Expand usage of macros for protocol characters.

This commit makes use of the existing PqMsg_* macros in more places
and adds new PqReplMsg_* and PqBackupMsg_* macros for use in
special replication and backup messages, respectively.

Author: Dave Cramer <davecramer@gmail.com>
Co-authored-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/aIECfYfevCUpenBT@nathan
Discussion: https://postgr.es/m/CAFcNs%2Br73NOUb7%2BqKrV4HHEki02CS96Z%2Bx19WaFgE087BWwEng%40mail.gmail.com

src/backend/backup/basebackup_copy.c

@@ -143,7 +143,7 @@ bbsink_copystream_begin_backup(bbsink *sink)
 	buf = palloc(mysink->base.bbs_buffer_length + MAXIMUM_ALIGNOF);
 	mysink->msgbuffer = buf + (MAXIMUM_ALIGNOF - 1);
 	mysink->base.bbs_buffer = buf + MAXIMUM_ALIGNOF;
-	mysink->msgbuffer[0] = 'd'; /* archive or manifest data */
+	mysink->msgbuffer[0] = PqMsg_CopyData;	/* archive or manifest data */
 
 	/* Tell client the backup start location. */
 	SendXlogRecPtrResult(state->startptr, state->starttli);
@@ -170,7 +170,7 @@ bbsink_copystream_begin_archive(bbsink *sink, const char *archive_name)
 
 	ti = list_nth(state->tablespaces, state->tablespace_num);
 	pq_beginmessage(&buf, PqMsg_CopyData);
-	pq_sendbyte(&buf, 'n');		/* New archive */
+	pq_sendbyte(&buf, PqBackupMsg_NewArchive);
 	pq_sendstring(&buf, archive_name);
 	pq_sendstring(&buf, ti->path == NULL ? "" : ti->path);
 	pq_endmessage(&buf);
@@ -191,7 +191,7 @@ bbsink_copystream_archive_contents(bbsink *sink, size_t len)
 	if (mysink->send_to_client)
 	{
 		/* Add one because we're also sending a leading type byte. */
-		pq_putmessage('d', mysink->msgbuffer, len + 1);
+		pq_putmessage(PqMsg_CopyData, mysink->msgbuffer, len + 1);
 	}
 
 	/* Consider whether to send a progress report to the client. */
@@ -221,7 +221,7 @@ bbsink_copystream_archive_contents(bbsink *sink, size_t len)
 			mysink->last_progress_report_time = now;
 
 			pq_beginmessage(&buf, PqMsg_CopyData);
-			pq_sendbyte(&buf, 'p'); /* Progress report */
+			pq_sendbyte(&buf, PqBackupMsg_ProgressReport);
 			pq_sendint64(&buf, state->bytes_done);
 			pq_endmessage(&buf);
 			pq_flush_if_writable();
@@ -247,7 +247,7 @@ bbsink_copystream_end_archive(bbsink *sink)
 	mysink->bytes_done_at_last_time_check = state->bytes_done;
 	mysink->last_progress_report_time = GetCurrentTimestamp();
 	pq_beginmessage(&buf, PqMsg_CopyData);
-	pq_sendbyte(&buf, 'p');		/* Progress report */
+	pq_sendbyte(&buf, PqBackupMsg_ProgressReport);
 	pq_sendint64(&buf, state->bytes_done);
 	pq_endmessage(&buf);
 	pq_flush_if_writable();
@@ -262,7 +262,7 @@ bbsink_copystream_begin_manifest(bbsink *sink)
 	StringInfoData buf;
 
 	pq_beginmessage(&buf, PqMsg_CopyData);
-	pq_sendbyte(&buf, 'm');		/* Manifest */
+	pq_sendbyte(&buf, PqBackupMsg_Manifest);
 	pq_endmessage(&buf);
 }
 
