Added this option, named as "--dump-slave". The purpose of this option is to be
able to produce a dump from a slave used for making backups of the master. Originally,
dumping from the main master was fine, but as more data accumulated, the dump process
would take over 30 minutes, locking up the master database hence website for 30 minutes.
A slave dedicated to producing backups was the answer, but I needed a dump that could be
used to restore a slave instantly and in order to do that, it has to have three things
contained in the dump:
1. "STOP SLAVE;" at the beginning
2. "CHANGE MASTER TO ...<the master - info from 'show slave status'>"
3. "START SLAVE;" at the end
These options in this changeset contain this.
--stop-slave adds "STOP SLAVE" to the beginning of the dump and "STOP SLAVE"
to the end of the dump.
--include-host gives the user the option to have the host explicitely added
to the "CHANGE MASTER TO ..." line.
--dump-slave adds the "CHANGE MASTER ..." to the dump representing not the slave's
master binlog info, but the slave's master's info from "SHOW SLAVE STATUS"
client/client_priv.h:
Added OPT_SLAVE_DATA to client_priv.h
client/mysqldump.c:
* Added --dump-slave option (name per Brian)
* Added --stop-slave to print "STOP SLAVE;" into the dump
* Added --include-host option to include "MASTER_HOST=..." and "MASTER_PORT=..."
to the dump since unlike --master-data, the host can't be assumed to be
the local host
* Added do_start_slave and do_stop_slave to stop the slave sql thread upon
start of the dump process, and to start the slave sql upon finish of dump process -
to keep the log information frozen during this time.
* Added do_show_slave_status for obtaining slave information needed to compose
"CHANGE MASTER ..." output to the master of this slave.
* Added necessary long options and defines required for new options
Feature from Eric Bergen, CLA signed 2007-06-27.
Adds new mysql client option "--auto-vertical-output", which causes
the client to test whether a result table is too wide for the current
window (where available) and emit vertical results in that case.
Otherwise, it sends normal tabular results.
client/client_priv.h:
Add another enum value to client options, for automatic vertical output.
client/mysql.cc:
Add another command-line option, "auto-vertical-output".
Add functions to get the terminal width and functions to get the widths of fields.
Use them together to emit vertical output when some output table is too wide to
fit in the terminal. If the terminal doesn't support reading its width, then assume
80-positions wide.
mysql-test/r/mysql.result:
Show that various select statements do work as expected. Wide tables become vertical
and narrow ones do not.
mysql-test/t/mysql.test:
Show that various select statements do work as expected.
These should be suitable for a wide range of window capabilities and sizes. Under
extreme circumstances, the results could be arbitrary.
The presence of "--skip" parameters is obscure, when it should be
obvious from the text.
Now, for boolean options, when they're default to ON and the --skip
is more useful parameter, then tell the user of its existence.
Backported from 6.0-codebase, revid 2572.14.1
The reason for the bug is that mysqtest as well as other client tools
running in test suite (mysqlbinlog, mysqldump) will first try to connect
whatever database has created shared memory with default base name
"MySQL" and use this. (Same effect could be seen on Unix if mtr would
not care to calculate "port" and "socket" parameter).
The fix ensures that all client tools and running in mtr use unique
per-database shared memory base parameters, so there is no possibility
to clash with already installed one. We use socket name for shared memory
base (it's known to be unique). This shared-memory-base is written to the
MTR config file to the [client] and [mysqld] sections. Fix made also made
sure all client tools understand and correctly handle --shared-memory-base.
Prior to this patch it was not the case for mysqltest, mysqlbinlog and
mysql_client_test.
All new connections done from mtr scripts via connect() will by default
set shared-memory-base. And finally, there is a possibility to force
shared memory or pipe connection and overwrite shared memory/pipe base name
from within mtr scripts via optional PIPE or SHM modifier. This functionality
was manually backported from 6.0
(original patch http://lists.mysql.com/commits/74749)
When starting the (5.1+) mysql command-line client, we try to get
"select @@version_comment" from the server to present it to the
user. Recent clients are aware that older servers do not have that
variable and fall back on other info to be able to present *something*
at least. This fallback string was allocated through the POSIX interface,
but released through the my*() suite, which rightfully complained about
the imbalance in calls when compiled with --debug. While this wasn't
as bad as it looked (no double-free, use of uninitialized or freed
buffer, etc.), it did look funky.
Using my_strdup() now for what will be my_free()d later.
client/mysql.cc:
Use my_strdup() for server_version, as we'll my_free() it later
and don't want to upset the mysql client's memory accounting.
