flush_cached_records() was not correctly checking for errors after calling
Item::val_xxx() methods. The expressions may contain subqueries
or stored procedures that cause errors that should stop the statement.
Fixed by correctly checking for errors and propagating them up the call stack.
Need to make sure the tmp join doesn't point to the structure already
freed by the cleanup() for the "base" join, as this can lead to
double free, because sometimes both tmp_join and join point to the
same tmp_table_params.copy_field array.
error in the query.
Fixes a leak after materializing a GROUP BY subquery to a
temp table when the subquery has a blob column in the SELECT
list.
Fixed by correctly destructing temporary buffers for re-usable
queries
Several problems fixed :
1. Non constant expressions in UNION ... ORDER BY were not correctly cleaned up
in st_select_lex_unit::cleanup() causing crashes in EXPLAIN EXTENDED because of
fields quoted by these expressions pointing to the already freed temporary table
used to calculate the UNION.
Fixed by correctly cleaning up expressions of any depth.
2. Subqueries in the order by part of UNION ... ORDER BY ... caused a crash in
EXPLAIN EXTENDED because of a transformation attempt made during EXPLAIN EXTENDED
execution. Fixed by not doing the transformation when in EXPLAIN.
3. Fulltext functions caused crash when in the ORDER BY part of an un-parenthesized
UNION that gets "promoted" to be valid for the whole union, e.g.
SELECT * FROM t1 UNION SELECT * FROM t2 ORDER BY MATCHES (a) AGAINST ('abc' IN BOOLEAN MODE).
This is a case that demonstrates a more general problem of parts of the query being
moved to another level. When doing such transformation late in the optimization run
when most of the flags about the contents of the query are already aggregated it's possible
to "split" the flags so that they correctly reflect the new queries after the transformation.
In specific the ST_SELECT_LEX::ftfunc_list is holding all the free text function for all the
parts of the second SELECT in the UNION and we don't know what part of that is in the ORDER BY
that we're to move to the UNION level and what part is about the other parts of the second SELECT.
Fixed by throwing and error when such statements are about to be processed by adding a check
for the presence of MATCH() inside the ORDER BY clause that's going to get promoted to UNION.
To workaround this new limitation one must parenthesize the UNION SELECTs and provide a real
global ORDER BY for the UNION outside of the parenthesis.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
on re-execution of prepared statement
Problem: some (see eq_ref_table()) ORDER BY/GROUP BY optimization
is called before each PS execution. However, we don't properly
initialize its stucture every time before the call.
Fix: properly initialize the sturture used.
when replicating
The function create_virtual_tmp_table does not
set db_low_byte_first in the same way as
create_tmp_table does, causing copying from
the virtual table to a real table to get strange
values for SET types on big-endian machines.
returns incorrect results with where
An outer join of a const table (outer) and a normal table
(inner) with GROUP BY on a field from the outer table would
optimize away GROUP BY, and thus trigger the optimization to
do away with a temporary table if grouping was performed on
columns from the const table, hence executing the query with
filesort without temporary table. But this should not be
done if there is a non-indexed access to the inner table,
since filesort does not handle joins. It expects either ref
access, range ditto or table scan. The join condition will
thus not be applied.
Fixed by always forcing execution with temporary table in
the case of ROLLUP with a query involving an outer join. This
is a slightly broader class of queries than need fixing, but
it is hard to ascertain the position of a ROLLUP field wrt
outer join with current query representation.
int join_read_key(JOIN_TAB*)
The eq_ref access method TABLE_REF (accessed through
JOIN_TAB) to save state and to track if this is the
first row it finds or not.
This state was not reset on subquery re-execution
causing an assert.
Fixed by resetting the state before the subquery
re-execution.
int join_read_key(JOIN_TAB*)
The eq_ref access method TABLE_REF (accessed through
JOIN_TAB) to save state and to track if this is the
first row it finds or not.
This state was not reset on subquery re-execution
causing an assert.
Fixed by resetting the state before the subquery
re-execution.
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
An error occuring in the execution of a stored procedure, called
from do_select is masked, since the error condition is not
propagated back to the caller (join->conds->val_int() returns
a result value, and not an error code)
An explicit check was added to see if the thd error code has been
set, and if so, the loop status is set to the error state.
Backport from 6.0-codebase (revid: 2617.68.31)
This fix has been proposed by Sergey Petrunya and has been contributed
under SCA by sca@askmonty.org.
