mirror of
https://github.com/esp8266/Arduino.git
synced 2025-11-03 14:33:37 +03:00
71 lines
2.0 KiB
ReStructuredText
71 lines
2.0 KiB
ReStructuredText
AVR In-System Programming over WiFi for ESP8266
|
|
===============================================
|
|
|
|
This library allows an ESP8266 module with the HSPI port available to
|
|
become an AVR In-System Programmer.
|
|
|
|
Hardware
|
|
--------
|
|
|
|
The ESP8266 module connects to the AVR target chip via the standard
|
|
6-pin AVR "Recommended In-System Programming Interface Connector Layout"
|
|
as seen in `AVR910 <http://www.atmel.com/images/doc0943.pdf>`__ among
|
|
other places.
|
|
|
|
If the AVR target is powered by a different Vcc than what powers your
|
|
ESP8266 chip, you **must provide voltage level shifting** or some other
|
|
form of buffers. Exposing the pins of ESP8266 to anything larger than
|
|
3.6V will damage it.
|
|
|
|
Connections are as follows:
|
|
|
|
+-----------+-------------+
|
|
| ESP8266 | AVR / SPI |
|
|
+===========+=============+
|
|
| GPIO12 | MISO |
|
|
+-----------+-------------+
|
|
| GPIO13 | MOSI |
|
|
+-----------+-------------+
|
|
| GPIO14 | SCK |
|
|
+-----------+-------------+
|
|
| any\* | RESET |
|
|
+-----------+-------------+
|
|
|
|
For RESET use a GPIO other than 0, 2 and 15 (bootselect pins), and apply
|
|
an external pullup/down so that the target is normally running.
|
|
|
|
Usage
|
|
-----
|
|
|
|
See the included example. In short:
|
|
|
|
.. code:: arduino
|
|
|
|
|
|
// Create the programmer object
|
|
ESP8266AVRISP avrprog(PORT, RESET_PIN)
|
|
// ... with custom SPI frequency
|
|
ESP8266AVRISP avrprog(PORT, RESET_PIN, 4e6)
|
|
|
|
// Check current connection state, but don't perform any actions
|
|
AVRISPState_t state = avrprog.update();
|
|
|
|
// Serve the pending connection, execute STK500 commands
|
|
AVRISPState_t state = avrprog.serve();
|
|
|
|
License and Authors
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
This library started off from the source of ArduinoISP "sketch" included
|
|
with the Arduino IDE:
|
|
|
|
::
|
|
|
|
ArduinoISP version 04m3
|
|
Copyright (c) 2008-2011 Randall Bohn
|
|
If you require a license, see
|
|
http://www.opensource.org/licenses/bsd-license.php
|
|
|
|
Support for TCP on ESP8266
|
|
Copyright (c) Kiril Zyapkov <kiril@robotev.com>.
|