: 15
In ReorderBufferProcessTXN(), used to send the data of a transaction to
an output plugin, INSERT ON CONFLICT changes (INTERNAL_SPEC_INSERT) are
delayed until a confirmation record arrives (INTERNAL_SPEC_CONFIRM),
updating the change being processed.
8c58624df4 has added an extra step after processing a change to update
the progress of the transaction, by calling the callback
update_progress_txn() based on the LSN stored in a change after a
threshold of CHANGES_THRESHOLD (100) is reached. This logic has missed
the fact that for an INSERT ON CONFLICT change the data is freed once
processed, hence update_progress_txn() could be called pointing to a LSN
value that's already been freed. This could result in random crashes,
depending on the workload.
Per discussion, this issue is fixed by reusing in update_progress_txn()
the LSN from the change processed found at the beginning of the loop,
meaning that for a INTERNAL_SPEC_CONFIRM change the progress is updated
using the LSN of the INTERNAL_SPEC_CONFIRM change, and not the LSN from
its INTERNAL_SPEC_INSERT change. This is actually more correct, as we
want to update the progress to point to the INTERNAL_SPEC_CONFIRM
change.
Masahiko Sawada has found a nice trick to reproduce the issue: hardcode
CHANGES_THRESHOLD at 1 and run test_decoding (test "ddl" being enough)
on an instance running valgrind. The bug has been analyzed by Ethan
Mertz, who also originally suggested the solution used in this patch.
Issue introduced by 8c58624df4, so backpatch down to v16.
Author: Ethan Mertz <ethan.mertz@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aIsQqDZ7x4LAQ6u1@paquier.xyz
Backpatch-through: 16
Currently, ALTER DATABASE/ROLE/SYSTEM RESET [ALL] with an unknown
custom GUC with a prefix reserved by MarkGUCPrefixReserved() errors
(unless a superuser runs a RESET ALL variant). This is problematic
for cases such as an extension library upgrade that removes a GUC.
To fix, simply make sure the relevant code paths explicitly allow
it. Note that we require superuser or privileges on the parameter
to reset it. This is perhaps a bit more restrictive than is
necessary, but it's not clear whether further relaxing the
requirements is safe.
Oversight in commit 88103567cb. The ALTER SYSTEM fix is dependent
on commit 2d870b4aef, which first appeared in v17. Unfortunately,
back-patching that commit would introduce ABI breakage, and while
that breakage seems unlikely to bother anyone, it doesn't seem
worth the risk. Hence, the ALTER SYSTEM part of this commit is
omitted on v15 and v16.
Reported-by: Mert Alev <mert@futo.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/18964-ba09dea8c98fccd6%40postgresql.org
Backpatch-through: 15
PostgreSQL always sends the BackendKeyData message at connection
startup, but there are some third party backend implementations out
there that don't support cancellation, and don't send the message
[1]. While the protocol docs left it up for interpretation if that is
valid behavior, libpq in PostgreSQL 17 and below accepted it. It does
not seem like the libpq behavior was intentional though, since it did
so by sending CancelRequest messages with all zeros to such servers
(instead of returning an error or making the cancel a no-op).
In version 18 the behavior was changed to return an error when trying
to create the cancel object with PGgetCancel() or PGcancelCreate().
This was done without any discussion, as part of supporting different
lengths of cancel packets for the new 3.2 version of the protocol.
This commit changes the behavior of PGgetCancel() / PGcancel() once
more to only return an error when the cancel object is actually used
to send a cancellation, instead of when merely creating the object.
The reason to do so is that some clients [2] create a cancel object as
part of their connection creation logic (thus having the cancel object
ready for later when they need it), so if creating the cancel object
returns an error, the whole connection attempt fails. By delaying the
error, such clients will still be able to connect to the third party
backend implementations in question, but when actually trying to
cancel a query, the user will be notified that that is not possible
for the server that they are connected to.
This commit only changes the behavior of the older PGgetCancel() /
PQcancel() functions, not the more modern PQcancelCreate() family of
functions. I.e. PQcancelCreate() returns a failed connection object
(CONNECTION_BAD) if the server didn't send a cancellation key. Unlike
the old PQgetCancel() function, we're not aware of any clients in the
field that use PQcancelCreate() during connection startup in a way
that would prevent connecting to such servers.
