Connector/NET does not expect collation IDs returned by "show collations"
to be NULL, runs into an exception.
The fix is to determine connector/net using its connection attributes,
then make sure "show collations" does not output NULL IDs.
The patch introduces new old_mode NO_NULL_COLLATION_IDs, that is
automatically set, once MySQL Connector/NET connection is determined.
A test was added, that uses MySql.Data from powershell - only works
if MySql.Data is installed into GAC (i.e with C/NET MSI package)
This is the follow-up patch that removes explicit use of thd->stmt_arena
for memory allocation and replaces it with call of the method
THD::active_stmt_arena_to_use()
Additionally, this patch adds extra DBUG_ASSERT to check that right
query arena is in use.
This is caused by fact that VARIABLE_VALUE is defined in
variables_fields_info (sql_show.cc) as 2048.
wsrep_provider_options contain few path variables and
this could cause string truncation on deep and long
directory paths.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
In some cases "SHOW PROCESSLIST" could show "Reset for next command"
as State, even if the previous query had finished properly.
Fixed by clearing State after end of command and also setting the State
for the "Connect" command.
Other things:
- Changed usage of 'thd->set_command(COM_SLEEP)' to
'thd->mark_connection_idle()'.
- Changed thread_state_info() to return "" instead of NULL. This is
just a safety measurement and in line with the logic of the
rest of the function.
standard table KEY_COLUMN_USAGE should only show keys where
a user has some privileges on every column of the key
standard table TABLE_CONSTRAINTS should show tables where
a user has any non-SELECT privilege on the table or on any column
of the table
standard table REFERENTIAL_CONSTRAINTS is defined in terms of
TABLE_CONSTRAINTS, so the same rule applies. If the user
has no rights to see the REFERENCED_TABLE_NAME value, it should be NULL
SHOW INDEX (and STATISTICS table) is non-standard, but it seems
reasonable to use the same logic as for KEY_COLUMN_USAGE.
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
Fixed memory leak taken place on executing a prepared statement or
a stored routine that querying a view and this view constructed
on an information schema table. For example,
Lets consider the following definition of the view 'v1'
CREATE VIEW v1 AS SELECT table_name FROM information_schema.views
ORDER BY table_name;
Querying this view in PS mode result in hit of assert.
PREPARE stmt FROM "SELECT * FROM v1";
EXECUTE stmt;
EXECUTE stmt; (*)
Running the statement marked with (*) leads to a crash in case
server build with mode to control allocation of a memory from SP/PS
memory root on the second and following executions of PS/SP.
The reason of leaking the memory is that a memory allocated on
processing of FRM file for the view requested from a PS/PS memory
root meaning that this memory be released only when a stored routine
be evicted from SP-cache or a prepared statement be deallocated
that typically happens on termination of a user session.
To fix the issue switch to a memory root specially created for
allocation of short-lived objects that requested on parsing FRM.
This commits enables reloading of engine-independent statistics
without flushing the table from table definition cache.
This is achieved by allowing multiple version of the
TABLE_STATISTICS_CB object and having independent pointers to it in
TABLE and TABLE_SHARE. The TABLE_STATISTICS_CB object have reference
pointers and are freed when no one is pointing to it anymore.
TABLE's TABLE_STATISTICS_CB pointer is updated to use the
TABLE_SHARE's pointer when read_statistics_for_tables() is called at
the beginning of a query.
Main changes:
- read_statistics_for_table() will allocate an new TABLE_STATISTICS_CB
object.
- All get_stat_values() functions has a new parameter that tells
where collected data should be stored. get_stat_values() are not
using the table_field object anymore to store data.
- All get_stat_values() functions returns 1 if they found any
data in the statistics tables.
Other things:
- Fixed INSERT DELAYED to not read statistics tables.
- Removed Statistics_state from TABLE_STATISTICS_CB as this is not
needed anymore as wer are not changing TABLE_SHARE->stats_cb while
calculating or loading statistics.
- Store values used with store_from_statistical_minmax_field() in
TABLE_STATISTICS_CB::mem_root. This allowed me to remove the function
delete_stat_values_for_table_share().
- Field_blob::store_from_statistical_minmax_field() is implemented
but is not normally used as we do not yet support EIS statistics
for blobs. For example Field_blob::update_min() and
Field_blob::update_max() are not implemented.
Note that the function can be called if there is an concurrent
"ALTER TABLE MODIFY field BLOB" running because of a bug in
ALTER TABLE where it deletes entries from column_stats
before it has an exclusive lock on the table.
- Use result of field->val_str(&val) as a pointer to the result
instead of val (safetly fix).
- Allocate memory for collected statistics in THD::mem_root, not in
in TABLE::mem_root. This could cause the TABLE object to grow if a
ANALYZE TABLE was run many times on the same table.
This was done in allocate_statistics_for_table(),
create_min_max_statistical_fields_for_table() and
create_min_max_statistical_fields_for_table_share().
- Store in TABLE_STATISTICS_CB::stats_available which statistics was
found in the statistics tables.
- Removed index_table from class Index_prefix_calc as it was not used.
- Added TABLE_SHARE::LOCK_statistics to ensure we don't load EITS
in parallel. First thread will load it, others will reuse the
loaded data.
- Eliminate read_histograms_for_table(). The loading happens within
read_statistics_for_tables() if histograms are needed.
