mirror of
https://github.com/esp8266/Arduino.git
synced 2025-04-19 23:22:16 +03:00
238 lines
6.9 KiB
ReStructuredText
238 lines
6.9 KiB
ReStructuredText
:orphan:
|
|
|
|
Soft Access Point Class
|
|
-----------------------
|
|
|
|
Section below is ESP8266 specific as `Arduino WiFi library <https://www.arduino.cc/en/Reference/WiFi>`__ documentation does not cover soft access point. The API description is broken down into three short chapters. They cover how to setup soft-AP, manage connection, and obtain information on soft-AP interface configuration.
|
|
|
|
Table of Contents
|
|
-----------------
|
|
|
|
- `Set up Network <#set-up-network>`__
|
|
|
|
- `softAP <#softap>`__
|
|
- `softAPConfig <#softapconfig>`__
|
|
|
|
- `Manage Network <#manage-network>`__
|
|
|
|
- `softAPdisconnect <#softapdisconnect>`__
|
|
- `softAPgetStationNum <#softapgetstationnum>`__
|
|
|
|
- `Network Configuration <#network-configuration>`__
|
|
|
|
- `softAPIP <#softapip>`__
|
|
- `softAPmacAddress <#softapmacaddress>`__
|
|
|
|
Set up Network
|
|
~~~~~~~~~~~~~~
|
|
|
|
This section describes functions to set up and configure ESP8266 in the soft access point (soft-AP) mode.
|
|
|
|
softAP
|
|
^^^^^^
|
|
|
|
Set up a soft access point to establish a Wi-Fi network.
|
|
|
|
The simplest version (`an overload in C++
|
|
terms <https://en.wikipedia.org/wiki/Function_overloading>`__) of this function requires only one parameter and is used to set up an open Wi-Fi network.
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAP(ssid)
|
|
|
|
To set up password protected network, or to configure additional network parameters, use the following overload:
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAP(ssid, password, channel, hidden, max_connection)
|
|
|
|
The first parameter of this function is required, remaining four are optional.
|
|
|
|
Meaning of all parameters is as follows:
|
|
|
|
- ``ssid`` - character string containing network SSID (max. 31 characters)
|
|
- ``password`` - optional character string with a password. For WPA2-PSK network it should be at least 8 character long. If not specified, the access point will be open for anybody to connect, (max. 63 characters).
|
|
- ``channel`` - optional parameter to set Wi-Fi channel, from 1 to 13. Default channel = 1.
|
|
- ``hidden`` - optional parameter, if set to ``true`` will hide SSID.
|
|
- ``max_connection`` - optional parameter to set max simultaneous connected stations, `from 0 to 8 <https://bbs.espressif.com/viewtopic.php?f=46&t=481&p=1832&hilit=max_connection#p1832>`__. Defaults to 4. Once the max number has been reached, any other station that wants to connect will be forced to wait until an already connected station disconnects.
|
|
|
|
Function will return ``true`` or ``false`` depending on result of setting the soft-AP.
|
|
|
|
Notes:
|
|
|
|
- The network established by softAP will have default IP address of 192.168.4.1. This address may be changed using ``softAPConfig`` (see below).
|
|
- Even though ESP8266 can operate in soft-AP + station mode, it actually has only one hardware channel. Therefore in soft-AP + station mode, the soft-AP channel will default to the number used by station. For more information how this may affect operation of stations connected to ESP8266's soft-AP, please check `this FAQ entry <http://bbs.espressif.com/viewtopic.php?f=10&t=324>`__ on Espressif forum.
|
|
|
|
softAPConfig
|
|
^^^^^^^^^^^^
|
|
|
|
Configure the soft access point's network interface.
|
|
|
|
.. code:: cpp
|
|
|
|
softAPConfig (local_ip, gateway, subnet)
|
|
|
|
All parameters are the type of ``IPAddress`` and defined as follows:
|
|
|
|
- ``local_ip`` - IP address of the soft access point
|
|
- ``gateway`` - gateway IP address
|
|
- ``subnet`` - subnet mask
|
|
|
|
Function will return ``true`` or ``false`` depending on result of changing the configuration.