[1] AWS RDS Proxy is definitely one of them, and CockroachDB might be
another.
[2] psycopg2 (but not psycopg3).
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Backpatch-through: 18
Discussion: https://www.postgresql.org/message-id/20250617.101056.1437027795118961504.ishii%40postgresql.org
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
Commit c407d5426b added tab completion for ALTER ROLE|USER ... RESET,
with the intent to offer only the variables actually set on the role.
But as soon as the user started typing something, it would start to
offer all possible matching variables.
Fix this the same way ALTER DATABASE ... RESET does it, i.e. by
properly considering the prefix.
A second issue causing similar symptoms (offering variables that are not
actually set for a role) was caused by a match to another pattern. The
ALTER DATABASE ... RESET was already excluded, so do the same thing for
ROLE/USER.
Report and fix by Dagfinn Ilmari Mannsåker. Backpatch to 18, same as
c407d5426b.
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/87qzyghw2x.fsf%40wibble.ilmari.org
Discussion: https://postgr.es/m/87tt4lumqz.fsf%40wibble.ilmari.org
Backpatch-through: 18
pg_dump sorts objects by their logical names, e.g. (nspname, relname,
tgname), before dependency-driven reordering. That removes one source
of logically-identical databases differing in their schema-only dumps.
In other words, it helps with schema diffing. The logical name sort
ignored essential sort keys for constraints, operators, PUBLICATION
... FOR TABLE, PUBLICATION ... FOR TABLES IN SCHEMA, operator classes,
and operator families. pg_dump's sort then depended on object OID,
yielding spurious schema diffs. After this change, OIDs affect dump
order only in the event of catalog corruption. While pg_dump also
wrongly ignored pg_collation.collencoding, CREATE COLLATION restrictions
have been keeping that imperceptible in practical use.
Use techniques like we use for object types already having full sort key
coverage. Where the pertinent queries weren't fetching the ignored sort
keys, this adds columns to those queries and stores those keys in memory
for the long term.
The ignorance of sort keys became more problematic when commit
172259afb5 added a schema diff test
sensitive to it. Buildfarm member hippopotamus witnessed that.
However, dump order stability isn't a new goal, and this might avoid
other dump comparison failures. Hence, back-patch to v13 (all supported
versions).
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/20250707192654.9e.nmisch@google.com
Backpatch-through: 13
Recent discussions of the mechanisms used to manage global data have
raised concerns about their robustness and security. Rather than try
to deal with those concerns at a very late stage of the release cycle,
the conclusion is to revert these features and work on them for the
next release.
This reverts parts or all of the following commits:
1495eff7bd Non text modes for pg_dumpall, correspondingly change pg_restore
5db3bf7391 Clean up from commit 1495eff7bd289f74d0cb Add more TAP tests for pg_dumpall
2ef5790806 Fix a couple of error messages and tests for them
b52a4a5f28 Clean up error messages from 1495eff7bd4170298b6e Further cleanup for directory creation on pg_dump/pg_dumpall
22cb6d2895 Fix memory leak in pg_restore.c
928394b664 Improve various new-to-v18 appendStringInfo calls
39729ec01d Fix fat fingering in 22cb6d28955822bf21d5 Add missing space in pg_restore documentation.
f09088a01d Free memory properly in pg_restore.c
40b9c27014 pg_restore cleanups
4aad2cb770 Portability fix: isdigit() must be passed an unsigned char.
88e947136b Fix typos and grammar in the code
f60420cff6 doc: Alphabetize long options for pg_dump[all].
bc35adee8d doc: Put new options in consistent order on man pages
a876464abc Message style improvements
dec6643487 Improve pg_dump/pg_dumpall help synopses and terminology
0ebd242555 Run pgperltidy
Discussion: https://postgr.es/m/20250708212819.09.nmisch@google.com
Backpatch-to: 18
Reviewed-by: Noah Misch <noah@leadboat.com>
The configure checks used two incorrect functions when checking the
presence of some routines in an environment:
- __get_cpuidex() for the check of __cpuidex().
- __get_cpuid() for the check of __cpuid().
This means that Postgres has never been able to detect the presence of
these functions, impacting environments where these exist, like Windows.