@@ -277,7 +277,7 @@ bbsink_copystream_manifest_contents(bbsink *sink, size_t len)
 	if (mysink->send_to_client)
 	{
 		/* Add one because we're also sending a leading type byte. */
-		pq_putmessage('d', mysink->msgbuffer, len + 1);
+		pq_putmessage(PqMsg_CopyData, mysink->msgbuffer, len + 1);
 	}
 }
 

src/backend/replication/logical/applyparallelworker.c

@@ -778,10 +778,10 @@ LogicalParallelApplyLoop(shm_mq_handle *mqh)
 
 			/*
 			 * The first byte of messages sent from leader apply worker to
-			 * parallel apply workers can only be 'w'.
+			 * parallel apply workers can only be PqReplMsg_WALData.
 			 */
 			c = pq_getmsgbyte(&s);
-			if (c != 'w')
+			if (c != PqReplMsg_WALData)
 				elog(ERROR, "unexpected message \"%c\"", c);
 
 			/*

src/backend/replication/logical/worker.c

@@ -3994,7 +3994,7 @@ LogicalRepApplyLoop(XLogRecPtr last_received)
 
 					c = pq_getmsgbyte(&s);
 
-					if (c == 'w')
+					if (c == PqReplMsg_WALData)
 					{
 						XLogRecPtr	start_lsn;
 						XLogRecPtr	end_lsn;
@@ -4016,7 +4016,7 @@ LogicalRepApplyLoop(XLogRecPtr last_received)
 
 						maybe_advance_nonremovable_xid(&rdt_data, false);
 					}
-					else if (c == 'k')
+					else if (c == PqReplMsg_Keepalive)
 					{
 						XLogRecPtr	end_lsn;
 						TimestampTz timestamp;
@@ -4035,7 +4035,7 @@ LogicalRepApplyLoop(XLogRecPtr last_received)
 
 						UpdateWorkerStats(last_received, timestamp, true);
 					}
-					else if (c == 's')	/* Primary status update */
+					else if (c == PqReplMsg_PrimaryStatusUpdate)
 					{
 						rdt_data.remote_lsn = pq_getmsgint64(&s);
 						rdt_data.remote_oldestxid = FullTransactionIdFromU64((uint64) pq_getmsgint64(&s));
@@ -4267,7 +4267,7 @@ send_feedback(XLogRecPtr recvpos, bool force, bool requestReply)
 	else
 		resetStringInfo(reply_message);
 
-	pq_sendbyte(reply_message, 'r');
+	pq_sendbyte(reply_message, PqReplMsg_StandbyStatusUpdate);
 	pq_sendint64(reply_message, recvpos);	/* write */
 	pq_sendint64(reply_message, flushpos);	/* flush */
 	pq_sendint64(reply_message, writepos);	/* apply */
@@ -4438,7 +4438,7 @@ request_publisher_status(RetainDeadTuplesData *rdt_data)
 	 * Send the current time to update the remote walsender's latest reply
 	 * message received time.
 	 */
-	pq_sendbyte(request_message, 'p');
+	pq_sendbyte(request_message, PqReplMsg_PrimaryStatusRequest);
 	pq_sendint64(request_message, GetCurrentTimestamp());
 
 	elog(DEBUG2, "sending publisher status request message");

src/backend/replication/walreceiver.c

@@ -826,7 +826,7 @@ XLogWalRcvProcessMsg(unsigned char type, char *buf, Size len, TimeLineID tli)
 
 	switch (type)
 	{
-		case 'w':				/* WAL records */
+		case PqReplMsg_WALData:
 			{
 				StringInfoData incoming_message;
 
@@ -850,7 +850,7 @@ XLogWalRcvProcessMsg(unsigned char type, char *buf, Size len, TimeLineID tli)
 				XLogWalRcvWrite(buf, len, dataStart, tli);
 				break;
 			}
-		case 'k':				/* Keepalive */
+		case PqReplMsg_Keepalive:
 			{
 				StringInfoData incoming_message;
 
@@ -1130,7 +1130,7 @@ XLogWalRcvSendReply(bool force, bool requestReply)
 	applyPtr = GetXLogReplayRecPtr(NULL);
 
 	resetStringInfo(&reply_message);
-	pq_sendbyte(&reply_message, 'r');
+	pq_sendbyte(&reply_message, PqReplMsg_StandbyStatusUpdate);
 	pq_sendint64(&reply_message, writePtr);
 	pq_sendint64(&reply_message, flushPtr);
 	pq_sendint64(&reply_message, applyPtr);
@@ -1234,7 +1234,7 @@ XLogWalRcvSendHSFeedback(bool immed)
 