(backport)
mysql_upgrade script accepts --upgrade-system-tables option,
fixing only system tables in this case.
per-file comments:
client/mysql_upgrade.c
WL#4991 mysql_upgrade --fix-privilege-tables
--upgrade-system-tables option added.
if it is set, the tool won't look for the mysqlcheck then
run_mysqlcheck_fixnames() and run_mysqlcheck_upgrade won't be called.
mysql-test/r/mysql_upgrade.result
WL#4991 mysql_upgrade --fix-privilege-tables
test result added
mysql-test/t/mysql_upgrade.test
WL#4991 mysql_upgrade --fix-privilege-tables
test case added
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
There are some problems about help text:
- It is stated that "auto" is the default twice. It need be stated only once.
- It is stated that --base64-output is short for --base64-output=always. But that sounds
like the default is "always", not "auto".
Make the help text clear as following:
Determine when the output statements should be base64-encoded BINLOG
statements: 'never' disables it and works only for binlogs without
row-based events; 'auto' prints base64 only when necessary (i.e.,
for row-based events and format description events); 'always' prints
base64 whenever possible. 'always' is for debugging only and should
not be used in a production system. If this argument is not given,
the default is 'auto'; if it is given with no argument, 'always' is used.
If a thread is killed in the server, we throw "shutdown" only if one is actually in
progress; otherwise, we throw "query interrupted".
Control-C in the mysql command-line client is "incremental" now.
First Control-C sends KILL QUERY (when connected to 5.0+ server, otherwise, see next)
Next Control-C sends KILL CONNECTION
Next Control-C aborts client.
As the first two steps only pertain to an existing query,
Control-C will abort the client right away if no query is running.
client will give more detailed/consistent feedback on Control-C now.
client/mysql.cc:
Extends Control-C handling; enhances up feedback to user.
On 5.0+ servers, we try to be nice and send KILL QUERY first
if Control-C is pressed in the command-line client, but if
that doesn't work, we now give the user the opportunity to
send KILL CONNECTION with another Control-C (and to kill the
client with another Control-C if that somehow doesn't work
either).
mysql-test/t/flush_read_lock_kill.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/kill.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/rpl000001.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
mysql-test/t/rpl_error_ignored_table.test:
we're getting correct "thread killed" rather than
"in shutdown" error now
sql/records.cc:
make error messages on KILL uniform for rr_*()
by folding that handling into rr_handle_error()
sql/sql_class.h:
Only throw "shutdown" when we have one flagged as being in progress;
otherwise, throw "query interrupted" as it's likely to be "KILL CONNECTION"
or related.
Original revision:
revno: 2617.55.2
committer: Alexander Nozdrin <alik@sun.com>
branch nick: azalea-bf-bug38992
timestamp: Fri 2009-06-19 16:41:16 +0400
message:
Fix for Bug#38992: Server crashes sporadically with
'waiting for initial ...' msg on windows.
The problem is that connection timeout is too small
for busy windows box.
The fix is to
- add support for connect_timeout command line argument
to mysqltest;
- set default value of the connect_timeout option to
120 seconds.
A fix and a test case for Bug#34898 "mysql_info() reports 0 warnings
while mysql_warning_count() reports 1"
Review the patch by Chad Miller, implement review comments
(since Chad left) and push the patch.
This bug is actually not a bug. At least according to Monty.
See Bug#841 "wrong number of warnings" reported back in July 2003
and closed as "not a bug".
mysql_info() was printing the number of truncated columns, not
the number of warnings.
But since the message of mysql_info() was "Warnings: <number of truncated
columns>", people would expect to get the number
of warnings in it, not the number of truncated columns.
So a possible fix would be to change the message of mysql_info()
to say Rows changed: <n>, truncated: <m>.
Instead, put the number of warnings there. That is, remove the
feature that thd->cuted_fields (the number of truncated fields)
is exposed to the client. The number of truncated columns can be
calculated on the client, by analyzing SHOW WARNINGS output,
and in future we may remove thd->cuted_fields altogether.
So let's have one less thing to worry about.
client/mysqltest.cc:
Fix a bug in mysqltest program which used to return
a wrong number of affected rows in ps-protocol, and a wrong
mysql_info() information in both protocols in presence of warnings.
mysql-test/r/insert.result:
Update results (Bug#34898)
mysql-test/suite/rpl/r/rpl_udf.result:
Update to the changed output of mysqltest: mysql_info() is now printed
before warnings.
mysql-test/t/insert.test:
Add a test case for Bug#34898.
sql/sql_table.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
sql/sql_update.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
------------------------------------------------------------
revno: 2476.657.208
committer: anozdrin/alik@station.
timestamp: Tue 2007-12-04 17:22:53 +0300
message:
Remove rpl_probe, enable_rpl_parse and disable_rpl_parse commands
from mysqltest, the corresponding funtctions have been removed from
MySQL C API
client/mysqltest.cc:
Remove unused functions.
libmysql/CMakeLists.txt:
Remove manager.c from Windows build.
sql-common/client.c:
A post-merge fix.