Simply fixing the function name does not work. For example, using
configure with MinGW on Windows causes the checks to detect all four of
__get_cpuid(), __get_cpuid_count(), __cpuidex() and __cpuid() to be
available, causing a compilation failure as this messes up with the
MinGW headers as we would include both <intrin.h> and <cpuid.h>.
The Postgres code expects only one in { __get_cpuid() , __cpuid() } and
one in { __get_cpuid_count() , __cpuidex() } to exist. This commit
reshapes the configure checks to do exactly what meson is doing, which
has been working well for us: check one, then the other, but never allow
both to be detected in a given build.
The logic is wrong since 3dc2d62d04 and 792752af4e where these
checks have been introduced (the second case is most likely a copy-pasto
coming from the first case), with meson documenting that the configure
checks were broken. As far as I can see, they are not once applied
consistently with what the code expects, but let's see if the buildfarm
has different something to say. The comment in meson.build is adjusted
as well, to reflect the new reality.
Author: Lukas Fittl <lukas@fittl.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aIgwNYGVt5aRAqTJ@paquier.xyz
Backpatch-through: 13
If the client sent a query cancel request with backend PID 0, it
tripped an assertion. With assertions disabled, you got this in the
log instead:
LOG: invalid cancel request with PID 0
LOG: wrong key in cancel request for process 0
Query cancellations don't even require authentication, so we better
tolerate bogus requests. Fix by turning the assertion into a regular
runtime check.
Spotted while testing libpq behavior with a modified server that
didn't send BackendKeyData to the client.
Backpatch-through: 18
For many optional libraries, we extract the -L and -l switches needed
to link the library from a helper program such as llvm-config. In
some cases we put the resulting -L switches into LDFLAGS ahead of
-L switches specified via --with-libraries. That risks breaking
the user's intention for --with-libraries.
It's not such a problem if the library's -L switch points to a
directory containing only that library, but on some platforms a
library helper may "helpfully" offer a switch such as -L/usr/lib
that points to a directory holding all standard libraries. If the
user specified --with-libraries in hopes of overriding the standard
build of some library, the -L/usr/lib switch prevents that from
happening since it will come before the user-specified directory.
To fix, avoid inserting these switches directly into LDFLAGS during
configure, instead adding them to LIBDIRS or SHLIB_LINK. They will
still eventually get added to LDFLAGS, but only after the switches
coming from --with-libraries.
The same problem exists for -I switches: those coming from
--with-includes should appear before any coming from helper programs
such as llvm-config. We have not heard field complaints about this
case, but it seems certain that a user attempting to override a
standard library could have issues.
The changes for this go well beyond configure itself, however,
because many Makefiles have occasion to manipulate CPPFLAGS to
insert locally-desirable -I switches, and some of them got it wrong.
The correct ordering is any -I switches pointing at within-the-
source-tree-or-build-tree directories, then those from the tree-wide
CPPFLAGS, then those from helper programs. There were several places
that risked pulling in a system-supplied copy of libpq headers, for
example, instead of the in-tree files. (Commit cb36f8ec2 fixed one
instance of that a few months ago, but this exercise found more.)
The Meson build scripts may or may not have any comparable problems,
but I'll leave it to someone else to investigate that.
Reported-by: Charles Samborski <demurgos@demurgos.net>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/70f2155f-27ca-4534-b33d-7750e20633d7@demurgos.net
Backpatch-through: 13
When I prepared 71c0921b6 et al yesterday, I was thinking that the
logic involving explicitly freeing the node_list output was still
needed to dodge leakage bugs in libxml2. But I was misremembering:
we introduced that only because with early 2.13.x releases we could
not trust xmlParseBalancedChunkMemory's result code, so we had to
look to see if a node list was returned or not. There's no reason
to believe that xmlParseBalancedChunkMemory will fail to clean up
the node list when required, so simplify. (This essentially
completes reverting all the non-cosmetic changes in 6082b3d5d.)
Reported-by: Jim Jones <jim.jones@uni-muenster.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/997668.1753802857@sss.pgh.pa.us
Backpatch-through: 13
This mostly reverts commit 6082b3d5d, "Use xmlParseInNodeContext
not xmlParseBalancedChunkMemory". It turns out that
xmlParseInNodeContext will reject text chunks exceeding 10MB, while
(in most libxml2 versions) xmlParseBalancedChunkMemory will not.