 	/* Construct the message and send it. */
 	resetStringInfo(&reply_message);
-	pq_sendbyte(&reply_message, 'h');
+	pq_sendbyte(&reply_message, PqReplMsg_HotStandbyFeedback);
 	pq_sendint64(&reply_message, GetCurrentTimestamp());
 	pq_sendint32(&reply_message, xmin);
 	pq_sendint32(&reply_message, xmin_epoch);

src/backend/replication/walsender.c

@@ -1534,7 +1534,7 @@ WalSndPrepareWrite(LogicalDecodingContext *ctx, XLogRecPtr lsn, TransactionId xi
 
 	resetStringInfo(ctx->out);
 
-	pq_sendbyte(ctx->out, 'w');
+	pq_sendbyte(ctx->out, PqReplMsg_WALData);
 	pq_sendint64(ctx->out, lsn);	/* dataStart */
 	pq_sendint64(ctx->out, lsn);	/* walEnd */
 
@@ -2292,7 +2292,8 @@ ProcessRepliesIfAny(void)
 		switch (firstchar)
 		{
 				/*
-				 * 'd' means a standby reply wrapped in a CopyData packet.
+				 * PqMsg_CopyData means a standby reply wrapped in a CopyData
+				 * packet.
 				 */
 			case PqMsg_CopyData:
 				ProcessStandbyMessage();
@@ -2300,8 +2301,9 @@ ProcessRepliesIfAny(void)
 				break;
 
 				/*
-				 * CopyDone means the standby requested to finish streaming.
-				 * Reply with CopyDone, if we had not sent that already.
+				 * PqMsg_CopyDone means the standby requested to finish
+				 * streaming.  Reply with CopyDone, if we had not sent that
+				 * already.
 				 */
 			case PqMsg_CopyDone:
 				if (!streamingDoneSending)
@@ -2315,7 +2317,8 @@ ProcessRepliesIfAny(void)
 				break;
 
 				/*
-				 * 'X' means that the standby is closing down the socket.
+				 * PqMsg_Terminate means that the standby is closing down the
+				 * socket.
 				 */
 			case PqMsg_Terminate:
 				proc_exit(0);
@@ -2350,15 +2353,15 @@ ProcessStandbyMessage(void)
 
 	switch (msgtype)
 	{
-		case 'r':
+		case PqReplMsg_StandbyStatusUpdate:
 			ProcessStandbyReplyMessage();
 			break;
 
-		case 'h':
+		case PqReplMsg_HotStandbyFeedback:
 			ProcessStandbyHSFeedbackMessage();
 			break;
 
-		case 'p':
+		case PqReplMsg_PrimaryStatusRequest:
 			ProcessStandbyPSRequestMessage();
 			break;
 
@@ -2752,7 +2755,7 @@ ProcessStandbyPSRequestMessage(void)
 
 	/* construct the message... */
 	resetStringInfo(&output_message);
-	pq_sendbyte(&output_message, 's');
+	pq_sendbyte(&output_message, PqReplMsg_PrimaryStatusUpdate);
 	pq_sendint64(&output_message, lsn);
 	pq_sendint64(&output_message, (int64) U64FromFullTransactionId(fullOldestXidInCommit));
 	pq_sendint64(&output_message, (int64) U64FromFullTransactionId(nextFullXid));
@@ -3364,7 +3367,7 @@ XLogSendPhysical(void)
 	 * OK to read and send the slice.
 	 */
 	resetStringInfo(&output_message);
-	pq_sendbyte(&output_message, 'w');
+	pq_sendbyte(&output_message, PqReplMsg_WALData);
 
 	pq_sendint64(&output_message, startptr);	/* dataStart */
 	pq_sendint64(&output_message, SendRqstPtr); /* walEnd */
@@ -4135,7 +4138,7 @@ WalSndKeepalive(bool requestReply, XLogRecPtr writePtr)
 
