Default mode (no exceptions) will no longer use the stdc++ library new
allocator when there is not enough memory. Instead, it will return
nullptr. This is the pre-exceptions-available behavior (2.5.0 and
earlier).
When exceptions are enabled, use the real new and throw exceptions that
can be caught at higher levels, or which will crash the app with an
uncaught exception if they're not handled.
Update to #6309
Fixes#2090
The Updater checks that an update isn't already in progress on ::begin,
but when an error happens in the middle of an upload it's impossible to
actually reset this flag w/o a reboot.
Reset the state members (esp. _size) on any error condition so
that you can restart the transfer with a new ::begin. Any error
condition is fatal, anyway, so there is no reason not to clear the
current state at that point.
The SPIFFS config object was defined in FS.h in its own namespace, but
is not made easily available like other SPIFFS and FS objects because of
a missing `using` statement. Add it in FS.h
Fixes#6322
* Upgrade to 2.5.0-4 toolchain w/improved pgm_read_x
Rebuild the entire toolchain (including standard libraries) with the
latest pgm_read_xxx headers included (which fix unaligned dword reads
from progmem and run faster/smaller, and a pgm_read_byte change which
removes an instruction on each read saving flash).
Pull in latest bearssl while we're at it, too, which speeds up EC
handshakes and reduced ROM usage, too.
* Fix C++ exceptions
Exception code now only does 32b aligned reads from progmem to access
the eh_table (some via -mforce-l32, some via hand-inserted pgm_read_x
macros).
Fixes#6151Fixes#6305Fixes#6198
Fixes#6068
Drop from the tools key all version:"1.20.0-26-gb404fb9" entries (which
were pre-2.0.0 and whose entry in platform versions was deleted on last
release).
* workaround when an exceptin occurs while in an ISR
* tuning for gdb
* remove dead code and rename defines/variables
* per reviews: naming, handle "unhandled return" case
* fix reset message
* Created empty method
* Changed method name from "empty" to "isEmpty". Created a new method to empty a string
* Changed method name from "empty" to "clear".
Cleans up all warnings seen w/GCC 9.1 to allow it to track the main
branch more easily until 3.x.
Does not include Ticker.h "fix" of pragmas around a function cast we're
doing that GCC9 doesn't like, that will be addressed separately and
maybe only in the 3.0 branch.
Does not include GDB hook fix, either, because the pragmas required
to disable the GCC9.1 warnings don't exist in 4.8 at all.
* Add a dump of received FP and CERT when in debug mode
To simplify BearSSL debugging, print the received FP (when it doesn't
match the expected) and the binary certificate (always), when in debug
mode.
* Add documentation section on FP mismatch in rare instances.
Without this the compiler may use memory references loaded to registers before the fence, in computation within the fence. These values could have changed before xt_rsil()
(critical section start) was called.
Note: this is needed to stop the compiler from reordering instructions at the critical section boundary.
* Prepare signing before sketch is compiled
This makes the right value available in ARDUINO_SIGNING in the sketch.
* Remove unnecessary .1s and fix packager script
- Add HelloEspnow.ino example to demonstrate the ESP-NOW mesh backend features.
- Deprecate the ESP8266WiFiMesh class in favour of the new ESP-NOW and TCP/IP backends.
- Update the TCP/IP mesh backend to use the new lwIP version preprocessor flag and remove obsolete preprocessor flags.
* enable by default latest 2.2.x firmware, including fixed espnow
* LittleFS: avoid crash when FS size is 0
* flash size defaults: 1M for generic board, not empty FS for all
* Make SPIFFS be an integer number of blocks
boards.txt.py simply calculated the end and start using flash sizes, but
in cases where an 8K page was used (>512KB SPIFFS), this could leave a
4K half-block left at the end of SPIFFS.
mkspiffs and the SPIFFS code uses integer division to calculate the
maximum block number, so it worked fine in practice and the code simply
ignored the extra, fractional block.
Now actually take block size into account when calculating the end of
SPIFFS, ensuring no fractional blocks are passed in. Does not result in
data loss on pre-existing SPIFFS filesystems.
* Fix the 1m512 case and clean up code
Ensure that no SPIFFS_block in the LD files is modified from the
original to endure correct backwards compatibility
* Factor out common if, clean code
* Make boards.py vars "fs_xx" instead of "spiffs_xx"
* Add support for newer mobile OS changes.
Took me quite a while to figure this out, but according to this issue (https://github.com/espressif/arduino-esp32/issues/1037), in order to get a captive notification to show or the popup to open, the DNS server must resolve to a public IP. It will not work with a pivate one (e.g. 192.168.4.1).
On Android, a notification ("Register with Network") is displayed in top left notification bar.
On IOS, the login popup is displayed.
* Add support for newer mobile OS changes.
Took me quite a while to figure this out, but according to this issue (espressif/arduino-esp32#1037), in order to get a captive notification to show or the popup to open, the DNS server must resolve to a public IP. It will not work with a pivate one (e.g. 192.168.4.1).
On Android, a notification ("Register with Network") is displayed in top left notification bar.
On IOS, the login popup is displayed.