One downside is that if we have read statistics without histograms
before and someone requires histograms, we have to read all statistics
again (once) from the statistics tables.
A smaller downside is the need to call alloc_root() for each
individual histogram. Before we could allocate all the space for
histograms with a single alloc_root.
- Fixed bug in MyISAM and Aria where they did not properly notice
that table had changed after analyze table. This was not a problem
before this patch as then the MyISAM and Aria tables where flushed
as part of ANALYZE table which did hide this issue.
- Fixed a bug in ANALYZE table where table->records could be seen as 0
in collect_statistics_for_table(). The effect of this unlikely bug
was that a full table scan could be done even if
analyze_sample_percentage was not set to 1.
- Changed multiple mallocs in a row to use multi_alloc_root().
- Added a mutex protection in update_statistics_for_table() to ensure
that several tables are not updating the statistics at the same time.
Some of the changes in sql_statistics.cc are based on a patch from
Oleg Smirnov <olernov@gmail.com>
Co-authored-by: Oleg Smirnov <olernov@gmail.com>
Co-authored-by: Vicentiu Ciorbaru <cvicentiu@gmail.com>
Reviewer: Sergei Petrunia <sergey@mariadb.com>
make TRANSACTIONAL table option behave similar to other engine-defined
table options. If the engine doesn't suport it:
* if specified expicitly in CREATE or ALTER - it's ER_UNKNOWN_OPTION
* an error or a warning depending on sql_mode IGNORE_BAD_TABLE_OPTIONS
* in ALTER TABLE from the engine that suppors it to the engine that
doesn't - silently preserved (no warning)
* it is commented out in SHOW CREATE unless IGNORE_BAD_TABLE_OPTIONS
The effect was that that ROOT_FLAG_THREAD_SPECIFIC was cleared and
the memory allocated by memroot would be contributed the the system,
not to the thread.
This exposed a bug in how "show explain for ..." allocated data.
- The thread that did provide the explain allocated data in the
"show explain" threads mem_root, which is marked as THREAD_SPECIFIC.
- Fixed by allocating the explain data in a temporary explain_mem_root
which is not THREAD_SPECIFIC.
Other things:
- Added extra checks when using update_malloc_size()
- Do not call update_malloc_size() for memory not registered with
update_malloc_size(). This avoid some wrong 'memory not freed' reports.
- Added a checking of 'thd->killed' to ensure that
main.truncate_notembedded.test still works.
Reported by: Yury Chaikou
Subselect_single_value_engine cannot handle table value constructor used as
subquery. That's why any table value constructor TVC used as subquery is
converted into a select over derived table whose specification is TVC.
Currently the names of the columns of the derived table DT are taken from
the first element of TVC and if the k-th component of the element happens
to be a subquery the text representation of this subquery serves as the
name of the k-th column of the derived table. References of all columns of
the derived table DT compose the select list of the result of the conversion.
If a definition of a view contained a table value constructor used as a
subquery and the view was registered after this conversion had been
applied we could register an invalid view definition if the first element
of TVC contained a subquery as its component: the name of this component
was taken from the original subquery, while the name of the corresponding
column of the derived table was taken from the text representation of the
subquery produced by the function SELECT_LEX::print() and these names were
usually differ from each other.
To avoid registration of such invalid views the function SELECT_LEX::print()
now prints the original TVC instead of the select in which this TVC has
been wrapped. Now the specification of registered view looks like as if no
conversions from TVC to selects were done.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
This patch also fixes some bugs detected by valgrind after this
patch:
- Not enough copy_func elements was allocated by Create_tmp_table() which
causes an memory overwrite in Create_tmp_table::add_fields()
I added an ASSERT() to be able to detect this also without valgrind.
The bug was that TMP_TABLE_PARAM::copy_fields was not correctly set
when calling create_tmp_table().
- Aria::empty_bits is not allocated if there is no varchar/char/blob
fields in the table. Fixed code to take this into account.
This cannot cause any issues as this is just a memory access
into other Aria memory and the content of the memory would not be used.
- Aria::last_key_buff was not allocated big enough. This may have caused
issues with rtrees and ma_extra(HA_EXTRA_REMEMBER_POS) as they
would use the same memory area.
- Aria and MyISAM didn't take extended key parts into account, which
caused problems when copying rec_per_key from engine to sql level.
- Mark asan builds with 'asan' in version strihng to detect these in
not_valgrind_build.inc.
This is needed to not have main.sp-no-valgrind fail with asan.
This patch is the result of running
run-clang-tidy -fix -header-filter=.* -checks='-*,modernize-use-equals-default' .
Code style changes have been done on top. The result of this change
leads to the following improvements:
1. Binary size reduction.
* For a -DBUILD_CONFIG=mysql_release build, the binary size is reduced by
~400kb.
* A raw -DCMAKE_BUILD_TYPE=Release reduces the binary size by ~1.4kb.
2. Compiler can better understand the intent of the code, thus it leads
to more optimization possibilities. Additionally it enabled detecting
unused variables that had an empty default constructor but not marked
so explicitly.
Particular change required following this patch in sql/opt_range.cc
result_keys, an unused template class Bitmap now correctly issues
unused variable warnings.
Setting Bitmap template class constructor to default allows the compiler
to identify that there are no side-effects when instantiating the class.
Previously the compiler could not issue the warning as it assumed Bitmap
class (being a template) would not be performing a NO-OP for its default
constructor. This prevented the "unused variable warning".
