Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
.bzrignore:
New files added
client/Makefile.am:
New files added
client/mysqlbinlog.cc:
Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
New files added
mysql-test/extra/rpl_tests/check_type.inc:
Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding code to enable type conversions for BIT tests since InnoDB
cannot handle them properly due to incorrect information stored as
metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
Test file to check a set of type conversions
with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
Test file to test conversions from master to slave with
all possible values for slave_type_conversions.
The test also checks that the slave_type_conversions
variable works as expected.
sql/field.cc:
Changing definition of compatible_field_size to both check if
two field with identical base types are compatible and give an
order between them if they are compatible.
This only implement checking on the slave, so it will not affect
replication from an old master to a new slave.
sql/field.h:
Changing prototypes for functions:
- compatible_field_size()
- init_for_tmp_table()
- row_pack_length()
sql/log_event.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/log_event_old.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/mysql_priv.h:
Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
Removing function get_tabledef and replacing it with get_table_data().
This function retrieve data for table opened for replication, not just
table definition.
sql/rpl_utility.cc:
Function table_def::compatible_with is changed to compare table on master
and slave for compatibility and generate a conversions table if they are
compatible.
Computing real type of fields from metadata for ENUM and SET types.
Computing pack_length correctly for ENUM, SET, and BLOB types.
Adding optimization to not check compatibility if no
slave type conversions are enabled.
sql/rpl_utility.h:
Changing prototypes since implementation has changed.
Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
Adding error messages for slave type conversions.
sql/sql_class.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
Correcting create_virtual_tmp_table() to compute null bit positions
correctly in the presence of bit fields.
------------------------------------------------------------
revno: 2630.22.3
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Thu 2008-08-07 22:33:43 -0300
message:
WL#4284: Transactional DDL locking
Make transaction management more modular through a new interface.
The overall objective of this change is to provide groundwork
for the design of transactional DDL locking by cleaning up the
transaction high level API to better distinguish operations implicit
and explicit, and single statement transaction from operations on
the normal transaction.
Having a a high-level interface for transaction management provides
a better base for implementing transactional concepts that are not
always tied to storage engines and also makes it easier to interect
with other higher level modules of the server.
client/Makefile.am:
Add new file to the build.
libmysqld/CMakeLists.txt:
Add new file to the build.
libmysqld/Makefile.am:
Add new file to the build.
sql/CMakeLists.txt:
Add new file to the build.
sql/Makefile.am:
Add new file to the build.
sql/handler.cc:
Remove multiplexer commit or rollback function. Most callers already
have enough information to decided whether to rollback or commit.
Having plain and well named functions makes it easier to read
and understand code.
sql/handler.h:
Remove wrapper function as the low level transaction functions
shouldn't be called directly anymore.
sql/log_event.cc:
Rename transaction management functions to the new names.
sql/log_event_old.cc:
Rename transaction management functions to the new names.
sql/mysql_priv.h:
Remove obsolete functions for implicit and explicit commit.
sql/rpl_injector.cc:
Rename transaction management functions to the new names.
sql/rpl_rli.cc:
Rename transaction management functions to the new names.
sql/set_var.cc:
Rename transaction management functions to the new names.
sql/slave.cc:
Rename transaction management functions to the new names.
sql/sql_base.cc:
Rename transaction management functions to the new names.
sql/sql_class.cc:
Rename transaction management functions to the new names.
sql/sql_delete.cc:
Rename transaction management functions to the new names.
sql/sql_do.cc:
Rename transaction management functions to the new names.
sql/sql_insert.cc:
Rename transaction management functions to the new names.
sql/sql_parse.cc:
Rename transaction management functions to the new names.
sql/sql_partition.cc:
Rename transaction management functions to the new names.
sql/sql_table.cc:
Rename transaction management functions to the new names.
sql/transaction.cc:
Implement wrapper functions to differentiate operations on
the single statement transaction from the ones operating
on the normal transaction.
sql/transaction.h:
Export new functions for dealing with transaction commands.
"mysql_upgrade (ver 5.1) add 3 fields to mysql.proc table but does
not set values".
mysql_upgrade (ver 5.1) adds 3 fields (character_set_client,
collation_connection and db_collation) to the mysql.proc table, but
does not set any values. When we run stored procedures, which were
created with mysql 5.0, a warning is logged into the error log.
The solution to this is for mysql_upgrade to set default best guess
values for these fields. A warning is also written during upgrade, to
make the user aware that default values are set.
client/mysql_upgrade.c:
Result lines which start with "WARNING" are passed through to the output.