Apply most compatible changes needed to get the core compiling under GCC
7.2 to the main gcc 4.8 tree to ease porting for 3.0.0.
Update pgmspace.h with corrected and optimized unaligned pgm_read
macros. Now pgm_read_dword in the unaligned case gives proper results
even if optimization is enabled and is also written in assembly and only
1 instruction longer than the pgm_read_byte macro (which also has been
optimized to reduce 1 instruction). These changes should marginally
shrink code and speed up flash reads accordingly.
The toolchain should/will be rebuilt at a later time with this
optimization to ensure it's used in the libc.a/etc. files.
After verifying that they really were spurious, clean up the warnings
that gcc -wextra reports, except for LeaMDNS.
Upgrade GCC to gcc-7 for host builds
* TCP connect and send delay fix
Implement early exit as connection established or data already sent.
(Previous implementation was exiting only on timeout expired)
* Convert ESP8266WebServer* into templatized model
Supercedes #4912
Refactor the three versions of ESP8266WebServer and *WebServerSecure to a
single templated class. Use "using" to enable old, non-templated names to b
used (so no user changes required to compile or run).
Fixes#4908 and clean up the code base a lot.
Basic tests run (the ones in the example code).
No code changes are required in userland except for setting the SSL
certificates which now use a cleaner "getServer()" accessor and lets the
app use the native BearSSL calls on the WiFiClientSecure object.
@devyte should be proud, it removes virtuals and even has template specialization...
* Fix HTTPUpdate templates and examples
* Fix HTTPUpdateServer library build
Need to remove dot-a linkage since there are no .cpp files in the
directory anymore due to templates.
* Provide backward-compat names for updt template
Allow existing code to use the same well known names for
HTTPUpdateSecure.
* Remove ClientType from all templates, auto-infer
Remove the ClientType template parameter from all objects. Simplifies
the code and makes it more foolproof.
Add a "using" in each server to define the type of connection returned
by all servers, which is then used in the above templates automatically.
* Can safely include FS.h now that SD/SPIFFS unified
* Move the templates/objects to their own namespaces
* Fix merge issues with untemplated methods
* Address review comments
* Fix mock test, remove warnings inside test dir
Make the simple mock test CI job pass and clean up
any spurious warnings in the test directory.
There still are warnings in the libraries and core, but they
should be addressed in a separate PR.
Default interface is STA (or AP if available and STA is unavailable).
An interface can also be specified in ::begin() by its IP address.
MDNS will not cross interfaces (there is currently no notion of "bridged interfaces")
Multiple instances should be working, this is not tested in this commit.
* Fix device test environment variables
Device tests were not connecting properly to WiFi because the
environment variables were not set when WiFi.connect was called.
This would result in tests sometimes working *if* the prior sketch run
on the ESP saved WiFi connection information and auto-connect was
enabled. But, in most cases, the tests would simply never connect to
any WiFi and fail.
getenv() works only after BS_RUN is called (because BS_RUN handles the
actual parsing of environment variables sent from the host).
Add a "pretest" function to all tests which is called by the host test
controller only after all environment variables are set. Move all
WiFi/etc. operations that were in each separate test's setup() into it.
So the order of operations for tests now is:
ESP: setup()
-> Set serial baud
-> Call BS_RUN()
HOST: Send environment
Send "do pretest"
ESP: pretest()
-> Set Wifi using env. ariables, etc. return "true" on success
HOST: Send "run test 1"
ESP: Run 1st test, return result
HOST: Send "run test 2"
ESP: Run 2nd test, return result
<and so forth>
If nothing is needed to be set up, just return true from the pretest
function.
All tests now run and at least connect to WiFi. There still seem to be
some actual test errors, but not because of the WiFi/environment
variables anymore.
* Remove unneeded debug prints
* Silence esptool.py output when not in V=1 mode
Esptool-ck.exe had an option to be silent, but esptool.py doesn't so the
output is very chatty and makes looking a the run logs hard (60 lines
of esptool.py output, 3 lines of actual test reports).
Redirect esptool.py STDOUT to /dev/null unless V=1 to clear this up.
* Speed up builds massively by removing old JSON
arduino-builder checks the build.options.json file and then goes off and
pegs my CPU at 100% for over a minute on each test compile checking if
files have been modified.
Simply deleting any pre-existing options.json file causes this step to
be skipped and a quick, clean recompile is done in siginificantly less
time.
* Enable compile warnings, fix any that show up
Enable all GCC warnings when building the tests and fix any that came up
(mostly signed/unsigned, unused, and deprecated ones).
* Fix UMM_MALLOC printf crash, umm_test
Printf can now handle PROGMEM addresses, so simplify and correct the
debug printouts in umm_info and elsewhere.
* scheduled function: replacing new by malloc needs to initialize complex members
Functional was not initialized because of malloc() instead of new.
First assignment calls destructor on initial value which was not constructed (->frozen,wdt).
Fixes#6220
MklittleFS had different configuration options which affected small
files and could result in crashes or corruption on upload.
Update mklittlefs tool to one that matches the config of the current
library.
You will need to re-run tools/get.py to get the new tool version if you
are running from Git.