The bleeding-edge libxml2 bug that we needed to work around a year
ago is presumably no longer a factor, and the argument that
xmlParseBalancedChunkMemory is semi-deprecated is not enough to
justify a functionality regression. Hence, go back to doing it
the old way.
Reported-by: Michael Paquier <michael@paquier.xyz>
Author: Michael Paquier <michael@paquier.xyz>
Co-authored-by: Erik Wienhold <ewie@ewie.name>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aIGknLuc8b8ega2X@paquier.xyz
Backpatch-through: 13
Commit 473a575e05 purported to make this
function stash the error message in *syncrep_parse_result_p, but
it didn't actually.
As a result, an attempt to set synchronous_standby_names to any value
that does not parse resulted in a generic "parser failed." message
rather than anything more specific. This fixes that.
Discussion: http://postgr.es/m/CA+TgmoYF9wPNZ-Q_EMfib_espgHycY-eX__6Tzo2GpYpVXqCdQ@mail.gmail.com
Backpatch-through: 18
The callback added in fc415edf8c used to check if there is any pending
data to flush for fixed-numbered statistics, done by looping across all
the builtin and custom stats kinds with a call to have_fixed_pending_cb,
is proving to able to show in workloads that do not report any stats
(read-only, no function calls, no WAL, no IO, etc). The code used in
v17 was cheaper than that what HEAD has introduced, relying on three
boolean checks for WAL, SLRU and IO stats.
This commit switches the code to use a more efficient approach than
fc415edf8c, with a single boolean flag that can be switched to "true"
by any fixed-numbered stats kinds to force pgstat_report_stat() to go
through one round of reports. The flag is reset by pgstat_report_stat()
once a full round of reports is done. The flag being false means that
fixed-numbered stats kinds saw no activity, and that there is no pending
data to flush.
ac000fca74 took one step in improving the performance by reducing the
number of stats kinds that the backend can hold. This commit takes a
more drastic step by bringing back the code efficiency to what it was
before v18 with a cheap check at the beginning of pgstat_report_stat()
for its fast-exit path.
The callback have_static_pending_cb is removed as an effect of all that.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/eb224uegsga2hgq7dfq3ps5cduhpqej7ir2hjxzzozjthrekx5@dysei6buqthe
Backpatch-through: 18
If the number of sync requests is big enough, the palloc() call in
AbsorbSyncRequests() will attempt to allocate more than 1 GB of memory,
resulting in failure. This can lead to an infinite loop in the checkpointer
process, as it repeatedly fails to absorb the pending requests.
This commit limits the checkpointer requests queue size to 10M items. In
addition to preventing the palloc() failure, this change helps to avoid long
queue processing time.
Also, this commit is for backpathing only. The master branch receives
a more invasive yet comprehensive fix for this problem.
Discussion: https://postgr.es/m/db4534f83a22a29ab5ee2566ad86ca92%40postgrespro.ru
Backpatch-through: 13
Previously, if a background worker crashed (e.g., due to a SIGKILL) and
the server restarted due to restart_after_crash being enabled,
the worker was not restarted as expected. Background workers without
the never-restart flag should automatically restart in this case.
This issue was introduced in commit 28a520c0b7, which failed to reset
the rw_pid field in the RegisteredBgWorker struct for the crashed worker.
This commit fixes the problem by resetting rw_pid for all eligible
background workers during the crash-and-restart cycle.
Back-patched to v18, where the bug was introduced.
Bug fix patches were proposed by Andrey Rudometov and ChangAo Chen,
but this commit uses a different approach.
Reported-by: Andrey Rudometov <unlimitedhikari@gmail.com>
Reported-by: ChangAo Chen <cca5507@qq.com>
Author: Andrey Rudometov <unlimitedhikari@gmail.com>
Author: ChangAo Chen <cca5507@qq.com>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: ChangAo Chen <cca5507@qq.com>
Reviewed-by: Shveta Malik <shveta.malik@gmail.com>
Discussion: https://postgr.es/m/CAF6JsWiO=i24qYitWe6ns1sXqcL86rYxdyU+pNYk-WueKPSySg@mail.gmail.com
Discussion: https://postgr.es/m/tencent_E00A056B3953EE6440F0F40F80EC30427D09@qq.com
Backpatch-through: 18
LatchWaitSetPostmasterDeathPos, the latch event position for the
postmaster death event, is initialized under IsUnderPostmaster.