This way we have a way of triggering WARNING-messages during upgrade
directly from the .sql-script.
mysql-test/r/mysql_upgrade.result:
Expected result of the test.
mysql-test/t/mysql_upgrade.test:
Added a test-case for the bug.
scripts/mysql_system_tables_fix.sql:
The new fields are populated, and warnings are written.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
mysql client displays wrong character-set of server. When a user changes the
charset of a server, mysql client 'status' command displays wrong charset but
the command "SHOW VARIABLES LIKE "%charset%" displayed correct charset results.
The problem is only with the mysql client's 'status' command output.
In mysql client, the method mysql_store_lazy_result() returns 0 for
success and non-zero for failure. The method com_status() was using this method
wrongly. Fixed all such instances according to return value of the method
mysql_store_lazy_result().
client/mysql.cc:
Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
Fix com_status() method to use mysql_store_lazy_result() properly.
mysql-test/r/bug47671.result:
Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
Testcase for BUG#47671
mysql-test/t/bug47671-master.opt:
Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
Testcase for BUG#47671
mysql-test/t/bug47671.test:
Fix for BUG#47671 - wrong character-set after upgrade from 5.1.34 to 5.1.39
Testcase for BUG#47671
The mentioned on the bug report set of bugs fixes have not be pushed to the main trees.
Fixed with extracting commits done to 6.0-rpl tree and applying them to the main 5.1.
Notes.
1. part of changes - the mtr's specific - were packported to the main 5.0 tree for mtr v1
as http://lists.mysql.com/commits/46562
However, there is no that fix anymore in the mtr v2. (This fact was mailed to mtr maintaining
people).
2. Bug@36929 crash in kill_zombie_dump_threads-> THD::awake() with replication tests
is not backported because the base code of the patch is libevent and that was removed
from the main trees due to its instability.
client/mysqlbinlog.cc:
fixes for BUG#35546
mysql-test/suite/rpl/r/rpl_bug41902.result:
the new tests result file is added.
mysql-test/suite/rpl/t/rpl_bug41902-slave.opt:
conf file for bug41902 testing is added.
mysql-test/suite/rpl/t/rpl_bug41902.test:
regression tests for Bug #41902 is added.
sql/log.cc:
collection of changes due to Bug #48463.
sql/log.h:
collection of changes due to Bug #48463.
sql/rpl_rli.h:
collection of changes due to Bug #48463.
sql/slave.cc:
collection of changes due to Bug #48463.
sql/sql_repl.cc:
collection of changes due to Bug #48463.
STRING_RESULT argument
There is a "magic" number for precision : NOT_FIXED_DEC.
This means that the precision is not a fixed number.
But this constant was re-defined in several files and
was not available to the UDF developers.
Moved the NOT_FIXED_DEC definition to the correct header
and removed the redundant definitions.
Backported to 5.6.0 (mysql-next-mr-runtime)
client/sql_string.h:
moved NOT_FIXED_DEC to the correct header
include/mysql_com.h:
moved NOT_FIXED_DEC to the correct header
libmysql/libmysql.c:
moved NOT_FIXED_DEC to the correct header
sql/field.h:
moved NOT_FIXED_DEC to the correct header
sql/sql_string.h:
moved NOT_FIXED_DEC to the correct header
storage/ndb/include/kernel/signaldata/DictTabInfo.hpp:
moved NOT_FIXED_DEC to the correct header
The additional patch. That 'loadxml.test' failure was actually about our testing system,
not the code.
Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
can be evaluated, then started in a parallel thread. We only have separane 'send' and
'eval' commands at the moment.
Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
before the test goes further. The present 'reap' command doesn't handle the killed threads
well.
per-file comments:
client/mysqltest.cc
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
The 'send_eval' command implemented.
mysql-test/r/loadxml.result
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test result updated.
mysql-test/t/loadxml.test
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test case added.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
client/mysqltest.cc:
Add support for named pipe and shared memory connections.
include/violite.h:
Move private functions to vio/vio_priv.h
Add poll_read and is_connected methods.
mysql-test/t/named_pipe.test:
Run tests over a named pipe connection.
mysql-test/t/shm.test:
Run tests over a shared memory connection.
sql/item_func.cc:
Rename method.
sql/sql_class.cc:
Remove higher-level vio_is_connected implementation.
sql/sql_class.h:
Rename vio_is_connected to not conflict with the vio one.
Verify that there is a valid vio.
vio/vio.c:
Add poll_read and is_connected methods.
vio/vio_priv.h:
Add private functions.
vio/viosocket.c:
Implement the is_connected method for the various transports.
