The issue happens when the secondary keys are extended with primary
key parts. Inside the function TABLE_SHARE::init_from_binary_frm_image()
adds the length bytes for the primary key key parts to the length of the
secondary key. This is not needed because when the extended keys are
used we recalculate the length for the used key parts.
Also removed TABLE_SHARE::total_key_length as it is not used in the code
Apporved-by: Monty <monty@mariadb.org>
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
Problem:
=======
Upon deleting or updating a row in a parent table (with primary key), if
the child table has virtual column and an associated key with ON UPDATE
CASCADE/ON DELETE CASCADE, it will result in slave crash.
Analysis:
========
Tables which are related through foreign key require prelocking similar to
triggers. i.e If a table has triggers/foreign keys we should add all tables
and routines used by them to the prelocking set. This prelocking happens
during 'open_and_lock_tables' call. Each table being opened is checked for
foreign key references. If foreign key reference exists then the child
table is opened and it is linked to the table_list. Upon any modification
to parent table its corresponding child tables are retried from table_list
and they are updated accordingly. This prelocking work fine on master.
On slave prelocking works for following cases.
- Statement/mixed based replication
- In row based replication when trigger execution is enabled through
'slave_run_triggers_for_rbr=YES/LOGGING/ENFORCE'
Otherwise it results in an assert/crash, as the parent table will not find
the corresponding child table and it will be NULL. Dereferencing NULL
pointer leads to slave server exit.
Fix:
===
Introduce a new 'slave_fk_event_map' flag similar to 'trg_event_map'. This
flag will ensure that when foreign key is enabled in row based replication
all the parent and child tables are prelocked, so that parent is able to
locate the child table.
Note: This issue is specific to slave, hence only slave needs to be
upgraded.
This follows up commit
commit 94a520ddbe and
commit 7c5519c12d.
After these changes, the default test suites on a
cmake -DWITH_UBSAN=ON build no longer fail due to passing
null pointers as parameters that are declared to never be null,
but plenty of other runtime errors remain.
Reimplement MDEV-14275 Improving memory utilization for information schema
Postpone temp table instantiation until after setup_fields().
Replace all unused (not marked in read_set) columns in an I_S table
with CHAR(0). This can drastically reduce the footprint of a MEMORY
table (a TABLE_CATALOG alone is 1538 bytes per row).
This does not change the engine. If the table was decided to be Aria
(because of, say, blobs) then after optimization it'll stay Aria
even if all blobs were removed.
Note 1: when transforming table structure, share->blob_fields is
preserved, otherwise Aria might switch from DYNAMIC to STATIC row format
and expect a special field for a deleted mark, which create_tmp_tabe
didn't provide.
Note 2: optimizer was doing handler::info() (to know the number of rows)
before the temp table is populated. That didn't make much sense. Now
it's done before the table is even instantiated. Preserve the old
behavior and report 0 rows.
This reverts e2664ee836 and a8458a2345
In case of NATURAL JOIN / USING mark all field (one table can not be opened
in any case so optimisation does not worth it).
IMHO table should be checked for used fields and filled after prepare,
when we will fave whole info about used fields but it is too big change
for a bugfix. Which will be made later by Serg patch
* Allocate items on thd->mem_root while refixing vcol exprs
* Make vcol tree changes register and roll them back after the statement is executed.
Explanation:
Due to collation implementation specifics an Item tree could change while fixing.
The tricky thing here is to make it on a proper arena.
It's usually not a problem when a field is deterministic, however, makes a pain vice-versa, during allocation allocating.
A non-deterministic field should be refixed on each statement, since it depends on the environment state.
Changing the tree will be temporary and therefore it should be reverted after the statement execution.
For the case when the SJM scan table is the first table in the join order,
then if we want to do the sorting on the SJM scan table, then we need to
make sure that we unpack the values to base table fields in two cases:
1) Reading the SJM table and writing the sort-keys inside the sort-buffer
2) Reading the sorted data from the sort file
Fixed by:
- Make all quick_* variable allocated according to real number keys instead
of MAX_KEY
- Store all the quick* items in separated allocated structure (OPT_RANGE)
- Ensure we don't access any quick* variable without first checking
opt_range_keys.is_set(). Thanks to this, we don't need any
pre-initialization of quick* variables anymore.
Some renames was done to use the new structure:
table->quick_keys -> table->opt_range_keys
table->quick_rows[X] -> table->opt_range[X].rows
table->quick_key_parts[X] -> table->opt_range[X].key_parts
table->quick_costs[X] -> table->opt_range[X].cost
table->quick_index_only_costs[X] -> table->opt_range[X].index_only_cost
table->quick_n_ranges[X] -> table->opt_range[X].ranges
table->quick_condition_rows -> table->opt_range_condition_rows
This patch should both decrease memory needed for TABLE objects
(3528 -> 984 + keyinfo) and increase performance, thanks to less
initializations per query, and more localized memory, thanks to the
opt_range structure.
Starting from 10.3, the optimizer is able to detect that entire outer join
nests are constants (because of "Impossible ON") and remove them (see
mark_join_nest_as_const)
However, this was not properly accounted for in NESTED_JOIN structure
and the way check_interleaving_with_nj() uses its n_tables member to
check if the join prefix order is allowed.
(The result was that the optimizer could conclude that no join prefix is
allowed and fail an assertion)
reduce the amount of engine-specific code in the server,
particularly as it does not serve any purpose now.
may be needed for VP engine,
to be reconsidered in MDEV-7795
Previously multiple threads were allowed to load histograms concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, histograms loading is protected by
per-TABLE_SHARE atomic variable.
Whenever histograms were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever histograms have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If histograms are being loaded
concurrently, statement waits until load is completed.
- Table_statistics::total_hist_size moved to TABLE_STATISTICS_CB: only
meaningful within TABLE_SHARE (not used for collected stats).
- TABLE_STATISTICS_CB::histograms_can_be_read and
TABLE_STATISTICS_CB::histograms_are_read are replaced with a tri state
atomic variable.
- Simplified away alloc_histograms_for_table_share().
Note: there's still likely a data race if a thread attempts accessing
histograms data after it failed to load it (because of concurrent load).
It was there previously and goes out of the scope of this effort. One way
of fixing it could be reviving TABLE::histograms_are_read and adding
appropriate checks whenever it is needed.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
Previously multiple threads were allowed to load statistics concurrently.
There were no known problems caused by this. But given amount of data
races in this code, it'd happen sooner or later.
To avoid scalability bottleneck, statistics loading is protected by
per-TABLE_SHARE atomic variable.
Whenever statistics were loaded by preceding statement (hot-path), a
scalable load-acquire check is performed.
Whenever statistics have to be loaded anew, mutual exclusion for loaders
is established by atomic variable. If statistics are being loaded
concurrently, statement waits until load is completed.
TABLE_STATISTICS_CB::stats_can_be_read and
TABLE_STATISTICS_CB::stats_is_read are replaced with a tri state atomic
variable.
Part of MDEV-19061 - table_share used for reading statistical tables is
not protected