WaitLatch() considered it as a valid wait target in single-user mode
(!IsUnderPostmaster), which was incorrect.
One code path found to fail with an assertion failure is a database drop
in single-user mode while waiting in WaitForProcSignalBarrier() after
the drop.
Oversight in commit 84e5b2f07a.
Author: Patrick Stählin <me@packi.ch>
Co-authored-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Discussion: https://postgr.es/m/18996-3a2744c8140488de@postgresql.org
Backpatch-through: 18
This commit changes stats kinds to have the following bounds, making
their handling in core cheaper by default:
- PGSTAT_KIND_CUSTOM_MIN 128 -> 24
- PGSTAT_KIND_MAX 256 -> 32
The original numbers were rather high, and showed an impact on
performance in pgstat_report_stat() for the case of simple queries with
its early-exit path if there are no pending statistics to flush. This
logic will be improved more in a follow-up commit to bring the
performance of pgstat_report_stat() on par with v17 and older versions.
Lowering the bounds is a change worth doing on its own, independently of
the other improvement.
These new numbers should be enough to leave some room for the following
years for built-in and custom stats kinds, with stable ID numbers. At
least that should be enough to start with this facility for extension
developers. It can be always increased in the tree depending on the
requirements wanted.
Per discussion with Andres Freund and Bertrand Drouvot.
Discussion: https://postgr.es/m/eb224uegsga2hgq7dfq3ps5cduhpqej7ir2hjxzzozjthrekx5@dysei6buqthe
Backpatch-through: 18
Previously, the tool could replay the same transaction twice, once during
recovery, then again during replication after the subscriber was set up.
This occurred because the same recovery_target_lsn was used both to
finalize recovery and to start replication. If
recovery_target_inclusive = true, the transaction at that LSN would be
applied during recovery and then sent again by the publisher leading to
duplication.
To prevent this, we now set recovery_target_inclusive = false. This
ensures the transaction at recovery_target_lsn is not reapplied during
recovery, avoiding duplication when replication begins.
Bug #18897
Reported-by: Zane Duffield <duffieldzane@gmail.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/18897-d3db67535860dddb@postgresql.org
This commit adds missing index entries for the functions pg_buffercache_numa()
and pg_buffercache_usage_counts() in the pg_buffercache documentation.
It also makes the function titles consistent by adding parentheses after
function names where they were previously missing.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/7d19af4b-7da3-4862-9f52-ff958960bd8d@oss.nttdata.com
Backpatch-through: 18
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
ECPGconnect() caches established connections to the server, supporting
the case of a NULL connection name when a database name is not specified
by its caller.
A follow-up call to ECPGget_PGconn() to get an established connection
from the cached set with a non-NULL name could cause a NULL pointer
dereference if a NULL connection was listed in the cache and checked for
a match. At least two connections are necessary to reproduce the issue:
one with a NULL name and one with a non-NULL name.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Discussion: https://postgr.es/m/CAJ7c6TNvFTPUTZQuNAoqgzaSGz-iM4XR61D7vEj5PsQXwg2RyA@mail.gmail.com
Backpatch-through: 13
When pg_recvlogical receives a SIGHUP signal, it closes the current
output file and reopens a new one. This is useful since it allows us to
rotate the output file by renaming the current file and sending a SIGHUP.
This behavior was previously undocumented. This commit adds
the missing documentation.
Back-patch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/0977fc4f-1523-4ecd-8a0e-391af4976367@oss.nttdata.com
Backpatch-through: 13
This commit is only for HEAD and v18, where the test has been removed.
It also incorporates improvements below to stability and coverage of the
original test, which were already backpatched to v17.
- Add one pg_logical_emit_message() call to force the creation of a record
that spawns across two pages.
- Make the logic wait for the checkpoint completion.
Author: Alexander Korotkov <akorotkov@postgresql.org>
Co-authored-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Backpatch-through: 18