BUILD-CMAKE:
WL#5161 : Documentation on how to build with CMake on Unix/Windows
BUILD/Makefile.am:
Add new file
BUILD/autorun.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
BUILD/choose_configure.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
CMakeLists.txt:
WL#5161 : Rewrite top-level CMakeLists.txt.
Remove Windows specifics
- compiler flags handling moved to configure.cmake
- storage engine/plugin stuff moved into cmake/plugin.cmake
- copy docs
Makefile.am:
Added new files
client/CMakeLists.txt:
WL#5161 : Rewrite CMakeLists.txt to be platform-independent
Handle packagng (add INSTALL commands)
cmake/Makefile.am:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
cmake/abi_check.cmake:
Custom targets for abi_check (for cmake)
cmake/bison.cmake:
- Check bison availability
- Add RUN_BISON macro (used to create sql_yacc.cc and sql_yacc.h)
cmake/cat.cmake:
Add helper script to concatenate files.
cmake/character_sets.cmake:
Handle configuration parameters WITH_EXTRA_CHARSETS
cmake/check_minimal_version.cmake:
Helper script to check the minimum required version of cmake
cmake/configure.pl:
Add perl script to convert ./configure parameters for cmake
cmake/create_initial_db.cmake.in:
Add script helper to create initial database.
(on Windows, we pack initial db with the redistribution
package)
cmake/do_abi_check.cmake:
Perform abi check
cmake/dtrace.cmake:
Handle dtrace in CMake Build.
Check for dtrace availablility,
run dtrace -G on solaris in prelink step
cmake/dtrace_prelink.cmake:
Run dtrace -G on Solaris in pre-link step,
link the object it creates together with library or
executable
cmake/install_macros.cmake:
Helper macros for packaging
(install pdb on Windows, install symlinks on Unix)
cmake/make_dist.cmake.in:
"make dist" -
- pack autotools ./configure script with the source
(renamed to configure.am)
- pack bison output
cmake/merge_archives_unix.cmake.in:
script to merge static libraries on Unix
cmake/misc.cmake:
Build helper macros
- MERGE_STATIC_LIBS
We use it when building client library and embedded
(avoid recompilation)
- Convert source file paths to absolute names.
We use it in to locate files of a different project,
when the files need to be recompiled (e.g in embedded
several storage engines are recompiled with
-DEMBEDDED_LIBRARY)
cmake/mysql_version.cmake:
Extract version info from configure.in
Handle package names.
cmake/plugin.cmake:
Rewrote storage/mysql_storage_engine.cmake to handle
other types of plugins and do it in OS-independent manner.
cmake/readline.cmake:
Macros to handle WITH_READLINE/WITH_LIBEDIT parameters
cmake/ssl.cmake:
Add macros to handle WITH_SSL parameter.
cmake/stack_direction.c:
Helper to check stack direction.
cmake/zlib.cmake:
Add macros to handle WITH_ZLIB parameter
cmd-line-utils/libedit/CMakeLists.txt:
Build libedit with cmake.
cmd-line-utils/libedit/Makefile.am:
Add new file
cmd-line-utils/readline/CMakeLists.txt:
Build readline with CMake.
cmd-line-utils/readline/Makefile.am:
Add new file
config.h.cmake:
WL#5161 : Add config.h template for cmake
configure.cmake:
WL#5161 : Add platform tests ( for cmake)
configure.in:
Added new subdirectories
dbug/CMakeLists.txt:
WL#5161
extra/CMakeLists.txt:
WL#5161
extra/yassl/CMakeLists.txt:
WL#5161
extra/yassl/taocrypt/CMakeLists.txt:
WL#5161
include/Makefile.am:
Add new file
include/keycache.h:
remove configure-win.h and remove HUGE_PTR defined there.
include/my_global.h:
use my_config.h for Windows, not config-win.h anymore
include/my_pthread.h:
- Move thread_safe_increment from config-win.h to other headers
(config-win.h is not used anymore)
- Declare pthread_cancel on Windows (it is used in daemon_example)
include/my_sys.h:
Add malloc.h on Windows (we use -D_WIN32_LEAN_AND_MEAN now, and
with this define malloc.h is not included automatically via windows.h)
include/mysql/plugin.h:
Handle pure-C plugins with Microsoft compiler.
include/thr_alarm.h:
remove rf_SetTimer that used to be defined in config-win.h
Replace with UINT_PTR (we do not use config-win.h anymore
and typedef was needed in this single place only)
libmysql/CMakeLists.txt:
Avoid pointless recompilation of source files
in client library if possible. Merge static
libs (dbug, mysys) to create static client
library.
libmysqld/CMakeLists.txt:
Avoid pointless recompilation of source files
when building embedded. Instead, merge dbug and
mysys (and some other static libs) into embedded.