|
|
|
|
*Example code:*
|
|
|
|
.. code:: cpp
|
|
|
|
#include <ESP8266WiFi.h>
|
|
|
|
IPAddress local_IP(192,168,4,22);
|
|
IPAddress gateway(192,168,4,9);
|
|
IPAddress subnet(255,255,255,0);
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
Serial.println();
|
|
|
|
Serial.print("Setting soft-AP configuration ... ");
|
|
Serial.println(WiFi.softAPConfig(local_IP, gateway, subnet) ? "Ready" : "Failed!");
|
|
|
|
Serial.print("Setting soft-AP ... ");
|
|
Serial.println(WiFi.softAP("ESPsoftAP_01") ? "Ready" : "Failed!");
|
|
|
|
Serial.print("Soft-AP IP address = ");
|
|
Serial.println(WiFi.softAPIP());
|
|
}
|
|
|
|
void loop() {}
|
|
|
|
*Example output:*
|
|
|
|
::
|
|
|
|
Setting soft-AP configuration ... Ready
|
|
Setting soft-AP ... Ready
|
|
Soft-AP IP address = 192.168.4.22
|
|
|
|
Manage Network
|
|
~~~~~~~~~~~~~~
|
|
|
|
Once soft-AP is established you may check the number of stations connected, or shut it down, using the following functions.
|
|
|
|
softAPgetStationNum
|
|
^^^^^^^^^^^^^^^^^^^
|
|
|
|
Get the count of the stations that are connected to the soft-AP interface.
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAPgetStationNum()
|
|
|
|
*Example code:*
|
|
|
|
.. code:: cpp
|
|
|
|
Serial.printf("Stations connected to soft-AP = %d\n", WiFi.softAPgetStationNum());
|
|
|
|
*Example output:*
|
|
|
|
::
|
|
|
|
Stations connected to soft-AP = 2
|
|
|
|
Note: the maximum number of stations that may be connected to ESP8266 soft-AP is 4 by default. This can be changed from 0 to 8 via the ``max_connection`` argument of the softAP method.
|
|
|
|
softAPdisconnect
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
Disconnect stations from the network established by the soft-AP.
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAPdisconnect(wifioff)
|
|
|
|
Function will set currently configured SSID and password of the soft-AP to null values. The parameter ``wifioff`` is optional. If set to ``true`` it will switch the soft-AP mode off.
|
|
|
|
Function will return ``true`` if operation was successful or ``false`` if otherwise.
|
|
|
|
Network Configuration
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Functions below provide IP and MAC address of ESP8266's soft-AP.
|
|
|
|
softAPIP
|
|
^^^^^^^^
|
|
|
|
Return IP address of the soft access point's network interface.
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAPIP()
|
|
|
|
Returned value is of ``IPAddress`` type.
|
|
|
|
*Example code:*
|
|
|
|
.. code:: cpp
|
|
|
|
Serial.print("Soft-AP IP address = ");
|
|
Serial.println(WiFi.softAPIP());
|
|
|
|
*Example output:*
|
|
|
|
::
|
|
|
|
Soft-AP IP address = 192.168.4.1
|
|
|
|
softAPmacAddress
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
Return MAC address of soft access point. This function comes in two versions, which differ in type of returned values. First returns a pointer, the second a ``String``.
|
|
|
|
Pointer to MAC
|
|
''''''''''''''
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAPmacAddress(mac)
|
|
|
|
Function accepts one parameter ``mac`` that is a pointer to memory location (an ``uint8_t`` array the size of 6 elements) to save the mac address. The same pointer value is returned by the function itself.
|
|
|
|
*Example code:*
|
|
|
|
.. code:: cpp
|
|
|
|
uint8_t macAddr[6];
|
|
WiFi.softAPmacAddress(macAddr);
|
|
Serial.printf("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n", macAddr[0], macAddr[1], macAddr[2], macAddr[3], macAddr[4], macAddr[5]);
|
|
|
|
*Example output:*
|
|
|
|
::
|
|
|
|
MAC address = 5e:cf:7f:8b:10:13
|
|
|
|
MAC as a String
|
|
'''''''''''''''
|
|
|
|
Optionally you can use function without any parameters that returns a ``String`` type value.
|
|
|
|
.. code:: cpp
|
|
|
|
WiFi.softAPmacAddress()
|
|
|
|
*Example code:*
|
|
|
|
.. code:: cpp
|
|
|
|
Serial.printf("MAC address = %s\n", WiFi.softAPmacAddress().c_str());
|
|
|
|
*Example output:*
|
|
|
|
::
|
|
|
|
MAC address = 5E:CF:7F:8B:10:13
|
|
|
|
For code samples please refer to separate section with `examples <soft-access-point-examples.rst>`__ dedicated specifically to the Soft Access Point Class.
|