The cause for this valgrind error is that in the function
add_cond_and_fix() in sql_select.cc an Item_cond_and object is
created. This is marked as fixed but does not have a correct
table_map() attribute. Later, in make_join_select(), if
engine_condition_pushdown is in use, this table map is used and
results in the valgrind error.
The fix is to add a call to update_used_tables() in add_cond_and_fix()
so that the table map is updated correctly.
This patch is tested by multiple existing tests (e.g. the tests
innodb_mysql, innodb, fulltext, compress all produces this valgrind
warning/error without this fix).
Part 2 :
There was a special optimization on the ref access method for
ORDER BY ... DESC that was set without actually looking on the type of the
selected index for ORDER BY.
Fixed the SELECT ... ORDER BY .. DESC (it uses a different code path compared
to the ASC that has been fixed with the previous fix).
field='const1' AND field='const2' in some cases
Building multiple equality predicates containing
a constant which is compared as a datetime (with a field)
we should take this fact into account and compare the
constant with another possible constatns as datetimes
as well.
E.g. for the
SELECT ... WHERE a='2001-01-01' AND a='2001-01-01 00:00:00'
we should compare '2001-01-01' with '2001-01-01 00:00:00' as
datetimes but not as strings.
Constant expressions in WHERE/HAVING/ON clauses aren't cached and evaluated
for each row. This causes slowdown of query execution especially if constant
UDF/SP function are used.
Now WHERE/HAVING/ON expressions are analyzed in the top-bottom direction with
help of the compile function. When analyzer meets a constant item it
sets a flag for the tree transformer to cache the item and doesn't allow tree
walker to go deeper. Thus, the topmost item of a constant expression if
cached. This is done after all other optimizations were applied to
WHERE/HAVING/ON expressions
A helper function called cache_const_exprs is added to the JOIN class.
It calls compile method with caching analyzer and transformer on WHERE,
HAVING, ON expressions if they're present.
The cache_const_expr_analyzer and cache_const_expr_transformer functions are
added to the Item class. The first one check if the item can be cached and
the second caches it if so.
A new Item_cache_datetime class is derived from the Item_cache class.
It caches both int and string values of the underlying item independently to
avoid DATETIME aware int-to-string conversion. Thus it completely relies on
the ability of the underlying item to correctly convert DATETIME value from
int to string and vice versa.
----------------------------------------------------------
revno: 2630.4.26
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-prelocked_mode-to-push
timestamp: Fri 2008-06-06 23:19:04 +0400
message:
WL#3726: work on review comments.
Remove thd->locked_tables. Always store MYSQL_LOCK instances in
thd->lock.
Rename thd->prelocked_mode to thd->locked_tables_mode.
Use thd->locked_tables_mode to determine if we
are under LOCK TABLES. Update the code to not assume that
if thd->lock is set, LOCK TABLES mode is off.
Review comments.
----------------------------------------------------------------------
ChangeSet@1.2571, 2008-04-08 12:30:06+02:00, vvaintroub@wva. +122 -0
Bug#32082 : definition of VOID in my_global.h conflicts with Windows
SDK headers
VOID macro is now removed. Its usage is replaced with void cast.
In some cases, where cast does not make much sense (pthread_*, printf,
hash_delete, my_seek), cast is ommited.
Bug #48370 Absolutely wrong calculations with GROUP BY and
decimal fields when using IF
Added the test cases in the above two bugs for regression
testing.
Added additional tests that demonstrate a incomplete fix.
Added a new factory method for Field_new_decimal to
create a field from an (decimal returning) Item.
In the new method made sure that all the precision and
length variables are capped in a proper way.
This is required because Item's can have larger precision
than the decimal fields and thus need to be capped when
creating a field based on an Item type.
Fixed the wrong typecast to Item_decimal.
init_read_record() - (records.cc:274)
Item_cond::used_tables_cache was accessed in
records.cc#init_read_record() without being initialized. It had
not been initialized because it was wrongly assumed that the
Item's variables would not be accessed, and hence
quick_fix_field() was used instead of fix_fields() to save a few
CPU cycles at creation time.
The fix is to properly initilize the Item by replacing
quick_fix_field() with fix_fields().
------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
Bug#15192 "fatal errors" are caught by handlers in stored procedures
The problem is that fatal errors (e.g.: out of memory) were being
caught by stored procedure exception handlers which could cause
the execution to not be stopped due to a continue handler.
The solution is to not call any exception handler if the error is
fatal and send the fatal error to the client.
memory
The server was doing a bad class typecast causing setting of
wrong value for the maximum number of items in an internal
structure used in equality propagation.
Fixed by not doing the wrong typecast and asserting the type
of the Item where it should be done.
