The problem is that cond->fix_fields(thd, 0) breaks
condition(cuts off 'having'). The reason of that is
that NULL valued Item pointer is present in the
middle of Item list and it breaks the Item processing
loop.
performance degradation.
Filesort + join cache combination is preferred to full index scan because it
is usually faster. But it's not the case when the index is clustered one.
Now test_if_skip_sort_order function prefers filesort only if index isn't
clustered.
The problem was in an incorrect debug assertion. The expression
used in the failing assertion states that when finding
references matching ORDER BY expressions, there can be only one
reference to a single table. But that does not make any sense,
all test cases for this bug are valid examples with multiple
identical WHERE expressions referencing the same table which
are also present in the ORDER BY list.
Fixed by removing the failing assertion. We also have to take
care of the 'found' counter so that we count multiple
references only once. We rely on this fact later in
eq_ref_table().
It appears that stack overflow checks for recusrive stored procedure
calls, that run in the normal server, did not work in embedded and were
dummified with preprocessor magic( #ifndef EMBEDDED_SERVER ).
The fix is to remove ifdefs, there is no reason not to run overflow checks
and crash in deeply recursive calls.
Note: Start of the stack (thd->thread_stack variable) in embedded is not
necessarily exact but stil provides the best guess. Unless the caller of
mysql_read_connect() is already deep in the stack, thd->thread_stack
variable should approximate stack start address well.
The problem is that during temporary table creation uneven bits
are not taken into account for hidden fields. It leads to incorrect
calculation&allocation of null bytes size for table record. And
if grouped value is null we set wrong bit for this value(see end_update()).
Fixed by adding separate calculation of uneven bit for hidden fields.
function with distinct.
Loose index scan is used to find MIN/MAX values using appropriate index and
thus allow to avoid grouping. For each found row it updates non-aggregated
fields with values from row with found MIN/MAX value.
Without loose index scan non-aggregated fields are copied by end_send_group
function. With loose index scan there is no need in end_send_group and
end_send is used instead. Non-aggregated fields still need to be copied and
this was wrongly implemented in QUICK_GROUP_MIN_MAX_SELECT::get_next.
WL#3220 added a case when loose index scan can be used with end_send_group to
optimize calculation of aggregate functions with distinct. In this case
the row found by QUICK_GROUP_MIN_MAX_SELECT::get_next might belong to a next
group and copying it will produce wrong result.
Update of non-aggregated fields is moved to the end_send function from
QUICK_GROUP_MIN_MAX_SELECT::get_next.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_slow_query_log.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/options.cc
Text conflict in sql/mysqld.cc
Grouping by a subquery in a query with a distinct aggregate
function lead to a wrong result (wrong and unordered
grouping values).
There are two related problems:
1) The query like this:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa
returned wrong result, because the outer reference "t1.a"
in the subquery was substituted with the Item_ref item.
The Item_ref item obtains data from the result_field object
that refreshes once after the end of each group. This data
is not applicable to filesort since filesort() doesn't care
about groups (and doesn't update result_field objects with
copy_fields() and so on). Also that data is not applicable
to group separation algorithm: end_send_group() checks every
record with test_if_group_changed() that evaluates Item_ref
items, but it refreshes those Item_ref-s only after the end
of group, that is a vicious circle and the grouped column
values in the output are shifted.
Fix: if
a) we grouping by a subquery and
b) that subquery has outer references to FROM list
of the grouping query,
then we substitute these outer references with
Item_direct_ref like references under aggregate
functions: Item_direct_ref obtains data directly
from the current record.
2) The query with a non-trivial grouping expression like:
SELECT (SELECT t1.a) aa, COUNT(DISTINCT b) c
FROM t1 GROUP BY aa+0
also returned wrong result, since JOIN::exec() substitutes
references to top-level aliases in SELECT list with Item_copy
caching items. Item_copy items have same refreshing policy
as Item_ref items, so the whole groping expression with
Item_copy inside returns wrong result in filesort() and
end_send_group().
Fix: include aliased items into GROUP BY item tree instead
of Item_ref references to them.
fulltext search and row op.
The search for fulltext indexes is searching for some special
predicate layouts. While doing so it's not checking for the number
of columns of the expressions it tries to calculate.
And since row expressions can't return a single scalar value there
was a crash.
Fixed by checking if the expressions are scalar (in addition to
being constant) before calling Item::val_xxx() methods.
Fixed 2 problems :
1. test_if_order_by_key() was continuing on the primary key
as if it has a primary key suffix (as the secondary keys do).
This leads to crashes in ORDER BY <pk>,<pk>.
Fixed by not treating the primary key as the secondary one
and not depending on it being clustered with a primary key.
2. The cost calculation was trying to read the records
per key when operating on ORDER BYs that order on all of the
secondary key + some of the primary key.
This leads to crashes because of out-of-bounds array access.
Fixed by assuming we'll find 1 record per key in such cases.
column is used for ORDER BY
Problem: filesort isn't meant for null length sort data
(e.g. char(0)), that leads to a server crash.
Fix: disregard sort order if sort data record length is 0 (nothing
to sort).
The problem becomes apparent only if HAVE_purify is undefined.
It related to the part of code placed in open_table_from_share() fuction
where we initialize record buffer only if HAVE_purify is enabled.
So in case of HAVE_purify=OFF record buffer is not initialized
on open table stage.
Next we read key, find NULL value and update appropriate null bit
but do not update record buffer. After that the record is stored
in the join cache(store_record_in_cache). For CHAR fields we
strip trailing spaces and in our case this procedure uses
uninitialized record buffer.
The fix is to skip stripping space procedure in case of null values
for CHAR fields(partially based on 6.0 JOIN_CACHE implementation).
Queries optimized with GROUP_MIN_MAX didn't cleanup KEYREAD
optimization properly. As a result subsequent queries may
return incomplete rows (fields are initialized to default
values).
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
"set engine_condition_pushdown" is deprecated, engine condition pushdown is controlled
by a new "set optimizer_switch=engine_condition_pushdown=on|off".
subselect_single_select_engine::exec()
When a subquery doesn't need to be evaluated because
it returns only aggregate functions and these aggregates
can be calculated from the metadata about the table it
was not updating all the relevant members of the JOIN
structure to reflect that this is a constant query.
This caused problems to the enclosing subquery
('<> SOME' in the test case above) trying to read some
data about the tables.
Fixed by setting const_tables to the number of tables
when the SELECT is optimized away.
error in the query.
Fixes a leak after materializing a GROUP BY subquery to a
temp table when the subquery has a blob column in the SELECT
list.
Fixed by correctly destructing temporary buffers after doing
the conversion.