 	/* construct the message... */
 	resetStringInfo(&output_message);
-	pq_sendbyte(&output_message, 'k');
+	pq_sendbyte(&output_message, PqReplMsg_Keepalive);
 	pq_sendint64(&output_message, XLogRecPtrIsInvalid(writePtr) ? sentPtr : writePtr);
 	pq_sendint64(&output_message, GetCurrentTimestamp());
 	pq_sendbyte(&output_message, requestReply ? 1 : 0);

src/bin/pg_basebackup/pg_basebackup.c

@@ -35,6 +35,7 @@
 #include "fe_utils/option_utils.h"
 #include "fe_utils/recovery_gen.h"
 #include "getopt_long.h"
+#include "libpq/protocol.h"
 #include "receivelog.h"
 #include "streamutil.h"
 
@@ -1338,7 +1339,7 @@ ReceiveArchiveStreamChunk(size_t r, char *copybuf, void *callback_data)
 	/* Each CopyData message begins with a type byte. */
 	switch (GetCopyDataByte(r, copybuf, &cursor))
 	{
-		case 'n':
+		case PqBackupMsg_NewArchive:
 			{
 				/* New archive. */
 				char	   *archive_name;
@@ -1410,7 +1411,7 @@ ReceiveArchiveStreamChunk(size_t r, char *copybuf, void *callback_data)
 				break;
 			}
 
-		case 'd':
+		case PqMsg_CopyData:
 			{
 				/* Archive or manifest data. */
 				if (state->manifest_buffer != NULL)
@@ -1446,7 +1447,7 @@ ReceiveArchiveStreamChunk(size_t r, char *copybuf, void *callback_data)
 				break;
 			}
 
-		case 'p':
+		case PqBackupMsg_ProgressReport:
 			{
 				/*
 				 * Progress report.
@@ -1465,7 +1466,7 @@ ReceiveArchiveStreamChunk(size_t r, char *copybuf, void *callback_data)
 				break;
 			}
 
-		case 'm':
+		case PqBackupMsg_Manifest:
 			{
 				/*
 				 * Manifest data will be sent next. This message is not

src/bin/pg_basebackup/pg_recvlogical.c

@@ -24,6 +24,7 @@
 #include "getopt_long.h"
 #include "libpq-fe.h"
 #include "libpq/pqsignal.h"
+#include "libpq/protocol.h"
 #include "pqexpbuffer.h"
 #include "streamutil.h"
 
@@ -149,7 +150,7 @@ sendFeedback(PGconn *conn, TimestampTz now, bool force, bool replyRequested)
 					LSN_FORMAT_ARGS(output_fsync_lsn),
 					replication_slot);
 
-	replybuf[len] = 'r';
+	replybuf[len] = PqReplMsg_StandbyStatusUpdate;
 	len += 1;
 	fe_sendint64(output_written_lsn, &replybuf[len]);	/* write */
 	len += 8;
@@ -454,7 +455,7 @@ StreamLogicalLog(void)
 		}
 
 		/* Check the message type. */
-		if (copybuf[0] == 'k')
+		if (copybuf[0] == PqReplMsg_Keepalive)
 		{
 			int			pos;
 			bool		replyRequested;
@@ -466,7 +467,7 @@ StreamLogicalLog(void)
 			 * We just check if the server requested a reply, and ignore the
 			 * rest.
 			 */
-			pos = 1;			/* skip msgtype 'k' */
+			pos = 1;			/* skip msgtype PqReplMsg_Keepalive */
 			walEnd = fe_recvint64(&copybuf[pos]);
 			output_written_lsn = Max(walEnd, output_written_lsn);
 
