Claas Flint 1475ed7d49 ENC28J60: add missing end() required by LwipIntfDev (#9323) ...

LwipIntfDev<RawDev> calls RawDev::end() from LwipIntfDev::end() and from the two
error paths of LwipIntfDev::begin(). Wiznet5500 provides end(), ENC28J60 does
not, so LwipIntfDev<ENC28J60> - i.e. ENC28J60lwIP - no longer compiles:

  LwipIntfDev.h:280:20: error: 'end' is not a member of 'ENC28J60'
  LwipIntfDev.h:294:24: error: 'end' is not a member of 'ENC28J60'

The calls came in with #9023, which only touched cores/esp8266/LwipIntfDev.h.

Wiznet5500::end() closes socket 0 and leaves the chip powered and configured,
since a following begin() resets and reopens it anyway. The ENC28J60 equivalent
of closing the socket is clearing ECON1.RXEN, the bit that reset() sets last to
enable reception. ECON1 is mapped into every bank, so no bank switch is needed,
and no frame can be in flight because sendFrame() polls ECON1.TXRTS until the
frame has left.

2026-08-27 14:20:56 +03:00

..

src

ENC28J60: add missing end() required by LwipIntfDev (#9323)

2026-08-27 14:20:56 +03:00

library.properties

Use valid categories in library.properties of bundled libraries (#8221)

2021-07-17 11:00:14 -07:00