libmysqld/examples/CMakeLists.txt:
Embedded compilation on Unix
libmysqld/lib_sql.cc:
Do not define THD::clear_error() in lib_sql.cc
for embedded. Instead, use the same inline
definition from sql_class.h as in none-embedded
case (fixes duplicate symbol errors on Windows
and removes pointless #ifdef EMBEDDED)
man/CMakeLists.txt:
Install man files.
man/Makefile.am:
Add new file.
mysql-test/CMakeLists.txt:
Install mysql-test files
mysql-test/Makefile.am:
Add new files
mysql-test/lib/My/ConfigFactory.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/Find.pm:
the build configurations are now also available on Unix
Xcode on Mac uses the Release, RelwithDebinfo and Debug
subdirectories for executables. Earlier, build configurations
were available only on Windows.
mysql-test/lib/My/SafeProcess.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/SafeProcess/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysql-test/lib/My/SafeProcess/safe_kill_win.cc:
add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
mysql-test/lib/My/SafeProcess/safe_process_win.cc:
Add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
define JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE if not defined
(can happen using MinGW compiler that comes with old SDK)
mysql-test/mtr.out-of-source:
Allow testing with mtr in out-of-source builds.
mysql-test/mysql-test-run.pl:
Allow testing with mtr in out-of-source builds.
Use common find_plugin macro for Windows and unix.
mysql-test/t/fulltext_plugin.test:
This test can now run on Windows as well.
mysys/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysys/my_create.c:
config-win.h is dead => NO_OPEN_3 is never defined.
mysys/my_getsystime.c:
config-win.h is dead => define OFFSET_TO_EPOCH where it is used.
mysys/my_winthread.c:
Add win32 pthread_cancel - used by daemon_example
mysys/mysys_priv.h:
config-win.h is dead => include <sys/stat.h> where it is used
fix prototype of my_win_(f)stat
plugin/daemon_example/CMakeLists.txt:
Compile daemon_example with CMake
plugin/daemon_example/Makefile.am:
Add new file
plugin/fulltext/CMakeLists.txt:
Compile full-text example with CMake
plugin/fulltext/Makefile.am:
Add new file.
plugin/semisync/CMakeLists.txt:
Fix semisync to use common macro for plugins.
regex/CMakeLists.txt:
Use absolute filenames, when adding regex library
(we recompile files in embedded, and want to locate
sources via GET_TARGET_PROPERTY( ... SOURCES ..))
regex/regex2.h:
Remove pointless typedef (produces error with MinGW compiler)
scripts/CMakeLists.txt:
Add configure/install for scripts
sql-bench/CMakeLists.txt:
install sql-bench files
sql-bench/Makefile.am:
Add new file
sql/CMakeLists.txt:
Port CmakeLists.txt to Unix
sql/nt_servc.cc:
compile server with -DWIN32_LEAN_AND_MEAN
sql/share/CMakeLists.txt:
Install charsets
sql/share/Makefile.am:
Add new file
sql/sql_builtin.cc.in:
Handle pure-C plugins on Windows.
sql/sql_class.h:
Use the same clear_error macro in embedded and not embedded.
Fixes pointless #ifdef and avoids duplicate symbols when linking
on Windows.
storage/Makefile.am:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
storage/archive/CMakeLists.txt:
Add names for static and dynamic plugin libraries.
Link archive with zlib
storage/blackhole/CMakeLists.txt:
Add names for static and dynamic storage
engine libraries
storage/csv/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/example/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/federated/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/heap/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/ibmdb2i/CMakeLists.txt:
Better port for ibmdb2i plugin
storage/innobase/CMakeLists.txt:
Run system checks.
Add names for static and dynamic storage engine
libraries.
storage/innobase/include/page0page.ic:
Fix compile error on OpenSolaris.
storage/myisam/CMakeLists.txt:
Port CmakeLists.txt to Unix
storage/myisammrg/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/mysql_storage_engine.cmake:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
support-files/CMakeLists.txt:
Configure and install some files from support-files.
support-files/Makefile.am:
Add new file
tests/CMakeLists.txt:
In general case, mysqlclient library can be dependent
on C++ runtime(if it includes yassl and is not compiled
with gcc or MSVC)
unittest/mysys/CMakeLists.txt:
Add unit tests
unittest/mysys/Makefile.am:
Add new file
unittest/mytap/CMakeLists.txt:
Add library for unit tests
unittest/mytap/Makefile.am:
Add new file
unittest/mytap/tap.c:
fix function definitions to match declarations
win/create_def_file.js:
Fix link error with intel compiler (icl
defines of special label for exception handler)