@@ -509,7 +510,7 @@ StreamLogicalLog(void)
 
 			continue;
 		}
-		else if (copybuf[0] != 'w')
+		else if (copybuf[0] != PqReplMsg_WALData)
 		{
 			pg_log_error("unrecognized streaming header: \"%c\"",
 						 copybuf[0]);
@@ -521,7 +522,7 @@ StreamLogicalLog(void)
 		 * message. We only need the WAL location field (dataStart), the rest
 		 * of the header is ignored.
 		 */
-		hdr_len = 1;			/* msgtype 'w' */
+		hdr_len = 1;			/* msgtype PqReplMsg_WALData */
 		hdr_len += 8;			/* dataStart */
 		hdr_len += 8;			/* walEnd */
 		hdr_len += 8;			/* sendTime */

src/bin/pg_basebackup/receivelog.c

@@ -21,6 +21,7 @@
 #include "access/xlog_internal.h"
 #include "common/logging.h"
 #include "libpq-fe.h"
+#include "libpq/protocol.h"
 #include "receivelog.h"
 #include "streamutil.h"
 
@@ -338,7 +339,7 @@ sendFeedback(PGconn *conn, XLogRecPtr blockpos, TimestampTz now, bool replyReque
 	char		replybuf[1 + 8 + 8 + 8 + 8 + 1];
 	int			len = 0;
 
-	replybuf[len] = 'r';
+	replybuf[len] = PqReplMsg_StandbyStatusUpdate;
 	len += 1;
 	fe_sendint64(blockpos, &replybuf[len]); /* write */
 	len += 8;
@@ -823,13 +824,13 @@ HandleCopyStream(PGconn *conn, StreamCtl *stream,
 			}
 
 			/* Check the message type. */
-			if (copybuf[0] == 'k')
+			if (copybuf[0] == PqReplMsg_Keepalive)
 			{
 				if (!ProcessKeepaliveMsg(conn, stream, copybuf, r, blockpos,
 										 &last_status))
 					goto error;
 			}
-			else if (copybuf[0] == 'w')
+			else if (copybuf[0] == PqReplMsg_WALData)
 			{
 				if (!ProcessWALDataMsg(conn, stream, copybuf, r, &blockpos))
 					goto error;
@@ -1001,7 +1002,7 @@ ProcessKeepaliveMsg(PGconn *conn, StreamCtl *stream, char *copybuf, int len,
 	 * Parse the keepalive message, enclosed in the CopyData message. We just
 	 * check if the server requested a reply, and ignore the rest.
 	 */
-	pos = 1;					/* skip msgtype 'k' */
+	pos = 1;					/* skip msgtype PqReplMsg_Keepalive */
 	pos += 8;					/* skip walEnd */
 	pos += 8;					/* skip sendTime */
 
@@ -1064,7 +1065,7 @@ ProcessWALDataMsg(PGconn *conn, StreamCtl *stream, char *copybuf, int len,
 	 * message. We only need the WAL location field (dataStart), the rest of
 	 * the header is ignored.
 	 */
-	hdr_len = 1;				/* msgtype 'w' */
+	hdr_len = 1;				/* msgtype PqReplMsg_WALData */
 	hdr_len += 8;				/* dataStart */
 	hdr_len += 8;				/* walEnd */
 	hdr_len += 8;				/* sendTime */

src/include/libpq/protocol.h

@@ -69,6 +69,27 @@
 #define PqMsg_Progress              'P'
 
 
+/* Replication codes sent by the primary (wrapped in CopyData messages). */
+
+#define PqReplMsg_Keepalive			'k'
+#define PqReplMsg_PrimaryStatusUpdate 's'
+#define PqReplMsg_WALData			'w'
+
+
+/* Replication codes sent by the standby (wrapped in CopyData messages). */
+
+#define PqReplMsg_HotStandbyFeedback 'h'
+#define PqReplMsg_PrimaryStatusRequest 'p'
+#define PqReplMsg_StandbyStatusUpdate 'r'
+
+
+/* Codes used for backups via COPY OUT (wrapped in CopyData messages). */
+
+#define PqBackupMsg_Manifest		'm'
+#define PqBackupMsg_NewArchive		'n'
+#define PqBackupMsg_ProgressReport	'p'
+
+
 /* These are the authentication request codes sent by the backend. */
 
 #define AUTH_REQ_OK			0	/* User is authenticated  */